Nonlinear thermo-mechanical stability of eccentrically stiffened functionally graded material sandwich doubly curved shallow shells with general sigmoid law and power law according to third-order shear deformation theory

In this paper, the nonlinear analysis of stability of functionally graded ma- terial （FGM） sandwich doubly curved shallow shells is studied under thermo-mechanical loads with material properties obeying the general sigmoid law and power law of four ma- terial models. Shells are reinforced by the FGM stiffeners and rest on elastic foundations. Theoretical formulations are derived by the third-order shear deformation theory （TSDT） with the von Karman-type nonlinearity taking into account the initial geometrical im- perfection and smeared stiffener technique. The explicit expressions for determining the critical buckling load and the post-buckling mechanical and thermal load-deflection curves are obtained by the Galerkin method. Two iterative algorithms are presented. The effects of the stiffeners, the thermal element, the distribution law of material, the initial imper- fection, the foundation, and the geometrical parameters on buckling and post-buckling of shells are investigated.

Fabrication of intercalated p-aminobenzoic acid into Zn-Ti layered double hydroxide and its application as UV absorbent

An organic ultraviolet （UV） ray absorbent, p-aminobenzoic acid （PABA） was intercalated into a Zn-Ti layered double hydroxide （LDH） precursor by an anion-exchange reaction to obtain ZnTi-PABA-LDH, a new organic-inorganic nanocomposite. The structure and the thermal stability of ZnTi-PABA-LDH were characterized by XRD, FT-IR and TG-DTA. The results indicate ZnTi-PABA-LDH, synthesized by this method, exhibit relatively high crystallinity, and markedly enhanced thermal stability of PABA after intercalation into ZnTi-LDH. The UV-vis-NIR spectrophotometric and ESR data show excellent UV ray resistance and greatly decreased photocatalytic activity when PABA is intercalated into the interlayers of the ZnTi-LDH. The studies suggest that ZnTi-PABA-LDH may have potential applications as safe sunscreen materials.

Novel hybrids of Cu^(2+) ternary complexes of salicylidene-amino acid Schiff base with phenanthroline(or bipyridine) intercalated in Mg/Al-NO_3-layered double hydroxide

Four Cu2＋ complexes of salicylidene-amino acid Schiff base with 1,10-phenanthroline （Phen） or 2,2＇- bipyridine （Bipy） were successfully intercalated in interlayer galleries of Mg/AI-NO3-1ayered double hydroxide （LDH） by the swelling-restored method. The hybrids were characterized by elemental analysis, X-ray diffraction, FT-IR spectra, UV-vis DRS, TG-DTA and SEM observation. Good protection of the complexes by LDH in neutral and weak acidic solutions was revealed by UV spectra, cyclic voltammograms and luminescence spectra.

White phosphorescent organic light-emitting diodes using double emissive layer with three dopants for color stability

We fabricate white phosphorescent organic light-emitting diodes （PHOLEDs） with three dopants and double emissive layer （EML） to achieve color stability. The white PHOLEDs use FIrpic dopant for blue EML （B- EML）, and Ir（ppy）3：Ir（piq）3 dopants for green：red EML （GR-EML） with N,N＇-dicarbazolyl-3, 5-benzene （mCP） as host material. Thicknesses of B-EML and GR-EML are adjusted to form a narrow recombination zone at two EML＇s interface and charge trapping happens in EML according to wide highest occupied molecular orbital and/or lowest unoccupied molecular orbital energy band gap of mCP and smaller energy band gap of dopants. The total thickness of both EMLs is fixed at 30 nm in the device structure of ITO （150 nm）/MoO3 （2 nm）/N,N＇-diphenyl-N,N＇-bis（1-naphthyl-phenyl）-（1,1″-biphenyl）-4, 4＇-diamine （70 nm）/ meP：Firpic-8.0% （12 nm）/mCP：Ir（ppy）3-3.0%：Ir（piq）3-1.5% （18 nm）/2″,2＇,2＂＇-（1,3,5-benzinetriyl）-tris（1- phenyl-l-H-benzimidazole） （30 nm）/8-hydroxyquinolinolato-lithium （2 nm）/A1 （120 nm）. White PHOLED shows 18.25 cd/A of luminous efficiency and white color coordinates of （0.358 and 0.378） at 5000 cd/m2 and color stability with slight CIExy change of （0.028 and 0.002） as increasing luminance from 1000 to 5000 cd/m^2.