Evaluation of varying ductile fracture criterion for 7075 aluminum alloy

As one of the principal failures,ductile fracturing restricts metal forming process.Cockcroft-Latham type fracture criterion is suited for ductile fracture in bulk metal-forming simulation.Finding a way to evaluate the ductile fracture criterion（DFC） and identify the relationship between DFC and deformation conditions for a strain-softening material,7075 aluminum alloy;however,it is a non-trivial issue that still needs to be addressed in a greater depth.An innovative approach is brought forth that the compression tests and numerical simulations provide mutual support to evaluate the ductile damage cumulating process and determine the DFC diagram.One of the results shows that for a fixed temperature,the maximum cumulated damage decreases regularly with increasing strain rate.The most important result shows that DFC of 7075 aluminum alloy at temperatures of 573-723 K and strain rates of 0.01-10 s-1 is not a constant but a change in a range of 0.255-0.453,thus it has been defined with varying ductile fracture criterion（VDFC） and characterized by a function of strain rate and temperature.According to VDFC diagram,the exact fracture moment and position during various forming processes will be predicted conveniently,in addition to which,the deformation domains with lower fracture risk corresponding to higher VDFC can be identified.

An Improved Ductile Fracture Criterion for Fine-blanking Process

In order to accurately simulate the fine-blanking process, a suitable ductile fracture is significant.So an evaluation strategy based on experimental and corresponding simulation results of tensile, compression, torsion and fine-blanking test is designed to evaluate five typical ductile fracture criteria, which are widely-used in metal forming process.The stress triaxiality and ductile damage of each test specimen are analyzed.The results show that none of these five criteria is sufficient for all tests.Furthermore, an improved fracture criterion based on Rice and Tracey model, taking the influence of both volume change and shape change of voids into account, is proposed.The characterization of this model for fine-blanking process is easily done by the tensile test and the prediction result shows good.

Comparison of Modified Mohr-Coulomb Model and Bai-Wierzbicki Model for Constructing 3D Ductile Fracture Envelope of AA6063

Ductile fracture of metal often occurs in the plastic forming process of parts.The establishment of ductile fracture criterion can effectively guide the selection of process parameters and avoid ductile fracture of parts during machining.The 3D ductile fracture envelope of AA6063-T6 was developed to predict and prevent its fracture.Smooth round bar tension tests were performed to characterize the flow stress,and a series of experiments were conducted to characterize the ductile fracture firstly,such as notched round bar tension tests,compression tests and torsion tests.These tests cover a wide range of stress triaxiality(ST)and Lode parameter(LP)to calibrate the ductile fracture criterion.Plasticity modeling was performed,and the predicted results were compared with corresponding experimental data to verify the plasticity model after these experiments.Then the relationship between ductile fracture strain and ST with LP was constructed using the modified Mohr-Coulomb(MMC)model and Bai-Wierzbicki(BW)model to develop the 3D ductile fracture envelope.Finally,two ductile damage models were proposed based on the 3D fracture envelope of AA6063.Through the comparison of the two models,it was found that BW model had better fitting effect,and the sum of squares of residual error of BW model was 0.9901.The two models had relatively large errors in predicting the fracture strain of SRB tensile test and torsion test,but both of the predicting error of both two models were within the acceptable range of 15%.In the process of finite element simulation,the evolution process of ductile fracture can be well simulated by the two models.However,BW model can predict the location of fracture more accurately than MMC model.

Comparative study on forming limit prediction of AA7075-T6 sheet with M−K model and Lou−Huh criterion

In order to effectively predict the fracture of AA7075-T6 sheet, the forming limit curves of AA7075-T6 high-strength sheet were drawn according to Morciniak Kuczyski (M K) model and Lou Huh criterion, respectively. The errors between the predicted values of the two theoretical prediction models and experimental values were calculated by error analysis. The forming limit curves were verified by the punch stretch test to evaluate the prediction accuracy of M K model and Lou Huh criterion. The error analysis results show that the mean error of Lou Huh criterion with the optimal parameters for all tensile specimens is 25.04%, while the mean error of M K model for all tensile specimens is 74.24%. The prediction accuracy of Lou Huh criterion in predicting the fracture of AA7075-T6 sheet is higher. The punch stretch test results show that the forming limit curve drawn by Lou Huh criterion can effectively predict the fracture of AA7075-T6 sheet, but the prediction accuracy of M K model is relatively poor.

Energy consumption for creep fracture of metallic materials

The energy conservation law is applied to formulate the ductile and brittle creep fracture criterion for metallic materials. The criterion contains a summary of heat and latent energies. Assuming that the heat energy is given out so it has no effect on the fracture process, the ductile creep fracture criterion is simplified. To take into account the evaluation of the damage state of materials the compressibility condition is introduced and the brittle creep fracture law is formulated.

Ductile Fracture Prediction of 316LN Stainless Steel in Hot Deformation Process

A ductile fracture criterion of 316LN stainless steel, combined with the plastic deformation capacity of ma- terial and the stress state dependent damages, was proposed to predict ductile fracture during hot deformation. To the end, tensile tests at high temperatures were first performed to investigate the fracture behavior of 316LN stain- less steel. The experimental results show the variation of the critical fracture strain as a function of temperature and strain rate. Second, the criterion was calibrated by using the upsetting tests and the corresponding numerical simula- tions. Finally, the proposed fracture criterion was validated by the designed tests and the corresponding finite ele- ment （FE） simulation. The results show that the criterion can successfully predict the onset of ductile fracture at ele- vated temperatures.

Stress based forming limit diagram for formability characterization of 6061 aluminum

Two numerical criteria of forming limit diagram（FLD） criterion and ductile fracture criterion（DFC） are presented for FLD prediction of 6061 aluminum. The numerical results are compared with the experimental FLD and also punch＇s load-displacement curve of experimental samples. Experimental FLD of this study is calculated using hemispherical punch test of Hecker. Experimental FLD is converted to FLSD and imported to the Abaqus software to predict necking of samples. Numerical results for FLSD prediction were compared with experimental FLSD. Results show that ductile fracture criterion has higher accuracy for FLD and FLSD prediction of 6061 aluminum. Comparison of numerical and experimental results for force-displacement curve of punch shows that numerical results have a good agreement with experiment.