The aim of the study was to develop actarit double-layered osmotic pump tablets to overcome the weak points of actarit common tablets, such as short half-life and large plasma concentration fluctuations. Single factor...The aim of the study was to develop actarit double-layered osmotic pump tablets to overcome the weak points of actarit common tablets, such as short half-life and large plasma concentration fluctuations. Single factor experiment and orthogonal test were applied to optimize the formulation;the pharmacokinetic study was performed in beagle dogs adopting actarit common tablets as reference tablets. The optimal formulation was as follows: drug layer: 150 mg actarit, 240 mg PEO-N80, 50 mg NaCl;push layer: 140 mg PEO-WSR303, 20 mg NaCl;coating solution: 30 g cellulose acetate and 6 g PEG 4000 in 1000 ml 94% acetone solution, 60 mg coating weight gain. The pharmacokinetic study showed that T max was prolonged by the contrast of commercial common tablets with constant drug release rate, but the bioavailability was equivalent. And a good in vivo –in vitro correlation of the actarit osmotic pump tablets was also established. The designed actarit osmotic pump tablets can be applied for rheumatoid arthritis, proposing a promising replacement for the marked common products.展开更多
A procedure to evaluate the quality consistency of generic drugs based on the impurity profile and the similarity analysis methods was presented in this paper. Nifedipine extended-release tablets from six generic fact...A procedure to evaluate the quality consistency of generic drugs based on the impurity profile and the similarity analysis methods was presented in this paper. Nifedipine extended-release tablets from six generic factories of China were used to evaluate the uniformity with the original drug in the study. The procedure includes: choice of chromatographic methods, data collection and conformity test, evaluation of intra-batch similarity of drugs, evaluation of generic drugs with the original drug and weighted similarity evaluation of generic drugs. The data were collected via high-performance liquid chromatography (HPLC), and then calculated by correlation coefficient, cosine, principal component analysis (PCA) and hierarchical clustering analysis (HCA). It is more suitable to use peak areas as the vector when calculating the similarity of impurity profile. After weighting the peak areas of the unspecified impurities in further evaluation of the generic quality, the generic level of different factories was differentiated and the best generic factory was picked out.展开更多
A simple, precise and accurate method was developed and validated for the determination of allicin release from alliin/alliinase double-layer tablets. According to Appendix XC Ⅱ of Chinese Pharmacopoeia 2010 edition ...A simple, precise and accurate method was developed and validated for the determination of allicin release from alliin/alliinase double-layer tablets. According to Appendix XC Ⅱ of Chinese Pharmacopoeia 2010 edition Volume II, a small glass-method was adopted at the rotational speed of 100 r/min using 100 mL phosphate buffer （pH 6.8） as release medium. The release amount was determined by HPLC with a C18 column （250 mm × 4.6 mm, 5 μm） using the mobile phase consisting of methanol -0.4% carboxylic acid （65：35） at a flow rate of 1 mL/min and UV detection at 242 nm. The current method demonstrates good linearity over the range 4.052- 405.2 μg/mL （r2=0.9999） with an average recovery of 105.5%（RSD= 1.25%）. The accumulative release of alliin/alliinase double-layer tablets had good homogeneity for withinand betweenbatches. The method established is simple, accurate and repeatable for the determination of allicin release from alliin/alliinase double-layer tablets.展开更多
The purpose of this study was to develop an extended-release(ER) matrix tablet that shows robust dissolution properties able to account for the variability of pH and mechanical stress in the GI tract using a combinati...The purpose of this study was to develop an extended-release(ER) matrix tablet that shows robust dissolution properties able to account for the variability of pH and mechanical stress in the GI tract using a combination of enteric polymer and hydrophilic polymer. Hypromellose acetate succinate(HPMCAS) and hydroxypropylcellulose(HPC) were selected as ER polymers for the ER matrix tablet(HPMCAS/HPC ER matrix tablet). Oxycodone hydrochloride was employed as a model drug. Dissolution properties of the HPMCAS/HPC ER matrix tablets were evaluated and were not affected by the pH of the test medium or paddle rotating speed.In a USP apparatus 3(bio-relevant dissolution method), dissolution profiles of the HPMCAS/HPC ER matrix tablets containing oxycodone hydrochloride were similar to that of the reference product(OxyC ontin). Moreover, in vivo performance after oral administration of the HPMCAS/HPC ER matrix tablets to humans was simulated by GastroP lus based on dissolution profiles from the USP apparatus 3. The plasma concentration-time profile simulated was similar to that of the reference product. These results suggest that the combination of HPMCAS and HPC shows a robust dissolution profile against pH and paddle rotating speed and indicates the appropriate extended-release profile in humans.展开更多
The objective of this study is to evaluate the feasibility of obtaining extended release of tacrolimus by a novel combination of lipid-based solid dispersion and matrix-type extended release tablet techniques. Tacroli...The objective of this study is to evaluate the feasibility of obtaining extended release of tacrolimus by a novel combination of lipid-based solid dispersion and matrix-type extended release tablet techniques. Tacrolimus solid dispersion was prepared using glycerylbehenate(Compritol~?ATO888) and Pluronic F127 as the carrier materials with hot-melt method, which was then blended with hydrogel matrix materials, such as HPMC and lactose, the powders were directly compressed into tablets. In vitro drug release tests were carried out to evaluate the performance of the solid dispersions and the tablets. The dissolution rate of tacrolimus was significantly improved by the lipid-based solid dispersion, and the incorporation of HPC into the solid dispersion obviously improved its stability after storage. Extended release tablets loaded with tacrolimus solid dispersion showed prolonged drug release patterns over 24 h, the release patterns of the tablets can be tailored by the compositions of the matrix materials, including the types and content of HPMCs. A modified processing method that directly mixed the melted solid dispersion with HPMC powders improved the uniformity of the solid dispersion inside the tablet matrix and release profile. The release data of the extended release tablet fitted well to the Korsmeyer–Peppas model with n value of 0.85, which suggested diffusion-and erosion-controlled release mechanism. The combination of lipid-based solid dispersion and HPMC hydrogel matrix may find wide applications in the extended release dosage forms of high potent, water-insoluble drugs.展开更多
The objective of this study is to investigate the feasibility of using chitosanesodium alginate(CSeSA)based matrix tablets for extended-release of highly water-soluble drugs by changing formulation variables.Using tri...The objective of this study is to investigate the feasibility of using chitosanesodium alginate(CSeSA)based matrix tablets for extended-release of highly water-soluble drugs by changing formulation variables.Using trimetazidine hydrochloride(TH)as a water-soluble model drug,influence of dissolution medium,the amount of CSeSA,the CS:SA ratio,the type of SA,the type and amount of diluents,on in vitro drug release from CSeSA based matrix tablets were studied.Drug release kinetics and release mechanisms were elucidated.In vitro release experiments were conducted in simulated gastric fluid(SGF)followed by simulated intestinal fluid(SIF).Drug release rate decreased with the increase of CSeSA amount.CS:SA ratio had only slight effect on drug release and no influence of SA type on drug release was found.On the other hand,a large amount of water-soluble diluents could modify drug release profiles.It was found that drug release kinetics showed the best fit to Higuchi equation with Fickian diffusion as the main release mechanism.In conclusion,this study demonstrated that it is possible to design extended-release tablets of watersoluble drugs using CSeSA as the matrix by optimizing formulation components,and provide better understanding about drug release from CSeSA matrix tablets.展开更多
Aryloxypropanolamine is an essential structural scaffold for a variety of b-adrenergic receptor antagonists such as metoprolol.Molecules with such a structural motif tend to degrade into α,β ehydroxypropanolamine im...Aryloxypropanolamine is an essential structural scaffold for a variety of b-adrenergic receptor antagonists such as metoprolol.Molecules with such a structural motif tend to degrade into α,β ehydroxypropanolamine impurities via a radicaleinitiated oxidation pathway.These impurities are typically polar and nonchromophoric,and are thus often overlooked using traditional reversed phase chromatography and UV detection.In this work,stress testing of metoprolol confirmed the generation of 3-isopropylamino-1,2-propanediol as a degradation product,which is a specified impurity of metoprolol in the European Pharmacopoeia(impurity N).To ensure the safety and quality of metoprolol drug products,hydrophilic interaction chromatography(HILIC)methods using Halo Penta HILIC column(150mm×4.6 mm,5 μm)coupled with charged aerosol detection(CAD)were developed and optimized for the separation and quantitation of metoprolol impurity N in metoprolol drug products including metoprolol tartrate injection,metoprolol tartrate tablets,and metoprolol succinate extended-release tablets.These HILIC-CAD methods were validated per USP validation guidelines with respect to specificity,linearity,accuracy,and precision,and have been successfully applied to determine impurity N in metoprolol drug products.展开更多
文摘The aim of the study was to develop actarit double-layered osmotic pump tablets to overcome the weak points of actarit common tablets, such as short half-life and large plasma concentration fluctuations. Single factor experiment and orthogonal test were applied to optimize the formulation;the pharmacokinetic study was performed in beagle dogs adopting actarit common tablets as reference tablets. The optimal formulation was as follows: drug layer: 150 mg actarit, 240 mg PEO-N80, 50 mg NaCl;push layer: 140 mg PEO-WSR303, 20 mg NaCl;coating solution: 30 g cellulose acetate and 6 g PEG 4000 in 1000 ml 94% acetone solution, 60 mg coating weight gain. The pharmacokinetic study showed that T max was prolonged by the contrast of commercial common tablets with constant drug release rate, but the bioavailability was equivalent. And a good in vivo –in vitro correlation of the actarit osmotic pump tablets was also established. The designed actarit osmotic pump tablets can be applied for rheumatoid arthritis, proposing a promising replacement for the marked common products.
文摘A procedure to evaluate the quality consistency of generic drugs based on the impurity profile and the similarity analysis methods was presented in this paper. Nifedipine extended-release tablets from six generic factories of China were used to evaluate the uniformity with the original drug in the study. The procedure includes: choice of chromatographic methods, data collection and conformity test, evaluation of intra-batch similarity of drugs, evaluation of generic drugs with the original drug and weighted similarity evaluation of generic drugs. The data were collected via high-performance liquid chromatography (HPLC), and then calculated by correlation coefficient, cosine, principal component analysis (PCA) and hierarchical clustering analysis (HCA). It is more suitable to use peak areas as the vector when calculating the similarity of impurity profile. After weighting the peak areas of the unspecified impurities in further evaluation of the generic quality, the generic level of different factories was differentiated and the best generic factory was picked out.
文摘A simple, precise and accurate method was developed and validated for the determination of allicin release from alliin/alliinase double-layer tablets. According to Appendix XC Ⅱ of Chinese Pharmacopoeia 2010 edition Volume II, a small glass-method was adopted at the rotational speed of 100 r/min using 100 mL phosphate buffer （pH 6.8） as release medium. The release amount was determined by HPLC with a C18 column （250 mm × 4.6 mm, 5 μm） using the mobile phase consisting of methanol -0.4% carboxylic acid （65：35） at a flow rate of 1 mL/min and UV detection at 242 nm. The current method demonstrates good linearity over the range 4.052- 405.2 μg/mL （r2=0.9999） with an average recovery of 105.5%（RSD= 1.25%）. The accumulative release of alliin/alliinase double-layer tablets had good homogeneity for withinand betweenbatches. The method established is simple, accurate and repeatable for the determination of allicin release from alliin/alliinase double-layer tablets.
文摘The purpose of this study was to develop an extended-release(ER) matrix tablet that shows robust dissolution properties able to account for the variability of pH and mechanical stress in the GI tract using a combination of enteric polymer and hydrophilic polymer. Hypromellose acetate succinate(HPMCAS) and hydroxypropylcellulose(HPC) were selected as ER polymers for the ER matrix tablet(HPMCAS/HPC ER matrix tablet). Oxycodone hydrochloride was employed as a model drug. Dissolution properties of the HPMCAS/HPC ER matrix tablets were evaluated and were not affected by the pH of the test medium or paddle rotating speed.In a USP apparatus 3(bio-relevant dissolution method), dissolution profiles of the HPMCAS/HPC ER matrix tablets containing oxycodone hydrochloride were similar to that of the reference product(OxyC ontin). Moreover, in vivo performance after oral administration of the HPMCAS/HPC ER matrix tablets to humans was simulated by GastroP lus based on dissolution profiles from the USP apparatus 3. The plasma concentration-time profile simulated was similar to that of the reference product. These results suggest that the combination of HPMCAS and HPC shows a robust dissolution profile against pH and paddle rotating speed and indicates the appropriate extended-release profile in humans.
文摘The objective of this study is to evaluate the feasibility of obtaining extended release of tacrolimus by a novel combination of lipid-based solid dispersion and matrix-type extended release tablet techniques. Tacrolimus solid dispersion was prepared using glycerylbehenate(Compritol~?ATO888) and Pluronic F127 as the carrier materials with hot-melt method, which was then blended with hydrogel matrix materials, such as HPMC and lactose, the powders were directly compressed into tablets. In vitro drug release tests were carried out to evaluate the performance of the solid dispersions and the tablets. The dissolution rate of tacrolimus was significantly improved by the lipid-based solid dispersion, and the incorporation of HPC into the solid dispersion obviously improved its stability after storage. Extended release tablets loaded with tacrolimus solid dispersion showed prolonged drug release patterns over 24 h, the release patterns of the tablets can be tailored by the compositions of the matrix materials, including the types and content of HPMCs. A modified processing method that directly mixed the melted solid dispersion with HPMC powders improved the uniformity of the solid dispersion inside the tablet matrix and release profile. The release data of the extended release tablet fitted well to the Korsmeyer–Peppas model with n value of 0.85, which suggested diffusion-and erosion-controlled release mechanism. The combination of lipid-based solid dispersion and HPMC hydrogel matrix may find wide applications in the extended release dosage forms of high potent, water-insoluble drugs.
基金supported by Liaoning Institutions excellent talents support plan(No.LR2013047).
文摘The objective of this study is to investigate the feasibility of using chitosanesodium alginate(CSeSA)based matrix tablets for extended-release of highly water-soluble drugs by changing formulation variables.Using trimetazidine hydrochloride(TH)as a water-soluble model drug,influence of dissolution medium,the amount of CSeSA,the CS:SA ratio,the type of SA,the type and amount of diluents,on in vitro drug release from CSeSA based matrix tablets were studied.Drug release kinetics and release mechanisms were elucidated.In vitro release experiments were conducted in simulated gastric fluid(SGF)followed by simulated intestinal fluid(SIF).Drug release rate decreased with the increase of CSeSA amount.CS:SA ratio had only slight effect on drug release and no influence of SA type on drug release was found.On the other hand,a large amount of water-soluble diluents could modify drug release profiles.It was found that drug release kinetics showed the best fit to Higuchi equation with Fickian diffusion as the main release mechanism.In conclusion,this study demonstrated that it is possible to design extended-release tablets of watersoluble drugs using CSeSA as the matrix by optimizing formulation components,and provide better understanding about drug release from CSeSA matrix tablets.
文摘Aryloxypropanolamine is an essential structural scaffold for a variety of b-adrenergic receptor antagonists such as metoprolol.Molecules with such a structural motif tend to degrade into α,β ehydroxypropanolamine impurities via a radicaleinitiated oxidation pathway.These impurities are typically polar and nonchromophoric,and are thus often overlooked using traditional reversed phase chromatography and UV detection.In this work,stress testing of metoprolol confirmed the generation of 3-isopropylamino-1,2-propanediol as a degradation product,which is a specified impurity of metoprolol in the European Pharmacopoeia(impurity N).To ensure the safety and quality of metoprolol drug products,hydrophilic interaction chromatography(HILIC)methods using Halo Penta HILIC column(150mm×4.6 mm,5 μm)coupled with charged aerosol detection(CAD)were developed and optimized for the separation and quantitation of metoprolol impurity N in metoprolol drug products including metoprolol tartrate injection,metoprolol tartrate tablets,and metoprolol succinate extended-release tablets.These HILIC-CAD methods were validated per USP validation guidelines with respect to specificity,linearity,accuracy,and precision,and have been successfully applied to determine impurity N in metoprolol drug products.
