Machine learning-driven optimization of plasma-catalytic dry reforming of methane

This study investigates the dry reformation of methane(DRM)over Ni/Al_(2)O_(3)catalysts in a dielectric barrier discharge(DBD)non-thermal plasma reactor.A novel hybrid machine learning(ML)model is developed to optimize the plasma-catalytic DRM reaction with limited experimental data.To address the non-linear and complex nature of the plasma-catalytic DRM process,the hybrid ML model integrates three well-established algorithms:regression trees,support vector regression,and artificial neural networks.A genetic algorithm(GA)is then used to optimize the hyperparameters of each algorithm within the hybrid ML model.The ML model achieved excellent agreement with the experimental data,demonstrating its efficacy in accurately predicting and optimizing the DRM process.The model was subsequently used to investigate the impact of various operating parameters on the plasma-catalytic DRM performance.We found that the optimal discharge power(20 W),CO_(2)/CH_(4)molar ratio(1.5),and Ni loading(7.8 wt%)resulted in the maximum energy yield at a total flow rate of∼51 mL/min.Furthermore,we investigated the relative significance of each operating parameter on the performance of the plasma-catalytic DRM process.The results show that the total flow rate had the greatest influence on the conversion,with a significance exceeding 35%for each output,while the Ni loading had the least impact on the overall reaction performance.This hybrid model demonstrates a remarkable ability to extract valuable insights from limited datasets,enabling the development and optimization of more efficient and selective plasma-catalytic chemical processes.

Regulating crystal phase of TiO_(2) to enhance catalytic activity of Ni/TiO_(2) for solar-driven dry reforming of methane

Ni/TiO_(2) catalyst is widely employed for photo-driven DRM reaction while the influence of crystal structure of TiO_(2) remains unclear.In this work,the rutile/anatase ratio in supports was successfully controlled by varying the calcination temperature of anatase-TiO_(2).Structural characterizations revealed that a distinct TiO_(x) coating on the Ni nanoparticles(NPs)was evident for Ni/TiO_(2)-700 catalyst due to strong metal-support interaction.It is observed that the TiOx overlayer gradually disappeared as the ratio of rutile/anatase increased,thereby enhancing the exposure of Ni active sites.The exposed Ni sites enhanced visible light absorption and boosted the dissociation capability of CH4,which led to the much elevated catalytic activity for Ni/TiO_(2)-950 in which rutile dominated.Therefore,the catalytic activity of solar-driven DRM reaction was significantly influenced by the rutile/anatase ratio.Ni/TiO_(2)-950,characterized by a predominant rutile phase,exhibited the highest DRM reactivity,with remarkable H_(2) and CO production rates reaching as high as 87.4 and 220.2 mmol/(g·h),respectively.These rates were approximately 257 and 130 times higher,respectively,compared to those obtained on Ni/TiO_(2)-700 with anatase.This study suggests that the optimization of crystal structure of TiO_(2) support can effectively enhance the performance of photothermal DRM reaction.

Asymmetric Drying and Wetting Trends in Eastern and Western China

As an important factor that directly affects agricultural production, the social economy, and policy implementation,observed changes in dry/wet conditions have become a matter of widespread concern. However, previous research has mainly focused on the long-term linear changes of dry/wet conditions, while the detection and evolution of the non-linear trends related to dry/wet changes have received less attention. The non-linear trends of the annual aridity index, obtained by the Ensemble Empirical Mode Decomposition(EEMD) method, reveal that changes in dry/wet conditions in China are asymmetric and can be characterized by contrasting features in both time and space in China. Spatially, most areas in western China have experienced transitions from drying to wetting, while opposite changes have occurred in most areas of eastern China. Temporally, the transitions occurred earlier in western China compared to eastern China. Research into the asymmetric spatial characteristics of dry/wet conditions compensates for the inadequacies of previous studies, which focused solely on temporal evolution;at the same time, it remedies the inadequacies of traditional research on linear trends over centennial timescales. Analyzing the non-linear trend also provides for a more comprehensive understanding of the drying/wetting changes in China.

Anthropogenic Influence on Decadal Changes in Concurrent Hot and Dry Events over China around the Mid-1990s

The frequency and duration of observed concurrent hot and dry events(HDEs) over China during the growing season(April–September) exhibit significant decadal changes across the mid-1990s. These changes are characterized by increases in HDE frequency and duration over most of China, with relatively large increases over southeastern China(SEC), northern China(NC), and northeastern China(NEC). The frequency of HDEs averaged over China in the present day(PD,1994–2011) is double that in the early period(EP, 1964–81);the duration of HDEs increases by 60%. Climate experiments with the Met Office Unified Model(MetUM-GOML2) are used to estimate the contributions of anthropogenic forcing to HDE decadal changes over China. Anthropogenic forcing changes can explain 60%–70% of the observed decadal changes,suggesting an important anthropogenic influence on HDE changes over China across the mid-1990s. Single-forcing experiments indicate that the increase in greenhouse gas(GHG) concentrations dominates the simulated decadal changes,increasing the frequency and duration of HDEs throughout China. The change in anthropogenic aerosol(AA) emissions significantly decreases the frequency and duration of HDEs over SEC and NC, but the magnitude of the decrease is much smaller than the increase induced by GHGs. The changes in HDEs in response to anthropogenic forcing are mainly due to the response of climatological mean surface air temperatures. The contributions from changes in variability and changes in climatological mean soil moisture and evapotranspiration are relatively small. The physical processes associated with the response of HDEs to GHG and AA changes are also revealed.

Effect of different drying methods on the amino acids,α-dicarbonyls and volatile compounds of rape bee pollen

The significant demand for high quality food has motivated us to adopt appropriate processing methods to improve the food nutritional quality and flavors.In this study,the effects of five drying methods,namely,pulsed vacuum drying(PVD),freeze drying(FD),infrared drying(IRD),hot-air drying(HAD)and sun drying(SD)on free amino acids(FAAs),α-dicarbonyl compounds(α-DCs)and volatile compounds(VOCs)in rape bee pollen(RBP)were determined.The results showed that FD significantly released the essential amino acids(EAAs)compared with fresh samples while SD caused the highest loss.Glucosone was the dominantα-DCs in RBP and the highest loss was observed after PVD.Aldehydes were the dominant volatiles of RBP and SD samples contained more new volatile substances(especially aldehydes)than the other four drying methods.Comprehensively,FD and PVD would be potential methods to effectively reduce the quality deterioration of RBP in the drying process.

Infuences of Different Admixtures on the Drying Shrinkage Characteristics of Metakaolin-based Geopolymer Mortar

To investigate the influences of different admixtures on the drying shrinkage of polymer mortar in a metakaolin base,the experiments of VAE(vinyl acetate ethylene copolymer),APAM(anionic polyacrylamide)and CPAM(cationic polyacrylamide)on the drying shrinkage properties of geopolymer mortar were designed under normal temperature curing conditions.An SP-175 mortar shrinkage dilatometer was introduced to measure the dry shrinkage of geopolymer mortar.Meanwhile,the drying shrinkage properties of geopolymer mortar are exhibited by the parameters of water loss rate,drying shrinkage rate,drying shrinkage strain and drying shrinkage coefficient.The experimental data are further fitted to obtain the prediction model of dry shrinkage of geopolymer mortar,which can better reflect the relationship between dry shrinkage rate and time.Finally,the experimental results demonstrate that the dry shrinkage of geopolymer mortar can be significantly increased by adding 4%VAE admixture,meanwhile under the condition that the polymer film formed by VAE reaction can strengthen and toughen the mortar.2.5%APAM admixture and 1.5%CPAM admixture can enhance the dry shrinkage performance of geopolymer mortar in a certain range.

Improving Semi-Dried Brown Rice Noodle Quality via Mixed Fermentation of Lactobacillus and Yeast

To address the coarse texture and poor cooking quality of brown rice flour,we employed fermentation using lactobacillus and yeast in varying proportions.The fermented flour from early indica rice Pear 13 was then processed into semi-dried brown rice noodles.

Psychometric validation of the Chinese version of the dry eye-related quality-of-life score questionnaire

AIM:To psychometrically validate the Chinese version of the dry eye-related quality-of-life score questionnaire(DEQSCHN)among Chinese patients with dry eye.METHODS:This study involved 231 participants,including 191 with dry eye disease(DED)comprising the dry eye disease group,and 40 healthy participants forming the control group.Participants were required to complete the DEQS-CHN,and Chinese dry eye questionnaire and undergo clinical tests including the fluorescein breakup time(FBUT),corneal fluorescein staining(CFS),and Schirmer I test.To assess the internal consistency and retest reliability,Cronbach’sαand the intraclass correlation coefficient(ICC)were employed.Content validity was assessed by item-level content validity index(ICV)and an average scale-level content validity index(S-CVI/Ave).Construct validity was assessed by confirmatory factor analysis.The concurrent validity was assessed by calculating correlations between DEQS-CHN and Chinese dry eye questionnaire.Discriminative validity was evaluated through nonparametric tests,with receiver operating characteristic(ROC)curve serving as conclusive indicators of the questionnaire’s distinguishing capability.RESULTS:The Cronbach’sαcoefficients for frequency and degree of ocular symptoms,impact on daily life,and summary score were 0.736,0.704,0.811,0.818,0.861,and 0.860,respectively,and the ICC were 0.611,0.677,0.715,0.769,0.711,and 0.779,respectively.All I-CVI scores ranged from 0.833 to 1.000,with an S-CVI/Ave of 0.956.Confirmatory factor analysis results exhibited a wellfitting model consistent with the original questionnaire[χ^(2)/df=2.653,incremental fit index(IFI)=0.924,comparative fit index(CFI)=0.924,Tucker-Lewis index(TLI)=0.909,and root mean square error of approximation(RMSEA)=0.065].There was a moderate positive correlation between the DEQS-CHN and the Chinese dry eye questionnaire(r^(2)=0.588).The dry eye group demonstrated significantly higher scores compared to the control group,and the area under the curve(AUC)value was 0.8092.CONCLUSION:The DEQS-CHN has been demonstrated as a valid and reliable instrument for assessing the impact of dry eye disease on the quality of life among Chinese individuals with DED.

A Comprehensive Review of Design and Technological Advancements across Various Types of Solar Dryers

This analysis investigates the widespread use of solar drying methods and designs in developing countries,particularly for agricultural products like fruits,vegetables,and bee pollen.Traditional techniques like hot air oven drying and open sun drying have drawbacks,including nutrient loss and exposure to harmful particles.Solar and thermal drying are viewed as sustainable solutions because they rely on renewable resources.The article highlights the advantages of solar drying,including waste reduction,increased productivity,and improved pricing.It is also cost-effective and energy-efficient.The review study provides an overview of different solar drying systems and technologies used in poor nations,aiming to identify the most effective and efficient designs.The focus is on comparing current models of solar dryers for optimal performance.The review underscores the importance of solar drying as a long-term,eco-friendly approach to drying food in developing countries.This review aims to evaluate how using solar-powered drying techniques can enhance food preservation,minimize waste,and enhance the quality and marketability of agricultural goods.The paper will specifically focus on examining the efficacy of these methods for drying bee pollen and pinpointing where enhancements can be made in their advancement.

Different concentrations of hyaluronic acid eye drops for dry eye syndrome: a systematic review and Meta-analysis

AIM:To compare high or low concentration of hyaluronic acid eye drops(HY)for dry eye syndromes(DES).METHODS:Randomized controlled trials(RCTs)comparing various concentrations of HY were searched in PubMed,Embase,Web of Science,Cochrane,SinoMed,CNKI,Wanfang Database,CQVIP,and Chinese journals databases between inception and July 2023.Pooled standardized mean differences(SMD)or weighted mean difference(WMD)with 95%confidence intervals(CI)from RCTs evaluating Schirmer’s I test(SIT),corneal fluorescein staining score(CFS),tear breakup time(TBUT),DES score(DESS),and Ocular Surface Disease Index(OSDI)were calculated.Sensitivity analysis,Egger’s test and Meta-regression analysis were performed for all indicators.RESULTS:We conducted a Meta-analysis of 10 RCTs that met the inclusion criteria,involving 1796 cases.High-concentrations group significantly improved the outcome of CFS according to random effects modelling(SMD,-3.37;95%CI,-5.25 to-1.48;P=0.0005).The rest of the results were not statistically significant,including indicators such as SIT,TBUT,DESS and OSDI.CONCLUSION:For dry eyes with positive corneal staining,a high concentration of HY is recommended,whereas in other cases,a high concentration of HY does not offer a more pronounced advantage over a low concentration of HY in the treatment of dry eyes.

Theoretical optimization of micropillar arrays for structurally stable bioinspired dry adhesives

Inspired by the excellent adhesion performances of setae structure from organisms,micro/nano-pillar array has become one of the paradigms for adhesive surfaces.The micropillar arrays are composed of the resin pillars for adhesion and the substrate with different elastic modulus for supporting.The stress singularity at the bi-material corner between the pillars and the substrate can induce the failure of the micropillar-substrate corner and further hinder the fabrication and application of micropillar arrays,yet the design for the stability of the micropillar array lacks systematical and quantitative guides.In this work,we develop a semi-analytical method to provide the full expressions for the stress distribution within the bi-material corner combining analytical derivations and numerical calculations.The predictions for the stress within the singularity field can be obtained based on the full expressions of the stress.The good agreement between the predictions and the FEM results demonstrates the high reliability of our method.By adopting the strain energy density factor approach,the stability of the pillar-substrate corner is assessed by predicting the failure at the corner.For the elastic mismatch between the pillar and substrate given in this paper,the stability can be improved by increasing the ratio of the shear modulus of the substrate to that of the micropillar.Our study provides accurate predictions for the stress distribution at the bi-material corner and can guide the optimization of material combinations of the pillars and the substrate for more stable bioinspired dry adhesives.

Validation of a Characteristics Dimensions for Transfers during Convective Drying of Sweet Potato Cubic, Cylindrical and Spherical Shapes

This present work solves the problem of initial shape influence on transfer during convective drying. A characteristic dimension is found for the cubic, cylindrical and spherical-shaped samples of the sweet potato. This characteristic dimension corresponds to the diameter D for the sphere, to the edge a for the cube and the diameter = height D = H for the cylinder. Unlike the sphere where this characteristic dimension is perfect, the cubic and cylindrical shapes have space factors which are, among other things, angles and borders. By fixing the same characteristic dimensions, we end up with overlapping curves, showing identical and uniform transfers.

Decadal Changes in Dry and Wet Heatwaves in Eastern China:Spatial Patterns and Risk Assessment

Under global warming,understanding the long-term variation in different types of heatwaves is vital for China’s preparedness against escalating heat stress.This study investigates dry and wet heatwave shifts in eastern China over recent decades.Spatial trend analysis displays pronounced warming in inland midlatitudes and the Yangtze River Valley,with increased humidity in coastal regions.EOF results indicate intensifying dry heatwaves in northern China,while the Yangtze River Valley sees more frequent dry heatwaves.On the other hand,Indochina and regions north of 25°N also experience intensified wet heatwaves,corresponding to regional humidity increases.Composite analysis is conducted based on different situations:strong,frequent dry or wet heatwaves.Strong dry heatwaves are influenced by anticyclonic circulations over northern China,accompanied by warming SST anomalies around the coastal midlatitudes of the western North Pacific(WNP).Frequent dry heatwaves are related to strong subsidence along with a strengthened subtropical high over the WNP.Strong and frequent wet heatwaves show an intensified Okhotsk high at higher latitudes in the lower troposphere,and a negative circumglobal teleconnection wave train pattern in the upper troposphere.Decaying El Niño SST patterns are observed in two kinds of wet heatwave and frequent dry heatwave years.Risk analysis indicates that El Niño events heighten the likelihood of these heatwaves in regions most at risk.As global warming continues,adapting and implementing mitigation strategies toward extreme heatwaves becomes crucial,especially for the aforementioned regions under significant heat stress.

Influencing factors of self-management ability among dry eye patients in west China

AIM:To investigate the current situation and influencing factors of self-management ability in dry eye patients in west China.METHODS:A total of 265 patients clinically diagnosed with dry eye received a convenience survey questionnaire at West China Hospital of Sichuan University.All participants completed the rating scale of health self-management skill for adults(AHSMSRS),Huaxi Emotional-Distress Index(HEI),e-health literacy scale(e-HEALS)and Brief Illness Perception Questionnaire(Brief-IPQ).A generalized linear model was employed to establish a multivariate linear model with demographic data,psychological state,e-HEALS,and illness perception as independent variables and health selfmanagement skill score as the dependent variable.RESULTS:The mean score for health self-management skill was 165.58±15.79.Multivariate analysis revealed that advanced age,better illness perception and improved psychological state were associated with better health selfmanagement ability among dry eye patients.Furthermore,the health self-management ability of patients with a disease duration less than 1y was found to be higher compared to those with a disease duration exceeding 1y.CONCLUSION:The health self-management ability of dry eye patients in west China is relatively high.Age,duration of disease,illness perception and psychological state are the influencing factors on the health selfmanagement ability of dry eye patients.

Wearable multilead ECG sensing systems using on-skin stretchable and breathable dry adhesives

Electrocardiogram(ECG)monitoring is used to diagnose cardiovascular diseases,for which wearable electronics have attracted much attention due to their lightweight,comfort,and long-term use.This study developed a wearablemultilead ECG sensing system with on-skin stretchable and conductive silver(Ag)-coated fiber/silicone(AgCF-S)dry adhesives.Tangential and normal adhesion to pigskin(0.43 and 0.20 N/cm2,respectively)was optimized by the active control of fiber density and mixing ratio,resulting in close contact in the electrode–skin interface.The breathableAgCF-S dry electrodewas nonallergenic after continuous fit for 24 h and can be reused/cleaned(>100 times)without loss of adhesion.The AgCF encapsulated inside silicone elastomers was overlapped to construct a dynamic network under repeated stretching(10%strain)and bending(90°)deformations,enabling small intrinsic impedance(0.3,0.1 Hz)and contact impedance variation(0.7 k)in high-frequency vibration(70 Hz).All hard/soft modules of the multilead ECG system were integrated into lightweight clothing and equipped with wireless transmission for signal visualization.By synchronous acquisition of I–III,aVR,aVL,aVF,and V4 lead data,the multilead ECG sensing system was suitable for various scenarios,such as exercise,rest,and sleep,with extremely high signal-to-noise ratios.

On dry machining of AZ31B magnesium alloy using textured cutting tool inserts

Magnesium alloys have many advantages as lightweight materials for engineering applications,especially in the fields of automotive and aerospace.They undergo extensive cutting or machining while making products out of them.Dry cutting,a sustainable machining method,causes more friction and adhesion at the tool-chip interface.One of the promising solutions to this problem is cutting tool surface texturing,which can reduce tool wear and friction in dry cutting and improve machining performance.This paper aims to investigate the impact of dimple textures(made on the flank face of cutting inserts)on tool wear and chip morphology in the dry machining of AZ31B magnesium alloy.The results show that the cutting speed was the most significant factor affecting tool flank wear,followed by feed rate and cutting depth.The tool wear mechanism was examined using scanning electron microscope(SEM)images and energy dispersive X-ray spectroscopy(EDS)analysis reports,which showed that at low cutting speed,the main wear mechanism was abrasion,while at high speed,it was adhesion.The chips are discontinuous at low cutting speeds,while continuous at high cutting speeds.The dimple textured flank face cutting tools facilitate the dry machining of AZ31B magnesium alloy and contribute to ecological benefits.

Co-inoculation of Debaryomyces hansenii and lactic acid bacteria: a strategy to improve the taste and odour profiles of dry sausages

The effects of the co-inoculation of Debaryomyces hansenii separately with 3 lactic acid bacteria(LAB),Lactobacillus sakei,Lactobacillus plantarum and Lactobacillus curvatus,on the taste and odour profi les of dry sausages were investigated.The co-inoculated sausages showed higher free amino acid and organic acid contents than the non-inoculated control and sausages inoculated with D.hansenii alone.Meanwhile,the sausages inoculated with D.hansenii+L.plantarum,D.hansenii+L.sakei and D.hansenii+L.curvatus had the highest contents of aldehydes,esters and alcohols,respectively.The results of electronic tongue,electronic nose and sensory evaluation demonstrated that compared with the sausage inoculated with D.hansenii,the sour taste and fl oral odour increased and the fatty odour decreased in the sausage inoculated with D.hansenii+L.sakei;this was more favourable for the development of a desirable fl avour in sausages.Moreover,the partial least squares regression analysis indicated that 10 taste and 33 odour compounds were mainly responsible for the differences in the flavour profiles among the sausages.Overall,these findings contributed to a more comprehensive understanding of the formation of sensory characteristics in dry sausages co-inoculated with yeast and LAB.

Dry Breeding and Dry Planting Techniques for Indica Hybrid Rice in Karst Mountain Areas of Gejiu City

Based on the arable land situation in Gejiu City,upland dry planting of indica hybrid rice is being expanded in Karst mountain areas with a rainfall of over 1400 mm and an altitude of 1100-1600 m to develop grain production.This paper gives a specific description of hybrid rice upland dry seedling technology,upland transplanting technology,fertilization technology,field management,weed prevention and control technology,and disease and pest control.

Influencing factors of ocular pain in dry eye disease patients at high altitude

AIM:To quantify the severity and frequency of ocular pain in Tibetan plateau patients with dry eye,and to evaluate the related factors affecting ocular pain.METHODS:A retrospective study included 160 cases of dry eye disease(DED)patients who were treated from July 2022 to June 2023.Age,gender,occupation,illness course,anxiety,plateau duration,plateau protection,ocular surface disease index scale(OSDI),break-up time(BUT),Schirmer I test(SIT),conjunctivitis,history of ophthalmic medication,autoimmune disease,the workload of daily near vision range,smoking and overnight stay were obtained via comprehensive ophthalmic assessment,and their duration was followed up.Logistic regression analysis was used to determine the related factors affecting ocular pain.RESULTS:Totally 77.5%(124/160)of DED patients had ocular pain,of which the severity of ocular pain was mild,moderate,and severe in 30.0%,36.3%,and 11.3%of patients,respectively.Frequency of ocular pain was reported occasional,half the time,frequent,and persistent pain in 19.4%,36.9%,16.9%,and 4.4%.OSDI score was 19.67±5.70(13 to 36),and the level of pain was lowly correlated with OSDI(rs=0.316,P<0.001).Logistic regression showed that in plateau DED patients,increased anxiety led to increased severity and frequency of ocular pain[odds ratio(OR)=3.662,5.613,2.387,and 4.870;all P<0.05],professional eye protection and improvement of daily sleep quantity decreased pain(OR=0.307,0.572,0.418,and 0.789;all P<0.05),while smoking and general protection of plateau did not affect the severity and frequency of ocular pain(all P>0.05).CONCLUSION:Ocular pain is a common complaint in high-altitude DED patients during the pandemic.Anxiety,eye protection,and adequate sleep during the epidemic period are significantly associated with the severity and frequency of ocular pain in patients with plateau DED,while symptoms of DED have relatively little influence on them.

Temperature dependence of mechanical properties and damage evolution of hot dry rocks under rapid cooling

Understanding the differences in mechanical properties and damage characteristics of granitoid under high temperatures is crucial for exploring deep geothermal resources.This study analyzes the evolution of the acoustic emission(AE)characteristics and mechanical parameters of granodiorite and granite after heating and water cooling by uniaxial compression and variable-angle shear tests under different temperature gradients.We identify their changes in mesostructure and mineral composition with electron probe microanalysis and scanning electron microscopy.Results show that these two hot dry rocks have similar diagenetic minerals and microstructure,but show significantly different mechanical and acoustic characteristics,and even opposing evolution trends in a certain temperature range.At the temperatures ranging from 100℃to 500℃,the compressive and shear mechanical properties of granodiorite switch repeatedly between weakening and strengthening,and those of granite show a continuous weakening trend.At 600℃,both rocks exhibit a deterioration of mechanical properties.The damage mode of granite is characterized by initiating at low stress,exponential evolutionary activity,and intensified energy release.In contrast,granodiorite exhibits the characteristics of initiating at high stress,volatile evolutionary activity,and intermittent energy release,due to its more stable microstructure and fewer thermal defects compared to granite.As the temperature increases,the initiation and propagation of secondary cracks in granodiorite are suppressed to a certain extent,and the seismicity and brittleness are enhanced.The subtle differences in grain size,microscopic heterogeneity,and mineral composition of the two hot dry rocks determine the different acoustic-mechanical characteristics under heating and cooling,and the evolution trends with temperature.These findings are of great significance for the scientific and efficient construction of rock mass engineering by rationally utilizing different rock strata properties.