Scale effect removal and range migration correction for hypersonic target coherent detection

The detection of hypersonic targets usually confronts range migration(RM)issue before coherent integration(CI).The traditional methods aiming at correcting RM to obtain CI mainly considers the narrow-band radar condition.However,with the increasing requirement of far-range detection,the time bandwidth product,which is corresponding to radar’s mean power,should be promoted in actual application.Thus,the echo signal generates the scale effect(SE)at large time bandwidth product situation,influencing the intra and inter pulse integration performance.To eliminate SE and correct RM,this paper proposes an effective algorithm,i.e.,scaled location rotation transform(ScLRT).The ScLRT can remove SE to obtain the matching pulse compression(PC)as well as correct RM to complete CI via the location rotation transform,being implemented by seeking the actual rotation angle.Compared to the traditional coherent detection algorithms,Sc LRT can address the SE problem to achieve better detection/estimation capabilities.At last,this paper gives several simulations to assess the viability of ScLRT.

Automatic fovea detection and choroid segmentation for choroidal thickness assessment in optical coherence tomography

AIM:To develop an automated model for subfoveal choroidal thickness(SFCT)detection in optical coherence tomography(OCT)images,addressing manual fovea location and choroidal contour challenges.METHODS:Two procedures were proposed:defining the fovea and segmenting the choroid.Fovea localization from B-scan OCT image sequence with three-dimensional reconstruction(LocBscan-3D)predicted fovea location using central foveal depression features,and fovea localization from two-dimensional en-face OCT(LocEN-2D)used a mask region-based convolutional neural network(Mask R-CNN)model for optic disc detection,and determined the fovea location based on optic disc relative position.Choroid segmentation also employed Mask R-CNN.RESULTS:For 53 eyes in 28 healthy subjects,LocBscan-3D’s mean difference between manual and predicted fovea locations was 170.0μm,LocEN-2D yielded 675.9μm.LocEN-2D performed better in non-high myopia group(P=0.02).SFCT measurements from Mask R-CNN aligned with manual values.CONCLUSION:Our models accurately predict SFCT in OCT images.LocBscan-3D excels in precise fovea localization even with high myopia.LocEN-2D shows high detection rates but lower accuracy especially in the high myopia group.Combining both models offers a robust SFCT assessment approach,promising efficiency and accuracy for large-scale studies and clinical use.

Coherent change detection of fine traces based on multi-angle SAR observations

Coherent change detection(CCD) is an effective method to detect subtle scene changes that occur between temporal synthetic aperture radar(SAR) observations. Most coherence estimators are obtained from a Hermitian product based on local statistics. Increasing the number of samples in the local window can improve the estimation bias, but cause the loss of the estimated images spatial resolution. The limitations of these estimators lead to unclear contour of the disturbed region, and even the omission of fine change targets. In this paper, a CCD approach is proposed to detect fine scene changes from multi-temporal and multi-angle SAR image pairs. Multi-angle CCD estimator can improve the contrast between the change target and the background clutter by jointly accumulating singleangle alternative estimator results without further loss of image resolution. The sensitivity of detection performance to image quantity and angle interval is analyzed. Theoretical analysis and experimental results verify the performance of the proposed algorithm.

Digital coherent detection research on Brillouin optical time domain reflectometry with simplex pulse codes

The digital coherent detection technique has been investigated without any frequency-scanning device in the Brillouin optical time domain reflectometry （BOTDR）, where the simplex pulse codes are applied in the sensing system. The time domain signal of every code sequence is collected by the data acquisition card （DAQ）. A shift-averaging technique is applied in the frequency domain for the reason that the local oscillator （LO） in the coherent detection is fix-frequency deviated from the primary source. With the 31-bit simplex code, the signal-to-noise ratio （SNR） has 3.5-dB enhancement with the same single pulse traces, accordant with the theoretical analysis. The frequency fluctuation for simplex codes is 14.01 MHz less than that for a single pulse as to 4-m spatial resolution. The results are believed to be beneficial for the BOTDR performance improvement.

Terahertz coherent detection via two-color laser pulses of various frequency ratios

The mechanism of terahertz(THz) pulse coherent detection via two-color laser pulses of various frequency ratios in gas plasma is theoretically investigated.Our investigations demonstrate that except for the commonly used frequency ratio of 2, other uncommon frequency ratios can also be utilized to detect THz pulse, such as 2 n, n + 1/2(n ≤ 3, n is a positive integer).The well-developed transient photocurrent model is extended to our terahertz detection process.Based on this model, our simulation results can be explained by analyzing the process of asymmetric electron ionization and electron acceleration.

Frequency response range of terahertz pulse coherent detection based on THz-induced time-resolved luminescence quenching

It has been proposed previously that the coherent detection of a terahertz（THz） pulse can be achieved based on the time-resolved luminescence quenching. In this paper, we investigate the frequency response range of this novel detection technology by simulating the motion of carriers in gallium arsenide（GaAs） by the ensemble Monte Carlo method. At room temperature, for a direct-current（DC） voltage of 20 kV/cm applied to the semiconductor（GaAs） and sampling time o140 fs, the luminescence quenching phenomena induced by terahertz pulses with different center frequencies are studied The results show that the quenching efficiency is independent of the THz frequency when the frequency is in a range o0.1 THz–4 THz. However, when the frequency exceeds 4 THz, the efficiency decreases with the increase of frequency Therefore, the frequency response range is 0.1 THz–4 THz. Moreover, when the sampling time is changed to 100 fs the frequency response range is extended to be approximately 0.1 THz–5.6 THz. This study of the frequency-dependen characteristics of the luminescence response to the THz pulse can provide a theoretical basis for the exploration of THz detection technology.

Non-coherent sequence detection scheme for satellite-based automatic identification system

The satellite-based automatic identification system (AIS) receiver has to encounter the frequency offset caused by the Doppler effect and the oscillator instability. This paper proposes a non-coherent sequence detection scheme for the satellite-based AIS signal transmitted over the white Gaussian noise channel. Based on the maximum likelihood estimation and a Viterbi decoder, the proposed scheme is capable of tolerating a frequency offset up to 5% of the symbol rate. The complexity of the proposed scheme is reduced by the state-complexity reduction, which is based on per-survivor processing. Simulation results prove that the proposed non-coherent sequence detection scheme has high robustness to frequency offset compared to the relative scheme when messages collision exists.

Unsupervised change detection of man-made objects using coherent and incoherent features of multi-temporal SAR images

Constrained by complex imaging mechanism and extraordinary visual appearance,change detection with synthetic aperture radar(SAR)images has been a difficult research topic,especially in urban areas.Although existing studies have extended from bi-temporal data pair to multi-temporal datasets to derive more plentiful information,there are still two problems to be solved in practical applications.First,change indicators constructed from incoherent feature only cannot characterize the change objects accurately.Second,the results of pixel-level methods are usually presented in the form of the noisy binary map,making the spatial change not intuitive and the temporal change of a single pixel meaningless.In this study,we propose an unsupervised man-made objects change detection framework using both coherent and incoherent features derived from multi-temporal SAR images.The coefficients of variation in timeseries incoherent features and the man-made object index(MOI)defined with coherent features are first combined to identify the initial change pixels.Afterwards,an improved spatiotemporal clustering algorithm is developed based on density-based spatial clustering of applications with noise(DBSCAN)and dynamic time warping(DTW),which can transform the initial results into noiseless object-level patches,and take the cluster center as a representative of the man-made object to determine the change pattern of each patch.An experiment with a stack of 10 TerraSAR-X images in Stripmap mode demonstrated that this method is effective in urban scenes and has the potential applicability to wide area change detection.

Radar fast long-time coherent integration via TR-SKT and robust sparse FRFT

Long-time coherent integration(LTCI)is an effective way for radar maneuvering target detection,but it faces the problem of a large number of search parameters and large amount of calculation.Realizing the simultaneous compensation of the range and Doppler migrations in complex clutter back-ground,and at the same time improving the calculation efficiency has become an urgent problem to be solved.The sparse transformation theory is introduced to LTCI in this paper,and a non-parametric searching sparse LTCI(SLTCI)based maneuvering target detection method is proposed.This method performs time reversal(TR)and second-order Keystone transform(SKT)in the range frequency&slow-time data to complete high-order range walk compensation,and achieves the coherent integra-tion of maneuvering target across range and Doppler units via the robust sparse fractional Fourier transform(RSFRFT).It can compensate for the nonlinear range migration caused by high-order motion.S-band and X-band radar data measured in sea clutter background are used to verify the detection performance of the proposed method,which can achieve better detection performance of maneuvering targets with less computational burden compared with several popular integration methods.

RFI Detection for Multichannel HRWS SAR System Based on Spatial Cross Correlation

Multichannel high-resolution and wide-swath(HRWS)imaging is an advanced digital beamforming technique for future synthetic aperture radar(SAR)systems.However,radio frequency interference(RFI)is a critical concern for HRWS SAR missions,which distorts measure-ments and produces image artifacts.In this paper,the spatial cross-correlation coefficients of multichannel HRWS SAR signals are investigated for RFI detection.It is found when the two channels are correlated,RFI-polluted areas present lower coherence values than non-polluted areas in the same scenarios,which makes previous methods fail.Further,this paper studies the case of two fully decorrelated channels to maximize the coherence difference among RFI and target echoes,and RFI detection is realized by exploiting the anomaly value of coherence.Experimental results of real air-borne multichannel SAR data demonstrate that the RFI can be detected successfully.

Detecting spatio-temporal urban surface changes using identified temporary coherent scatterers

Synthetic aperture radar(SAR) is able to detect surface changes in urban areas with a short revisit time, showing its capability in disaster assessment and urbanization monitoring.Most presented change detection methods are conducted using couples of SAR amplitude images. However, a prior date of surface change is required to select a feasible image pair. We propose an automatic spatio-temporal change detection method by identifying the temporary coherent scatterers. Based on amplitude time series, χ^(2)-test and iterative single pixel change detection are proposed to identify all step-times: the moments of the surface change. Then the parameters, e.g., deformation velocity and relative height, are estimated and corresponding coherent periods are identified by using interferometric phase time series. With identified temporary coherent scatterers, different types of temporal surface changes can be classified using the location of the coherent periods and spatial significant changes are identified combining point density and F values. The main advantage of our method is automatically detecting spatio-temporal surface changes without prior information. Experimental results by the proposed method show that both appearing and disappearing buildings with their step-times are successfully identified and results by ascending and descending SAR images show a good agreement.

Entanglement diversion and quantum teleportation of entangled coherent states

The proposals on entanglement diversion and quantum teleportation of entangled coherent states are presented. In these proposals, the entanglement between two coherent states, ｜α〉 and ｜-α〉, with the same amplitude but a phase difference of π is utilized as a quantum channel. The processes of the entanglement diversion and the teleportation are achieved by using the 50/50 symmctric beam splitters, the phase shifters and the photodetectors with the help of classical information.

Saliency detection based on superpixels clustering and stereo disparity

Reliable saliency detection can be used to quickly and effectively locate objects in images. In this paper, a novel algorithm for saliency detection based on superpixels clustering and stereo disparity （SDC） is proposed. Firstly, we use an improved superpixels clustering method to decompose the given image. Then, the disparity of each superpixel is computed by a modified stereo correspondence algorithm. Finally, a new measure which combines stereo disparity with color contrast and spatial coherence is defined to evaluate the saliency of each superpixel. From the experiments we can see that regions with high disparity can get higher saliency value, and the saliency maps have the same resolution with the source images, objects in the map have clear boundaries. Due to the use of superpixel and stereo disparity information, the proposed method is computationally efficient and outperforms some state-of-the-art color- based saliency detection methods.

Edge detection and mathematic fitting for corneal surface with Matlab software

AIM：To select the optimal edge detection methods to identify the corneal surface,and compare three fitting curve equations with Matlab software. METHODS：Fifteen subjects were recruited. The corneal images from optical coherence tomography（OCT）were imported into Matlab software. Five edge detection methods（Canny,Log,Prewitt,Roberts,Sobel）were used to identify the corneal surface. Then two manual identifying methods（ginput and getpts）were applied to identify the edge coordinates respectively. The differences among these methods were compared. Binomial curve（y=Ax2＋Bx＋C）,Polynomial curve [p（x）=p1xn＋p2x（n-1）＋....＋pnx＋pn＋1] and Conic section（Ax2＋Bxy＋Cy2＋Dx＋Ey＋F=0）were used for curve fitting the corneal surface respectively. The relative merits among three fitting curves were analyzed. Finally,the eccentricity（e）obtained by corneal topography and conic section were compared with paired t-test. RESULTS：Five edge detection algorithms all had continuous coordinates which indicated the edge of the corneal surface. The ordinates of manual identifying were close to the inside of the actual edges. Binomial curve was greatly affected by tilt angle. Polynomial curve was lack of geometrical properties and unstable. Conic section could calculate the tilted symmetry axis,eccentricity,circle center,etc. There were no significant differences between ＇e＇ values by corneal topography and conic section（t=0.9143,P=0.3760 〉0.05）.CONCLUSION：It is feasible to simulate the corneal surface with mathematical curve with Matlab software. Edge detection has better repeatability and higher efficiency. The manual identifying approach is an indispensable complement for detection. Polynomial and conic section are both the alternative methods for corneal curve fitting. Conic curve was the optimal choice based on the specific geometrical properties.

A new optical scheme for teleportation of entangled coherent state

We propose a nearly perfect optical scheme for the quantum teleportation of entangled coherent states using optical devices such as nonlinear Kerr media, beam splitters, phase shifters, and photon detectors. Different from those previous schemes, our scheme needs only ＂yes＂ or＂no＂ measurements of the photon number of the related modes, i.e. nonzero-and zero-photon measurements, while in previous schemes one has to exactly identify the even or odd parity character of the photon numbers detected by detectors.

Study of formation boundary and dip attribute extraction based on edge detection technology

In the seismic profile interpretation process,as the seismic data are big and the small geological features are difficult to identify,improvement of the efficiency is needed. In this study,structure tensor method in computer image edge detection processing is applied into the 2D seismic profile. Coherent attribute is used to extract formation edge. At the same time,extracting the eigenvalues and eigenvectors to calculate the seismic geometric properties which include dip and apparent dip,automatic identification is achieved. Testing the Gaussian kernel function with synthetic models and comparing the coherent attribute and dip attribute extraction results before and after,the conclusion that Gaussian filter can remove the random noise is obtained.

Adaptive detection in the presence of signal mismatch

The problem of adaptive detection in the situation of signal mismatch is considered; that is, the actual signal steering vector is not aligned with the nominal one. Two novel tunable detectors are proposed. They can control the degree to which the mismatched signals are rejected. Remarkably, it is found that they both cover existing famous detectors as their special cases. More importantly, they possess the constant false alarm rate（CFAR）property and achieve enhanced mismatched signal rejection or improved robustness than their natural competitors. Besides, they can provide slightly better matched signals detection performance than the existing detectors.

A Nonparametric Approach to Foreground Detection in Dynamic Backgrounds

Foreground detection is a fundamental step in visual surveillance.However,accurate foreground detection is still a challenging task especially in dynamic backgrounds.In this paper,we present a nonparametric approach to foreground detection in dynamic backgrounds.It uses a history of recently pixel values to estimate background model.Besides,the adaptive threshold and spatial coherence are introduced to enhance robustness against false detections.Experimental results indicate that our approach achieves better performance in dynamic backgrounds compared with several approaches.

Quantum interference between heralded single photon state and coherent state

Balanced homodyne detection has been introduced as a reliable technique of reconstructing the quantum state of a single photon Fock state, which is based on coupling the single photon state and a strong coherent local oscillator in a beam splitter and detecting the field quadrature at the output ports separately. The main challenge associated with a tomographic characterization of the single photon state is mode matching between the single photon state and the local oscillator. Utilizing the heralded single photon generated by the spontaneous parametric process, the multi-mode theoretical model of quantum interference between the single photon state and the coherent state in the fiber beam splitter is established.Moreover, the analytical expressions of the temporal-mode matching coefficient and interference visibility and relationship between the two parameters are shown. In the experimental scheme, the interference visibility under various temporalmode matching coefficients is demonstrated, which is almost accordant with the theoretical value. Our work explores the principle of temporal-mode matching between the single photon state and the coherent photon state, originated from a local oscillator, and could provide guidance for designing the high-performance balanced homodyne detection system.

Efficacy of coronary computed tomography angiography in detecting atherosclerotic plaque in coronary artery disease:a comparative study with optical coherence tomography

1 IntroductionOver the past few decades,there has been impressive technological progress in science and this has obviously yielded a massive progress in medical imaging field.Whereas in the past radiological diagnostic tools were limited to X-rays,ultrasonography,barium meals,etc.,nowadays,technologies such