In March,2020,China NGO Network for International Exchanges(CNIE)launched the“Joint Action for Defeating COVID-19 Silk Road Community Building Initiative(Joint Action)”,to promote domestic NGOs to actively join in t...In March,2020,China NGO Network for International Exchanges(CNIE)launched the“Joint Action for Defeating COVID-19 Silk Road Community Building Initiative(Joint Action)”,to promote domestic NGOs to actively join in the international cooperation against the pandemic.展开更多
A new power supplies control system was developed at the high energy heavy ion microbeam facility in the Institute of Modern Physics(IMP),CAS.The system comprises AO modules from ICP DAS and AI modules from Advantech ...A new power supplies control system was developed at the high energy heavy ion microbeam facility in the Institute of Modern Physics(IMP),CAS.The system comprises AO modules from ICP DAS and AI modules from Advantech for different types of power supply interfaces.This paper introduces the hardware configuration,software design and running status of the power supplies system.展开更多
A new non-linear bending-torsional coupled model for double-row planetary gear set was proposed, and planet's eccentricity error, static transmission error, and time-varying meshing stiffness were taken into consi...A new non-linear bending-torsional coupled model for double-row planetary gear set was proposed, and planet's eccentricity error, static transmission error, and time-varying meshing stiffness were taken into consideration. The solution of differential governing equation of motion is determined by applying the Fourier series method. The behaviors of dynamic load sharing characteristics affected by the system parameters including gear eccentricities error, ring gear's supporting stiffness, planet's bearing stiffness, torsional stiffness of first stage carrier and input rotation rate were investigated qualitatively and systematically, and sun gear radial orbits at first and second stage were explored as well. Some theoretical results are summarized as guidelines for further research and design of double-row planetary gear train at last.展开更多
Maize is widely planted throughout the world and has the highest yield of all the cereal crops. The arid region of North- west China has become the largest base for seed-maize production, but water shortage is the bot...Maize is widely planted throughout the world and has the highest yield of all the cereal crops. The arid region of North- west China has become the largest base for seed-maize production, but water shortage is the bottleneck for its long-term sustainability. Investigating the transpiration of seed-maize plants will offer valuable information for suitable planting and irrigation strategies in this arid area. In this study, stem flow was measured using a heat balance method under alternate furrow irrigation and double-row ridge planting. Meteorological factors, soil water content （e）, soil temperature （Ts） and leaf area （LA） were also monitored during 2012 and 2013. The diurnal stem flow and seasonal dynamics of maize plants in the zones of south side female parent （SFP）, north side female parent （NFP） and male parent （MP） were investigated. The order of stem flow rate was： SFP〉MP〉NFP. The relationships between stem flow and influential factors during three growth stages at different time scales were analyzed. On an hourly scale, solar radiation （Rs） was the main driving factor of stem flow. The influence of air temperature （Ta） during the maturity stage was significantly higher than in other periods. On a daily scale, Rs was the main driving factor of stem flow during the heading stage. During the filling growth stage, the main driving factor of NFP and MP stem flow was RH and Ts, respectively. However, during the maturity stage, the environ- mental factors had no significant influence on seed-maize stem flow. For different seed-maize plants, the main influential factors were different in each of the three growing seasons. Therefore, we identified them to accurately model the FP and MP stem flow and applied precision irrigation under alternate partial root-zone furrow irrigation to analyze major factors affecting stem flow in different scales.展开更多
BACKGROUND In rotator cuff repair surgery,the double-row technique is widely performed.Studies have shown that with increased contact area and pressure between tendon and bone interface,better healing is promoted.AIM ...BACKGROUND In rotator cuff repair surgery,the double-row technique is widely performed.Studies have shown that with increased contact area and pressure between tendon and bone interface,better healing is promoted.AIM To assess the different suture configurations with the double-row technique and how this influences the contact area of the rotator cuff tendon to bone.METHODS This was a controlled laboratory study where identical tears were created in 24 fresh porcine shoulders over a 1.5 cm×2.5 cm infraspinatus insertion footprint.Double-row repair techniques,with 3 to 4-suture anchors in different configurations(2 medial,2 lateral vs 2 medial,1 lateral vs 1 medial,2 lateral),were employed for three control groups.Each group consisted of eight shoulders with identical repair configurations.Footprint contact areas of the repaired tendon against the tuberosity were determined using pressure sensitive Fujifilm placed between the tendon and tuberosity.RESULTS The mean contact area between tendon and insertion footprint from the imprinted Fujifilm was obtained using computer software.The contact area measured from a standard 4-suture anchor double row repair was 75.1±9.3 mm2,whereas areas obtained for the 2 lateral-1 medial and 2 medial-1 lateral anchor configurations were 72.9±5.2 mm2 and 75.0±4.9 mm2 respectively.No statistical significance was noted between the three groups.CONCLUSION In the technique of double-row repair,using a 3-suture anchor configuration may offer a non-inferior alternative to the standard 4-anchor construct in terms of efficacy.This may also result in overall cost reduction and shorter surgical time.展开更多
文摘In March,2020,China NGO Network for International Exchanges(CNIE)launched the“Joint Action for Defeating COVID-19 Silk Road Community Building Initiative(Joint Action)”,to promote domestic NGOs to actively join in the international cooperation against the pandemic.
文摘A new power supplies control system was developed at the high energy heavy ion microbeam facility in the Institute of Modern Physics(IMP),CAS.The system comprises AO modules from ICP DAS and AI modules from Advantech for different types of power supply interfaces.This paper introduces the hardware configuration,software design and running status of the power supplies system.
基金Projects(NZ2013303,NZ2014201)supported by the National Natural Science Foundation of ChinaProjects(51375226,51305196,51475226)supported by the Fundamental Research Funds for the Central Universities,China
文摘A new non-linear bending-torsional coupled model for double-row planetary gear set was proposed, and planet's eccentricity error, static transmission error, and time-varying meshing stiffness were taken into consideration. The solution of differential governing equation of motion is determined by applying the Fourier series method. The behaviors of dynamic load sharing characteristics affected by the system parameters including gear eccentricities error, ring gear's supporting stiffness, planet's bearing stiffness, torsional stiffness of first stage carrier and input rotation rate were investigated qualitatively and systematically, and sun gear radial orbits at first and second stage were explored as well. Some theoretical results are summarized as guidelines for further research and design of double-row planetary gear train at last.
基金grants from the National Natural Science Foundation of China (51222905, 51321001, 51439006)the National High-Tech R&D Program of China (863 Program, 2011AA100505)+1 种基金the Ministry of Water Resources of China (201201003)the Program for New Century Excellent Talents in University, Ministry of Education, China (NCET11-0479)
文摘Maize is widely planted throughout the world and has the highest yield of all the cereal crops. The arid region of North- west China has become the largest base for seed-maize production, but water shortage is the bottleneck for its long-term sustainability. Investigating the transpiration of seed-maize plants will offer valuable information for suitable planting and irrigation strategies in this arid area. In this study, stem flow was measured using a heat balance method under alternate furrow irrigation and double-row ridge planting. Meteorological factors, soil water content （e）, soil temperature （Ts） and leaf area （LA） were also monitored during 2012 and 2013. The diurnal stem flow and seasonal dynamics of maize plants in the zones of south side female parent （SFP）, north side female parent （NFP） and male parent （MP） were investigated. The order of stem flow rate was： SFP〉MP〉NFP. The relationships between stem flow and influential factors during three growth stages at different time scales were analyzed. On an hourly scale, solar radiation （Rs） was the main driving factor of stem flow. The influence of air temperature （Ta） during the maturity stage was significantly higher than in other periods. On a daily scale, Rs was the main driving factor of stem flow during the heading stage. During the filling growth stage, the main driving factor of NFP and MP stem flow was RH and Ts, respectively. However, during the maturity stage, the environ- mental factors had no significant influence on seed-maize stem flow. For different seed-maize plants, the main influential factors were different in each of the three growing seasons. Therefore, we identified them to accurately model the FP and MP stem flow and applied precision irrigation under alternate partial root-zone furrow irrigation to analyze major factors affecting stem flow in different scales.
文摘BACKGROUND In rotator cuff repair surgery,the double-row technique is widely performed.Studies have shown that with increased contact area and pressure between tendon and bone interface,better healing is promoted.AIM To assess the different suture configurations with the double-row technique and how this influences the contact area of the rotator cuff tendon to bone.METHODS This was a controlled laboratory study where identical tears were created in 24 fresh porcine shoulders over a 1.5 cm×2.5 cm infraspinatus insertion footprint.Double-row repair techniques,with 3 to 4-suture anchors in different configurations(2 medial,2 lateral vs 2 medial,1 lateral vs 1 medial,2 lateral),were employed for three control groups.Each group consisted of eight shoulders with identical repair configurations.Footprint contact areas of the repaired tendon against the tuberosity were determined using pressure sensitive Fujifilm placed between the tendon and tuberosity.RESULTS The mean contact area between tendon and insertion footprint from the imprinted Fujifilm was obtained using computer software.The contact area measured from a standard 4-suture anchor double row repair was 75.1±9.3 mm2,whereas areas obtained for the 2 lateral-1 medial and 2 medial-1 lateral anchor configurations were 72.9±5.2 mm2 and 75.0±4.9 mm2 respectively.No statistical significance was noted between the three groups.CONCLUSION In the technique of double-row repair,using a 3-suture anchor configuration may offer a non-inferior alternative to the standard 4-anchor construct in terms of efficacy.This may also result in overall cost reduction and shorter surgical time.
