Kinetics of natural rubber （NR） vulcanization by lanthanum O, O＇-diisopropyldithiophosphate [ La（DiPDP）3 ] was studied. La（DiPDP）3 had remarkable accelerating effect on the vulcanization of NR. The rate constan...Kinetics of natural rubber （NR） vulcanization by lanthanum O, O＇-diisopropyldithiophosphate [ La（DiPDP）3 ] was studied. La（DiPDP）3 had remarkable accelerating effect on the vulcanization of NR. The rate constant k6 of the reaction that turned polysulphidic cross-links into the modified main chain was higher than that of desulfuration reaction of polysulfidic cross-links （k3 ）. The activation energies （Ea2, Ea3, and Ea6） of the formation, desulfuration, and decomposition of polysulfidic cross-links were 87.57,102.34, and 95.01 kJ · mol^-1, respectively. Activation energy （Eas） of the reaction that turned the cross-link precursors into the modified main chain was 82.67 kJ · mol^-1. It could be concluded that the proportion of polysulphidic cross-links was higher than mono- and di- sulphidic cross-links during induction and curing periods, mono- and di- sulphidic cross-links increased as curing temperature rose. In the temperature range of 140 - 160 ℃, the amounts of polysulphidic cross-links were similar. However, over 160℃, mono- and di- sulphidic cross-links increased rapidly. Moreover, cross-link density of the vulcanizates was determined from the equilibrium-swelling data. A chemical probe detected the concentration of polysulphidic cross-links of vulcanizates. The change trend of the results predicated from equation corresponded to that of the experimental results.展开更多
In this paper,the natural rubber is chosen as the main constituents for the transition layer of all-steel load radial tyre,which is pre-vulcanized by 500-keV E-beam irradiation of up to 60 kGy.The results show that th...In this paper,the natural rubber is chosen as the main constituents for the transition layer of all-steel load radial tyre,which is pre-vulcanized by 500-keV E-beam irradiation of up to 60 kGy.The results show that the green strength of transitional layer increases with the dose,reaching four times as much as the control(without irradiation) at 60 kGy.The final mechanical properties do not differ significantly from those of the control except that the aging and fatigue performance increased.However,thickness of the natural rubber transitional layer for an average single tyre can be reduced by 1 mm(or 1.5 kg) without obvious adverse effect on tyre performance.展开更多
Allyl terminated polyether was used to improve the hydrophilicity of addition-cured room temperature vulcanization silicone rubber. With the increasing of the polyether, both the hydrophilicity and water absorbed of t...Allyl terminated polyether was used to improve the hydrophilicity of addition-cured room temperature vulcanization silicone rubber. With the increasing of the polyether, both the hydrophilicity and water absorbed of the vulcanizates were increased. The mechanical properties were also improved by adding the polyether. The result showed that 1.5wt% of the polyether provided the silicone rubber with proper hydrophilicity.展开更多
基金Project supported by the Guangdong Natural Science Foundation (05006563)
文摘Kinetics of natural rubber （NR） vulcanization by lanthanum O, O＇-diisopropyldithiophosphate [ La（DiPDP）3 ] was studied. La（DiPDP）3 had remarkable accelerating effect on the vulcanization of NR. The rate constant k6 of the reaction that turned polysulphidic cross-links into the modified main chain was higher than that of desulfuration reaction of polysulfidic cross-links （k3 ）. The activation energies （Ea2, Ea3, and Ea6） of the formation, desulfuration, and decomposition of polysulfidic cross-links were 87.57,102.34, and 95.01 kJ · mol^-1, respectively. Activation energy （Eas） of the reaction that turned the cross-link precursors into the modified main chain was 82.67 kJ · mol^-1. It could be concluded that the proportion of polysulphidic cross-links was higher than mono- and di- sulphidic cross-links during induction and curing periods, mono- and di- sulphidic cross-links increased as curing temperature rose. In the temperature range of 140 - 160 ℃, the amounts of polysulphidic cross-links were similar. However, over 160℃, mono- and di- sulphidic cross-links increased rapidly. Moreover, cross-link density of the vulcanizates was determined from the equilibrium-swelling data. A chemical probe detected the concentration of polysulphidic cross-links of vulcanizates. The change trend of the results predicated from equation corresponded to that of the experimental results.
基金Supported by Henan Province-Chinese Academy of Sciences Cooperation project(No.092106000021)the Scientific and Technological Brainstorm project of Erqi District,Zhengzhou City(No.20103315)
文摘In this paper,the natural rubber is chosen as the main constituents for the transition layer of all-steel load radial tyre,which is pre-vulcanized by 500-keV E-beam irradiation of up to 60 kGy.The results show that the green strength of transitional layer increases with the dose,reaching four times as much as the control(without irradiation) at 60 kGy.The final mechanical properties do not differ significantly from those of the control except that the aging and fatigue performance increased.However,thickness of the natural rubber transitional layer for an average single tyre can be reduced by 1 mm(or 1.5 kg) without obvious adverse effect on tyre performance.
文摘Allyl terminated polyether was used to improve the hydrophilicity of addition-cured room temperature vulcanization silicone rubber. With the increasing of the polyether, both the hydrophilicity and water absorbed of the vulcanizates were increased. The mechanical properties were also improved by adding the polyether. The result showed that 1.5wt% of the polyether provided the silicone rubber with proper hydrophilicity.
