Investigation of Electrical Parameters of Fresh Water and Produced Mixed Injection in High-Salinity Reservoirs

Assuming a reservoir with a typical salt-lake background in the Qaidam Basin as a testbed,in this study the var-iation law of the rock electrical parameters has been determined through water displacement experiments with different salinities.As made evident by the results,the saturation index increases with the degree of water injec-tion.When the salinity of the injected water is lower than 80000 ppm,the resistivity of the rock samplefirst decreases,then it remains almost constant in an intermediate stage,andfinally it grows,thereby giving rise to a‘U’profile behavior.As the salinity decreases,the water saturation corresponding to the inflection point of the resistivity becomes lower,thereby leading to a wider‘U’type range and a higher terminal resistivity.For dif-ferent samples,higher initial resistivity of the sample in the oil-bearing state,and higher resistivity after low-sali-nity water washing are obtained when a thicker lithology is considered.

Carbon nanotube enhanced water-based drilling fluid for high temperature and high salinity deep resource development

Drilling fluids face failure during drilling deep reservoir with high temperature and high salt.The experimental results show that high temperature and salinity reduce the negative charge on the surface of bentonite in the drilling fluid and cause the coalescence of bentonite particles.As a result,the particles coalesce,the grid structure is destroyed,and the rheological properties,rock-carrying capacity and filtration properties are lost.To resolve the foregoing,in this study,0.05-wt%carbon nanotubes are introduced into a 4%bentonite drilling fluid under conditions where the temperature and concentration of added Na Cl reach 180°C and 10 wt%,respectively.The carbon nanotubes adsorb on the bentonite surface and increase the space among bentonite particles.The steric hindrance prevents the coalescence of bentonite in high temperature and high salt environment.Thus bentonite maintains the small size distribution of bentonite and supports the bentonite grid structure in the drilling fluid.As a result,the rock-carrying capacity of the drilling fluid increases by 85.1%.Moreover,the mud cake formed by the accumulation of small-sized bentonite particles is dense;consequently,the filtration of bentonite drilling fluid reduced by 30.2%.

Study on Influencing Factors and Kinetics of Removal of Ammonia Nitrogen from High Salinity Wastewater by Sodium Hypochlorite Oxidation

The influencing factors and kinetics of oxidative degradation of ammonia nitrogen in high salinity wastewater by sodium hypochlorite oxidation( Na Cl O) were studied. The results showed that the degradation process of ammonia nitrogen by sodium hypochlorite accorded with a pseudo first-order kinetics model,and the influencing factors included Na Cl O dosage,initial concentration of ammonia nitrogen,salinity,temperature,and so on. When Na Cl O dosage was 0. 6%( MCl∶ MN= 13. 76),the reaction rate constant was up to 0. 015 75 min^(-1). The higher the initial concentration of ammonia nitrogen was,the worse the effect of oxidation reaction was. When the initial concentration did not exceed 45 mg/L,the effect on oxidation reaction rate constant increased with the increase of the initial concentration. Low salinity had no effect on ammonia nitrogen oxidation.When salinity was higher than 2. 0%,the inhibition effect on ammonia nitrogen oxidation would increase,and the reaction rate constant decreased obviously with the increase of salinity. The improvement of reaction temperature was beneficial to ammonia oxidation degradation. As temperature increased from 10 to 35 ℃,the reaction rate constant rose from 0. 00188 to 0. 01043 min^(-1).

Low organic matter abundance and highly efficient hydrocarbon generation of saline source rock in the Qaidam Basin,NW China

The geochemical analysis and experimental simulation are comprehensively used to systematically study the hydrocarbon generation material,organic matter enrichment and hydrocarbon generation model of Paleogene source rock in the Western Qaidam Depression,Qaidam Basin,NW China.Three main factors result in low TOC values of saline lacustrine source rock of the Qaidam Basin:relatively poor nutrient supply inhibits the algal bloom,too fast deposition rate causes the dilution of organic matter,and high organic matter conversion efficiency causes the low residual organic carbon.For this type of hydrogen-rich organic matter,due to the reduction of organic carbon during hydrocarbon generation,TOC needs to be restored based on maturity before evaluating organic matter abundance.The hydrocarbon generation of saline lacustrine source rocks of the Qaidam Basin is from two parts:soluble organic matter and insoluble organic matter.The soluble organic matter is inherited from organisms and preserved in saline lacustrine basins.It generates hydrocarbons during low-maturity stage,and the formed hydrocarbons are rich in complex compounds such as NOS,and undergo secondary cracking to form light components in the later stage;the hydrocarbon generation model of insoluble organic matter conforms to the traditional“Tissot”model,with an oil generation peak corresponding to Ro of 1.0%.

Formation and Transportation of High-Salinity Water Produced in Polynyas South of the St.Lawrence Island

The authors studied variations of temperature and salinity in seawater under sea ice using hydrologic data collected from polynyas south of the St.Lawrence Island during March of 2008 and 2009.The results indicate that the high-salinity water found during the cruises of 2008 and 2009 was due to the formation of polynyas.The salinity observed in 2008 was higher than that in 2009 as a result of higher salt production in 2008.The spatial distributions of high-salinity cores differed between the two cruises.In March 2008, a southeastward flow was formed under the persistent northerly wind in the observation region, which transported the high-salinity water produced by the polynyas to the southeast.The similar flow, however, did not exist in March 2009 because the northerly wind over the study area was interrupted by a southerly wind.Accordingly, the polynyas and the high-salinity water pro-duced by them existed for a short time.As a result, the high-salinity water in 2009 did not spread very far, and stayed within the polynyas.In addition, during the 2009 cruise, two stages of observations in the polynyas showed the core of high-salinity water was shifted to the southwest of the St.Lawrence Island.This result suggested that a southwestward flow might have existed in the area at the onset of the northerly wind, which was consistent with the alongshore and/or offshore flows caused by the northerly wind.

A novel polymer gel with high-temperature and high-salinity resistance for conformance control in carbonate reservoirs

Plugging agents have been widely used to enhance oil recovery in fractured-vuggy carbonate reservoirs.However,the harsh conditions of fractured-vuggy carbonate reservoirs yield a significant challenge in maintaining a long-term stabilization of plugging agents.In this work,we developed an anti-hightemperature and high-salinity polymer gel(APG)with excellent resistance to high temperature(140℃)and ultra-high salinity(240000 mg/L).The rheology and microstructure of APG were characterized before and after gelation.Core plugging tests on fractured cubic cores were conducted to quantify the plugging performance of the gel system.Experimental results showed that the Sclerglucan and Cobalt(Ⅱ)Chloride Hexahydrate filled the three-dimensional(3-D)network with various morphologies,providing extra protection to the cross-linking points of the 3D network structure of APG and thus,leading to a prolongation of the dehydration time.The dehydration rate of APG was only 5%within 30days,and the strength of APG could be maintained at a rigid or near-rigid level over 150 days.Moreover,APG exhibited satisfactory shear and scour resistance.Core plugging tests showed that APG could achieve a plugging rate of 90%and demonstrate ignorable minor damage to the substrate.Our results indicate that APG can serve as a great candidate in channel plugging in fractured-vuggy carbonate reservoirs where fractures are fully developed.

Highly Efficient Power Conversion from Salinity Gradients with Ion-Selective Polymeric Nanopores

A polymeric nanopore membrane with selective ionic transport has been proposed as a potential device to convert the chemical potential energy in salinity gradients to electrical power. However, its energy conversion efficiency and power density are often limited due to the challenge in reliably controlling the size of the nanopores with the conventional chemical etching method. Here we report that without chemical etching, polyimide （PI） membranes irradiated with GeV heavy ions have negatively charged nanopores, showing nearly perfect selectivity for cations over anions, and they can generate electrical power from salinity gradients. We further demonstrate that the power generation efficiency of the PI membrane approaches the theoretical limit, and the maximum power density reaches 130m W/m2 with a modified etching method, outperforming the previous energy conversion device that was made of polymeric nanopore membranes.

Low-tension gas process in high-salinity and low-permeability reservoirs

Polymer-based EOR methods in low-permeability reservoirs face injectivity issues and increased fracturing due to near wellbore plugging,as well as high-pressure gradients in these reservoirs.Polymer may cause pore blockage and undergo shear degradation and even oxidative degradation at high temperatures in the presence of very hard brine.Low-tension gas(LTG) flooding has the potential to be applied successfully for low-permeability carbonate reservoirs even in the presence of high formation brine salinity.In LTG flooding,the interfacial tension between oil and water is reduced to ultra-low values(10^-3 dyne/cm) by injecting an optimized surfactant formulation to maximize mobilization of residual oil post-waterflood.Gas(nitrogen,hydrocarbon gases or C02) is co-injected along with the surfactant slug to generate in situ foam which reduces the mobility ratio between the displaced(oil) and displacing phases,thus improving the displacement efficiency of the oil.In this work,the mechanism governing LTG flooding in low-permeability,high-salinity reservoirs was studied at a microscopic level using microemulsion properties and on a macroscopic scale by laboratory-scale coreflooding experiments.The main injection parameters studied were injected slug salinity and the interrelation between surfactant concentration and injected foam quality,and how they influence oil mobilization and displacement efficiency.Qualitative assessment of the results was performed by studying oil recovery,oil fractional flow,oil bank breakthrough and effluent salinity and pressure drop characteristics.

Enhanced Biodegradation of High-Salinity and Low- Temperature Crude-Oil Wastewater by Immobilized Crude-Oil Biodegrading Microbiota

High salt and low temperature are the bottlenecks for the remove of oil contaminants by enriched crude-oil degrading microbiota in Liaohe Estuarine Wetland(LEW),China.To improve the performance of crude-oil removal,microbiota was further immobilized by two methods,i.e.,sodium alginate(SA),and polyvinyl alcohol and sodium alginate(PVA+SA).Results showed that the crude oil was effectively removed by the enrichment with an average degrading ratio of 19.42-31.45 mg(L d)^(−1).The optimal inoculum size for the n-alkanes removal was 10%and 99.89%.Some members of genera Acinetobacter,Actinophytocola,Aquabac-terium,Dysgonomonas,Frigidibacter,Sphingobium,Serpens,and Pseudomonas dominated in crude-oil degrading microflora.Though the removal efficiency was lower than free bacteria when the temperature was 15℃,SA and PVA+SA immobilization im-proved the resistance to salinity.The composite crude-oil degrading microbiota in this study demonstrated a perspective potential for crude oil removal from surface water under high salinity and low temperature conditions.

Performance and Modeling of an Up-flow Anaerobic Sludge Blanket(UASB) Reactor for Treating High Salinity Wastewater from Heavy Oil Production

In this study,an up-flow anaerobic sludge blanket(UASB) reactor was applied to treat the high salinity wastewater from heavy oil production process.At a HRT of ≥24 h,the COD removal reached as high as 65.08% at an influent COD ranging from 350mg/L to 640mg/L.An average of 74.33% oil reduction was also achieved in the UASB reactor at an initial oil concentration between 112mg/L and 205mg/L.These results indicated that this heavy oil production related wastewater could be degraded efficiently in the UASB reactor.Granular sludge was formed in this reactor.In addition,two models,built on the back propagation neural network(BPNN) theory and linear regression techniques were developed for the simulation of the UASB system performance in the oily wastewater biodegradation.The average error of COD and oil removal was-0.65% and 0.84%,respectively.The results indicated that the models built on the BPNN theory were wellfitted to the detected data,and were able to simulate and predict the removal of COD and oil by the UASB reactor.

Analysis of evaporation of high-salinity phreatic water at a burial depth of 0 m in an arid area

High-salinity phreatic water refers to which with total dissolved solids（TDS）>30 g/L. Previous studies have shown that high salinity phreatic water evaporation is different at different depths. High salinity phreatic water evaporation under 0 m depth is the basis of the high salinity phreatic water evaporation studies. In this study, evaporation of high-salinity phreatic water at a burial depth of 0 m in arid area was investigated. New insights were gained on evaporation mechanisms via experiments conducted on high-salinity phreatic water with TDS of 100 g/L at 0 m at the study site at Changji Groundwater Balance Experiment Site, Xinjiang Uygur Autonomous Region in China, where the lithology of the vadose（unsaturated zone） was silty clay. Comparison was made on the data of high-salinity phreatic water evaporation, water surface evaporation(EΦ20) and meteorological data obtained in two complete hydrological years from April 1, 2012 to March 31, 2014. The experiments demonstrated that when the lithology of the vadose zone is silty clay, the burial depth is 0 m and the TDS is 100 g/L, intra-annual variation of phreatic water evaporation is the opposite to the variation of atmospheric evaporation EΦ20 and air temperature. The salt crust formed by the evaporation of high-salinity phreatic water has a strong inhibitory effect on phreatic water evaporation. Large volumes of precipitation can reduce such an inhibitory effect. During freezing periods, surface snow cover can promote the evaporation of high-salinity phreatic water at 0 m; the thicker the snow cover, the more apparent this effect is.

Modeling geologically abrupt climate changes in the Miocene: Potential effects of high-latitudinal salinity changes

The cooling of the Cenozoic, including the Miocene epoch, was punctuated by many geologically abrupt warming and cooling episodes— strong deviations from the cooling trend with time span of ten to hundred thousands of years. Our working hypothesis is that some of those warming episodes at least partially might have been caused by dynamics of the Antarctic Ice Sheet, which, in turn, might have caused strong changes of sea surface salinity in the Miocene Southern Ocean. Feasibility of this hypothesis is explored in a series of offline-coupled ocean-atmosphere computer experiments. The results suggest that relatively small and geologically short-lived changes in freshwater balance in the Southern Ocean could have significantly contributed to at least two prominent warming episodes in the Miocene. Importantly, the scenario-based experiments also suggest that the Southern Ocean was more sensitive to the salinity changes in the Miocene than today, which can attributed to the opening of the Central American Isthmus as a major difference between the Miocene and the present-day ocean-sea geometry.

Effect of high salinity on cell growth and protein production of Antarctic ice microalgae Chlamydomonas sp. ICE-L

Antarctic ice microalgae Chlamydomonas sp.ICE-L can survive and thrive in Antarctic sea ice.In this study,Chlamydomonas sp.ICE-L could survive at the salinity of 132‰ NaCl.SDS-PAGE showed that the density of 2 bands（26 and 36 kD） decreased obviously at the salinity of 99‰ NaCl compared to at the salinity of 33‰ NaCl.The soluble proteins in Chlamydomonas sp.ICE-L grown under salinity of 33‰ and 99% NaCl were compared by 2-D gel electrophoresis.After shocking with high salinity,8 protein spots were found to disappear,and the density of 28 protein spots decreased.In addition,19 protein spots were enhanced or induced,including one new peptide（51 kD）.The changes of proteins might be correlated with the resistance for Chlamydomonas sp.ICE-L to high salinity.

Singlet oxygen-dominated peroxymonosulfate activation by layered crednerite for organic pollutants degradation in high salinity wastewater

Advanced oxidation processes have been widely studied for organic pollutants treatment in water,but the degradation performance of radical-dominated pathway was severely inhibited by the side reactions between the anions and radicals,especially in high salinity conditions.Here,a singlet oxygen(^(1)O_(2))-dominated non-radical process was developed for organic pollutants degradation in high salinity wastewater,with layered crednerite(CuMnO_(2))as catalysts and peroxymonosulfate(PMS)as oxidant.Based on the experiments and density functional theory calculations,^(1)O_(2)was the dominating reactive species and the constructed Cu-O-Mn with electron-deficient Mn captured electron from PMS promoting the generation of^(1)O_(2).The rapid degradation of bisphenol A(BPA)was achieved by CuMnO_(2)/PMS system,which was 5-fold and 21-fold higher than that in Mn_(2)O_(3)/PMS system and Cu_(2)O/PMS system.The CuMnO_(2)/PMS system shown prominent BPA removal performance under high salinity conditions,prominent PMS utilization efficiency,outstanding total organic carbon removal rate,wide range of applicable pH and good stability.This work unveiled that the^(1)O_(2)-dominated non-radical process of CuMnO_(2)/PMS system overcame the inhibitory effect of anions in high salinity conditions,which provided a promising technique to remove organic pollutants from high saline wastewater.

高温高盐油藏化学驱提高采收率理论技术与矿场应用

化学驱是提高采收率的重要方法之一,在油田高效开发中发挥了重要作用。基于中外化学驱技术的发展现状,针对高温高盐的苛刻油藏条件,系统总结了胜利油田化学驱提高采收率的理论技术。通过梳理胜利油田60a来化学驱技术从室内研究到矿场应用所攻克的理论和技术难题,介绍了高温高盐油藏化学驱的发展历程。通过认识驱油剂之间以及驱油剂与原油之间的相互作用和构效关系,迭代创建了高温高盐油藏聚合物“黏弹并重扩波及”理论、表面活性剂“油剂相似富集、阴非加合增效”理论和黏弹性颗粒“变形调驱”理论,并攻关形成了具有胜利特色的高温高盐油藏聚合物驱技术、无碱二元复合驱技术和非均相复合驱技术,攻克了温度为85℃、矿化度为30000 mg/L的油藏大幅度提高采收率的难题,矿场实施的96个化学驱项目的年产油量连续20a占油田年产油量的11%以上。该系列技术为胜利油田产量稳定和可持续发展做出了重要贡献。

高温高矿化度油藏提高采收率用聚合物驱油剂研究

为满足高温高矿化度油藏继续提高采收率的需求,室内以丙烯酰胺、2-丙烯酰胺-2-甲基丙磺酸、长碳链疏水单体和刚性单体为合成原料,制备了一种耐温抗盐型聚合物驱油剂KWY300,并对其综合性能进行了评价。结果表明,聚合物驱油剂KWY300具有良好的增黏性能和耐温抗盐性能,当溶液矿化度为133000 mg/L,老化温度为110℃时,质量浓度为1200 mg/L的聚合物溶液黏度值仍能达到80 mPa·s以上,增黏效果明显优于HPAM。聚合物驱油剂KWY300具有良好的渗流性能,在储层温度和矿化度条件下,阻力系数可以达到50以上,残余阻力系数约为10。此外,聚合物驱油剂KWY300还具有良好的驱油效果,注入PV数为0.5、质量浓度为1200 mg/L的KWY300溶液后,能使岩心水驱后的采收率继续提高16.4%,驱油效果明显优于HPAM。高温高矿化度油藏现场实施聚合物KWY300驱油措施后,区块内生产井的日产油量提升至措施前的3倍以上,含水率有所下降,起到了明显增油效果。

基于零排的高盐废水处理技术经济比选分析

高盐废水零排工艺中常有超滤、反渗透、MVR蒸发等工艺的组合,但因为零排的水平衡问题,其组合顺序影响投资规模和运行成本。以某资源化项目的废水零排处理工艺为例,对不同的工艺路线进行技术经济分析,研究发现直接采用MVR蒸发全量处理废水能耗过高,采用DTRO减量化后再蒸发结晶更经济,分析成果可为类似项目决策提供参考。

基于高干度泡沫实验的非均质咸水层CO_(2)封存能力分析

CO_(2)咸水层封存是实现“碳中和”目标的一项重要技术手段。高干度泡沫不仅能更好地控制CO_(2)流度而且还能适应地层的非均质性,明显提高了咸水层的空间利用效率。为探究高干度CO_(2)泡沫在非均质咸水层中的调剖效果与CO_(2)封存能力,利用自行设计的高温高压驱替实验装置,进行了不同渗透率级差的并联岩心CO_(2)泡沫驱室内实验研究,分析了驱替过程中岩心的气液产出情况与CO_(2)饱和度的变化规律,指出了不同渗透率级差非均质岩心模型的碳封存效果与机理。研究结果表明:①与CO_(2)气驱相比高干度泡沫驱用于CO_(2)咸水层埋存具有更大优势,当岩心渗透率级差介于2.6~10.8时,泡沫均能有效封堵高渗透岩心,使阻力因子维持在36左右,增大了驱替压差与低渗透岩心的产气、产液速度;②岩心中气相饱和度与渗透率存在一定关系,当岩心的渗透率小于2450 mD时,最高气相饱和度随渗透率增加而增大,当渗透率超过2450 mD时,岩心最高气相饱和度在80%左右;③采用高干度泡沫驱可以有效扩大岩心中CO_(2)封存量,渗透率级差为4时,泡沫驱的CO_(2)封存体积较气驱增长219%,当渗透率级差扩大至10.8,CO_(2)封存量能始终维持在较高水平。结论认为,咸水层条件下CO_(2)泡沫驱替实验探究了CO_(2)封存能力变化,提供了非均质储层提高碳封存效率的实验认识,可为非均质咸水层中CO_(2)的地质封存技术优化提供参考和借鉴。