In the last three decades,carbon dioxide(CO_(2)) emissions have shown a significant increase from various sources.To address this pressing issue,the importance of reducing CO_(2) emissions has grown,leading to increas...In the last three decades,carbon dioxide(CO_(2)) emissions have shown a significant increase from various sources.To address this pressing issue,the importance of reducing CO_(2) emissions has grown,leading to increased attention toward carbon capture,utilization,and storage strategies.Among these strategies,monodisperse microcapsules,produced by using droplet microfluidics,have emerged as promising tools for carbon capture,offering a potential solution to mitigate CO_(2) emissions.However,the limited yield of microcapsules due to the inherent low flow rate in droplet microfluidics remains a challenge.In this comprehensive review,the high-throughput production of carbon capture microcapsules using droplet microfluidics is focused on.Specifically,the detailed insights into microfluidic chip fabrication technologies,the microfluidic generation of emulsion droplets,along with the associated hydrodynamic considerations,and the generation of carbon capture microcapsules through droplet microfluidics are provided.This review highlights the substantial potential of droplet microfluidics as a promising technique for large-scale carbon capture microcapsule production,which could play a significant role in achieving carbon neutralization and emission reduction goals.展开更多
The poor thermal stability and high sensitivity severely hinder the practical application of hexanitrohexaazaisowurtzitane(CL-20).Herein,a kind of novel core@double-shell CL-20 based energetic composites were fabricat...The poor thermal stability and high sensitivity severely hinder the practical application of hexanitrohexaazaisowurtzitane(CL-20).Herein,a kind of novel core@double-shell CL-20 based energetic composites were fabricated to address the above issues.The coordination complexes which consist of natural polyphenol tannic acid(TA) and Fe~Ⅲ were chosen to construct the inner shell,while the graphene sheets were used to build the outer shell.The resulting CL-20/TA-Fe~Ⅲ/graphene composites exhibited simultaneously improved thermal stability and safety performance with only 1 wt% double-shell content,which should be ascribed to the intense physical encapsulation effect from inner shell combined with the desensitization effect of carbon nano-materials from outer shell.The phase transition(ε to γ) temperature increased from 173.70 ℃ of pure CL-20 to 191.87℃ of CL-20/TA-Fe~Ⅲ/graphene composites.Meanwhile,the characteristic drop height(H_(50)) dramatically increased from 14.7 cm of pure CL-20 to112.8 cm of CL-20/TA-Fe~Ⅲ/graphene composites,indicating much superior safety performance after the construction of the double-shell structure.In general,this work has provided an effective and versatile strategy to conquer the thermal stability and safety issues of CL-20 and contributes to the future application of high energy density energetic materials.展开更多
Silver nanoparticles(Ag NPs)are an effective antibacterial agent,but their application in food packaging is limited due to their easy agglomeration and oxidation.In this study,antibacterial microcapsules were fabricat...Silver nanoparticles(Ag NPs)are an effective antibacterial agent,but their application in food packaging is limited due to their easy agglomeration and oxidation.In this study,antibacterial microcapsules were fabricated using Ginkgo biloba essential oil(GBEO)as core material and chitosan and type B gelatin biopolymer as capsule mate-rials.These antibacterial microcapsules were then modified with green-synthesized Ag NPs,blended into the bio-polymer polylactic acid(PLA),and finally formed as films.Physicochemical properties and antibacterial activity against Escherichia coli(E.coli)and Staphylococcus aureus(S.aureus)were evaluated.Results showed that the prepared antibacterial PLA films exhibited excellent antibacterial activity against foodborne pathogens.Its TVC exceeded the limit value of 7 log CFU/g at 7 days compared with the 5 days of pure PLA films.Therefore,these films can extend the shelf life of grass carp fillets by 2–3 days under refrigeration.展开更多
In this study, lambda-cyhalothrin(LC) loaded polyurea microcapsules(MCs) with different particle sizes were fabricated.All of the MCs showed varying degrees of physical collapse, which was more obvious among those wit...In this study, lambda-cyhalothrin(LC) loaded polyurea microcapsules(MCs) with different particle sizes were fabricated.All of the MCs showed varying degrees of physical collapse, which was more obvious among those with smaller particle sizes. MCs with particle sizes of 1.38 μm(MC-S), 5.13 μm(MC-M) and 10.05 μm(MC-L) had shell thicknesses of 39.6,50.3 and 150.1 nm, respectively. MCs with smaller particles tended to have significantly faster release profiles, and the MC-S group had much higher bioactivity against Agrotis ipsilon and better foliar affinity on the peanut leaves(indicated by rainfastness) than MC-M and MC-L. All of the MCs exhibited light-enhanced release profiles and had much slower degradation compared with the emulsifiable concentrate(EC) group, among which MC-L had the slowest degradation.To generate MCs with both favorable quick efficacy and long-lasting efficacy, binary mixtures of MC-S, MC-M and MC-L were produced by mixing them in pairs at ratios of 2:1, 1:1 and 1:2. The mixture of MC-S:MC-L at 1:2 showed the best comprehensive efficacy in the peanut foliar spray scenario among the nine tested combinations, and its effective duration was three times longer than that of EC. Overall, the precise combination of MCs with different particle sizes can regulate the efficacy of pesticide control and serve as a strategy for the better utilization of pesticides.展开更多
Double-layered microcapsule corrosion inhibitors were developed by sodium monofluorophosphate as the core material,polymethyl methacrylate as the inner wall material,and polyvinyl alcohol as the outer wall material co...Double-layered microcapsule corrosion inhibitors were developed by sodium monofluorophosphate as the core material,polymethyl methacrylate as the inner wall material,and polyvinyl alcohol as the outer wall material combining the solvent evaporation method and spray drying method.The protection by the outer capsule wall was used to prolong the service life of the corrosion inhibitor.The dispersion,encapsulation,thermal stability of microcapsules,and the degradation rate of capsule wall in concrete pore solution were analyzed by ultra-deep field microscopy,scanning electron microscopy,thermal analyzer,and sodium ion release rate analysis.The microcapsules were incorporated into mortar samples containing steel reinforcement,and the effects of double-layered microcapsule corrosion inhibitors on the performance of the cement matrix and the actual corrosion-inhibiting effect were analyzed.The experimental results show that the double-layered microcapsules have a moderate particle size and uniform distribution,and the capsules were completely wrapped.The microcapsules as a whole have good thermal stability below 230 ℃.The monolayer membrane structure microcapsules completely broke within 1 day in the simulated concrete pore solution,and the double-layer membrane structure prolonged the service life of the microcapsules to 80 days in the simulated concrete pore solution before the core material was completely released.The mortar samples containing steel reinforcement incorporated with the double-layered microcapsule corrosion inhibitors still maintained a higher corrosion potential than the monolayer microcapsule corrosion inhibitors control group at 60 days.The incorporation of double-layered microcapsules into the cement matrix has no significant adverse effect on the setting time and early strength.展开更多
In this paper, the preparation technique of lavender essential oil microcapsules and the construction method of aromatic textiles were expounded, and the research status of bed curtains and lavender microcapsules at h...In this paper, the preparation technique of lavender essential oil microcapsules and the construction method of aromatic textiles were expounded, and the research status of bed curtains and lavender microcapsules at home and abroad was analyzed and studied from the perspective of application in textiles. The application of lavender essential oil to bed curtains through the microcapsule technique was put forward to allow lavender essential oil to play its role of helping sleep in bed curtains. This paper expounded the material selection and preparation technique of lavender microcapsule agents, and put forward the preparation method of microcapsules with mixed solutions of pure Chinese medicine extracts and natural essences as core material and high-viscosity epoxy resin as wall materials. The post-processing techniques and the spray ironing method for clothing were studied and developed, and these techniques and methods were applied to bed curtains, and good results were obtained.展开更多
Microcapsules with chlorpyrifos cores and polyurea walls were synthesized with 2,4-tolylene diisocyanate as an oil-soluble monomer and ethylenediamine as a water-soluble monomer via an interracial polycondensation rea...Microcapsules with chlorpyrifos cores and polyurea walls were synthesized with 2,4-tolylene diisocyanate as an oil-soluble monomer and ethylenediamine as a water-soluble monomer via an interracial polycondensation reaction. The products were characterized by means of Fourier transform infrared spectrometry, ^13C NMR spectrometry and ^31p NMR spectrometry. The morphology, the particle size and the particle size distribution, and the thermal properties were also evaluated. The prepared microcapsules exhibit clear and smooth surfaces and have a mean diameter of 28. 13 μm. These microcapsules also have a good thermal stability for long-term use, and have potential applications in minimizing the toxicity of chlorpyrifos through controlled release.展开更多
Microcapsule technology is a kind of technology wrapping the solid or liquid into minute-sized particles within the field of micrometer or millimeter with film forming materials. This thesis introduces microcapsule te...Microcapsule technology is a kind of technology wrapping the solid or liquid into minute-sized particles within the field of micrometer or millimeter with film forming materials. This thesis introduces microcapsule technology of phase change materials and its main functions and the structural composition, preparation methods and characterization technology of microcapsule of phase change materials. The microcapsule of phase change materials is small in size and its temperature remains unchanged during the process of heat absorption and heat release. It is of great value in research and application prospect due to these characteristics.展开更多
A general and versatile strategy to prepare melamine-formaldehyde(MF)microcapsules encapsulating oil-based fragrances by combining solvent evaporation and in situ polymerization was proposed in this work.The oil-based...A general and versatile strategy to prepare melamine-formaldehyde(MF)microcapsules encapsulating oil-based fragrances by combining solvent evaporation and in situ polymerization was proposed in this work.The oil-based fragrance was pre-encapsulated by an inner polyacrylate membrane via solvent evaporation,followed by in situ polymerization of MF precondensates as an outer shell.The polyacrylate membrane is used as an intermediate bridging layer to stabilize the oil-based fragrance,and to provide driving forces for in situ polymerization of MF precondensates through electrostatic attractions between carboxyl groups and ammonium ions.It was demonstrated that MF microcapsules containing clove oil were prepared successfully.The amount and the composition of the intermediate polyacrylate bridging layer were critical.Smooth and sphere-shaped MF-clove oil microcapsules were prepared when the weight ratio of polyacrylate to clove oil was over 60 wt%and the concentration of acrylic acid(AA)increased to 10 wt%in polyacrylate.In addition,MF microcapsules containing sunflower oil and hexyl salicylate were prepared by using this method.The work suggests that this new approach can be potentially used to encapsulate various core materials,tuning the shell properties of microcapsules such as thickness,mechanical strength and release properties.展开更多
Immobilization biocatalysis is a potential technology to improve the activity and stability of biocatalysts in nonaqueous systems for efficient industrial production.Alginate-chitosan(AC)microcapsules were prepared as...Immobilization biocatalysis is a potential technology to improve the activity and stability of biocatalysts in nonaqueous systems for efficient industrial production.Alginate-chitosan(AC)microcapsules were prepared as immobilization carriers by emulsifi cation-internal gelation and complexation reaction,and their contribution on facilitating the growth and metabolism of yeast cells were testifi ed successfully in culture medium-solvent biphasic systems.The cell growth in AC microcapsules is superior to that in alginate beads,and the cells in both immobilization carriers maintain much higher activity than free cells,which demonstrates AC microcapsules can confer yeast cells the ability to resist the adverse effect of solvent.Moreover,the performance of AC microcapsules in biphasic systems could be improved by adjusting the formation of outer polyelectrolyte complex(PEC)membrane to promote the cell growth and metabolic ability under the balance of resisting solvent toxicity and permitting substrate diffusion.Therefore,these findings are quite valuable for applying AC microcapsules as novel immobilization carriers to realize the biotransformation of value-added products in aqueous-solvent biphasic systems.展开更多
The urea-formaldehyde(UF) capsules filled with a healing agent, a mixture of epoxy resins(epoxy 711 and E-51) as core material, were produced by means of one step in-situ polymerization. The characteristics of the...The urea-formaldehyde(UF) capsules filled with a healing agent, a mixture of epoxy resins(epoxy 711 and E-51) as core material, were produced by means of one step in-situ polymerization. The characteristics of these microcapsules were studied via scanning electron microscopy(SEM), particle size analysis, FTIR and DSC/TGA. The results show that the dispersed and integrated microcapsules of 5 μm in shell thickness were synthesized successfully. The capsules were produced with diameters ranging from 10 to 250 μm via controlling agitation rate. Young's modulus of the capsule was a little lower than those of the epoxy resins, but the microcapsules having such a shell thickness were robust enough to survive handling during manufacturing self-healing composites. When damage occurred in the epoxy matrix, the crack could rupture the microcapsule to make the repairing agent release.展开更多
To study the influences of phase change material(PCM)microcapsules in clothing on human thermal responses,a mathematical model is developed.The improved Stolwijk’s model is used to simulate human thermo-regulatory pr...To study the influences of phase change material(PCM)microcapsules in clothing on human thermal responses,a mathematical model is developed.The improved Stolwijk’s model is used to simulate human thermo-regulatory process,and the coupled heat and moisture transfer including the moisture sorption/desorption of fibers and effects of phase transition temperature range on the phase change processes of the PCM is considered in clothing model.Meanwhile,the theoretical predictions are validated by experimental data.Then,the interactions between human body thermal responses and the heat and moisture transfer in clothing are discussed by comparing the prediction results with PCMs and without PCMs.Also the effects of fiber hygroscopicity on clothing and human thermal responses are compared.The conclusion shows that the clothing with PCMs microcapsules can delay the human temperature variations and decrease the sweat accumulation rate on the skin surface and heat loss during changing of ambient conditions,and fiber hygroscopicity reduces the effect of PCM microcapsules on delaying garment temperature variations very significantly.展开更多
An equation of diffusion for microcapsules(hollow sphere)was developed,employing the mathematicalmodel for the diffusion characteristics of solid sphere.In the proposed equation,a combination diffusion coeffi-cient ...An equation of diffusion for microcapsules(hollow sphere)was developed,employing the mathematicalmodel for the diffusion characteristics of solid sphere.In the proposed equation,a combination diffusion coeffi-cient was introduced as a substitute for the diffusion coefficient in the solid sphere mathematical model and ex-pressed as a function of the diffusion coefficient inside solution of hollow sphere,as well as in the polymer mem-brane.With this modified model,the diffusion coefficients of glucose in NaCS(sodium cellulose sulfate)-PDADMAC(Poly-diallyl-dimethyl-ammonium chloride)membrane and in Ca-alginate gel membrane were deter-mined.The diffusion coefficient in NaCS-PDADMAC membrane was found to be 2.12×10<sup>-11</sup>m<sup>2</sup>·s<sup>-1</sup>and thatin Ca-alginate membrane 2.62×10<sup>-10</sup>m<sup>2</sup>·s<sup>-1</sup>.展开更多
Urease-loaded colloidosome microcapsules with SiO2 nanoparticle shells and gellan gel cores were prepared facilely and highly efficiently by self-assembly of colloidal particles at the liquid-liquid interfaces and sub...Urease-loaded colloidosome microcapsules with SiO2 nanoparticle shells and gellan gel cores were prepared facilely and highly efficiently by self-assembly of colloidal particles at the liquid-liquid interfaces and subsequently in-situ gelation of gellan gum. The urease-loaded colloidosome microcapsules were used as an enzymatic reactor to produce calcium carbonate precipitates by urease-catalyzed urea hydrolysis in the presence of calcium cations. The CaCO3/SiO2 shells were formed finally around the gellan gel cores. The colloidosome microcapsules used as a biomimetic reactor has been demonstrated for the first time.展开更多
We prepared spherical microcapsules modified by carboxymethyl cellulose(CMC) with urea-formaldehyde(UF) resin as a shell material with a two-step process by in situ polymerization, and characterized the microcosmi...We prepared spherical microcapsules modified by carboxymethyl cellulose(CMC) with urea-formaldehyde(UF) resin as a shell material with a two-step process by in situ polymerization, and characterized the microcosmic features, chemical structure, and thermal performance of the microcapsules by SEM, FTIR, DSC, and TGA. We studied the effects of different experimental parameters of curing p H, the amounts of the emulsifier and emulsion speed. The CMC-UF microcapsules had good heat resistance and stability. The enthalpy of CMC-UF microcapsules reached 50.33 J g-1. Therefore, CMC-UF resin can be used as a potential wall material of phase change materials.展开更多
Objective:To formulate and evaluate Albendazole microcapsules using chitosan,a natural polymer for colon-specific delivery for better treatment of helminthiasis,filariasis,colorectal cancer,avoiding the side effects.M...Objective:To formulate and evaluate Albendazole microcapsules using chitosan,a natural polymer for colon-specific delivery for better treatment of helminthiasis,filariasis,colorectal cancer,avoiding the side effects.Methods:The Albendazole microcapsules were prepared by the use of different concentrations of sodium alginate,chitosan and hydroxypropyl methylcellulose(HPMC).The polysaccharides chitosan reacted with sodium alginate in the presence of calcium chloride to form microcapsules with a polyelectrolyte complex membrane by electrostatic interactions between the two oppositely charged polymers.The microcapsules were then studied for entrapment efficiency,drug-polymer compatibility and surface morphology. In vitro drug release study in presence and absence of cecal content were also studied.Further, kinetic modellings were employed to find out release mechanisms.Results:Albendazole loaded microspheres showd high entrapment efficiency(72.8%) and the microcapsules were free flowing,non aggregated and spherical,between 600 and 1 000μm in diameter.The surface of microcapsules were found to be porous and wavy.The FT-IR spectrum showed that there is no interaction between the polymer and the drug.The in vitro drug release study found to be affected by change in chitosan,sodium alginate and HPMC concentration.The microcapsules with 2.5% sodium alginate and 0.4% chitosan shown minimum release in gastrointestinal simulated condition but shows maximum drug release at the end of 24th hour in presence of cecal content.The rate of drug release follows Korsmeyer-peppas model that was the drug release is by diffusion and erosion.Conclusions:The study reveals that Albendazole loaded chitosanalginate based microsphere can be used effectively for the colon targeting.展开更多
The ternary transitional metal oxide NiCo_2O_4 is a promising anode material for sodium ion batteries due to its high theoretical capacity and superior electrical conductivity. However, its sodium storage capability i...The ternary transitional metal oxide NiCo_2O_4 is a promising anode material for sodium ion batteries due to its high theoretical capacity and superior electrical conductivity. However, its sodium storage capability is severely limited by the sluggish sodiation/desodiation reaction kinetics. Herein, NiCo_2O_4 double-shelled hollow spheres were synthesized via a microwave-assisted, fast solvothermal synthetic procedure in a mixture of isopropanol and glycerol, followed by annealing. Isopropanol played a vital role in the precipitation of nickel and cobalt,and the shrinkage of the glycerol quasi-emulsion under heat treatment was responsible for the formation of the double-shelled nanostructure. The as-synthesized productwas tested as an anode material in a sodium ion battery,was found to exhibit a high reversible specific capacity of 511 m Ahg^(-1) at 100 m Ag^(-1), and deliver high capacity retention after 100 cycles.展开更多
Bone defects caused by trauma,tumor,or osteoarthritis remain challenging due to the lack of effective treatments in clinic.Stem cell transplantation has emerged as an alternative approach for bone repair and attracted...Bone defects caused by trauma,tumor,or osteoarthritis remain challenging due to the lack of effective treatments in clinic.Stem cell transplantation has emerged as an alternative approach for bone repair and attracted widespread attention owing to its excellent biological activities and therapy effect.The attempts to develop this therapeutic approach focus on the generation of effective cell delivery vehicles,since the shortcomings of direct injection of stem cells into target tissues.Here,we developed a novel core-shell microcapsule with a stem cell-laden core and a biomass shell by using all-aqueous phase microfluidic electrospray technology.The designed core-shell microcapsules showed a high cell viability during the culture procedure.In addition,the animal experiments exhibited that stem cell-laden core-shell microcapsules have good biocompatibility and therapeutic effect for bone defects.This study indicated that the core-shell biomass microcapsules generated by microfluidic electrospray have promising potential in tissue engineering and regenerative medicine.展开更多
The self-healing microcapsules can be buried in the coating to improve the anticorrosive ability.In this paper,self-healing microcapsules of polyurea(PU)/melamine resin(MF)double shell were prepared by in-situ polymer...The self-healing microcapsules can be buried in the coating to improve the anticorrosive ability.In this paper,self-healing microcapsules of polyurea(PU)/melamine resin(MF)double shell were prepared by in-situ polymerization and interfacial polymerization with isocyanate as the core material.Scanning electron microscope was used to observe the microcapsule morphology.The structures of microcapsules prepared with different chain extenders were characterized by Fourier transform infrared spectroscopy.The micromanipulation system was used to loading–holding,loading–unloading and loading to rupture individual microcapsules,so as to explore the mechanical properties of microcapsules.The Young’s modulus corresponding to microcapsules was calculated by mathematical model fitting.The self-healing properties of microcapsule coating were characterized by optical microscope.The experimental results showed that the microcapsule shell prepared under optimized conditions had a complete morphology and good mechanical properties.The microcapsule was in the elastic deformation stage under small deformation,and the plastic deformation stage under large deformation.The Young’s modulus range of microcapsules was 9.29–14.51 MPa,and the corresponding Young’s modulus could be prepared by adjusting the process.The surface crack of the coating containing microcapsule could heal itself after48 h in a humid environment.展开更多
In order to improve the performance of non-asbestos composite auto brake pads that are composed of matrix resin, reinforced material and fillers, a novel method with new technology of self-heal microcapsules was propo...In order to improve the performance of non-asbestos composite auto brake pads that are composed of matrix resin, reinforced material and fillers, a novel method with new technology of self-heal microcapsules was proposed. Nano reinforced fillers' effects were also considered in the experiment project. Five recipe designs for new composite auto brake pads were carried out and cor-responding samples were prepared as well. The friction coefficient and wearing properties at certain temperature, impact intensity and hardness were comparatively studied. Investigations indicate that properties of such composite auto brake pads meet the requirements of the national standards while microcapsule's weight content varies from 5.5wt%-1.09wt% of matrix resin and microcapsule's loca-tion varies in the pads. Nano reinforced fillers have the effects of increasing composites' impact in-tensity and hardness. Application of self-healing microcapsules in auto brake pads is feasible.展开更多
基金supported by the National Natural Science Foundation of China (No.52036006)。
文摘In the last three decades,carbon dioxide(CO_(2)) emissions have shown a significant increase from various sources.To address this pressing issue,the importance of reducing CO_(2) emissions has grown,leading to increased attention toward carbon capture,utilization,and storage strategies.Among these strategies,monodisperse microcapsules,produced by using droplet microfluidics,have emerged as promising tools for carbon capture,offering a potential solution to mitigate CO_(2) emissions.However,the limited yield of microcapsules due to the inherent low flow rate in droplet microfluidics remains a challenge.In this comprehensive review,the high-throughput production of carbon capture microcapsules using droplet microfluidics is focused on.Specifically,the detailed insights into microfluidic chip fabrication technologies,the microfluidic generation of emulsion droplets,along with the associated hydrodynamic considerations,and the generation of carbon capture microcapsules through droplet microfluidics are provided.This review highlights the substantial potential of droplet microfluidics as a promising technique for large-scale carbon capture microcapsule production,which could play a significant role in achieving carbon neutralization and emission reduction goals.
基金financially supported by the National Natural Science Foundation of China (Grant No. 22275173)the Open Project of State Key Laboratory of Environment-friendly Energy Materials (Grant No. 22kfhg10)。
文摘The poor thermal stability and high sensitivity severely hinder the practical application of hexanitrohexaazaisowurtzitane(CL-20).Herein,a kind of novel core@double-shell CL-20 based energetic composites were fabricated to address the above issues.The coordination complexes which consist of natural polyphenol tannic acid(TA) and Fe~Ⅲ were chosen to construct the inner shell,while the graphene sheets were used to build the outer shell.The resulting CL-20/TA-Fe~Ⅲ/graphene composites exhibited simultaneously improved thermal stability and safety performance with only 1 wt% double-shell content,which should be ascribed to the intense physical encapsulation effect from inner shell combined with the desensitization effect of carbon nano-materials from outer shell.The phase transition(ε to γ) temperature increased from 173.70 ℃ of pure CL-20 to 191.87℃ of CL-20/TA-Fe~Ⅲ/graphene composites.Meanwhile,the characteristic drop height(H_(50)) dramatically increased from 14.7 cm of pure CL-20 to112.8 cm of CL-20/TA-Fe~Ⅲ/graphene composites,indicating much superior safety performance after the construction of the double-shell structure.In general,this work has provided an effective and versatile strategy to conquer the thermal stability and safety issues of CL-20 and contributes to the future application of high energy density energetic materials.
基金supported by the National Key R&D Program of China(Grant No.2020YFD0900905).
文摘Silver nanoparticles(Ag NPs)are an effective antibacterial agent,but their application in food packaging is limited due to their easy agglomeration and oxidation.In this study,antibacterial microcapsules were fabricated using Ginkgo biloba essential oil(GBEO)as core material and chitosan and type B gelatin biopolymer as capsule mate-rials.These antibacterial microcapsules were then modified with green-synthesized Ag NPs,blended into the bio-polymer polylactic acid(PLA),and finally formed as films.Physicochemical properties and antibacterial activity against Escherichia coli(E.coli)and Staphylococcus aureus(S.aureus)were evaluated.Results showed that the prepared antibacterial PLA films exhibited excellent antibacterial activity against foodborne pathogens.Its TVC exceeded the limit value of 7 log CFU/g at 7 days compared with the 5 days of pure PLA films.Therefore,these films can extend the shelf life of grass carp fillets by 2–3 days under refrigeration.
基金funded by grants from the Modern Agricultural Industry Technology System for Vegetables in Shandong Province, China (SDAIT-05)the National Natural Science Foundation of China (32001953)。
文摘In this study, lambda-cyhalothrin(LC) loaded polyurea microcapsules(MCs) with different particle sizes were fabricated.All of the MCs showed varying degrees of physical collapse, which was more obvious among those with smaller particle sizes. MCs with particle sizes of 1.38 μm(MC-S), 5.13 μm(MC-M) and 10.05 μm(MC-L) had shell thicknesses of 39.6,50.3 and 150.1 nm, respectively. MCs with smaller particles tended to have significantly faster release profiles, and the MC-S group had much higher bioactivity against Agrotis ipsilon and better foliar affinity on the peanut leaves(indicated by rainfastness) than MC-M and MC-L. All of the MCs exhibited light-enhanced release profiles and had much slower degradation compared with the emulsifiable concentrate(EC) group, among which MC-L had the slowest degradation.To generate MCs with both favorable quick efficacy and long-lasting efficacy, binary mixtures of MC-S, MC-M and MC-L were produced by mixing them in pairs at ratios of 2:1, 1:1 and 1:2. The mixture of MC-S:MC-L at 1:2 showed the best comprehensive efficacy in the peanut foliar spray scenario among the nine tested combinations, and its effective duration was three times longer than that of EC. Overall, the precise combination of MCs with different particle sizes can regulate the efficacy of pesticide control and serve as a strategy for the better utilization of pesticides.
基金Fund by the National Key Technology Research and Development Program of the Ministry of Science and Technology of China (No.2018YFD1101002-03)。
文摘Double-layered microcapsule corrosion inhibitors were developed by sodium monofluorophosphate as the core material,polymethyl methacrylate as the inner wall material,and polyvinyl alcohol as the outer wall material combining the solvent evaporation method and spray drying method.The protection by the outer capsule wall was used to prolong the service life of the corrosion inhibitor.The dispersion,encapsulation,thermal stability of microcapsules,and the degradation rate of capsule wall in concrete pore solution were analyzed by ultra-deep field microscopy,scanning electron microscopy,thermal analyzer,and sodium ion release rate analysis.The microcapsules were incorporated into mortar samples containing steel reinforcement,and the effects of double-layered microcapsule corrosion inhibitors on the performance of the cement matrix and the actual corrosion-inhibiting effect were analyzed.The experimental results show that the double-layered microcapsules have a moderate particle size and uniform distribution,and the capsules were completely wrapped.The microcapsules as a whole have good thermal stability below 230 ℃.The monolayer membrane structure microcapsules completely broke within 1 day in the simulated concrete pore solution,and the double-layer membrane structure prolonged the service life of the microcapsules to 80 days in the simulated concrete pore solution before the core material was completely released.The mortar samples containing steel reinforcement incorporated with the double-layered microcapsule corrosion inhibitors still maintained a higher corrosion potential than the monolayer microcapsule corrosion inhibitors control group at 60 days.The incorporation of double-layered microcapsules into the cement matrix has no significant adverse effect on the setting time and early strength.
基金Supported by Undergraduate Training Program for Innovation and Entrepreneurship of Guangxi University of Chinese Medicine in 2023(S202310600084)。
文摘In this paper, the preparation technique of lavender essential oil microcapsules and the construction method of aromatic textiles were expounded, and the research status of bed curtains and lavender microcapsules at home and abroad was analyzed and studied from the perspective of application in textiles. The application of lavender essential oil to bed curtains through the microcapsule technique was put forward to allow lavender essential oil to play its role of helping sleep in bed curtains. This paper expounded the material selection and preparation technique of lavender microcapsule agents, and put forward the preparation method of microcapsules with mixed solutions of pure Chinese medicine extracts and natural essences as core material and high-viscosity epoxy resin as wall materials. The post-processing techniques and the spray ironing method for clothing were studied and developed, and these techniques and methods were applied to bed curtains, and good results were obtained.
文摘Microcapsules with chlorpyrifos cores and polyurea walls were synthesized with 2,4-tolylene diisocyanate as an oil-soluble monomer and ethylenediamine as a water-soluble monomer via an interracial polycondensation reaction. The products were characterized by means of Fourier transform infrared spectrometry, ^13C NMR spectrometry and ^31p NMR spectrometry. The morphology, the particle size and the particle size distribution, and the thermal properties were also evaluated. The prepared microcapsules exhibit clear and smooth surfaces and have a mean diameter of 28. 13 μm. These microcapsules also have a good thermal stability for long-term use, and have potential applications in minimizing the toxicity of chlorpyrifos through controlled release.
文摘Microcapsule technology is a kind of technology wrapping the solid or liquid into minute-sized particles within the field of micrometer or millimeter with film forming materials. This thesis introduces microcapsule technology of phase change materials and its main functions and the structural composition, preparation methods and characterization technology of microcapsule of phase change materials. The microcapsule of phase change materials is small in size and its temperature remains unchanged during the process of heat absorption and heat release. It is of great value in research and application prospect due to these characteristics.
基金Supported by the National Natural Science Foundation of China(21466016,21577053)the Natural Science Foundation of Yunnan Province(2016FB024).
文摘A general and versatile strategy to prepare melamine-formaldehyde(MF)microcapsules encapsulating oil-based fragrances by combining solvent evaporation and in situ polymerization was proposed in this work.The oil-based fragrance was pre-encapsulated by an inner polyacrylate membrane via solvent evaporation,followed by in situ polymerization of MF precondensates as an outer shell.The polyacrylate membrane is used as an intermediate bridging layer to stabilize the oil-based fragrance,and to provide driving forces for in situ polymerization of MF precondensates through electrostatic attractions between carboxyl groups and ammonium ions.It was demonstrated that MF microcapsules containing clove oil were prepared successfully.The amount and the composition of the intermediate polyacrylate bridging layer were critical.Smooth and sphere-shaped MF-clove oil microcapsules were prepared when the weight ratio of polyacrylate to clove oil was over 60 wt%and the concentration of acrylic acid(AA)increased to 10 wt%in polyacrylate.In addition,MF microcapsules containing sunflower oil and hexyl salicylate were prepared by using this method.The work suggests that this new approach can be potentially used to encapsulate various core materials,tuning the shell properties of microcapsules such as thickness,mechanical strength and release properties.
基金Supported by the National Natural Science Foundation of China(No.21276033)the Open Foundation of the State Key Laboratory of Bioactive Seaweed Substances(Nos.SKL-BASS1707,SKL-BASS1711)the Liaoning Provincial BaiQianWan Talents Program(No.2017-6)
文摘Immobilization biocatalysis is a potential technology to improve the activity and stability of biocatalysts in nonaqueous systems for efficient industrial production.Alginate-chitosan(AC)microcapsules were prepared as immobilization carriers by emulsifi cation-internal gelation and complexation reaction,and their contribution on facilitating the growth and metabolism of yeast cells were testifi ed successfully in culture medium-solvent biphasic systems.The cell growth in AC microcapsules is superior to that in alginate beads,and the cells in both immobilization carriers maintain much higher activity than free cells,which demonstrates AC microcapsules can confer yeast cells the ability to resist the adverse effect of solvent.Moreover,the performance of AC microcapsules in biphasic systems could be improved by adjusting the formation of outer polyelectrolyte complex(PEC)membrane to promote the cell growth and metabolic ability under the balance of resisting solvent toxicity and permitting substrate diffusion.Therefore,these findings are quite valuable for applying AC microcapsules as novel immobilization carriers to realize the biotransformation of value-added products in aqueous-solvent biphasic systems.
基金Supported by the National Natural Science Foundation of China(Nos.50775222 and 50735006)
文摘The urea-formaldehyde(UF) capsules filled with a healing agent, a mixture of epoxy resins(epoxy 711 and E-51) as core material, were produced by means of one step in-situ polymerization. The characteristics of these microcapsules were studied via scanning electron microscopy(SEM), particle size analysis, FTIR and DSC/TGA. The results show that the dispersed and integrated microcapsules of 5 μm in shell thickness were synthesized successfully. The capsules were produced with diameters ranging from 10 to 250 μm via controlling agitation rate. Young's modulus of the capsule was a little lower than those of the epoxy resins, but the microcapsules having such a shell thickness were robust enough to survive handling during manufacturing self-healing composites. When damage occurred in the epoxy matrix, the crack could rupture the microcapsule to make the repairing agent release.
基金supported by the National Natural Science Foundation of China (No. 50706017)the Research Funds of Nanjing University of Aeronautics and Astronautics (No.NS2010009)
文摘To study the influences of phase change material(PCM)microcapsules in clothing on human thermal responses,a mathematical model is developed.The improved Stolwijk’s model is used to simulate human thermo-regulatory process,and the coupled heat and moisture transfer including the moisture sorption/desorption of fibers and effects of phase transition temperature range on the phase change processes of the PCM is considered in clothing model.Meanwhile,the theoretical predictions are validated by experimental data.Then,the interactions between human body thermal responses and the heat and moisture transfer in clothing are discussed by comparing the prediction results with PCMs and without PCMs.Also the effects of fiber hygroscopicity on clothing and human thermal responses are compared.The conclusion shows that the clothing with PCMs microcapsules can delay the human temperature variations and decrease the sweat accumulation rate on the skin surface and heat loss during changing of ambient conditions,and fiber hygroscopicity reduces the effect of PCM microcapsules on delaying garment temperature variations very significantly.
基金Supported by the National Natural Science Foundation of China(No.29676069),the Foundation of the National Education committee of China and Mr.Chao Guangbiao advanced Technology Foundation of Zhejiang University.
文摘An equation of diffusion for microcapsules(hollow sphere)was developed,employing the mathematicalmodel for the diffusion characteristics of solid sphere.In the proposed equation,a combination diffusion coeffi-cient was introduced as a substitute for the diffusion coefficient in the solid sphere mathematical model and ex-pressed as a function of the diffusion coefficient inside solution of hollow sphere,as well as in the polymer mem-brane.With this modified model,the diffusion coefficients of glucose in NaCS(sodium cellulose sulfate)-PDADMAC(Poly-diallyl-dimethyl-ammonium chloride)membrane and in Ca-alginate gel membrane were deter-mined.The diffusion coefficient in NaCS-PDADMAC membrane was found to be 2.12×10<sup>-11</sup>m<sup>2</sup>·s<sup>-1</sup>and thatin Ca-alginate membrane 2.62×10<sup>-10</sup>m<sup>2</sup>·s<sup>-1</sup>.
基金Supported by the National Natural Science Foundation of China(Nos.20874030 and 50973034)the Chinese Universities Scientific Fund(No.2009ZZ0036)the Planned Science and Technology Project of Guangdong Province, China(No.2010B010800017)
文摘Urease-loaded colloidosome microcapsules with SiO2 nanoparticle shells and gellan gel cores were prepared facilely and highly efficiently by self-assembly of colloidal particles at the liquid-liquid interfaces and subsequently in-situ gelation of gellan gum. The urease-loaded colloidosome microcapsules were used as an enzymatic reactor to produce calcium carbonate precipitates by urease-catalyzed urea hydrolysis in the presence of calcium cations. The CaCO3/SiO2 shells were formed finally around the gellan gel cores. The colloidosome microcapsules used as a biomimetic reactor has been demonstrated for the first time.
基金financially supported by the Central University Basic Scientific Research Project of China(No.2572014DB01)
文摘We prepared spherical microcapsules modified by carboxymethyl cellulose(CMC) with urea-formaldehyde(UF) resin as a shell material with a two-step process by in situ polymerization, and characterized the microcosmic features, chemical structure, and thermal performance of the microcapsules by SEM, FTIR, DSC, and TGA. We studied the effects of different experimental parameters of curing p H, the amounts of the emulsifier and emulsion speed. The CMC-UF microcapsules had good heat resistance and stability. The enthalpy of CMC-UF microcapsules reached 50.33 J g-1. Therefore, CMC-UF resin can be used as a potential wall material of phase change materials.
文摘Objective:To formulate and evaluate Albendazole microcapsules using chitosan,a natural polymer for colon-specific delivery for better treatment of helminthiasis,filariasis,colorectal cancer,avoiding the side effects.Methods:The Albendazole microcapsules were prepared by the use of different concentrations of sodium alginate,chitosan and hydroxypropyl methylcellulose(HPMC).The polysaccharides chitosan reacted with sodium alginate in the presence of calcium chloride to form microcapsules with a polyelectrolyte complex membrane by electrostatic interactions between the two oppositely charged polymers.The microcapsules were then studied for entrapment efficiency,drug-polymer compatibility and surface morphology. In vitro drug release study in presence and absence of cecal content were also studied.Further, kinetic modellings were employed to find out release mechanisms.Results:Albendazole loaded microspheres showd high entrapment efficiency(72.8%) and the microcapsules were free flowing,non aggregated and spherical,between 600 and 1 000μm in diameter.The surface of microcapsules were found to be porous and wavy.The FT-IR spectrum showed that there is no interaction between the polymer and the drug.The in vitro drug release study found to be affected by change in chitosan,sodium alginate and HPMC concentration.The microcapsules with 2.5% sodium alginate and 0.4% chitosan shown minimum release in gastrointestinal simulated condition but shows maximum drug release at the end of 24th hour in presence of cecal content.The rate of drug release follows Korsmeyer-peppas model that was the drug release is by diffusion and erosion.Conclusions:The study reveals that Albendazole loaded chitosanalginate based microsphere can be used effectively for the colon targeting.
基金financially supported by the Science Foundation of Sichuan Province(Grant No.2016FZ0070)the Natural Science Foundation of China(NSFC,201476145)the technical support for Materials Characterization from The Analytical and Testing Center of Sichuan University
文摘The ternary transitional metal oxide NiCo_2O_4 is a promising anode material for sodium ion batteries due to its high theoretical capacity and superior electrical conductivity. However, its sodium storage capability is severely limited by the sluggish sodiation/desodiation reaction kinetics. Herein, NiCo_2O_4 double-shelled hollow spheres were synthesized via a microwave-assisted, fast solvothermal synthetic procedure in a mixture of isopropanol and glycerol, followed by annealing. Isopropanol played a vital role in the precipitation of nickel and cobalt,and the shrinkage of the glycerol quasi-emulsion under heat treatment was responsible for the formation of the double-shelled nanostructure. The as-synthesized productwas tested as an anode material in a sodium ion battery,was found to exhibit a high reversible specific capacity of 511 m Ahg^(-1) at 100 m Ag^(-1), and deliver high capacity retention after 100 cycles.
基金supported by the National Key Research and Development Program of China(2020YFA0908200)the National Natural Science Foundation of China(52073060 and 61927805)the Shenzhen Fundamental Research Program(JCYJ20190813152616459).
文摘Bone defects caused by trauma,tumor,or osteoarthritis remain challenging due to the lack of effective treatments in clinic.Stem cell transplantation has emerged as an alternative approach for bone repair and attracted widespread attention owing to its excellent biological activities and therapy effect.The attempts to develop this therapeutic approach focus on the generation of effective cell delivery vehicles,since the shortcomings of direct injection of stem cells into target tissues.Here,we developed a novel core-shell microcapsule with a stem cell-laden core and a biomass shell by using all-aqueous phase microfluidic electrospray technology.The designed core-shell microcapsules showed a high cell viability during the culture procedure.In addition,the animal experiments exhibited that stem cell-laden core-shell microcapsules have good biocompatibility and therapeutic effect for bone defects.This study indicated that the core-shell biomass microcapsules generated by microfluidic electrospray have promising potential in tissue engineering and regenerative medicine.
基金Supported by State Key Laboratory of Advanced Power Transmission Technology(GEIRI-SKL-2018-005)Guangzhou Major Industrial Technology Research Plan(201802010022)Guangzhou Science and Technology Project(201710010186)。
文摘The self-healing microcapsules can be buried in the coating to improve the anticorrosive ability.In this paper,self-healing microcapsules of polyurea(PU)/melamine resin(MF)double shell were prepared by in-situ polymerization and interfacial polymerization with isocyanate as the core material.Scanning electron microscope was used to observe the microcapsule morphology.The structures of microcapsules prepared with different chain extenders were characterized by Fourier transform infrared spectroscopy.The micromanipulation system was used to loading–holding,loading–unloading and loading to rupture individual microcapsules,so as to explore the mechanical properties of microcapsules.The Young’s modulus corresponding to microcapsules was calculated by mathematical model fitting.The self-healing properties of microcapsule coating were characterized by optical microscope.The experimental results showed that the microcapsule shell prepared under optimized conditions had a complete morphology and good mechanical properties.The microcapsule was in the elastic deformation stage under small deformation,and the plastic deformation stage under large deformation.The Young’s modulus range of microcapsules was 9.29–14.51 MPa,and the corresponding Young’s modulus could be prepared by adjusting the process.The surface crack of the coating containing microcapsule could heal itself after48 h in a humid environment.
基金Funded by the Beijing Talent and Innovation Project (No. 2006)
文摘In order to improve the performance of non-asbestos composite auto brake pads that are composed of matrix resin, reinforced material and fillers, a novel method with new technology of self-heal microcapsules was proposed. Nano reinforced fillers' effects were also considered in the experiment project. Five recipe designs for new composite auto brake pads were carried out and cor-responding samples were prepared as well. The friction coefficient and wearing properties at certain temperature, impact intensity and hardness were comparatively studied. Investigations indicate that properties of such composite auto brake pads meet the requirements of the national standards while microcapsule's weight content varies from 5.5wt%-1.09wt% of matrix resin and microcapsule's loca-tion varies in the pads. Nano reinforced fillers have the effects of increasing composites' impact in-tensity and hardness. Application of self-healing microcapsules in auto brake pads is feasible.