A novel integrated microfluidic chip for on-demand electrostatic droplet charging and sorting

On-demand droplet sorting is extensively applied for the efficient manipulation and genome-wide analysis of individual cells.However,state-of-the-art microfluidic chips for droplet sorting still suffer from low sorting speeds,sample loss,and labor-intensive preparation procedures.Here,we demonstrate the development of a novel microfluidic chip that integrates droplet generation,on-demand electrostatic droplet charging,and high-throughput sorting.The charging electrode is a copper wire buried above the nozzle of the microchannel,and the deflecting electrode is the phosphate buffered saline in the microchannel,which greatly simplifies the structure and fabrication process of the chip.Moreover,this chip is capable of high-frequency droplet generation and sorting,with a frequency of 11.757 kHz in the drop state.The chip completes the selective charging process via electrostatic induction during droplet generation.On-demand charged microdroplets can arbitrarilymove to specific exit channels in a three-dimensional(3D)-deflected electric field,which can be controlled according to user requirements,and the flux of droplet deflection is thereby significantly enhanced.Furthermore,a lossless modification strategy is presented to improve the accuracy of droplet deflection or harvest rate from 97.49% to 99.38% by monitoring the frequency of droplet generation in real time and feeding it back to the charging signal.This chip has great potential for quantitative processing and analysis of single cells for elucidating cell-to-cell variations.

Lipid droplets in the nervous system:involvement in cell metabolic homeostasis

Lipid droplets serve as primary storage organelles for neutral lipids in neurons,glial cells,and other cells in the nervous system.Lipid droplet formation begins with the synthesis of neutral lipids in the endoplasmic reticulum.Previously,lipid droplets were recognized for their role in maintaining lipid metabolism and energy homeostasis;however,recent research has shown that lipid droplets are highly adaptive organelles with diverse functions in the nervous system.In addition to their role in regulating cell metabolism,lipid droplets play a protective role in various cellular stress responses.Furthermore,lipid droplets exhibit specific functions in neurons and glial cells.Dysregulation of lipid droplet formation leads to cellular dysfunction,metabolic abnormalities,and nervous system diseases.This review aims to provide an overview of the role of lipid droplets in the nervous system,covering topics such as biogenesis,cellular specificity,and functions.Additionally,it will explore the association between lipid droplets and neurodegenerative disorders.Understanding the involvement of lipid droplets in cell metabolic homeostasis related to the nervous system is crucial to determine the underlying causes and in exploring potential therapeutic approaches for these diseases.

The flow behavior of droplet adsorption on a liquid-liquid interface accompanied by cross-linking reaction and phase separation in a microchannel

The adsorption process of droplets on the liquid-liquid interface and phase separation process can regulate the spatial distribution of the fluid system,which are crucial for chemical engineering.However,the cross-linking reaction,which is widely used in the field of polymers,can change the physical properties of the fluids and affect the flow behavior accordingly.A configuration of microchannels is designed to conveniently generate uniform droplets in one phase of the parallel flow.The flow behavior of the adsorption process of sodium alginate droplets on the liquid-liquid interface is investigated,and the subsequent process of phase separation is studied.In the process of droplet adsorption,the crosslinking reaction occurs synchronously,which makes the droplet viscosity and the elasticity modules of the droplet surface increase,thus affecting the dynamics of the adsorption process and the equilibrium shape of the droplet.The variation of the adsorption length with time is divided into three stages,which all conform to power law relationship.The exponents of the second and third stages deviate from the results of the Tanner's law.The flow pattern maps of droplet adsorption and phase separation are drawn,and the operating ranges of complete adsorption and complete separation are provided.This study provides a theoretical basis for further studying the flow behavior of droplets with cross-linking reaction in a microchannel.

Droplet morphology analysis of drop-on-demand inkjet printing

As an accurate 2D/3D fabrication tool,inkjet printing technology has great potential in preparation of micro electronic devices.The morphology of droplets produced by the inkjet printer has a great impact on the accuracy of deposition.In this study,the drop-on-demand(DoD)inkjet simulation model was established,and the accuracy of the simulation model was verified by corresponding experiments.The simulation result shows that the velocity of the droplet front and tail,as well as the time to disconnect from the nozzle is mainly affected by density(ρ),viscosity(μ)and surface tension(σ)of droplets.When the liquid filament is about to disconnect from the nozzle,the filament length and filament front velocity are found to have a linear correlation withσ/ρμand ln(ρ/(μσ1/2)).

Self-propelled Leidenfrost droplets on femtosecond-laser-induced surface with periodic hydrophobicity gradient

The controllable transfer of droplets on the surface of objects has a wide application prospect in the fields of microfluidic devices,fog collection and so on.The Leidenfrost effect can be utilized to significantly reduce motion resistance.However,the use of 3D structures limits the widespread application of self-propulsion based on Leidenfrost droplets in microelectromechanical system.To manipulate Leidenfrost droplets,it is necessary to create 2D or quasi-2D geometries.In this study,femtosecond laser is applied to fabricate a surface with periodic hydrophobicity gradient(SPHG),enabling directional self-propulsion of Leidenfrost droplets.Flow field analysis within the Leidenfrost droplets reveals that the vapor layer between the droplets and the hot surface can be modulated by the SPHG,resulting in directional propulsion of the inner gas.The viscous force between the gas and liquid then drives the droplet to move.

On the spreading behavior of a droplet on a circular cylinder using the lattice Boltzmann method

The study of a droplet spreading on a circular cylinder under gravity was carried out using the pseudo-potential lattice Boltzmann high-density ratios multiphase model with a non-ideal Peng–Robinson equation of state. The calculation results indicate that the motion of the droplet on the cylinder can be divided into three stages: spreading, sliding, and aggregating.The contact length and contact time of a droplet on a cylindrical surface can be affected by factors such as the wettability gradient of the cylindrical wall, the Bond number, and droplet size. Furthermore, phase diagrams showing the relationship between Bond number, cylinder wall wettability gradient, and contact time as well as maximum contact length for three different droplet sizes are given. A theoretical foundation for additional research into the heat and mass transfer process between the droplet and the cylinder can be established by comprehending the variable rules of maximum contact length and contact time.

Coordination of distinctive pesticide adjuvants and atomization nozzles on droplet spectrum evolution for spatial drift reduction

Pesticide adjuvants,as crop protection products,have been widely used to reduce drift loss and improve utilization efficiency by regulating droplet spectrum.However,the coordinated regulation mechanisms of adjuvants and nozzles on droplet spectrum remain unclear.Here,we established the relationship between droplet spectrum evolution and liquid atomization by investigating the typical characteristics of droplet diameter distribution near the nozzle.Based on this,the regulation mechanisms of distinctive pesticide adjuvants on droplet spectrum were clarified,and the corresponding drift reduction performances were quantitively evaluated by wind tunnel experiments.It shows that the droplet diameter firstly shifts to the smaller due to the liquid sheet breakup and then prefers to increase caused by droplet interactions.Reducing the surface tension of sprayed liquid facilitates the uniform liquid breakup and increasing the viscosity inhibits the liquid deformation,which prolong the atomization process and effectively improve the droplet spectrum.As a result,the drift losses of flat-fan and hollow cone nozzles are reduced by about 50%after adding organosilicon and vegetable oil adjuvants.By contrast,the air induction nozzle shows a superior anti-drift ability,regardless of distinctive adjuvants.Our findings provide insights into rational adjuvant design and nozzle selection in the field application.

Numerical Simulation of Droplet Generation in Coaxial Microchannels

In this study,numerical simulations of the pinching-off phenomena displayed by the dispersed phase in a continuous phase have been conducted using COMSOL Multiphysics(level-set method).Four flow patterns,namely“drop flow”,“jet flow”,“squeeze flow”,and“co-flow”,have been obtained for different flow velocity ratios,channel diameter ratios,density ratios,viscosity ratios,and surface tension.The flow pattern map of two-phase flow in coaxial microchannels has been obtained accordingly,and the associated droplet generation process has been critically discussed considering the related frequency,diameter,and pinch-off length.In particular,it is shown that the larger the flow velocity ratio,the smaller the diameter of generated droplets and the shorter the pinch-off length.The pinch-off length of a droplet is influenced by the channel diameter ratio and density ratio.The changes in viscosity ratio have a negligible influence on the droplet generation pinching frequency.With an increase in surface tension,the frequency of generation and pinch-off length of droplets decrease,but for small surface tension the generation diameter of droplet increases.

OPA3 overexpression modulates lipid droplet production and sensitizes colorectal cancer cells to bevacizumab treatment

Background:Colorectal cancer(CRC)represents a substantial risk to public health.Bevacizumab,thefirst US FDA-approved antiangiogenic drug(AAD)for human CRC treatment,faces resistance in patients.The role of lipid metabolism,particularly through OPA3-regulated lipid droplet production,in overcoming this resistance is under investigation.Methods:The protein expression pattern of OPA3 in CRC primary/normal tissues was evaluated by bioinformatics analysis.OPA3-overexpressed SW-480 and HCT-116 cell lines were established,and bevacizumab resistance and OPA3 effects on cell malignancy were examined.OPA3 protein/mRNA expression and lipid droplet-related genes were measured with Western blot and qRT-PCR.OPA3 subcellular localization was detected using immunofluorescence.Proliferation and apoptosis were assessed via colony formation andflow cytometry.Tube formation assays were conducted to assess the angiogenic potential of human umbilical vein endothelial cells(HUVECs).Lipid analysis was used to measure the phosphatidylcholine(PC)and lysophosphatidylcholine(LPC)levels in CRC cells.Results:Bioinformatics analysis revealed that OPA3 was downregulated in CRC.Overexpression of OPA3 inhibited CRC cell proliferation,stimulated apoptosis,and suppressed the angiogenic ability of HUVECs.OPA3 effectively reversed the resistance of CRC cells to bevacizumab and decreased lipid droplet production in CRC cells.Additionally,OPA3 reversed the bevacizumab-induced lipid droplet production in CRC cells,thereby increasing CRC cell sensitivity to bevacizumab treatment.Conclusion:This study suggests that OPA3 modulates lipid metabolism in CRC cells and reduces resistance to bevacizumab in CRC cells.Therefore,OPA3 may be a potential therapeutic target against the AAD resistance in CRC.

Triboelectric‘electrostatic tweezers'for manipulating droplets on lubricated slippery surfaces prepared by femtosecond laser processing

The use of‘Electrostatic tweezers'is a promising tool for droplet manipulation,but it faces many limitations in manipulating droplets on superhydrophobic surfaces.Here,we achieve noncontact and multifunctional droplet manipulation on Nepenthes-inspired lubricated slippery surfaces via triboelectric electrostatic tweezers(TETs).The TET manipulation of droplets on a slippery surface has many advantages over electrostatic droplet manipulation on a superhydrophobic surface.The electrostatic field induces the redistribution of the charges inside the neutral droplet,which causes the triboelectric charged rod to drive the droplet to move forward under the electrostatic force.Positively or negatively charged droplets can also be driven by TET based on electrostatic attraction and repulsion.TET enables us to manipulate droplets under diverse conditions,including anti-gravity climb,suspended droplets,corrosive liquids,low-surface-tension liquids(e.g.ethanol with a surface tension of 22.3 mN·m^(-1)),different droplet volumes(from 100 nl to 0.5 ml),passing through narrow slits,sliding over damaged areas,on various solid substrates,and even droplets in an enclosed system.Various droplet-related applications,such as motion guidance,motion switching,droplet-based microreactions,surface cleaning,surface defogging,liquid sorting,and cell labeling,can be easily achieved with TETs.

Porcine enteric alphacoronavirus infection increases lipid droplet accumulation to facilitate the virus replication

Coronaviruses are widely transmissible between humans and animals, causing diseases of varying severity. Porcine enteric alphacoronavirus(PEAV) is a newly-discovered pathogenic porcine enteric coronavirus in recent years, which causes watery diarrhea in newborn piglets. The host inflammatory responses to PEAV and its metabolic regulation mechanisms remain unclear, and no antiviral studies have been reported. Therefore, we investigated the pathogenic mechanism and antiviral drugs of PEAV. The transcriptomic analysis of PEAV-infected host cells revealed that PEAV could upregulate lipid metabolism pathways. In lipid metabolism, steady-state energy processes, which can be mediated by lipid droplets(LDs), are the main functions of organelles. LDs are also important in viral infection and inflammation. In infected cells, PEAV increased LD accumulation, upregulated NF-κB signaling, promoted the production of the inflammatory cytokines IL-1β and IL-8, and induced cell death. Inhibiting LD accumulation with a DGAT-1 inhibitor significantly inhibited PEAV replication, downregulated the NF-κB signaling pathway, reduced the production of IL-1β and IL-8, and inhibited cell death. The NF-κB signaling pathway inhibitor BAY11-7082 significantly inhibited LD accumulation and PEAV replication. Metformin hydrochloride also exerted anti-PEAV effects and significantly inhibited LD accumulation, downregulated the NF-κB signaling pathway, reduced the production of IL-1β and IL-8, and inhibited cell death. LD accumulation in the lipid metabolism pathway therefore plays an important role in the replication and pathogenesis of PEAV, and metformin hydrochloride inhibits LD accumulation and the inflammatory response to exert anti-PEAV activity and reducing pathological injury. These findings contribute new targets for developing treatments for PEAV infections.

Effect of droplet characteristics on liquid-phase distribution in spray zone of internal mixing air-mist nozzle

In continuous casting production,droplet characteristics are important parameters for evaluating the nozzle atomization quality,and have a significant impact on the secondary cooling effect and the slab quality.In order to study the behavior of atomized droplets after reaching the slab surface and to optimize the spray cooling effect,the influence of droplet diameter and droplet velocity on the migration behavior of droplets in the secondary cooling zone was analyzed by FLUENT software.Results show that the droplets in the spray zone and on the slab surface are mainly concentrated in the center,thus,the liquid volume fraction in the center is higher than that of either side.As the droplet diameter increases,the region of high liquid volume fraction on the slab surface becomes wider,and the liquid phase distribution in the slab width direction becomes uneven.Although increasing the droplet velocity at the nozzle exit has little effect on droplet diffusion in the spray zone,the distribution becomes more uneven due to more liquid reaches the slab surface per unit time.A prediction formula of the maximum water flow rate on the slab surface for specific droplet characteristics was proposed based on dimensionless analysis and validated by simulated data.A nozzle spacing of 210 mm was recommended under the working conditions in this study,which ensures effective coverage of the spray water over the slab surface and enhances the distribution uniformity of water flow rate in the transverse direction.

Production of Artificial Fog in the PAVIN Fog and Rain Platform: In Search of Big Droplets Fog

In fog, visibility is reduced. This reduction in visibility is measured by the meteorological optical range (MOR), which is important for studying human perception and various sensors in foggy conditions. The Cerema PAVIN Fog & Rain platform is capable of producing calibrated fog in order to better analyses it and understand its consequences. The problem is that the droplets produced by the platform are not large enough to resemble real fog. This can have a major impact on measurements since the interaction between electromagnetic waves and fog depends on the wavelength and diameter of the droplets. To remedy this, Cerema is building a new platform with new equipment capable of generating fog. This study analyses different nozzles and associated usage parameters such as the type of water used and the pressure used. The aim is to select the best nozzle with the associated parameters for producing large-diameter droplets and therefore more realistic fog.

BREAK-UP MECHANISM OF METAL DROPLETS GENERATED BY AN ELECTROHYDRODYNAMIC TECHNIQUE

Nanometer powders can be produced by an electrohydrodynamic technique. The breakup mechanism of the metal droplets generated by the electrohydrodynamic technique was analysed. It showed that the applied voltage, the electric field Btrength, the properties of the molten metal and the volumetric flow rate of the molten metal directly effect the breat-up extent of the metal droplets.

Experimental study on fusion and break-up motion after droplet collision

The interactions between droplets have an important influence on the atomization of liquid fuel,the combustion efficiency,and the reduction of particulate matter emissions for an engine.For this reason,this paper presents results from an experimental study on the coalescence and break-up of droplets after collision.According to the shape and parameters of the droplets at different times after the collision of the droplets was captured by a high speed camera,analysis was done for the following effects of droplet collisions:the collision-coalescence motion for the collision between the droplets,the change history of the dimensionless length-to-width ratio of the oscillation motion,the critical size ratio of the breakup motion,and the liquid physical properties of the particles.The results show that the droplets collide and exhibit two forms of coalescence oscillation and break-up:for oscillating motion,at higher droplet collision velocities and dimensionless size ratios,there will be a larger dimensionless length-to-width ratio for the droplet oscillation;for the break-up motion,at higher collision velocities,there will be lower dimensionless size ratios,and lower liquid surface tension,shorter times over which the droplet breaks,and facilitated droplet break-up.The research results presented here can be used for atomization in engine cylinder,increasing the gas/liquid contact area and enhancing the combustion efficiency of gas/liquid heat transfer to improve the combustion efficiency of the engine.

Numerical analysis of arc-droplet behavior in thin wire high current MAG welding with magnetic control

High efficiency welding has always been one of the hot research subjects at home and overseas. Aiming at the problem of unstable droplet rotating spray transfer process in 450 A thin wire metal active gas arc(MAG) welding, a three-dimensional arc-droplet coupled model is established in this paper on the base of fluid dynamics to conduct numerical analysis for droplet transfer behavior with external magnetic controlled MAG welding, and used high-speed camera system to verify the simulation results. The results indicate that without external magnetic field, the droplet is transferred by the way of rotating spray, the arc is changeable and the spatter is serious. The electromagnetic force accelerates the radial liquid beam rotation under direct current(DC) magnetic field, and increases the angle between liquid beam and welding wire axis. Meanwhile, the rotation frequency of the liquid beam reaches 400 Hz, the area of arc column and heat loss increase under DC magnetic field. Based on the alternating magnetic field, the arc is the “bell shaped”, the arc stiffness raises, its temperature achieves 26 000 K, and the maximum speed of the liquid stream beam can reach 500 m/s. And the droplet transfer is more stable, the spatter significantly reduces, and welding quality is effectively improved.

Regenerating gene 4 promotes chemoresistance of colorectal cancer by affecting lipid droplet synthesis and assembly

BACKGROUND Regenerating gene 4(REG4)has been proved to be carcinogenic in some cancers,but its manifestation and possible carcinogenic mechanisms in colorectal cancer(CRC)have not yet been elucidated.Our previous study found that the drug resistance of CRC cells may be closely linked to their fat metabolism.AIM To explore the role of REG4 in CRC and its association with lipid droplet formation and chemoresistance.METHODS We conducted a meta-analysis and bioinformatics and pathological analyses of REG4 expression in CRC.The effects of REG4 on the phenotypes and related protein expression were also investigated in CRC cells.We detected the impacts of REG4 on the chemoresistance and lipid droplet formation in CRC cells.Finally,we analyzed how REG4 regulated the transcription and proteasomal degradation of lipogenic enzymes in CRC cells.RESULTS Compared to normal mucosa,REG4 mRNA expression was high in CRC(P<0.05)but protein expression was low.An inverse correlation existed between lymph node and distant metastases,tumor-node-metastasis staging or short overall survival and REG4 mRNA overexpression(P<0.05),but vice versa for REG4 protein expression.REG4-related genes included:Chemokine activity;taste receptors;protein-DNA and DNA packing complexes;nucleosomes and chromatin;generation of second messenger molecules;programmed cell death signals;epigenetic regulation and DNA methylation;transcription repression and activation by DNA binding;insulin signaling pathway;sugar metabolism and transfer;and neurotransmitter receptors(P<0.05).REG4 exposure or overexpression promoted proliferation,antiapoptosis,migration,and invasion of DLD-1 cells in an autocrine or paracrine manner by activating the epidermal growth factor receptor-phosphoinositide 3-kinase-Akt-nuclear factor-κB pathway.REG4 was involved in chemoresistance not through de novo lipogenesis,but lipid droplet assembly.REG4 inhibited the transcription of acetyl-CoA carboxylase 1(ACC1)and ATP-citrate lyase(ACLY)by disassociating the complex formation of anti-acetyl(AC)-acetyl-histone 3-AC-histone 4-inhibitor of growth protein-5-si histone deacetylase;-sterol-regulatory element binding protein 1 in their promoters and induced proteasomal degradation of ACC1 or ACLY.CONCLUSION REG4 may be involved in chemoresistance through lipid droplet assembly.REG4 reduces expression of de novo lipid synthesis key enzymes by inhibiting transcription and promoting ubiquitination-mediated proteasomal degradation.

Effect of Velocity Ratio,Viscosity Ratio,Contact Angle,and Channel Size Ratio on Droplet Formation

This study uses a T-junction to examine the effects of different parameters(velocity ratio,viscosity,contact angle,and channel size ratio)on the generation of microdroplets,related rate,and size.More specifically,numerical simulations are exploited to investigate situations with a velocity varying from 0.004 to 1.6 m/s for the continuous phase and from 0.004 to 0.8 m/s for the dispersed phase,viscosity ratios(0.668,1,6.689,10,66.899),contact angle 80°<θ<270°and four different canal size ratios(1,1.5,2 and 4).The results show that canal size influences droplet size and the generation rate.The contact angle has an impact on the form and the quality of generated droplets.Moreover,the relationship between velocity and viscosity ratios,droplet size,and generation rate is non-monotonic.

Effect of Free-fall Nozzle Channel Dispersion Angle on TC4 Discontinuous Droplets Pre-breakup in EIGA

The effect of the inlet gas pressure,supplementary gas pressure and nozzle channel dispersion angle on the pre-breakup behavior of Ti-6Al-4V(TC4)discontinuous droplets during EIGA was investigated by combining numerical simulation with experiments.The results show that the axial velocity at the recirculation zone before the stagnation location was first increased and decreased then increased significantly after the peak value,while the pressure of the recirculation zone increased with the increase in inlet pressure.With the supplementary pressure increasing,the velocity magnitude and range of the recirculation zone gradually decreased.As the dispersion angle of the nozzle channel increased,the pre-breakup efficiency of droplets gradually decreased,but the adhesion phenomenon of droplets on the inner wall surface of the nozzle channel(IWSNC)gradually weakened.Under the inlet pressure of 4 MPa,a supplementary pressure of 0.05 MPa,and the dispersion angle of 15°,the uniform and spherical TC4 powders with diameter of 70μm were prepared,which was consistent with the simulation results.The optimized process parameters is a balance between the size of the pre-atomized particles and the back-spraying and bonding phenomenons of droplets.

Interaction of water droplets with pyrolyzing coal particles and tablets

The paper presents the experimental research findings for the patterns of collisions of water droplets with pressed tableted samples used as substrates and with small particles of a pyrolyzing solid fuel.Brown coal samples were used.Droplet-substrate interactions were studied when varying the droplet diameter in the range from 1 to 4 mm and velocity from 0.5 to 4 m/s.That corresponded to the Weber number range of 7-830.The coal tablet surface temperature was varied from 20 to 700℃.In the interactions of water droplets(0.7-1.5 mm in diameter,pre-collision velocity from 1 to 3 m/s)with coal particles(with a size of 0.2-1 mm,pre-collision velocity 0.7-2 m/s),the temperature of the latter was varied in the range of 330-480℃.The following regimes of the interaction of droplets with solid particles during chemical reactions and phase transformations were distinguished:spreading/agglomeration and break-up/separation.Differences in the characteristics of the interaction of water droplets with coal particles at varying temperatures were identified.Droplet-particle interaction regime maps for B(We),We(Oh)and We(Ca)were constructed.The collision regime boundaries were described using fitted curves that can be utilized to develop the existing mathematical models of droplet-particle collisions in gas.It was established that the gaseous volatile production in coal pyrolysis has a modest effect on the regimes and characteristics of the droplet destruction in the temperature range under consideration(20-700℃).