To investigate the steady thermal hydraulic characteristics of U-tube steam generator(SG), a 1D simulation code based on the four-equation drift flux model is developed. The U-tube channels presumably consist mainly o...To investigate the steady thermal hydraulic characteristics of U-tube steam generator(SG), a 1D simulation code based on the four-equation drift flux model is developed. The U-tube channels presumably consist mainly of the primary channel, secondary channel, and tube wall. In the sub-cooling regions of the primary and secondary channels, flow is simulated using the single-phase flow model, whereas that in the boiling regions of the secondary channels is simulated using the four-equation drift flux model. The first-order equations of upwind difference are derived based on the staggered grid. Steady-state thermal hydraulic parameters are obtained with a cross-iteration scheme of heat balance and natural circulation requirement. The developed code is applied to analyze the SG behavior of the Qinshan I Nuclear Power Plant under 100%, 75%, 50%, 30%, and 15% power conditions. Analysis results are then compared with the simulation results obtained using RELAP5.展开更多
In the present paper, Lie group symmetry method is used to obtain some exact solutions for a hyperbolic system of partial differential equations （PDEs）, which governs an isothermal no-slip drift-flux model for multi...In the present paper, Lie group symmetry method is used to obtain some exact solutions for a hyperbolic system of partial differential equations （PDEs）, which governs an isothermal no-slip drift-flux model for multiphase flow problem. Those sym- metries are used for the governing system of equations to obtain infinitesimal transforma- tions, which consequently reduces the governing system of PDEs to a system of ODEs. Further, the solutions of the system of ODEs which in turn produces some exact solutions for the PDEs are presented. Finally, the evolutionary behavior of weak discontinuity is discussed.展开更多
The two-phase flow models are commonly used in industrial applications, such as nuclear, power, chemical-process, oil-and-gas, cryogenics, bio-medical, micro-technology and so on. This is a survey paper on the study o...The two-phase flow models are commonly used in industrial applications, such as nuclear, power, chemical-process, oil-and-gas, cryogenics, bio-medical, micro-technology and so on. This is a survey paper on the study of compressible nonconservative two-fluid model, drift-flux model and viscous liquid-gas two-phase flow model. We give the research developments of these three two-phase flow models, respectively. In the last part, we give some open problems about the above models.展开更多
The flow rate of the oil-water horizontal flow is measured by the combination of the turbine flow meter and the singlebeam gamma ray densitometry. The emphasis is placed on the effects of the pipe diameter, the oil vi...The flow rate of the oil-water horizontal flow is measured by the combination of the turbine flow meter and the singlebeam gamma ray densitometry. The emphasis is placed on the effects of the pipe diameter, the oil viscosity and the slip velocity on the measurement accuracy. It is shown that the mixture flow rate measured by the turbine flow meter can meet the application requirement in the water continuous pattern（ o- w flow pattern）. In addition, by introducing the developed drift-flux model into the measurement system, the relative errors of measurements for component phase flow rates can be controlled within ±5%. Although more accurate methods for the flow rate measurement are available, the method suggested in this work is advantageous over other methods due to its simplicity for practical applications in the petroleum industry.展开更多
基金Supported by the National Natural Science Foundation of China(Nos.51376065 and 51176052)
文摘To investigate the steady thermal hydraulic characteristics of U-tube steam generator(SG), a 1D simulation code based on the four-equation drift flux model is developed. The U-tube channels presumably consist mainly of the primary channel, secondary channel, and tube wall. In the sub-cooling regions of the primary and secondary channels, flow is simulated using the single-phase flow model, whereas that in the boiling regions of the secondary channels is simulated using the four-equation drift flux model. The first-order equations of upwind difference are derived based on the staggered grid. Steady-state thermal hydraulic parameters are obtained with a cross-iteration scheme of heat balance and natural circulation requirement. The developed code is applied to analyze the SG behavior of the Qinshan I Nuclear Power Plant under 100%, 75%, 50%, 30%, and 15% power conditions. Analysis results are then compared with the simulation results obtained using RELAP5.
基金Project supported by the Ministry of Minority Affairs through UGC,Government of India(No.F1-17.1/2010/MANF-CHR-ORI-1839)the Industrial Consultancy,IIT Kharagpur(No.IIT/SRIC/ISIRD/2013-14)
文摘In the present paper, Lie group symmetry method is used to obtain some exact solutions for a hyperbolic system of partial differential equations （PDEs）, which governs an isothermal no-slip drift-flux model for multiphase flow problem. Those sym- metries are used for the governing system of equations to obtain infinitesimal transforma- tions, which consequently reduces the governing system of PDEs to a system of ODEs. Further, the solutions of the system of ODEs which in turn produces some exact solutions for the PDEs are presented. Finally, the evolutionary behavior of weak discontinuity is discussed.
基金supported by the National Natural Science Foundation of China(11722104,11671150)supported by the National Natural Science Foundation of China(11571280,11331005)+3 种基金supported by the National Natural Science Foundation of China(11331005,11771150)by GDUPS(2016)the Fundamental Research Funds for the Central Universities of China(D2172260)FANEDD No.201315
文摘The two-phase flow models are commonly used in industrial applications, such as nuclear, power, chemical-process, oil-and-gas, cryogenics, bio-medical, micro-technology and so on. This is a survey paper on the study of compressible nonconservative two-fluid model, drift-flux model and viscous liquid-gas two-phase flow model. We give the research developments of these three two-phase flow models, respectively. In the last part, we give some open problems about the above models.
基金Project supported by the National Key Scientific Instruments in China(Grant No.2011YQ120048-02)
文摘The flow rate of the oil-water horizontal flow is measured by the combination of the turbine flow meter and the singlebeam gamma ray densitometry. The emphasis is placed on the effects of the pipe diameter, the oil viscosity and the slip velocity on the measurement accuracy. It is shown that the mixture flow rate measured by the turbine flow meter can meet the application requirement in the water continuous pattern（ o- w flow pattern）. In addition, by introducing the developed drift-flux model into the measurement system, the relative errors of measurements for component phase flow rates can be controlled within ±5%. Although more accurate methods for the flow rate measurement are available, the method suggested in this work is advantageous over other methods due to its simplicity for practical applications in the petroleum industry.
