Duplex stainless steels(DSSs)show better corrosion resistance with higher strength than traditional austenite stainless steels in many aggressive environments,and can be welded properly with almost every welding proce...Duplex stainless steels(DSSs)show better corrosion resistance with higher strength than traditional austenite stainless steels in many aggressive environments,and can be welded properly with almost every welding processes,if proper heat input is provided.Progresses of research works on weldability of DSSs in recent years are reviewed in this paper.Balance control of ferrite/austenite phases is most important for DSSs welding.The phases balance can be controlled with filler materials,nitrogen addition in shielding gas,heat input,post weld heat treatment,and alternating magnetic field.Too high cooling rate results in not only extra ferrite,but also chromium nitride precipitation.While too low cooling rate or heating repeatedly results in precipitation of secondary austenite and intermetallic compounds.In both situations,mechanical properties and corrosion resistance of the DSS joints deteriorate.Recommended upper and lower limits of heat input and maximum interpass temperature should be observed.展开更多
Coronavirus disease(COVID-19)is a serious respiratory disease that spreads through the coronavirus globally.It soon became a pandemic after its appearance in 2019 and demanded new techniques for its identification and...Coronavirus disease(COVID-19)is a serious respiratory disease that spreads through the coronavirus globally.It soon became a pandemic after its appearance in 2019 and demanded new techniques for its identification and detection.Owing to this situation,RT-LAMP appears to be a novel method for the identification of COVID-19 because of its vast applications,including cost-effectiveness and time-saving.This research highlights the use of RT-LAMP,a more sensitive test than RT-PCR,for the assessment of SARS-CoV-2,the severe acute respiratory illness.To identify the spike(S)and NSP1 protein using RT-LAMP,170 total samples of coronavirus-suspected patients were served in this research.Health certifications and bioethical considerations were taken into consideration.After the sample was extracted from the patient's swabs,RNA was isolated,extracted,and purified.The response was then run on the RT-LAMP at the ideal temperature,and the outcomes could be observed with the unaided eye as they changed from pink to yellow.It is a simple method of determining if the test is positive or negative.For this purpose,both RT-LAMP and RT-PCR tests are used during these procedures.Genes linked with COVID-19 testing including S,nspl,and ORF are suited to coronavirus testing;they have 100%specificity and low sensitivity,but S has more specificity and sensitivity than nspl and ORF,respectively.Out of the 95 positive samples,89(93.68%)samples yielded favorable outcomes utilizing RT-LAMP,while 55 negative samples yielded 100%positive results.The present research demonstrates that RT-LAMP is less sensitive yet more selective for coronavirus detection.展开更多
Africanswinefever(ASF),causedbythe African swine fever virus (ASFV), is an acute, hemorrhagic, and contagious disease of domestic pigs and wild boars.The disease is notifiable and listed by the World Organization for ...Africanswinefever(ASF),causedbythe African swine fever virus (ASFV), is an acute, hemorrhagic, and contagious disease of domestic pigs and wild boars.The disease is notifiable and listed by the World Organization for Animal Health (WOAH)(Wang N et al. 2019).展开更多
Network-assisted full duplex(NAFD)cellfree(CF)massive MIMO has drawn increasing attention in 6G evolvement.In this paper,we build an NAFD CF system in which the users and access points(APs)can flexibly select their du...Network-assisted full duplex(NAFD)cellfree(CF)massive MIMO has drawn increasing attention in 6G evolvement.In this paper,we build an NAFD CF system in which the users and access points(APs)can flexibly select their duplex modes to increase the link spectral efficiency.Then we formulate a joint flexible duplexing and power allocation problem to balance the user fairness and system spectral efficiency.We further transform the problem into a probability optimization to accommodate the shortterm communications.In contrast with the instant performance optimization,the probability optimization belongs to a sequential decision making problem,and thus we reformulate it as a Markov Decision Process(MDP).We utilizes deep reinforcement learning(DRL)algorithm to search the solution from a large state-action space,and propose an asynchronous advantage actor-critic(A3C)-based scheme to reduce the chance of converging to the suboptimal policy.Simulation results demonstrate that the A3C-based scheme is superior to the baseline schemes in term of the complexity,accumulated log spectral efficiency,and stability.展开更多
This paper investigated on influence of different alloying elements added into duplex stainless steel (DSS) on phase transitions using thermochemical methods in comparison with experiment.The results showed that the m...This paper investigated on influence of different alloying elements added into duplex stainless steel (DSS) on phase transitions using thermochemical methods in comparison with experiment.The results showed that the most possible species in the ferrite phase,austenite phase,σphase,Hcp phase,χphase,and carbide were Cr:Va-type,Fe:Va-type,Ni:Cr:Mo-type,Cr_(2)N-type,Fe_(24)Mo_(10)Cr_(24)-type,and Cr:Mo:C-type,respectively.Furthermore,the Ni,N,Cr,and Mo alloying had significant influences on the transition of each DSS phase.The Ni and N additions obviously raised the temperature at ferrite-1/austenite-1 balance while the Cr and Mo decreased the dual-phase balance temperature.In addition,the Ni addition can promote the precipitating ofσphase at relatively high temperature while the precipitating of Hcp phase at relatively low temperature.The Hcp phase andχphase can be obviously increased by the N addition.The introduction of Cr and Mo notably enhances the precipitation ofσphase.However,the promotion ofχphase precipitation is facilitated by the presence of Mo,while the Cr element acts as an inhibitor forχphase precipitation.Furthermore,the ferrite/austenite ratio tested by experiment was higher than that calculated by thermochemical methods,thus pre-designed solution temperature should be lower about 30-100℃than that calculated by thermochemical methods.展开更多
Bipolar electrochemistry is used to produce a linear potential gradient across a bipolar electrode(BPE),providing direct access to the anodic and cathodic reactions under a wide range of applied potentials.The occurre...Bipolar electrochemistry is used to produce a linear potential gradient across a bipolar electrode(BPE),providing direct access to the anodic and cathodic reactions under a wide range of applied potentials.The occurrence of pitting corrosion,crevice corrosion,and general corrosion on type 2205 duplex stainless steel(DSS 2205)BPE has been observed at room temperature.The critical pit depth of 10-20μm with a55%-75% probability of pits developing into stable pits at potential from+0.9 to+1.2 V vs.OCP(open circuit potential)are measured.All pit nucleation sites are either within ferritic grains or at the interface between austenite and ferrite.The critical conditions for pitting and crevice corrosion are discussed with Epit(critical pitting potential)and Ecre(critical crevice potential)decreasing from 0.87 and 0.80 V vs.OCP after150 s of exposure to 0.84 and 0.76 V vs.OCP after 900 s of exposure,respectively.Pit growth kinetics under different applied bipolar potentials and exposure times have been obtained.The ferrite is shown to be more susceptible to general dissolution.展开更多
Phase transformation is one of the factors that would significantly influence the ability to resist cavitation erosion of stainless steels. Due to the specific properties of duplex stainless steel, the heat treatment ...Phase transformation is one of the factors that would significantly influence the ability to resist cavitation erosion of stainless steels. Due to the specific properties of duplex stainless steel, the heat treatment would bring about significant phase transformations. In this paper, we have examined the previous studies on the phase transition of stainless steel, including the literature on the classification of stainless steel, spinodal decomposition, sigma phase transformation, and cavitation erosion of double stainless steel. Through these literature investigations, the destruction of cavitation erosion on duplex stainless steel can be clearly known, and the causes of failure of duplex stainless steel in seawater can be clarified, thus providing a theoretical basis for subsequent scientific research. And the review is about to help assess the possibility of using bulk heat treatment to improve the cavitation erosion (CE) behaviour of the duplex stainless steel 7MoPLUS.展开更多
A kind of micro/nanostructured 2205 duplex stainless steel(DSS)with uniform distribution of nanocrystals was prepared via aluminothermic reaction method.The analysis of stress-strain curve showed that the fracture str...A kind of micro/nanostructured 2205 duplex stainless steel(DSS)with uniform distribution of nanocrystals was prepared via aluminothermic reaction method.The analysis of stress-strain curve showed that the fracture strength and elongation of the specimen were 946 MPa and 24.7%,respectively.At present,the research on microstructure of bimodal 2205 DSS at room temperature(RT)mainly depended on scanning electron microscope(SEM)observation after loading experiments.The test result indicates that there are two different yield stages in stress-strain curve of specimen during tensile process.The microstructure of duplex bimodal structured stainless steel consists of two pairs of soft hard regions and phases.By studying deformation mechanism of bimodal structured stainless steel,the interaction between soft phase and hard phase are discussed.The principle of composition design and microstructure control of typical duplex stainless steel is obtained,which provides an important research basis for designing of advanced duplex stainless steel.展开更多
Next-Generation(NextG)wireless communication networks with their widespread applications require high data rates,seamless connectivity and high quality of service(QoS).To cope up with an unprecedented rise of data hun...Next-Generation(NextG)wireless communication networks with their widespread applications require high data rates,seamless connectivity and high quality of service(QoS).To cope up with an unprecedented rise of data hungry applications,users demand more spectral resources imposing a limitation on available wireless spectrum.One of the potential solutions to address the spectrum scarce issue is to incorporate in band full duplex(IBFD)or full duplex(FD)paradigm in next generation networks including 5G new radio(NR).Recently,FD has gained the research interest in cellular networks for its potential to double the wireless link capacity and enhancing spectral efficiency(SE).In half duplex(HD)cellular networks,base stations(BSs)can either perform uplink(UL)or downlink(DL)transmission at a particular time instant leading to reduced throughput levels.Due to the advancement in the self interference reduction(SIR)techniques,full duplex base stations(FD-BSs)can be employed to allow simultaneous UL and DL transmissions at the same time–frequency resources as compared to its HD counterpart.It ideally achieves twice the throughput without any additional complexity at user-equipment(UE).This paper covers a detailed survey on FD cellular networks.A series of SIR approaches,UE-UE mitigation techniques are summarized.Various existing MAC protocols and antenna architectures for FD cellular networks are outlined.An overview of security aspects for FD in cellular networks is also presented.Lastly,various open issues and possible research directions are brought up for FD cellular networks.展开更多
文摘Duplex stainless steels(DSSs)show better corrosion resistance with higher strength than traditional austenite stainless steels in many aggressive environments,and can be welded properly with almost every welding processes,if proper heat input is provided.Progresses of research works on weldability of DSSs in recent years are reviewed in this paper.Balance control of ferrite/austenite phases is most important for DSSs welding.The phases balance can be controlled with filler materials,nitrogen addition in shielding gas,heat input,post weld heat treatment,and alternating magnetic field.Too high cooling rate results in not only extra ferrite,but also chromium nitride precipitation.While too low cooling rate or heating repeatedly results in precipitation of secondary austenite and intermetallic compounds.In both situations,mechanical properties and corrosion resistance of the DSS joints deteriorate.Recommended upper and lower limits of heat input and maximum interpass temperature should be observed.
文摘Coronavirus disease(COVID-19)is a serious respiratory disease that spreads through the coronavirus globally.It soon became a pandemic after its appearance in 2019 and demanded new techniques for its identification and detection.Owing to this situation,RT-LAMP appears to be a novel method for the identification of COVID-19 because of its vast applications,including cost-effectiveness and time-saving.This research highlights the use of RT-LAMP,a more sensitive test than RT-PCR,for the assessment of SARS-CoV-2,the severe acute respiratory illness.To identify the spike(S)and NSP1 protein using RT-LAMP,170 total samples of coronavirus-suspected patients were served in this research.Health certifications and bioethical considerations were taken into consideration.After the sample was extracted from the patient's swabs,RNA was isolated,extracted,and purified.The response was then run on the RT-LAMP at the ideal temperature,and the outcomes could be observed with the unaided eye as they changed from pink to yellow.It is a simple method of determining if the test is positive or negative.For this purpose,both RT-LAMP and RT-PCR tests are used during these procedures.Genes linked with COVID-19 testing including S,nspl,and ORF are suited to coronavirus testing;they have 100%specificity and low sensitivity,but S has more specificity and sensitivity than nspl and ORF,respectively.Out of the 95 positive samples,89(93.68%)samples yielded favorable outcomes utilizing RT-LAMP,while 55 negative samples yielded 100%positive results.The present research demonstrates that RT-LAMP is less sensitive yet more selective for coronavirus detection.
基金supported by the National Key R&D Program of China (2021 YF D1800101 and 2019YFE0107300)the Applied Technology Research and Development Project of Heilongjiang Province, China (GA19B301)the Central Public-Interest Scientific Institution Basal Research Fund, China (1610302022003)。
文摘Africanswinefever(ASF),causedbythe African swine fever virus (ASFV), is an acute, hemorrhagic, and contagious disease of domestic pigs and wild boars.The disease is notifiable and listed by the World Organization for Animal Health (WOAH)(Wang N et al. 2019).
基金supported by the National Key R&D Program of China under Grant 2020YFB1807204the BUPT Excellent Ph.D.Students Foundation under Grant CX2022306。
文摘Network-assisted full duplex(NAFD)cellfree(CF)massive MIMO has drawn increasing attention in 6G evolvement.In this paper,we build an NAFD CF system in which the users and access points(APs)can flexibly select their duplex modes to increase the link spectral efficiency.Then we formulate a joint flexible duplexing and power allocation problem to balance the user fairness and system spectral efficiency.We further transform the problem into a probability optimization to accommodate the shortterm communications.In contrast with the instant performance optimization,the probability optimization belongs to a sequential decision making problem,and thus we reformulate it as a Markov Decision Process(MDP).We utilizes deep reinforcement learning(DRL)algorithm to search the solution from a large state-action space,and propose an asynchronous advantage actor-critic(A3C)-based scheme to reduce the chance of converging to the suboptimal policy.Simulation results demonstrate that the A3C-based scheme is superior to the baseline schemes in term of the complexity,accumulated log spectral efficiency,and stability.
基金National Natural Science Foundation of China(51905536)Natural Science Foundation of Tianjin(22JCYBJC01280)Key Project of Natural Science of Fundamental Research Funds for the Central Universities of China(3122023039).
文摘This paper investigated on influence of different alloying elements added into duplex stainless steel (DSS) on phase transitions using thermochemical methods in comparison with experiment.The results showed that the most possible species in the ferrite phase,austenite phase,σphase,Hcp phase,χphase,and carbide were Cr:Va-type,Fe:Va-type,Ni:Cr:Mo-type,Cr_(2)N-type,Fe_(24)Mo_(10)Cr_(24)-type,and Cr:Mo:C-type,respectively.Furthermore,the Ni,N,Cr,and Mo alloying had significant influences on the transition of each DSS phase.The Ni and N additions obviously raised the temperature at ferrite-1/austenite-1 balance while the Cr and Mo decreased the dual-phase balance temperature.In addition,the Ni addition can promote the precipitating ofσphase at relatively high temperature while the precipitating of Hcp phase at relatively low temperature.The Hcp phase andχphase can be obviously increased by the N addition.The introduction of Cr and Mo notably enhances the precipitation ofσphase.However,the promotion ofχphase precipitation is facilitated by the presence of Mo,while the Cr element acts as an inhibitor forχphase precipitation.Furthermore,the ferrite/austenite ratio tested by experiment was higher than that calculated by thermochemical methods,thus pre-designed solution temperature should be lower about 30-100℃than that calculated by thermochemical methods.
基金supported by the Science&Technology Fundamental Resources Investigation Program(No.2022FY10300)The National Natural Science Foundation of China(No.U22B2065)support of the Henry Royce Institute for access to the Keyence laser scanning confocal microscope and the ZEISS Sigma FEG-SEM at Royce@Manchester(No.EP/R00661X/1)。
文摘Bipolar electrochemistry is used to produce a linear potential gradient across a bipolar electrode(BPE),providing direct access to the anodic and cathodic reactions under a wide range of applied potentials.The occurrence of pitting corrosion,crevice corrosion,and general corrosion on type 2205 duplex stainless steel(DSS 2205)BPE has been observed at room temperature.The critical pit depth of 10-20μm with a55%-75% probability of pits developing into stable pits at potential from+0.9 to+1.2 V vs.OCP(open circuit potential)are measured.All pit nucleation sites are either within ferritic grains or at the interface between austenite and ferrite.The critical conditions for pitting and crevice corrosion are discussed with Epit(critical pitting potential)and Ecre(critical crevice potential)decreasing from 0.87 and 0.80 V vs.OCP after150 s of exposure to 0.84 and 0.76 V vs.OCP after 900 s of exposure,respectively.Pit growth kinetics under different applied bipolar potentials and exposure times have been obtained.The ferrite is shown to be more susceptible to general dissolution.
文摘Phase transformation is one of the factors that would significantly influence the ability to resist cavitation erosion of stainless steels. Due to the specific properties of duplex stainless steel, the heat treatment would bring about significant phase transformations. In this paper, we have examined the previous studies on the phase transition of stainless steel, including the literature on the classification of stainless steel, spinodal decomposition, sigma phase transformation, and cavitation erosion of double stainless steel. Through these literature investigations, the destruction of cavitation erosion on duplex stainless steel can be clearly known, and the causes of failure of duplex stainless steel in seawater can be clarified, thus providing a theoretical basis for subsequent scientific research. And the review is about to help assess the possibility of using bulk heat treatment to improve the cavitation erosion (CE) behaviour of the duplex stainless steel 7MoPLUS.
基金Funded by the National Natural Science Foundation of China(No.51911530119)the Department of Education of Gansu Province Innovation Fund(No.2021A-023)the Open Fund Project of Key Laboratory of Solar Power System Engineering Project(No.2022SPKL01)。
文摘A kind of micro/nanostructured 2205 duplex stainless steel(DSS)with uniform distribution of nanocrystals was prepared via aluminothermic reaction method.The analysis of stress-strain curve showed that the fracture strength and elongation of the specimen were 946 MPa and 24.7%,respectively.At present,the research on microstructure of bimodal 2205 DSS at room temperature(RT)mainly depended on scanning electron microscope(SEM)observation after loading experiments.The test result indicates that there are two different yield stages in stress-strain curve of specimen during tensile process.The microstructure of duplex bimodal structured stainless steel consists of two pairs of soft hard regions and phases.By studying deformation mechanism of bimodal structured stainless steel,the interaction between soft phase and hard phase are discussed.The principle of composition design and microstructure control of typical duplex stainless steel is obtained,which provides an important research basis for designing of advanced duplex stainless steel.
文摘Next-Generation(NextG)wireless communication networks with their widespread applications require high data rates,seamless connectivity and high quality of service(QoS).To cope up with an unprecedented rise of data hungry applications,users demand more spectral resources imposing a limitation on available wireless spectrum.One of the potential solutions to address the spectrum scarce issue is to incorporate in band full duplex(IBFD)or full duplex(FD)paradigm in next generation networks including 5G new radio(NR).Recently,FD has gained the research interest in cellular networks for its potential to double the wireless link capacity and enhancing spectral efficiency(SE).In half duplex(HD)cellular networks,base stations(BSs)can either perform uplink(UL)or downlink(DL)transmission at a particular time instant leading to reduced throughput levels.Due to the advancement in the self interference reduction(SIR)techniques,full duplex base stations(FD-BSs)can be employed to allow simultaneous UL and DL transmissions at the same time–frequency resources as compared to its HD counterpart.It ideally achieves twice the throughput without any additional complexity at user-equipment(UE).This paper covers a detailed survey on FD cellular networks.A series of SIR approaches,UE-UE mitigation techniques are summarized.Various existing MAC protocols and antenna architectures for FD cellular networks are outlined.An overview of security aspects for FD in cellular networks is also presented.Lastly,various open issues and possible research directions are brought up for FD cellular networks.
