适应并离网模式切换的DFIG电磁暂态仿真建模

目前,常用的商业仿真软件中的双馈式感应发电机(double-fed Induction Generator,DFIG)模型通常不支持离网运行模式,难以实现风力发电系统由离网到并网的全过程电磁暂态仿真,对电力系统仿真分析工作带来极大不便。研究适应并离网模式切换的DFIG电磁暂态仿真建模方法。基于模块化思想分别对风力机、异步电机、变流器以及断路器进行建模,在系统组装形成DFIG风力发电系统电磁暂态仿真模型。提出了适应并离网模式切换的DFIG受控源等效电路模型和离散时间域实现方法,通过设计状态变量矩阵元素的截取和扩充算法实现了模型在并离网模式下的无缝衔接。在MATLAB/Simulink中搭建DFIG发电系统模型对所提方法和模型进行验证,仿真结果表明,所提建模方法能够很好地支持DFIG离网运行模式,实现DFIG由离网到并网的全过程电磁暂态仿真。

Steady State Analysis of a Doubly Fed Induction Generator

In this paper, we present the steady state analysis of a double-fed induction generator (DFIG) adopted for wind power generation. The three-phase induction machine connected to the network, to work as a generator for wind farms, is excited on the rotor circuit by a slip-frequency current injected to the rotor, from an exciter mounted on the same shaft of the machine. The resulting rotating magnetic field rotates at synchronous speed;as such the generated power has a constant frequency independent of the shaft speed. Effects of the excitation voltage magnitude and phase angle on the active and reactive power are studied, when the machine runs at constant speed. It has been shown that by controlling the excitation voltage magnitude and phase angle would control the mode of operation of the machine;motor mode or generator mode. Furthermore, the effects of the shaft speed on the active and reactive power at constant excitation voltage magnitude and constant phase angle are also investigated.

An analytic electromagnetic calculation method for performance evolution of doubly fed induction generators for wind turbines

An analytic electromagnetic calculation method for doubly fed induction generator(DFIG) in wind turbine system was presented. Based on the operation principles, steady state equivalent circuit and basic equations of DFIG, the modeling for electromagnetic calculation of DFIG was proposed. The electromagnetic calculation of DFIG was divided into three steps: the magnetic flux calculation, parameters derivation and performance checks. For each step, the detailed numeric calculation formulas were all derived. Combining the calculation formulas, the whole electromagnetic calculation procedure was established, which consisted of three iterative calculation loops, including magnetic saturation coefficient, electromotive force and total output power. All of the electromagnetic and performance data of DIFG can be calculated conveniently by the established calculation procedure, which can be used to evaluate the new designed machine. A 1.5 MW DFIG designed by the proposed procedure was built, for which the whole type tests including no-load test, load test and temperature rising test were carried out. The test results have shown that the DFIG satisfies technical requirements and the test data fit well with the calculation results which prove the correctness of the presented calculation method.

Modeling and small-signal stability analysis of doubly-fed induction generator integrated system

Owing to their stability,doubly-fed induction generator(DFIG)integrated systems have gained considerable interest and are the most widely implemented type of wind turbines and due to the increasing escalation of the wind generation penetration rate in power systems.In this study,we investigate a DFIG integrated system comprising four modules:(1)a wind turbine that considers the maximum power point tracking and pitch-angle control,(2)induction generator,(3)rotor/grid-side converter with the corresponding control strategy,and(4)AC power grid.The detailed small-signal modeling of the entire system is performed by linearizing the dynamic characteristic equation at the steady-state value.Furthermore,a dichotomy method is proposed based on the maximum eigenvalue real part function to obtain the critical value of the parameters.Root-locus analysis is employed to analyze the impact of changes in the phase-locked loop,short-circuit ratio,and blade inertia on the system stability.Lastly,the accuracy of the small-signal model and the real and imaginary parts of the calculated dominant poles in the theoretical analysis are verified using PSCAD/EMTDC.

Effects of Wind Turbines Equipped with Doubly-fed Induction Generators on Distance Protection

Nowadays wind energy is the fastest growing renewable energy resource in the world.The problems of integrating wind farms are caused by changes of wind speed during a day.Moreover,the behaviors of wind turbines equipped with doubly-fed induction generators differ fundamentally from synchronous generators.Therefore,more considerations are needed to analyze the performances of the distance protection relays.The protection of a wind farm with distance relay is inspected.By changing the conditions of the wind farm,the characteristics of the distance relay are studied.

一种多地DFIG联动控制的多馈入受端系统连续换相失败抑制策略

我国沿海负荷中心呈现直流多馈入的结构特征,海上风电的大规模开发使得系统在非正常工况下容易诱发次同步振荡,电压的快速波动可能会造成连续换相。针对该现象进行机理分析,通过优化双馈风电机组(doubly fed induction generator,DFIG)的控制方法,有效抑制了次同步振荡。同时,针对不同区域风电场调节能力差异,通过关联各直流落点的多馈入交互作用因子(multi-infeed interaction factor,MIIF),充分调动不同区域风电场的补偿能力抬升系统电压。该方法有效地抑制直流多馈入系统的异地连续换相失败。最后,通过PSCAD仿真对比验证所提策略的有效性。

Probabilistic Load Flow Algorithm with the Power Performance of Double-Fed Induction Generators

Probabilistic load flow(PLF)algorithm has been regained attention,because the large-scale wind power integration into the grid has increased the uncertainty of the stable and safe operation of the power system.The PLF algorithm is improved with introducing the power performance of double-fed induction generators(DFIGs)for wind turbines(WTs)under the constant power factor control and the constant voltage control in this paper.Firstly,the conventional Jacobian matrix of the alternating current(AC)load flow model is modified,and the probability distributions of the active and reactive powers of the DFIGs are derived by combining the power performance of the DFIGs and the Weibull distribution of wind speed.Then,the cumulants of the state variables in power grid are obtained by improved PLF model and more accurate power probability distributions.In order to generate the probability density function(PDF)of the nodal voltage,Gram-Charlier,Edgeworth and Cornish-Fisher expansions based on the cumulants are applied.Finally,the effectiveness and accuracy of the improved PLF algorithm is demonstrated in the IEEE 14-RTS system with wind power integration,compared with the results of Monte Carlo(MC)simulation using deterministic load flow calculation.

High Frequency Charging Techniques—Grid Connected Power Generation Using Switched Reluctance Generator

Power generation becomes the need of developed, developing and under developed countries to meet their increasing power requirements. When affordability increases their requirement of power increases, this happens when increased per capita consumption. The existing power scenario states that highest power is produced using firing of coals called thermal energy. A high efficiency Switched Reluctance Generator (SRG) based high frequency switching scheme to enhance the output for grid connectivity is designed, fabricated and evaluated. This proposed method generates the output for the low wind speed. It provides output at low speed because of multi-level DC-DC converter and storage system. It is an efficient solution for low wind power generation. The real time readings and results are discussed.

不平衡电压下的DFIG模型预测直接功率控制

为提高双馈风力发电机在不平衡电网电压工况下的运行性能,提出一种扩张状态观测器与模型预测控制相结合的直接功率控制策略。首先,采用扩张状态观测器对系统中因负序分量引起的不确定项、模型误差及外部扰动等不确定因素进行参数估计。然后,结合模型预测控制理论建立双馈风力发电机模型预测直接功率控制数学模型。最后,针对不平衡电网电压下的功率振荡分量讨论功率优化补偿方案。仿真结果验证了所提方法的有效性。

Control of Doubly Fed Induction Generator under Unbalanced Voltages for Reduction of Torque Pulsation

The unbalanced voltages cause negative effects on the doubly fed induction generator （DFIG） sucn as torque pulsation,and increased stator current. Based on the symmetrical component theory, the torque pulsation is the consequence of the interaction of stator and rotor currents of different sequences. This paper presents a control technique to reduce the effect of unbalanced voltages on the DFIG in wind energy conversion systems. The negative sequence stator voltage is derived from the unbalanced three phase stator voltages. The compensated rotor voltage in terms of the derived negative sequence stator voltage and slip which minimizes the negative stator and rotor currents is proposed. The results from the simulation of control system with steady state model and dynamic model of the DFIG show that additional control loop with compensated voltage can significantly reduce torque and reactive power pulsations.

基于LESO的DFIG-GSC反馈线性化直接功率控制

为了提高双馈风力发电机网侧变换器(DFIG-GSC)这个强耦合非线性系统的性能,提出了一种反馈线性化直接功率控制策略。首先在αβ坐标系下建立以有功功率、无功功率为变量的DFIG-GSC的数学模型,针对模型中的强耦合项采用反馈线性化进行解耦,得到其线性模型,再结合滑模控制理论设计出功率内环的控制律。由于功率内环控制律中未建模部分和不确定因素会对控制效果产生影响,采用线性扩张状态观测器对其进行观测并对其控制量进行修正。同时电压外环采用滑模控制来提高直流侧电压的响应速度。最后搭建仿真模型与传统PI控制以及直接功率控制进行比较,验证了所提控制策略的合理性和有效性。

Utilization of DFIG on an Islanded Power Generation and Distribution System

The utilization of wind generation equipment, such as DFIGs （double fed induction generators）, interconnected to islanded power generation and distribution systems is investigated in order to determine their effects on the overall system operating characteristics and stability. The use of a stable power station （with high speed machines） will be critical in achieving fast and reliable transient response to network events, in particular, when large transient loads are expected on a continuous basis, i.e., industrial mining and mineral processing equipment. Simulation results of this paper assist in understanding how small power stations and wind generation equipment respond to large transients in an islanded network. In particular, detailed simulations and analyses will be presented on impacts of distributed wind generation units （1.5 MW DF1G） on the stability of a small weak network. The novelty of this paper is on detailed analyses and simulation of weak networks with interconnects DFIG＇s including their impacts on system stability under various transient operating conditions.

适用于DFIG连接到直流微网的双变换器设计与实现

针对双馈感应式发电机DFIG(doubly-fed induction generator)-DC连接系统电流谐波严重、双VSI连接系统损耗大等问题,设计了1种将三相DFIG连接到直流微电网的新型双变换器连接系统。首先,详细阐述了双变换器连接系统的拓扑结构、脉宽调制PWM(pulse-width modulation)测量和DFIG模型等工作原理。与传统连接系统不同,所提连接系统采用开放端绕组结构,在定子绕组的每一侧使用1个三桥臂整流器,这些桥臂通常由绝缘栅双极晶体管IGBT(insulated gate bipolar transistor)组成,为了减少控制开关的数量和降低成本,采用二极管替代了1个整流器中的IGBT;然后,给出了新型拓扑结构下SSC和RSC的控制策略;接着,与DFIG-DC连接系统和双VSI连接系统在电流谐波畸变、转矩脉动和半导体损耗等方面进行了仿真比较,说明所提方法优越性;最后,针对0.56 kW DFIG进行实验验证,结果表明了所提方法在损耗、谐波以及转矩脉动的优势。

结合DFIG功率特性研究风电并网对系统功角稳定性的影响

大容量风电并网条件下的系统功角稳定特性对于新能源送出与消纳具有重要意义。基于双馈风力发电机组的运行与控制原理分析了其出力特性,指出双馈机组在暂态稳定分析中可近似看做恒功率源;结合实测曲线,说明恒功率源模型较实际情况更具保守性。以并列运行同步机组故障清除后输出电磁功率为指标,研究送端电网风火互替对于系统功角稳定水平的影响,提出双馈风电等量替代同步电源将改善功角稳定水平,并从系统能量平衡角度进一步探讨了其内在原理与适用范围。最后,通过单机?无穷大系统、两机系统和哈密风火打捆送出系统算例仿真验证了上述结论。

基于量测信号扰动的DFIG变流器控制参数辨识方法

双馈感应发电机(DFIG)的变流控制器模型是整个机组模型中的关键部分。变流控制器的参数众多且内外环比例—积分(PI)控制器之间存在级联,常规辨识方法或遇到参数可辨识性问题,或工程实现难度较大。文中提出一种以"分步辨识、交互迭代"为特点,基于二次侧量测信号扰动的控制器参数辨识方法。该方法分别在变流控制器中各PI控制器输入端所用的量测信号上施加扰动,从而突出某个PI控制器在特定量测信号扰动下的作用,并将该PI控制器的可测量控制目标作为观测变量,进而重点辨识其参数。对于存在级联的两个PI控制器,先对后一级PI控制器所用量测信号施加扰动,同时屏蔽前一级PI控制器所用量测信号的变化,从而可实现两个级联PI控制器参数的解耦辨识。该方法可以使变流控制器中每个PI控制器的两个参数在特定的量测信号扰动下被单独辨识,有效保证了参数的可辨识性;而对于全部待辨识参数,可通过多轮交互迭代辨识进一步提高整体辨识精度。

应用于DFIG风电场的VSC-HVDC控制策略

随着风力发电的快速发展,如何连接风电场和电网成为至关重要的问题。研究了基于双馈感应电机(DFIG)的风电场连接方式及控制策略,通过与交流输电和电流源型高压直流输电(CSC- HVDC)的比较,说明电压源型高压直流输电(VSC-HVDC)技术在连接风电场与电网方面具有独特优势。在换流站的dq解耦控制基础上,对DFIG与VSC-HVDC的换流站的控制设计进行了研究。利用PSCAD/EMTDC平台对该方案进行了仿真研究。仿真结果表明,该方案可以实现一个换流站连接多台DFIG的结构,并具有良好的控制效果。

VSCF-DFIG在电压瞬间跌落情况下的应对策略

变速恒频(VSCF)双馈感应发电机(DFIG)在电网电压跌落的情况下,通过连接在转子绕组上的电阻来为电压跌落期间在转子侧产生的浪涌电流提供一条通路,从而达到限制转子回路最大电流的目的。在电网需要时,快速向电网提供无功功率,调节电网电压和稳定弱电网。通过保持系统稳定性,减少电压崩溃的危险,降低电网解列的影响。所有结果通过了仿真验证。

改进的DFIG与VSC-HVDC协调控制改善风电场低电压穿越能力

经VSC-HVDC并网风电系统在风电场侧故障时,风电机组出口母线电压过低,极易引起风力机脱网。而双馈风力发电机(DFIG)传统的Crowbar技术在故障时将转子侧变流器(RSC)短接,使发电机定子侧失去了为电网提供无功的能力,风力机的低电压穿越能力较低。提出一种改进的DFIG模型,加入了主动式DC-Chopper,与传统的Crowbar相配合,降低Crowbar动作的概率,使得DFIG转子侧变流器可以控制定子侧在故障时期继续提供无功功率。并利用此改进的DFIG与VSC-HVDC协调控制,改善风电场侧母线电压水平。通过算例仿真表明,在严重故障时采用改进式DFIG的Crowbar仍未动作。从而大大降低Crowbar动作的概率,双馈风电机组RSC故障期间可以继续投入运行并为电网提供无功支持。完成故障期间DFIG两侧变流器与VSC-HVDC风电场侧变流器(WFVSC)之间的无功协调,使风电场具有更好的低电压穿越能力(Low Voltage Ride Though,LVRT)。

采用串联网侧变换器的DFIG风电系统低电压穿越控制

双馈感应发电机(DFIG)因其对电网故障的敏感性,其低电压穿越运行控制技术备受关注。文中针对定子侧加装串联网侧变换器的新型DFIG风电系统,详细研究了其低电压穿越运行特性,提出了一种适用于新拓扑下发电系统的运行控制方案:通过控制串联网侧变换器抑制定子磁链暂态直流分量及电网电压负序分量对发电机转子侧的不良影响;通过控制转子侧变换器进一步限制故障时发电机的定、转子电流,从而实现发电系统的低电压穿越运行。仿真结果表明:采用所提出的控制方案,可实现电网故障时DFIG风电系统的零电压穿越运行;采用新拓扑的DFIG风电系统具有优良的电网对称及非对称短路故障穿越能力。