Local Measurement of Gas-Liquid Bubbly Flow with a Double-Sensor Probe

A double-sensor probe was used to measure local interfacial parameters of a gas-liquid bubbly flow in a horizontal tube. The parameters included void fraction, interfacial concentration, bubble size distribution, bubble frequency and bubble interface velocity. The authors paid special attention to the probe design and construction for minimizing measurement errors. Measures were also taken in the design of sensor ends for preventing corrosions in the flow. This is an effort to improve the current double-sensor probe technique to meet the ever-increasing needs to local parameter measurements in gas-liquid two-phase flows.

Liquid holdup measurement with double helix capacitance sensor in horizontal oil-water two-phase flow pipes

This paper presents the characteristics of a double helix capacitance sensor for measurement of the liquid holdup in horizontal oil–water two-phase flow. The finite element method is used to calculate the sensitivity field of the sensor in a pipe with 20 mm inner diameter and the effect of sensor geometry on the distribution of sensitivity field is presented. Then, a horizontal oil–water two-phase flow experiment is carried out to measure the response of the double helix capacitance sensor, in which a novel method is proposed to calibrate the liquid holdup based on three pairs of parallel-wire capacitance probes. The performance of the sensor is analyzed in terms of the flow structures detected by mini-conductance array probes.

Modeling and identification for soft sensor systems based on the separation of multi-dynamic and static characteristics

Data-driven soft sensor is an effective solution to provide rapid and reliable estimations for key quality variables online. The secondary variables affect the primary variable in considerably different speed, and soft sensor systems exhibit multi-dynamic characteristics. Thus, the first contribution is improving the model in the previous study with multi-time-constant. The characteristics-separation-based model will be identified in substep way,and the stochastic Newton recursive(SNR) algorithm is adopted. Considering the dual-rate characteristics of soft sensor systems, the proposed model cannot be identified directly. Thus, two auxiliary models are first proposed to offer the intersample estimations at each update period, based on which the improved algorithm(DAM-SNR) is derived. These two auxiliary models function in switching mechanism which has been illustrated in detail. This algorithm serves for the identification of the proposed model together with the SNR algorithm, and the identification procedure is then presented. Finally, the laboratorial case confirms the effectiveness of the proposed soft sensor model and the algorithms.

Design of tooth color measurement system based on silicon double P-N junction color sensor

Working principles of silicon double P-N junction color sensor are introduced and a color measurement system to distinguish tooth color difference is designed in this paper.This system consists of silicon double P-N junction,a small optical fiber probe,signal process circuit and an MSP430FG439 single-chip system.Small in size,this system can measure different parts of the tooth in a fast and convenient way with high-accuracy.Thus,this system will be very promising in building prosthodontics and tooth fabrication.

A 10-bit column-parallel cyclic ADC for high-speed CMOS image sensors

This paper presents a high-speed column-parallel cyclic analog-to-digital converter（ADC） for a CMOS image sensor.A correlated double sampling（CDS） circuit is integrated in the ADC,which avoids a stand-alone CDS circuit block.An offset cancellation technique is also introduced,which reduces the column fixed-pattern noise（FPN） effectively.One single channel ADC with an area less than 0.02 mm^2 was implemented in a 0.13μm CMOS image sensor process.The resolution of the proposed ADC is 10-bit,and the conversion rate is 1.6 MS/s. The measured differential nonlinearity and integral nonlinearity are 0.89 LSB and 6.2 LSB together with CDS, respectively.The power consumption from 3.3 V supply is only 0.66 mW.An array of 48 10-bit column-parallel cyclic ADCs was integrated into an array of CMOS image sensor pixels.The measured results indicated that the ADC circuit is suitable for high-speed CMOS image sensors.