The electrohydrodynamic behaviors and evolution processes of silicone oil droplet in castor oil under uniform direct current(DC)electric field are visually observed based on a high-speed microscopic platform.Subsequen...The electrohydrodynamic behaviors and evolution processes of silicone oil droplet in castor oil under uniform direct current(DC)electric field are visually observed based on a high-speed microscopic platform.Subsequently,the effects of different working conditions,such as electric field strength,droplet size,etc.,on droplet behaviors are roundly discussed.It can be found that there are four droplet behavior modes,including Taylor deformation,typical oblique rotation,periodic oscillation,and fracture,which change with the increase of electric field strength.It is also demonstrated that the degree of flat ellipse deformation gets larger under a stronger electric field.Moreover,both of the stronger electric field and smaller droplet size lead to an increase in the rotation angle of the droplet.展开更多
The temperature field of FGH95 alloy droplet atomized by plasma rotatingelectrode processing (PREP) during solidification has been calculated through numerical analysisbased on equivalent sensible heat capacity method...The temperature field of FGH95 alloy droplet atomized by plasma rotatingelectrode processing (PREP) during solidification has been calculated through numerical analysisbased on equivalent sensible heat capacity method. And thus the relational curves among temperaturegradient of solid-liquid interface, moving velocity of solid-liquid interface and solid fractionduring solidification have been presented. The results indicate that the relation between averagetemperature gradient of solid-liquid interface and droplet size, and the relation between averagemoving velocity of solid-liquid interface and droplet size can be expressed during solidification.展开更多
The regular distribution of micro-droplets splitting from thin ferrofluid layer is systematic experimentally investigated, as the layer is placed in a vertical magnetic field. In this work, the field is applied in an ...The regular distribution of micro-droplets splitting from thin ferrofluid layer is systematic experimentally investigated, as the layer is placed in a vertical magnetic field. In this work, the field is applied in an instant manner and a slow manner, respectively; the field strength is linear increased. With instantly raising the field, it is observed that the ferrofluid layer is split into several regularly distributed micro-droplets, and that the number of micro-droplets is linear to the magnetic field strength and the thickness of the liquid layers. When the field is slowly increased, a liquid ring together with several micro-droplets appears from the ferrofluid layer splitting. A spatial drift of the micro-droplets is also observed in the process of increasing the magnetic field. Our results are useful for manipulating the splitting regularities of ferrofluid layers by magnetic field, which may be used in non-contact segmentation, and magnetically manipulated drug carriers for targeting the therapy, etc.展开更多
The infrared camera is used to investigate the temperature field of gas metal arc welding. The results show that the temperature distribution of weld pool and adjacent area appears cone shape. A new heat source model ...The infrared camera is used to investigate the temperature field of gas metal arc welding. The results show that the temperature distribution of weld pool and adjacent area appears cone shape. A new heat source model combined by Gaussian distribution heat source of the arc and conical distribution heat source of the droplet is set up based on the experimental results, and with the combined boundary conditions, the temperature field of gas metal arc welding is simulated using finite element method. According to the comparison between the results of experiment and simulation in temperature field shows that the new combined heat source model is more accurate and effective than the Gauss heat source model.展开更多
The mechanism of microdroplet coalescence is a fundamental issue for droplet-based microfluidics. We developed an asymmetric expansion (a rectangular groove) along one side of a microchannel to achieve multiple-microd...The mechanism of microdroplet coalescence is a fundamental issue for droplet-based microfluidics. We developed an asymmetric expansion (a rectangular groove) along one side of a microchannel to achieve multiple-microdroplet trapping, collision, and coalescence. Compared with reported symmetric expansions, this asymmetric groove could easily trap microdroplets and control two or three microdroplet coalescences precisely without a requirement for temporal and spatial synchronization. To reveal the mechanisms of multiple-droplet coalescences in a groove, we observed five different coalescence patterns under different flow conditions. Moreover, we characterized the flow behavior quantitatively by simulating the velocity vector fields in both the microdroplets and continuous phase, finding good agreement with experiments. Finally, a map of coalescence forms with different capillary numbers () and flow ratios () was obtained. The results could provide a useful guidance for the design and application of droplet-based microfluidic devices.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51725602 and 51906039)the Natural Science Foundation of Jiangsu Province,China(Grant No.BK20180405)。
文摘The electrohydrodynamic behaviors and evolution processes of silicone oil droplet in castor oil under uniform direct current(DC)electric field are visually observed based on a high-speed microscopic platform.Subsequently,the effects of different working conditions,such as electric field strength,droplet size,etc.,on droplet behaviors are roundly discussed.It can be found that there are four droplet behavior modes,including Taylor deformation,typical oblique rotation,periodic oscillation,and fracture,which change with the increase of electric field strength.It is also demonstrated that the degree of flat ellipse deformation gets larger under a stronger electric field.Moreover,both of the stronger electric field and smaller droplet size lead to an increase in the rotation angle of the droplet.
基金This word was financially supported by the National Program Committee of China(No.95-YJ-20).]
文摘The temperature field of FGH95 alloy droplet atomized by plasma rotatingelectrode processing (PREP) during solidification has been calculated through numerical analysisbased on equivalent sensible heat capacity method. And thus the relational curves among temperaturegradient of solid-liquid interface, moving velocity of solid-liquid interface and solid fractionduring solidification have been presented. The results indicate that the relation between averagetemperature gradient of solid-liquid interface and droplet size, and the relation between averagemoving velocity of solid-liquid interface and droplet size can be expressed during solidification.
基金Funded by the National Natural Science Foundation of China(No.51077006)
文摘The regular distribution of micro-droplets splitting from thin ferrofluid layer is systematic experimentally investigated, as the layer is placed in a vertical magnetic field. In this work, the field is applied in an instant manner and a slow manner, respectively; the field strength is linear increased. With instantly raising the field, it is observed that the ferrofluid layer is split into several regularly distributed micro-droplets, and that the number of micro-droplets is linear to the magnetic field strength and the thickness of the liquid layers. When the field is slowly increased, a liquid ring together with several micro-droplets appears from the ferrofluid layer splitting. A spatial drift of the micro-droplets is also observed in the process of increasing the magnetic field. Our results are useful for manipulating the splitting regularities of ferrofluid layers by magnetic field, which may be used in non-contact segmentation, and magnetically manipulated drug carriers for targeting the therapy, etc.
文摘The infrared camera is used to investigate the temperature field of gas metal arc welding. The results show that the temperature distribution of weld pool and adjacent area appears cone shape. A new heat source model combined by Gaussian distribution heat source of the arc and conical distribution heat source of the droplet is set up based on the experimental results, and with the combined boundary conditions, the temperature field of gas metal arc welding is simulated using finite element method. According to the comparison between the results of experiment and simulation in temperature field shows that the new combined heat source model is more accurate and effective than the Gauss heat source model.
基金supported by the Beijing Municipal Natural Science Foundation (Grant 7152012)the General Program of Science and Technology Development Project of the Beijing Municipal Education Commission (Grant KM201610005002)+2 种基金the National Natural Science Foundation of China (Grant 11572013)the China Scholarship Council (Grant 201406545031)the Training Plan of New Talent of Beijing University of Technology (Grant 2015-RX-L02)
文摘The mechanism of microdroplet coalescence is a fundamental issue for droplet-based microfluidics. We developed an asymmetric expansion (a rectangular groove) along one side of a microchannel to achieve multiple-microdroplet trapping, collision, and coalescence. Compared with reported symmetric expansions, this asymmetric groove could easily trap microdroplets and control two or three microdroplet coalescences precisely without a requirement for temporal and spatial synchronization. To reveal the mechanisms of multiple-droplet coalescences in a groove, we observed five different coalescence patterns under different flow conditions. Moreover, we characterized the flow behavior quantitatively by simulating the velocity vector fields in both the microdroplets and continuous phase, finding good agreement with experiments. Finally, a map of coalescence forms with different capillary numbers () and flow ratios () was obtained. The results could provide a useful guidance for the design and application of droplet-based microfluidic devices.
