Procion MX Dyes在彩色蜡染制作工艺中的应用研究

文章以彩色蜡染制作工艺为研究对象,将文献研究法与实践相结合,从画蜡技巧、上色与固色原理、艺术表现技巧等方面解读Procion MX Dyes在彩色蜡染制作工艺中的应用原则和技巧。借助Procion MX Dyes的应用,提升了彩色蜡染的艺术表现力和使用价值,为蜡染产业的发展提供了可行性参考。

Co-colouration Effects in the Systems of Metal(Ⅱ)-Rare Earth(Ⅲ)-Xanthene Dye and Their Influences on Photometric Determination of Metal Ions

After comparing the influences of each rare earth(Ⅲ),11 species of metal(Ⅱ)and 8 species of acidic triphenylmethane dye on the formation of coloured coordination compound in the system of Metal(Ⅱ)-RE (Ⅲ)-Dye,it was proven that the co-colouration effect can be caused only by the xanthene dyes(XD)con- taining substituting hydroxy.group on the ortho-position of etheric oxygen group.Besides,the radius of met- al(Ⅱ)must not be smaller than a definite limit;otherwise,no co-colouration appears.Furthermore,the acid- ity of medium is another important factor to affect co-colouration,Bromopyrogallol red causes co-colouration of Pb(Ⅱ)-RE(Ⅲ)only,owing to its higher chromophoric acidity;while alizarin violet causes co-colouration of M(Ⅱ)-RE(Ⅲ)(M=Pb,Ca,Sr and Ba),due to its lower chromophoric acidity.The condi- tions causing co-colouration,the regularities of co-colouration and the influences of co-colouration in photometric determination of metals were discussed.

Intraspecific floral colour variation in three Pedicularis species

Flower constancy describes the phenomenon that pollinators tend to successively visit flowers of a single species during foraging,reducing reproductive interference in natural communities.The extent of flower constancy is largely determined by the floral traits of co-flowering species.Both higher inter-specific and lower intraspecific differences of floral traits should contribute to a higher level of flower constancy.However,previous studies mainly focused on interspecific difference,and the intraspecific variation(consistency)of floral traits received much less attention.We hypothesise that selection may favour lower intraspecific floral trait variation in communities composed of multiple co-flowering congeners.We investigated the floral colour variation of three focal Pedicularis species that share pollinators in 19communities composed of either single or multiple Pedicularis species.Colour was quantified using image-based colour analysis as perceived by pollinators.We found that most of the intrapopulation floral colour variation was below the colour discrimination threshold of bumblebees,implying strongly constrained by the visual selection by pollinators.Contrary to the hypothesis,there is no significant difference in intraspecific floral colour variation between different community contexts.It may be due to the relatively large interspecific floral colour differences of most co-flowering species.The influence of community context on intraspecific variation may be reflected in floral traits other than colours.

Progress in the research on organic piezoelectric catalysts for dye decomposition

Organic contaminants have posed a direct and substantial risk to human wellness and the environment.In recent years,piezo-electric catalysis has evolved as a novel and effective method for decomposing these contaminants.Although piezoelectric materials offer a wide range of options,most related studies thus far have focused on inorganic materials and have paid little attention to organic materi-als.Organic materials have advantages,such as being lightweight,inexpensive,and easy to process,over inorganic materials.Therefore,this paper provides a comprehensive review of the progress made in the research on piezoelectric catalysis using organic materials,high-lighting their catalytic efficiency in addressing various pollutants.In addition,the applications of organic materials in piezoelectric cata-lysis for water decomposition to produce hydrogen,disinfect bacteria,treat tumors,and reduce carbon dioxide are presented.Finally,fu-ture developmental trends regarding the piezoelectric catalytic potential of organic materials are explored.

Monitoring Xylem Transport in the Stem of Lilium lancifolium Using Fluorescent Dye 5(6)-Carboxyfluorescein Diacetate

The xylem undergoes physiological changes in response to various environmental conditions during the process of plant growth.To understand these physiological changes,it is extremely important to observe the transport of xylem.In this study,the distribution and structure of vascular bundle in Lilium lancifolium were observed using the method of semithin section.Methods for introducing a fluorescent tracer into the xylem of the stems were evaluated.Then,the transport rule of 5(6)-Carboxyfluorescein diacetate(CFDA)in the xylem of the stem of L.lancifolium was studied by fluorescence dye in live cells tracer technology.The results showed that the vascular bundles of L.lancifolium were scattered in the basic tissue,the peripheral vascular bundles were smaller and densely distributed,and the closer to the center,the larger the volume of vascular bundles and the more sparsely distributed.The vascular bundles of L.lancifolium are limited external tenacity vascular bundles,which are composed of phloem and xylem.The most suitable method for CFDA labeling the xylem of isolated stem segments of L.lancifolium was solution soaking for 24 h.The running speed of CF in the isolated stem was 0.3 cm/h,which was consistent with the running speed of the material in the field.CF could be transported between the xylem and parenchyma cells,indicating that the material transport in the xylem could be through the symplastic pathway.The above results laid a foundation for the study of the xylem transport mechanism and the xylem pathogen disease of lily.

Textile dyeing wastewater negatively influences the hematological profile and reproductive health of male Swiss albino mice

Objective:To determine the effects of textile dyeing industrial wastewater on the hematological parameters and reproductive health including histoarchitecture of male gonad(testes)of mice.Methods:Twenty-four Swiss albino mice at 4-weeks old were divided into four groups(n=6 per group).Mice of group 1 supplied with normal drinking water were served as the control group.Mice of group 2,3 and 4 were supplied normal drinking water mixed with textile dyeing wastewater at 5%,10% and 20% concentration,respectively.After completing 24 weeks of treatment,different hematological profile,weight of testes,gonadosomatic index(GSI),sperm concentration and morphology were measured.Moreover,histopathological changes in testes were examined.Results:Hematocrit value and hemoglobin concentrations were decreased in all groups of wastewater-treated mice compared to the control group.Likewise,weight of testes,GSI and sperm concentration were decreased significantly in wastewater-treated mice in comparison to the control group.The percentage of morphologically healthy epididymal sperm was significantly reduced in wastewater-treated mice.Histopathological examination revealed degenerative changes in seminiferous tubules,a smaller number of spermatogenic cells,elongation of seminiferous tubules and degenerative changes of seminiferous tubules in wastewater-treated mice.Conclusions:Textile dyeing wastewater has harmful effects on hematological profile and reproductive health of male mice.

Bioremediation of Textile Azo Dyes Amido Black 10B, Reactive Black 5, Reactive Blue 160 by Lentinus squarrosulus AF5 and Assessment of Toxicity of the Degraded Metabolites

Bioremediation is an eco-compatible and economical approach to counter textile dye menace. The isolated Lentinus squarrosulus AF5 was assessed for decolourization of textile azo dyes, and had shown ~93%, 88% and 70% decolorization of Reactive blue 160 (RB160), Reactive black 5 (RB5) and Amido black 10B (AB10B) respectively. Further analysis using UV-vis, HPLC, and FTIR, 1H NMR had shown the degradation of the dyes. Toxicity analysis of the metabolites was performed using seed germination and plant growth on two agriculturally important plants Guar (Cyamopsis tetragonoloba) and wheat (Triticum aestivum) as well as cytotoxicity analysis using the human keratinocyte cell line (HaCaT). The dye mix appeared inhibitory for seed germination (20% - 40%), whereas metabolites were non-inhibitory for germination. Treatment of HaCaT cells with of dye mix and metabolites led into 45% and ~100% of cell viability of HaCaT cells respectively. Therefore, metabolites following degradation of the dye mix were observed to be non-toxic.

Progress and prospects of Mg-based amorphous alloys in azo dye wastewater treatment

Mg-based amorphous alloys exhibit efficient catalytic performance and excellent biocompatibility with a promising application probability,specifically in the field of azo dye wastewater degradation.However,the problems like difficulty in preparation and poor cycling stability need to be solved.At present,Mg-based amorphous alloys applied in wastewater degradation are available in powder and ribbon.The amorphous alloy powder fabricated by ball milling has a high specific surface area,and its reactivity is thousands of times better than that of gas atomized alloy powder.But the development is limited due to the high energy consumption,difficult and costly process of powder recycling.The single roller melt-spinning method is a new manufacturing process of amorphous alloy ribbon.Compared to amorphous powder,the specific surface area of amorphous ribbon is relatively lower,therefore,it is necessary to carry out surface modification to enhance it.Dealloying is a way that can form a pore structure on the surface of the amorphous alloys,increasing the specific surface area and providing more reactive sites,which all contribute to the catalytic performance.Exploring the optimal conditions for Mg-based amorphous alloys in wastewater degradation by adjusting amorphous alloy composition,choosing suitable method to preparation and surface modification,reducing cost,expanding the pH range will advance the steps to put Mg-based amorphous alloys in industrial environments into practice.

Tannins from Acacia mangium Bark as Natural Dyes for Textiles:Characteristics and Applications

Tannins are capable of producing natural dyes with antioxidant and antibacterial propertis,while synthetic dyes are commonly used in the textile industry,causing environmental issues like water pollution.This research aims to utilize waste tannins as natural dyes as an alternative to synthetic dyes.This study examined the effect of the extraction method on tannin properties such as phenolic content,antioxidants,and antibacterial activity.In addition,Pyrolysis Gas Chromatography‒Mass Spectrometry(Py-GCMS)analysis was used to identify the effect of extraction temperature on the chemical elucidation of tannin.The effect of tannin concentration was evaluated against four bacteria that are usually found on human skin:Staphylococcus epidermidis,Bacillus subtilis,Propionibacterium acnes,and Staphylococcus aureus.Extraction temperature significantly influences the chemical composition of tannin,which leads to different antioxidant properties.The maximum antibacterial properties of tannin were obtained at 90℃with the inhibition zone in the range of 0.9–1.0 mm against four bacteria,tannin yield of 26.59%,Gallic Acid Equivalents or total phenolic content(GAE)of 40.30 mg/g,and Radical Scavenging Activity or antioxidant activity(RSA)of 89.88%.Moreover,the concentration of tannin was significantly linear with its antibacterial properties.Tannin was successfully applied to the textile by using alum as a mordanting agent to create an antibacterial textile.The textile’s bacterial structure damage was analyzed under Field Emission Scanning Electron Microscopy(FESEM).After 50 washings,tannin-textiles with alum-modified properties remained stable compared to those without alum,with S.aureus and S.epidermidis being the most vulnerable bacteria,as confirmed by FESEM images.Hence,tannin is a feasible alternative to harmful and nondegradable synthetic dyes and antibacterial agents.

Integrated adsorption and photocatalytic removal of methylene blue dye from aqueous solution by hierarchical Nb_(2)O_(5)@PAN/PVDF/ANO composite nanofibers

This work presents the development of hierarchical niobium pentoxide(Nb_(2)O_(5))-based composite nanofiber membranes for integrated adsorption and photocatalytic degradation of methylene blue(MB)pollutants from aqueous solutions.The Nb_(2)O_(5) nanorods were vertically grown using a hydrothermal process on a base electrospun nanofibrous membrane made of polyacrylonitrile/polyvinylidene fluoride/ammonium niobate(V)oxalate hydrate(Nb_(2)O_(5)@PAN/PVDF/ANO).They were characterized using field-emission scanning electron microscopy(FE-SEM),X-ray diffraction(XRD)analysis,and Fourier transform infrared(FTIR)spectroscopy.These composite nanofibers possessed a narrow optical bandgap energy of 3.31 eV and demonstrated an MB degradation efficiency of 96%after 480 min contact time.The pseudo-first-order kinetic study was also conducted,in which Nb_(2)O_(5)@PAN/PVDF/ANO nanofibers have kinetic constant values of 1.29×10^(-2) min^(-1) and 0.30×10^(-2) min^(-1) for adsorption and photocatalytic degradation of MB aqueous solutions,respectively.These values are 17.7 and 7.8 times greater than those of PAN/PVDF/ANO nanofibers without Nb_(2)O_(5) nanostructures.Besides their outstanding photocatalytic performance,the developed membrane materials exhibit advantageous characteristics in recycling,which subsequently widen their practical use in environmental remediation applications.

Enhanced Dye Adsorption and Bacterial Removal of Magnetic Nanoparticle-Functionalized Bacterial Cellulose Acetate Membranes

Utilizing biomass waste as a potential resource for cellulose production holds promise in mitigating environmental consequences.The current study aims to utilize pineapple biowaste extract in producing bacterial cellulose acetate-based membranes with magnetic nanoparticles(Fe_(3)O_(4)nanoparticles)through the fermentation and esterification process and explore its characteristics.The bacterial cellulose fibrillation used a high-pressure homogenization procedure,and membranes were developed incorporating 0.25,0.50,0.75,and 1.0 wt.%of Fe3O4 nanoparticles as magnetic nanoparticle for functionalization.The membrane characteristics were measured in terms of Scanning Electron Microscope,X-ray diffraction,Fourier Transform Infrared,Vibrating Sample Magnetometer,antibacterial activity,bacterial adhesion and dye adsorption studies.The results indicated that the surface morphology of membrane changes where the bacterial cellulose acetate surface looks rougher.The crystallinity index of membrane increased from 54.34%to 68.33%,and the functional groups analysis revealed that multiple peak shifts indicated alterations in membrane functional groups.Moreover,adding Fe_(3)O_(4)-NPs into membrane exhibits paramagnetic behavior,increases tensile strength to 73%,enhances activity against E.coli and S.aureus,and is successful in removing bacteria from wastewater of the river to 67.4%and increases adsorption for anionic dyes like Congo Red and Acid Orange.

Matching Dyeing and Properties of Silk Fabrics with Natural Edible Pigments

The silk fabrics were matching dyed with three natural edible pigments(red rice red,ginger yellow and gardenia blue).By investigating the dyeing rates and lifting properties of these pigments,it was observed that their compatibilities were excellent in the dyeing process:dye dosage 2.5%(omf),mordant alum dosage 2.0%(omf),dyeing temperature 80℃and dyeing time 40 min.The silk fabrics dyed with secondary colors exhibited vibrant and vivid color owing to the remarkable lightness and chroma of ginger yellow.However,gardenia blue exhibited multiple absorption peaks in the visible light range,resulting in significantly lower lightness and chroma for the silk fabrics dyed with tertiary colors,thus making it suitable only for matte-colored fabrics with low chroma levels.In addition,the silk fabrics dyed with these three pigments had a color fastness that exceeded grade 3 in resistance to perspiration,soap washing and light exposure,indicating acceptable wearing properties.The dyeing process described in this research exhibited a wide range of potential applications in matching dyeing of protein-based textiles with natural colorants.

Blue Calico Printing and Dyeing Craft in Tongxiang

BLUE calico is a traditional Chinese handmade printed fabric.Dyed in indigo,it has a blue base with white patterns.Tongxiang,a city in east China’s Zhejiang Province,is well-known for printing and dyeing blue calico.The craft boasts a history of a millennium in the town with its heyday in the Tang(618-907)and Song(960-1279)dynasties.The technique was widely applied by the general public during the Ming and Qing dynasties(1368-1911).

Biocatalytic enhancement of laccase immobilized on ZnFe_(2)O_(4) nanoparticles and its application for degradation of textile dyes

Efficient and convenient treatment of industrial dyeing wastewater is of great significance to guarantee human and animal health.This work presented the enhanced catalytic activity at pH 3.0 of laccase immobilized on amino-functionalized ZnFe_(2)O_(4) nanoparticles(ZnFe_(2)O_(4)-laccase)and its application for the degradation of textile dyes.Due to the existence of a large number of oxygen vacancies on the surface of the ZnFe_(2)O_(4) nanoparticles,negative ions accumulated on the magnetic carriers,which resulted in a harsh optimal pH value of the ZnFe_(2)O_(4)-laccase.Laccase activity assays revealed that the ZnFe_(2)O_(4)-laccase possessed superior pH and thermal stabilities,excellent reusability,and noticeable organic solvent tolerance.Meanwhile,the ZnFe_(2)O_(4) laccase presented efficient and sustainable degradation of high concentrations of textile dyes.The initial decoloration efficiencies of malachite green(MG),brilliant green(BG),azophloxine,crystal violet(CV),reactive blue 19(RB19),and procion red MX-5B were approximately 99.1%,95.0%,93.3%,87.4%,86.1%,and 85.3%,respectively.After 10 consecutive reuses,the degradation rates of the textile dyes still maintained about 98.2%,92.5%,83.2%,81.5%,79.8%and 65.9%,respectively.The excellent dye degradation properties indicate that the ZnFe_(2)O_(4)-laccase has a technical application in high concentrations of dyestuff treatment.

Removal of Dye Using Lignin-Based Biochar/Poly(ester amide urethane)Nanocomposites from Contaminated Wastewater

The pursuit of incorporating eco-friendly reinforcing agents in polymer composites has accentuated the exploration of various natural biomass-derived materials.The burgeoning environmental crisis spurred by the discharge of synthetic dyes into wastewater has catalyzed the search for effective and sustainable treatment technologies.Among the various sorbent materials explored,biochar,being renewable,has gained prominence due to its excellent adsorption properties and environmental sustainability.It has also emerged as a focal point for its potential to replace other conventional reinforcing agents,viz.,fumed silica,aluminum oxide,treated clays,etc.This study introduces a novel class of polymer nanocomposites comprising of lignin-based biochar particles and poly(ester amide urethane)matrix via a feasible method.The structural evaluation of these nanocomposites was accomplished using Fourier-transform infrared spectroscopy,X-ray photoelectron spectroscopy,and powder X-ray diffraction.The polymer nanocomposites exhibited superior mechanical properties with an increment in tensile strength factor by 45%in comparison to its pristine matrix,along with an excellent toughness value of 90.22 MJm^(−3)at a low loading amount of only 1 wt%.The composites showed excellent improvement in thermal properties with a sharp rise in the glass transition temperature(Tg)value from−28.15℃to 84℃,while also championing sustainability through inherent biodegradability attributes.Beyond their structural prowess,these polymer nanocomposites demonstrated excellent potential as adsorbents,displaying efficient removal of malachite green and tartrazine dyes from aqueous systems with a removal efficiency of 87.25%and 73.98%,respectively.The kinetics study revealed the pseudo second order model to be the precision tool to assess the dye removal study.Complementing this,the Langmuir adsorption isotherm provided a framework to assess the sorption features of the polymer nanocomposites.Overall,these renewable biochar integrated polymer matrices boast remarkable recovery capabilities up to seven cycles of usage with an excellent dye recovery percentage of 95.21%for the last cycle,thereby defining sustainability as well as economic feasibility.

Textile industry innovations in dyeing and finishing processes:Minimizing environmental impact

Textiles are one of the oldest industries in the world which has been manufacturing fabrics and materials needed for various purposes.However,the industry has been confronted with some problems regarding its pollution;specifically the dyeing and finishing processes.As for the given issues,there has been a trend in recent years to come up with more environmentally friendly solutions.

The Evaluation of the Dietary Habits Influence on the Microhardness of Gingiva-Coloured Composite and Acrylic Denture Base Materials

Purpose: The study investigated the impact of dietary habits, specifically soda, milk kefir, water kefir, almond milk, and distilled water (control) consumption, on the microhardness of gingiva-coloured composite and acrylic denture bases. Methods: Materials included gingiva-coloured composite (Fusion Universal G1), acrylic (Imicryl), and subdivided Procryla group. Subgroups comprised 15 and 30-minute heat polymerized (Pro15, Pro30), and 1 wt% (Pro1Z) and 3 wt% (Pro3Z) zirconium added groups. Immersed in beverages for 1, 7, and 14 days, pH and microhardness were assessed. SEM examined random samples. Statistical analysis used repeated measures ANOVA, and post hoc tests (p Results: The gingiva-coloured composites displayed noteworthy time-associated microhardness changes (p 0.05). Despite variable pH levels in beverages, no substantial group interaction effects were observed (p > 0.05). Initial microhardness rankings shifted after a 14-day immersion. Conclusions: Gingiva-coloured composite exhibited the highest microhardness pre- and post-immersion, followed by Procryla30 and Imicryl groups. .

Synthesis and Characterization of Novel Schiff Base for Enhanced Dye-Sensitized Solar Cell Photo-Response Mechanism

The efficient photo-response mechanism is one of the key factors in the commercialization of dye-sensitized solar cells in a bid to satisfy renewable energy demands. Progress in green technology has put solar energy on the front burner as a provider of clean and affordable energy for a sustainable society. We report the synthesis of a novel Schiff base with optical transparency in the visible and near IR region of the solar spectrum that can find application in the DSSCs photo-response mechanism. The synthesized crystal exhibited features that could handle some of the shortcomings of dye-sensitized solar cells which include wide band solar spectrum absorption and capability for swift charge transfer within the photoelectrodes. The synthesized Schiff base was characterized using x-ray diffractometer, UV/Visible spectrometer, Frontier transmission infrared spectrometer and conductometer. XRD data revealed the grown crystal to have an average crystallite size of 2.08 nm with average microstrain value of about 269.43. The FT-IR recorded transmission wave ѵ (CO) at 1207.7 cm−1 while dominant wave occurred at ѵ1654.9 and ѵ1592.3 cm−1 relating to ѵ (CN) stretching and ѵ (NH) bending respectively were observed. The IR spectrum revealed the bonding species and a probable molecular structure of 2,6-bis(benzyloxy)pyridine. The UV/Visible spectra convoluted to maximum peak within the near IR region suggesting that 2,6-bis(benzyloxy)pyridine can absorb both the visible and near IR region while its electrical conductivity was determined to be 4.58 µS/cm. The obtained result of the present study revealed promising characteristics of a photosensitizer that can find application in the photo-response mechanism of DSSCs.

Colour Removal from Aqueous Solutions of the Reactive Azo Dye Remazol Black B Using the Immobilised Cells (Shewanella Strain J18 143) –Cellulose-g.co-Monomer System

Consideration is given here to colour removal, carried out using immobilised biological cells, Shewanella strain J18 143. In order to provide greater control of an overall colour removal process and to give a basis for the effective recovery of the cell culture species, cell immobilisation has been established on chemically modified cellulose. The modification was achieved by chemically inducing the graft copolymerisation of methacrylic acid onto cotton fabric. The immobilised cells were able to decolorise the dye. The immobilisation methods, physical adsorption, “growing-in” and chemical coupling, were compared. Each of the methods was effective to some extent. However, the latter two immobilisation methods provided the greater effect in decoloration. Each of these immobilised systems is relatively simple to achieve, whether by adsorption, physical interlocking or covalent coupling. The graft copolymer is able to offer versatility in use. The decoloration was shown to be rapid under relatively simple processing conditions. Thus, compared with the established controls, complete decoloration of solutions of Remazol Black B was observed. The potential use of the graft copolymer substrate as support for a biochemical agent was confirmed.

RESEARCH ON FACTORS AFFECTING THE COLOURATION OF RED GLASS-CERAMICS

In this pater, effect of alkali, zinc oxide and colorants such as cadmiun sulfide and selenium powder on the colouration of the red glass-ceramic materials in the CaO-Al2O3-SiO2 system has been studied. The relevant laws have been presented and analyzed.