Discussion on Dust Removal(Suppression)System of Crushing Station in Open-Pit Coal Mine

This paper introduces the method of coal dust treatment in crushing station and the present situation of dust removal system in typical open-pit coal mine crushing station in China,and expounds the research idea of determining comprehensive dust removal(suppression)system in crushing station inspired by the working principle of"range hood".Based on the design example and link optimization of the crush-ing station of open-pit coal mine I of Thar coalfield,this paper finally draws some conclusions on the key technologies of dust removal(suppression)system of open-pit coal mine crushing station.This study has certain reference value for the technical innovation of dust removal(suppression)system in crushing station,the realization of green mining in"crushing link",and the reduction and avoidance of ecological environment pollution in mining area.

Design and Numerical Simulation of Dust Removal System for Sutomotive Iongitudinal Beam Plasma Cutting

To improve the poor efficiency of the dust removal system in the plasma cutting station of automotive longitudinal beams,and reduce the cutting surface quality degradation due to dust,a bottom-side suction dust removal system is designed,and the dust removal effect is optimized through the setting of the following dampers and diversion plates.The result of numerical simulation indicates that the particle collection rate can reach 99.44%,and the field test also proves the effectiveness of the dust removal system,which is of guiding significance for the transformation of other similar dust removal systems.

Online coal dust suppression system for opencast coal mines

Coal is the major source of power in India and world over.Coal mining is an essential industry which has a major role in the economic development of the country.Most major mining activities contribute directly or indirectly to air pollution.Coal dust is a major air pollutant which affects the personal working in the mines and also people residing in villages near the mines.Air pollution due to coal particulates can affect human health and cause damages to the environment.Hence effective pollution control mechanisms are needed to keep the pollution levels within permissible levels.The easiest and most common method employed for dust suppression worldwide is sprinkling of water.In majority of mines,water sprinklers are operated manually and can lead to wastage of water due to over sprinkling.It can also prove to be ineffective in dust suppression if sprinkling is not done properly.The paper proposes a system which can be deployed to automate the dust suppressions sprinklers.The system will monitor the concentration of PM_(10) and PM_(2.5) in the air and initiate sprinkling operation when the particulate matter content exceeds preconfigured limits.

Hydrogen inhibition effect of chitosan and sodium phosphate on ZK60 waste dust in a wet dust removal system:A feasible way to control hydrogen explosion

Wet dust removal systems used to control dust in the polishing or grinding process of Mg alloy products are frequently associated with potential hydrogen explosion caused by magnesium-water reaction.For purpose of avoiding hydrogen explosion risks,we try to use a combination of chitosan(CS)and sodium phosphate(SP)to inhibit the hydrogen evolution reaction between magnesium alloy waste dust and water.The hydrogen evolution curves and chemical kinetics modeling for ten different mixing ratios demonstrate that 0.4wt%CS+0.1wt%SP yields the best inhibition efficiency with hydrogen generation rate of almost zero.SEM and EDS analyses indicate that this composite inhibitor can create a uniform,smooth,tight protective film over the surface of the alloy dust particles.FTIR and XRD analysis of the chemical composition of the surface film show that this protective film contains CS and SP chemically adsorbed on the surface of ZK60 but no detectable Mg(OH)_(2),suggesting that magnesium-water reaction was totally blocked.Our new method offers a thorough solution to hydrogen explosion by inhibiting the hydrogen generation of magnesium alloy waste dust in a wet dust removal system.

Experimental observations of naturally occurring dust using a high-speed vacuum ultraviolet imaging system in EAST

In the ELMy H-mode experiment,naturally occurring dust originating at the high-field side is clearly observed using the high-speed vacuum ultraviolet imaging system developed on the Experimental Advanced Superconducting Tokamak(EAST).The main ablation cloud shape is similar to the classical shape observed in pellet fueling experiments.However,during the dust penetration,an erupted secondary cloudlet with a bent‘cigar’shape is observed and moves upwards along the direction perpendicular to the magnetic field line,which is different to the obviation in the pellet fueling experiments.This may be due to the ion diamagnetic drift effect.The velocities of the secondary cloudlet are estimated to be 50–80 m s^(-1).In addition,a significant degradation of the plasma confinement is observed during the dust penetration.

A systematic review of occupational exposure to respirable coal mine dust(RCMD)in the U.S.mining industry

Cumulative inhalation of respirable coal mine dust(RCMD)can lead to severe lung diseases,including coal worker's pneu-moconiosis(CWP),silicosis,mixed dust pneumoconiosis,dust-related diffuse fibrosis(DDF),and progressive massive fibrosis(PMF).Statistics from the number of reported cases showed a significant decrease in the progression of respiratory diseases in the 1990s.However,an unexpected increase in the number of CWP cases was reported in the late 1990s.To date,there has been no comprehensive systematic review to assess all contributing factors to the resurgence of CWP cases.This study aims to investigate the effects of various mining parameters on the prevalence of CWP in coal mines.A systematic review using the preferred reporting items for systematic reviews and meta-analysis(PRISMA)method was conducted to investigate the health effects of RCMD exposure and identify the factors that may contribute to the recent resurgence of CWP cases.The systematic review yielded a total of 401 papers,which were added to the database.The total number of 148 and 208 papers were excluded from the database in the process of screening and eligibility,respectively.Then,18 papers were considered for data selection and full-text assessment.The review revealed that factors including geographic location,mine size,mining operation type,coal-seam thickness,coal rank,changes in mining practices,technology advancement,and engi-neering dust control practices are contributing to the recent resurgence of CWP among coal workers.However,the evidence for root causes is limited owing to the methodological constraints of the studies;therefore,further detailed studies are needed.

尺度适应性起沙机制在CMA-CUACE/Dust中的应用

沙尘暴是影响我国重要的灾害性天气之一,针对中国气象局亚洲沙尘暴数值预报系统CMA-CUACE/Dust(China Meteorological Administration Unified Atmospheric Environment for Dust)的沙尘质量浓度在中亚高估、蒙古北部低估、在我国消散过快以及极端沙尘暴预报峰值偏低等问题,应用与模式格距匹配的尺度适应性起沙机制并更新风蚀资料库对模式进行改进。对2021年3月13—17日东亚最强沙尘暴个例和2023年3—5月与业务运行环境一致的连续预报试验表明,改进后的模式(CMA-CUACE/Dust V1.5)有效改善了上述不足,极端沙尘暴过程传输至我国后的沙尘质量浓度峰值与观测接近。连续预报试验TS(threat score)评分显示:CMA-CUACE/Dust V1.5预报一致性和连续性较好,1~5 d不同时效预报TS评分明显高于改进前和韩国模式ADAM(the Asian Dust Aerosol Model),漏报率明显降低,对2023年5次沙尘过程的4次预报TS评分高于0.3,部分过程超过0.5。

Deflagration characteristics of freely propagating flames in magnesium hydride dust clouds

The flame propagation processes of MgH_(2)dust clouds with four different particle sizes were recorded by a high-speed camera.The dynamic flame temperature distributions of MgH_(2)dust clouds were reconstructed by the two-color pyrometer technique,and the chemical composition of solid combustion residues were analyzed.The experimental results showed that the average flame propagation velocities of 23μm,40μm,60μm and 103μm MgH_(2)dust clouds in the stable propagation stage were 3.7 m/s,2.8 m/s,2.1 m/s and 0.9 m/s,respectively.The dust clouds with smaller particle sizes had faster flame propagation velocity and stronger oscillation intensity,and their flame temperature distributions were more even and the temperature gradients were smaller.The flame structures of MgH_(2)dust clouds were significantly affected by the particle sinking velocity,and the combustion processes were accompanied by micro-explosion of particles.The falling velocities of 23μm and 40μm MgH_(2)particles were 2.24 cm/s and 6.71 cm/s,respectively.While the falling velocities of 60μm and 103μm MgH_(2)particles were as high as 15.07 cm/s and 44.42 cm/s,respectively,leading to a more rapid downward development and irregular shape of the flame.Furthermore,the dehydrogenation reaction had a significant effect on the combustion performance of MgH_(2)dust.The combustion of H_(2)enhanced the ignition and combustion characteristics of MgH_(2)dust,resulting in a much higher explosion power than the pure Mg dust.The micro-structure characteristics and combustion residues composition analysis of MgH_(2)dust indicated that the combustion control mechanism of MgH_(2)dust flame was mainly the heterogeneous reaction,which was affected by the dehydrogenation reaction.

Effects of dust controls on respirable coal mine dust composition and particle sizes:case studies on auxiliary scrubbers and canopy air curtain

Control of dust in underground coal mines is critical for mitigating both safety and health hazards.For decades,the National Institute of Occupational Safety and Health(NIOSH)has led research to evaluate the effectiveness of various dust control technologies in coal mines.Recent studies have included the evaluation of auxiliary scrubbers to reduce respirable dust downstream of active mining and the use of canopy air curtains(CACs)to reduce respirable dust in key operator positions.While detailed dust characterization was not a focus of such studies,this is a growing area of interest.Using preserved filter samples from three previous NIOSH studies,the current work aims to explore the effect of two different scrubbers(one wet and one dry)and a roof bolter CAC on respirable dust composition and particle size distribution.For this,the preserved filter samples were analyzed by thermogravimetric analysis and/or scanning electron microscopy with energy dispersive X-ray.Results indicate that dust composition was not appreciably affected by either scrubber or the CAC.However,the wet scrubber and CAC appeared to decrease the overall particle size distribution.Such an effect of the dry scrubber was not consistently observed,but this is probably related to the particular sampling location downstream of the scrubber which allowed for significant mixing of the scrubber exhaust and other return air.Aside from the insights gained with respect to the three specific dust control case studies revisited here,this work demonstrates the value of preserved dust samples for follow-up investigation more broadly.

Filtration performance and modeling of granular bed for dust removal from coal pyrolytic vapors

Dust removal from pyrolytic vapors at high temperatures is an obstacle to the industrialization of the coal pyrolysis process.In this work,a granular bed with expanded perlites as filtration media was designed and integrated into a 10 t·d^(–1)coal pyrolysis facility.The testing results showed that around 97.56%dust collection efficiency was achieved.As a result,dust content in tar was significantly lowered.The pressure drop of the granular bed maintained in the range of 356 Pa to 489 Pa.The dust size in the effluent after filtration exhibited a bimodal distribution,which was attributed to the heterogeneity of the dust components.The effects of filtration bed on pyrolytic product yields were also discussed.A modified filtration model based on the macroscopic phenomenological theory was proposed to describe the performance of the granular bed.The computation results were well agreed with the experimental data.

Oxygen-assisted zinc recovery from electric arc furnace dust using magnesium chloride

Electric arc furnace(EAF)dust is an important secondary resource containing metals,such as zinc(Zn)and iron(Fe).Recover-ing Zn from EAF dust can contribute to resource recycling and reduce environmental impacts.However,the high chemical stability of ZnFe_(2)O_(4)in EAF dust poses challenges to Zn recovery.To address this issue,a facile approach that involves oxygen-assisted chlorination using molten MgCl_(2)is proposed.This work focused on elucidating the role of O2 in the reaction between ZnFe_(2)O_(4)and molten MgCl_(2).The results demonstrate that MgCl_(2)effectively broke down the ZnFe_(2)O_(4)structure,and the high O2 atmosphere considerably promoted the sep-aration of Zn from other components in the form of ZnCl_(2).The presence of O2 facilitated the formation of MgFe_(2)O_(4),which stabilized Fe and prevented its chlorination.Furthermore,the excessive use of MgCl_(2)resulted in increased evaporation loss,and high temperatures pro-moted the rapid separation of Zn.Building on these findings,we successfully extracted ZnCl_(2)-enriched volatiles from practical EAF dust through oxygen-assisted chlorination.Under optimized conditions,this method achieved exceptional Zn chlorination percentage of over 97%within a short period,while Fe chlorination remained below 1%.The resulting volatiles contained 85wt%of ZnCl_(2),which can be further processed to produce metallic Zn.The findings offer guidance for the selective recovery of valuable metals,particularly from solid wastes such as EAF dust.

Experimental and numerical simulation study on forced ventilation and dust removal of coal mine heading surface

In order to study the problems of unreasonable airflow distribution and serious dust pollution in a heading surface,an experimental platform for forced ventilation and dust removal was built based on the similar principles.Through the similar experiment and numerical simulation,the distribution of airflow field in the roadway and the spatial and temporal evolution of dust pollution under the conditions of forced ventilation were determined.The airflow field in the roadway can be divided into three zones:jet zone,vortex zone and reflux zone.The dust concentration gradually decreases from the head to the rear of the roadway.Under the forced ventilation conditions,there is a unilateral accumulation of dust,with higher dust concentrations away from the ducts.The position of the equipment has an interception effect on the dust.The maximum error between the test value and the simulation result is 12.9%,which verifies the accuracy of the experimental results.The research results can provide theoretical guidance for the application of dust removal technology in coal mine.

Advancing respirable coal mine dust source apportionment:a preliminary laboratory exploration of optical microscopy as a novel monitoring tool

Exposure to respirable coal mine dust(RCMD)can cause chronic and debilitating lung diseases.Real-time monitoring capabilities are sought which can enable a better understanding of dust components and sources.In many underground mines,RCMD includes three primary components which can be loosely associated with three major dust sources:coal dust from the coal seam itself,silicates from the surrounding rock strata,and carbonates from the inert‘rock dust’products that are applied to mitigate explosion hazards.A monitor which can reliably partition RCMD between these three components could thus allow source apportionment.And tracking silicates,specifically,could be valuable since the most serious health risks are typically associated with this component-particularly if abundant in crystalline silica.Envisioning a monitoring concept based on field microscopy,and following up on prior research using polarized light,the aim of the current study was to build and test a model to classify respirable-sized particles as either coal,silicates,or carbonates.For model development,composite dust samples were generated in the laboratory by successively depositing dust from high-purity materials onto a sticky transparent substrate,and imaging after each deposition event such that the identity of each particle was known a priori.Model testing followed a similar approach,except that real geologic materials were used as the source for each dust component.Results showed that the model had an overall accuracy of 86.5%,indicating that a field-microscopy based moni-tor could support RCMD source apportionment and silicates tracking in some coal mines.

Ion acoustic solitary waves in an adiabatic dusty plasma:Roles of superthermal electrons,ion loss and ionization

We investigate propagation of dust ion acoustic solitary wave(DIASW)in a multicomponent dusty plasma with adiabatic ions,superthermal electrons,and stationary dust.The reductive perturbation method is employed to derive the damped Korteweg-de Vries(DKdV)equation which describes DIASW.The result reveals that the adiabaticity of ions significantly modifies the basic features of the DIASW.The ionization effect makes the solitary wave grow,while collisions reduce the growth rate and even lead to the damping.With the increases in ionization cross sectionΔσ/σ_(0),ion-to-electron density ratioδ_(ie)and superthermal electrons parameterκ,the effect of ionization on DIASW enhances.

Cooperative effect of sodium lauryl sulfate collector and sodium pyrophosphate depressant on the flotation separation of lead oxide minerals from hematite

As a cornerstone of the national economy,the iron and steel industry generates a significant amount of sintering dust containing both valuable lead resources and deleterious elements.Flotation is a promising technique for lead recovery from sintering dust,but efficient separation from Fe_(2)O_(3) is still challenging.This study investigated the cooperative effect of sodium lauryl sulfate(SLS,C_(12)H_(25)SO_(4)Na)and sodium pyrophosphate(SPP,Na_(4)P_(2)O_(7))on the selective flotation of lead oxide minerals(PbOHCl and PbSO_(4))from hematite(Fe_(2)O_(3)).Optimal flotation conditions were first identified,resulting in high recovery of lead oxide minerals while inhibiting Fe_(2)O_(3) flotation.Zeta potential measurements,Fourier transform infrared spectroscopy(FT-IR)analysis,adsorption capacity analysis,and X-ray photoelectron spectroscopy(XPS)studies offer insights into the adsorption behaviors of the reagents on mineral surfaces,revealing strong adsorption of SLS on PbOHCl and PbSO_(4) surfaces and remarkable adsorption of SPP on Fe_(2)O_(3).The proposed model of reagent adsorption on mineral surfaces illustrates the selective adsorption behavior,highlighting the pivotal role of reagent adsorption in the separation process.These findings contribute to the efficient and environmentally friendly utilization of iron ore sintering dust for lead recovery,paving the way for sustainable resource management in the iron and steel industry.

Snow and regolith albedo variations using CRISM data at McMurdo crater,Mars

The cryosphere component provides the most reliable and insightful indications of any planet’s climate dynamics.Using data from the Compact Reconnaissance Imaging Spectrometer for Mars(CRISM),we develop a novel approach to determining the broadband Visible and Near Infrared(VNIR)albedo of the Martian surface.This study focuses on albedo changes in the McMurdo crater,part of Mars’s south polar layer deposits.We compare seasonal and interannual variations of the McMurdo surface albedo before,during,and after the Global Dust Storm(GDS)of Martian Year(MY)34.As the seasons progressed from spring to summer,the mean albedo in MY 32 and 34 plunged by over 40%,by about 35%in MY 33,and by slightly more than 30%in MY 35.Compared interannually,however,mean albedo values within both seasons(spring and summer)exhibited no significant differences in those same years.Notably,interannual albedo difference maps reveal albedo variation of more than±0.3 in certain regions of the crater.Considering only snow-covered pixels,interannual albedo differences suggest that Mars dust had a pervasive impact on Mars’s cryosphere.Variations in maximum and minimum albedo values as high as 0.5 were observed,depending upon differences in the dust levels in Martian snow/ice.The maximum and the minimum snow albedo values were lowest in MY 34,indicating the effect of the intense dust storm event that year.The average snow albedo decreased from 0.45 in MY 32 to 0.40 in MY 33 and to 0.33 in MY 34,and then rose back to 0.40 in MY 35.This trajectory suggests a temporary deposition of dust,partially reversed after the GDS by self-cleaning mechanisms(local aeolian process and CO_(2)sublimation/deposition cycle).

Global dust density in two-dimensional complex plasma

The driven-dissipative Langevin dynamics simulation is used to produce a two-dimensional(2D) dense cloud, which is composed of charged dust particles trapped in a quadratic potential. A 2D mesh grid is built to analyze the center-to-wall dust density. It is found that the local dust density in the outer region relative to that of the inner region is more nonuniform,being consistent with the feature of quadratic potential. The dependences of the global dust density on equilibrium temperature, particle size, confinement strength, and confinement shape are investigated. It is found that the particle size, the confinement strength, and the confinement shape strongly affect the global dust density, while the equilibrium temperature plays a minor effect on it. In the direction where there is a stronger confinement, the dust density gradient is bigger.

Ecological problems and ecological restoration zoning of the Aral Sea

The Aral Sea was the fourth largest lake in the world but it has shrunk dramatically as a result of irrational human activities, triggering the "Aral Sea ecological crisis". The ecological problems of the Aral Sea have attracted widespread attention, and the alleviation of the Aral Sea ecological crisis has reached a consensus among the five Central Asian countries(Kazakhstan, Uzbekistan, Tajikistan, Kyrgyzstan, and Turkmenistan). In the past decades, many ecological management measures have been implemented for the ecological restoration of the Aral Sea. However, due to the lack of regional planning and zoning, the results are not ideal. In this study, we mapped the ecological zoning of the Aral Sea from the perspective of ecological restoration based on soil type, soil salinity, surface water, groundwater table, Normalized Difference Vegetation Index(NDVI), land cover, and aerosol optical depth(AOD) data. Soil salinization and salt dust are the most prominent ecological problems in the Aral Sea. We divided the Aral Sea into 7 first-level ecological restoration subregions(North Aral Sea catchment area in the downstream of the Syr Darya River(Subregion Ⅰ);artificial flood overflow area in the downstream of the Aral Sea(Subregion Ⅱ);physical/chemical remediation area of the salt dust source area in the eastern part of the South Aral Sea(Subregion Ⅲ);physical/chemical remediation area of severe salinization in the central part of the South Aral Sea(Subregion Ⅳ);existing water surface and potential restoration area of the South Aral Sea(Subregion Ⅴ);Aral Sea vegetation natural recovery area(Subregion Ⅵ);and vegetation planting area with slight salinization in the South Aral Sea(Subregion Ⅶ)) and 14 second-level ecological restoration subregions according to the ecological zoning principles. Implementable measures are proposed for each ecological restoration subregion. For Subregion Ⅰ and Subregion Ⅱ with lower elevations, artificial flooding should be carried out to restore the surface of the Aral Sea. Subregion Ⅲ and Subregion Ⅳ have severe salinization, making it difficult for vegetation to grow. In these subregions, it is recommended to cover and pave the areas with green biomatrix coverings and environmentally sustainable bonding materials. In Subregion Ⅴ located in the central and western parts of the South Aral Sea, surface water recharge should be increased to ensure that this subregion can maintain normal water levels. In Subregion Ⅵ and Subregion Ⅶ where natural conditions are suitable for vegetation growth, measures such as afforestation and buffer zones should be implemented to protect vegetation. This study could provide a reference basis for future comprehensive ecological management and restoration of the Aral Sea.

Separation of halogens and recovery of heavy metals from secondary copper smelting dust

The separation of halogens and recovery of heavy metals from secondary copper smelting(SCS)dust using a sulfating roasting−water leaching process were investigated.The thermodynamic analysis results confirm the feasibility of the phase transformation to metal sulfates and to gaseous HF and HCl.Under the sulfating roasting conditions of the roasting temperature of 250°C and the sulfuric acid excess coefficient of 1.8,over 74 wt.%of F and 98 wt.%of Cl were volatilized into flue gas.Approximately 98.6 wt.%of Zn and 96.5 wt.%of Cu in the roasting product were dissolved into the leaching solution after the water leaching process,while the leaching efficiencies of Pb and Sn were only 0.12%and 0.22%,respectively.The mechanism studies indicate the pivotal effect of roasting temperature on the sulphation reactions from various metal species to metal sulfates and the salting out reactions from various metal halides to gaseous hydrogen halides.

Radiation Spectral Analysis of 3D Dust Molecular Clusters(PAHs)and Peptoids under Ionization and Electric Field in ISM

Polycyclic aromatic hydrocarbons(PAHs),PANHs,and peptoids dust spectral calculations from the interstellar medium(ISM)are important for dust observations and theory.Our goal is to calculate the radiation spectrum of spherical PAHs dust clusters in a vacuum containing ionized and applied in the presence of an electric field.We propose a new simple computational model to calculate the size of three-dimensional spherical dust clusters formed by different initial dust structures.By the Vienna Ab-initio Simulation Package code,the density functional theory with the generalized approximation was used to calculate the electron density gradient and obtain the radiation spectrum of dust.When the radius of spherical dust clusters is~[0.009-0.042]μm,the dust radiation spectrum agrees well with the Z=0.02 mMMP stellar spectra,and the PAHs radiation spectrum of NGC 4676 at wavelengths of(0-5]μm and(5-10]μm,respectively.In the ionized state,the N-PAH,C_(10)H_(9)N,2(C_(4)H_(4))^(1+),and peptoids 4(CHON),(C_(8)H_(10)N_(2)O_(5))^(1+)dust clusters at 3.3μm,while the 2(C_(22)H_(21)N_(3)O_(2))^(1+),4(CHON)dust clusters at 5.2μm have obvious peaks.There is a characteristic of part of PAHs and peptoids clusters radiation at the nearinfrared wavelength of 2μm.However,especially after applying an electric field to the dust,the emission spectrum of the dust increases significantly in the radiation wavelength range[3-10]μm.Consequently,the dust clusters of PAHs,PANHs,and peptoids of the radius size~[0.009-0.042]μm are likely to exist in the ISM.