Sludge concentration dynamic distribution and its impact on the performance of UNITANK

UNITANK is a biological wastewater treatment process that combines the advantages of traditional activated sludge process and sequencing batch reactor, which is divided into Tank A, B and C. In this study, the sludge distribution and its impact on performance of UNITANK were carried out in Liede Wastewater Plant （WWTP） of Guangzhou, China. Results showed that there was a strong affiliation between Tank A and B of the system in sludge concentration distribution. The initial sludge concentration in Tank A could present the sludge distribution of the whole system. The sludge distribution was mainly influenced by hydraulic condition. Unsteady sludge distribution had an impact on variations of substrates in reactors, especially in decisive reactor, and this could lead to failure of system. Settler could partially remove substrates such as COD and NO3-N, but there was adventure of sludge deterioration. The rational initial sludge concentration in Tank A should be 4000-6000 mg/L MLSS.

Dynamic Distribution Adaptation Based Transfer Network for Cross Domain Bearing Fault Diagnosis

In machinery fault diagnosis,labeled data are always difficult or even impossible to obtain.Transfer learning can leverage related fault diagnosis knowledge from fully labeled source domain to enhance the fault diagnosis performance in sparsely labeled or unlabeled target domain,which has been widely used for cross domain fault diagnosis.However,existing methods focus on either marginal distribution adaptation(MDA)or conditional distribution adaptation(CDA).In practice,marginal and conditional distributions discrepancies both have significant but different influences on the domain divergence.In this paper,a dynamic distribution adaptation based transfer network(DDATN)is proposed for cross domain bearing fault diagnosis.DDATN utilizes the proposed instance-weighted dynamic maximum mean discrepancy(IDMMD)for dynamic distribution adaptation(DDA),which can dynamically estimate the influences of marginal and conditional distribution and adapt target domain with source domain.The experimental evaluation on cross domain bearing fault diagnosis demonstrates that DDATN can outperformance the state-of-the-art cross domain fault diagnosis methods.

Dynamic Distribution Model with Prime Granularity for Parallel Computing

Dynamic distribution model is one of the best schemes for parallel volume rendering. How- ever, in homogeneous cluster system.since the granularity is traditionally identical, all processors communicate almost simultaneously and computation load may lose balance. Due to problems above, a dynamic distribution model with prime granularity for parallel computing is presented. Granularities of each processor are relatively prime, and related theories are introduced. A high parallel performance can be achieved by minimizing network competition and using a load balancing strategy that ensures all processors finish almost simultaneously. Based on Master-Slave-Gleaner ( MSG) scheme, the parallel Splatting Algorithm for volume rendering is used to test the model on IBM Cluster 1350 system. The experimental results show that the model can bring a considerable improvement in performance, including computation efficiency, total execution time, speed, and load balancing.

China’s urban green innovation:Regional differences,distribution dynamics,and convergence

Urban green innovation(UGI)is essential to environmental protection,ecological conservation,and high quality economic growth.Using green patents,our study assessed the level of UGI of 287 Chinese cities at and above the prefecture level.Then,using the Dagum Gini coefficient,kernel density estimation(KDE),and con‐vergence models,we examined regional differences,distribution dynamics,and convergence of UGI across China.The study’s findings are as follows:(1)Overall,regional differences in UGI tended to narrow,and the main contributor to these differences was the difference between economic zones.(2)KDE showed that the level of UGI was rising,which was polarized within each economic zone.(3)The national UGI in economic zones other than the Northeast and Middle Yellow River Economic Zones featured significantσconvergence,while each economic zone showed absolute and conditionalβconvergence.

Characteristics of the dynamic distribution of suspended particles in the flocculation process

Polyaluminium chloride (PAC) synthetic water was selected as a coagulant and kaolin suspension particles as objects to be removed. Online instruments such as the turbidimeter and particle counter were employed to monitor the flocculation process online and collect test data. The aim of the experiments was to study the dynamic distribution characteristics of suspension particles in the flocculation process. The 3D flow field in the reacting vessel was also simulated at different slow stirring speeds. The experiments showed that particle collision and aggregation in the flocculation process is in compliance with the Sutherland cluster aggregation model. This study further indicated that under appropriate hydrodynamic conditions, the distribution of turbulent flow in the reactor could be improved to increase the odds of effective particle collision and restrain the breakup of formed flocs by vortex shearing force. A good flocculation effect could therefore be produced.

Incorporation of a Dynamic Root Distribution into CLM4.5： Evaluation of Carbon and Water Fluxes over the Amazon

Roots are responsible for the uptake of water and nutrients by plants and have the plasticity to dynamically respond to different environmental conditions. However, most land surface models currently prescribe rooting profiles as a function only of vegetation type, with no consideration of the surroundings. In this study, a dynamic rooting scheme, which describes root growth as a compromise between water and nitrogen availability, was incorporated into CLM4.5 with carbon-nitrogen （CN） interactions （CLM4.5-CN） to investigate the effects of a dynamic root distribution on eco-hydrological modeling. Two paired numerical simulations were conducted for the Tapajos National Forest km83 （BRSa3） site and the Amazon, one using CLM4.5-CN without the dynamic rooting scheme and the other including the proposed scheme. Simulations for the BRSa3 site showed that inclusion of the dynamic rooting scheme increased the amplitudes and peak values of diurnal gross primary production （GPP） and latent heat flux （LE） for the dry season, and improved the carbon （C） and water cycle modeling by reducing the RMSE of GPP by 0.4 g C m^-2 d^-1, net ecosystem exchange by 1.96 g C m^-2 d^-1, LE by 5.0 W m^-2, and soil moisture by 0.03 m^3 m^-3, at the seasonal scale, compared with eddy flux measurements, while having little impact during the wet season. For the Amazon, regional analysis also revealed that vegetation responses （including GPP and LE） to seasonal drought and the severe drought of 2005 were better captured with the dynamic rooting scheme incorporated.

Geostatistical Analysis of Spatial Distribution and Dynamics of Dead Heart of Sugarcane Seedlings Caused by Borer

Dead heart of sugarcane is an important symptom caused by borer attack. In the present study, the spatial distribution and dynamics of dead heart of sugarcane in the field were investigated based on geostatistical analysis, and semivariograms were computed in four separate directions(0°, 45°, 90° and 135°) and fitted with various theoretical models to determine the best fitted one. The Ordinary Kriging was used to interpolate spatial data. The results revealed that the density of dead hearts of sugarcane increased in a single-peak pattern, and the degree of spatial aggregation and random variation both decreased with the increase in the density of dead heart. In addition, dead heart of sugarcane caused by borer exhibited spatial aggregation.With the increase in the density of dead heart, the degree of spatial aggregation decreased, while the correlation increased. Kriging interpolation indicated that the correlation between the spatial patches was weak in early seedling stage, and became strong in middle and late seedling stage.

Some dynamical property of the Tsallis distribution from a Fokker-Planck equation

This paper studies the possible dynamical property of the Tsallis distribution from a Fokker--Planck equation. For the Langevin dynamical system with an {arbitrary} potential function, Markovian friction and Gaussian white noise, it shows that the current form of Tsallis distribution cannot describe any nonequilibrium dynamics of the system, and it only stands for a simple isothermal situation of the system governed by a potential field. So the form of Tsallis distribution and many existing applications using the Tsallis distribution need to be reconsidered.

Tide forecasting method based on dynamic weight distribution for operational evaluation

Through analysis of operational evaluation factors for tide forecasting, the relationship between the evaluation factors and the weights of forecasters was examined. A tide forecasting method based on dynamic weight distribution for operational evaluation was developed, and multiple-forecaster synchronous forecasting was realized while avoiding the instability cased by only one forecaster. Weights were distributed to the forecasters according to each one＇s forecast precision. An evaluation criterion for the professional level of the forecasters was also built. The eligibility rates of forecast results demonstrate the skill of the forecasters and the stability of their forecasts. With the developed tide forecasting method, the precision and reasonableness of tide forecasting are improved. The application of the present method to tide forecasting at the Huangpu Park tidal station demonstrates the validity of the method.

Detecting conflicts of interest in credit rating changes:a distribution dynamics approach

In this study,we compare the adjustments of credit ratings by an investor-paid credit rating agency(CRA),represented by Egan-Jones Ratings Company,and an issuer-paid CRA,represented by Moody’s Investors Service,vis-à-vis conflict of interest and reputation.A novel distribution dynamics approach is employed to compute the probability distribution and,hence,the downgrade and upgrade probabilities of a credit rating assigned by these two CRAs of different compensation systems based on the dataset of 750 U.S.issuers between 2011 and 2018,that is,after the passage of the Dodd–Frank Act.It is found that investor-paid ratings are more likely to be downgraded than issuerpaid ratings only in the lower rating grades,which is consistent with the argument that investor-paid agencies have harsher attitudes toward potentially defaulting issuers to protect their reputation.We do not find evidence that issuer-paid CRAs provide overly favorable treatments to issuers with threshold ratings,implying that reputation concerns and the Dodd–Frank regulation mitigate the conflict of interests,while issuerpaid CRAs are more concerned about providing accurate ratings.

Distributed dynamic event-based finite-time dissipative synchronization control for semi-Markov switched fuzzy cyber-physical systems against random packet losses

This paper is concerned with the finite-time dissipative synchronization control problem of semi-Markov switched cyber-physical systems in the presence of packet losses, which is constructed by the Takagi–Sugeno fuzzy model. To save the network communication burden, a distributed dynamic event-triggered mechanism is developed to restrain the information update. Besides, random packet dropouts following the Bernoulli distribution are assumed to occur in sensor to controller channels, where the triggered control input is analyzed via an equivalent method containing a new stochastic variable. By establishing the mode-dependent Lyapunov–Krasovskii functional with augmented terms, the finite-time boundness of the error system limited to strict dissipativity is studied. As a result of the help of an extended reciprocally convex matrix inequality technique, less conservative criteria in terms of linear matrix inequalities are deduced to calculate the desired control gains. Finally, two examples in regard to practical systems are provided to display the effectiveness of the proposed theory.

Climate change impacts the distribution of Quercus section Cyclobalanopsis(Fagaceae),a keystone lineage in East Asian evergreen broadleaved forests

East Asian evergreen broadleaved forests(EBFLs) harbor high species richness,but these ecosystems are severely impacted by global climate change and deforestation.Conserving and managing EBLFs requires understanding dominant tree distribution dynamics.In this study,we used 29 species in Quercus section Cyclobalanopsis-a keystone lineage in East Asian EBLFs-as proxies to predict EBLF distribution dynamics using species distribution models(SDMs).We examined climatic niche overlap,similarity,and equivalency among seven biogeographical regions’ species using’ecospat’.We also estimated the effectiveness of protected areas in the predicted range to elucidate priority conservation regions.Our results showed that the climatic niches of most geographical groups differ.The western species under the Indian summer monsoon regime were mainly impacted by temperature factors,whereas precipitation impacted the eastern species under the East Asian summer monsoon regime.Our simulation predicted a northward range expansion of section Cyclobalanopsis between 2081 and 2100,except for the ranges of the three Himalayan species analyzed,which might shrink significantly.The greatest shift of highly suitable areas was predicted for the species in the South Pacific,with a centroid shift of over 300 km.Remarkably,only 7.56% of suitable habitat is currently inside protected areas,and the percentage is predicted to continue declining in the future.To better conserve Asian EBLFs,establishing nature reserves in their northern distribution ranges,and transplanting the populations with predicted decreasing numbers and degraded habitats to their future highly suitable areas,should be high-priority objectives.

A distributed dynamic mesh model of a helical gear pair with tooth profile errors

A dynamic model of a helical gear rotor system is proposed.Firstly,a generally distributed dynamic model of a helical gear pair with tooth profile errors is developed.The gear mesh is represented by a pair of cylinders connected by a series of springs and the stiffness of each spring is equal to the effective mesh stiffness.Combining the gear dynamic model with the rotor-bearing system model,the gear-rotor-bearing dynamic model is developed.Then three cases are presented to analyze the dynamic responses of gear systems.The results reveal that the gear dynamic model is effective and advanced for general gear systems,narrow-faced gear,wide-faced gear and gear with tooth profile errors.Finally,the responses of an example helical gear system are also studied to demonstrate the influence of the lead crown reliefs and misalignments.The results show that both of the lead crown relief and misalignment soften the gear mesh stiffness and the responses of the gear system increase with the increasing lead crown reliefs and misalignments.

Review:Recent Developments in Dynamic Load Identification for Aerospace Vehicles Considering Multi⁃source Uncertainties

The determination of the dynamic load is one of the indispensable technologies for structure design and health monitoring for aerospace vehicles.However,it is a significant challenge to measure the external excitation directly.By contrast,the technique of dynamic load identification based on the dynamic model and the response information is a feasible access to obtain the dynamic load indirectly.Furthermore,there are multi-source uncertainties which cannot be neglected for complex systems in the load identification process,especially for aerospace vehicles.In this paper,recent developments in the dynamic load identification field for aerospace vehicles considering multi-source uncertainties are reviewed,including the deterministic dynamic load identification and uncertain dynamic load identification.The inversion methods with different principles of concentrated and distributed loads,and the quantification and propagation analysis for multi-source uncertainties are discussed.Eventually,several possibilities remaining to be explored are illustrated in brief.

THEORETICAL INVESTIGATION ON STATE OF LOAD DISTRIBUTION AMONG CONTACT BEARINGS OF DOUBLE CIRCULAR ARC HELICAL GEARS

A dynamic analysis approcach to investigate the state of load distribution among contact bearings of double circular are belical gears is proposed and a computer program is developed for calculating the factor of iced distribution based on the theory of W-N gears. The changing situations of load distribution among contact bearings of the gears influenced by main issues are analyzed by a series of parametric studies.

Measured dynamic load distribution within the in situ axlebox bearing of high-speed trains under polygonal wheel–rail excitation

The dynamic load distribution within in-service axlebox bearings of high-speed trains is crucial for the fatigue reliability assessment and forward design of axlebox bearings. This paper presents an in situ measurement of the dynamic load distribution in the four rows of two axlebox bearings on a bogie wheelset of a high-speed train under polygonal wheel–rail excitation. The measurement employed an improved strain-based method to measure the dynamic radial load distribution of roller bearings. The four rows of two axlebox bearings on a wheelset exhibited different ranges of loaded zones and different means of distributed loads. Besides, the mean value and standard deviation of measured roller–raceway contact loads showed non-monotonic variations with the frequency of wheel–rail excitation. The fatigue life of the four bearing rows under polygonal wheel–rail excitation was quantitatively predicted by compiling the measured roller–raceway contact load spectra of the most loaded position and considering the load spectra as input.

Study on the Two-Dimensional Density Distribution for Gas Plasmas Driven by Laser Pulse

We perform an experimental study of two-dimensional（2D） electron density profiles of the laser-induced plasma plumes in air by ordinarily laboratorial interferometry. The electron density distributions measured show a feature of hollow core. To illustrate the feature, we present a theoretical investigation by using dynamics analysis. In the simulation, the propagation of laser pulse with the evolution of electron density is utilized to evaluate ionization of air target for the plasma-formation stage. In the plasma-expansion stage, a simple adiabatic fluid dynamics is used to calculate the evolution of plasma outward expansion. The simulations show good agreements with experimental results, and demonstrate an effective way of determining 2D density profiles of the laser-induced plasma plume in gas.

新一代运载火箭发射燃气动力学数值模拟

By using the mesh resolution control method based on the nozzle scale,a paralleled super numerical simulation and high-quality mesh model of the launch jet dynamics for new-generation launch vehicles was developed.Based upon this,a transient numerical simulation method,combining the pressure and velocity,tightly coupled algorithm and SST turbulence model,was used to complete the unsteady numerical simulation of the launch jet dynamics of the new-generation launch vehicles.The numerical simulation results of the launch jet dynamics,for the new-generation launch vehicles,demonstrated that despite the complex structure of the launch platform,the jet flows of the core stage and booster engines were generally smoothly channeled into the double deflecting trench through the launch platform’s diversion hole at the initial stage of ignition.After the lift off,the jet flows of the core stage and the booster engines began to affect and ablate the grillage-shaped beam and the adjoined surface of the launch platform adjacent to the booster engines.At a higher altitude after lift off,it could be seen for the new-generation launch vehicles the ablation range of high temperature and high-speed jet flows on the launch platform further expanded,which would have a severe ablation effect on the fuel filling tower near the booster engines and even all the support arms.The numerical simulation of launch jet dynamics also established that the jet flows embers at the bottom of the core stage rocket body continued to be affected for an extended period of time due to the large number of nozzles in the new-generation launch vehicles engine and the weak suction effect of the jet flows in the core-stage engines.

Design of distributed dynamic absorbers for vibration suppression of panel structures

Distributed dynamic absorbers have many advantages such as wide frequency bandwidth for vibration suppression,strong detuning adaptability,and high system stability,making them very suitable for the vibration and noise control of continuous structures.Therefore,they have broad application prospects in various fields such as transportation,aviation,and aerospace.However,there are still many challenges in the engineering applications of distributed dynamic absorbers for vibration suppression,including the engineering realization of the optimal damping of traditional optimal coherence dynamic absorbers,and the engineering applicability of the finite periodic array dynamic absorbers.Based on the damping material properties obtained by the dynamic mechanical analyzer tests,this paper establishes the finite element model of the cantilever-beam-type dynamic absorber with constrained damping layers,aiming to realize the accurate determination of the optimal damping.Experiments are conducted by attaching the traditional dynamic absorbers with the optimal damping to a thin-walled panel with four clamped edges.Results show that the vibration of the panel is well suppressed,with the reduction of the frequency response peak larger than 14 dB and the reduction ratio of RMS larger than 58%within 500 Hz.Afterwards,the periodically arrayed dynamic absorbers are designed according to the bandgap regulation method.The tuning behavior of the arrayed dynamic absorbers by changing designing parameters is investigated.The vibration reduction effect of arrayed dynamic absorbers is compared with that of the traditional dynamic absorbers under the same mass ratio through experiments.Results indicate that the arrayed dynamic absorbers are easier to design,and have a similar reduction effect on the modal vibration of the thin panel as the traditional dynamic absorbers within a narrow frequency range near the natural frequency,while they perform unsatisfactory in a broad band.Significantly,if the appropriate frequency and damping of the arrayed absorbers are chosen,a relatively wide bandgap can also be generated,which shows high engineering applicability.The research work in this paper provides beneficial reference for the design of distributed dynamic absorbers suitable for vibration suppression of thinwalled panel structures.

Character of geoelectric intermediate term precursory anomaly and judgment for intermediate term tendency of strong earthquake

Based on systematic processing to long-term geoelectric observation data, we mainly studied the character of earthresistivity tendency anomaly for MS>7.0 strong earthquakes and its relation with seismogenic process. The character of quick descending at early stage and then slow development with steady shape in geoelectricity is a basicfeature ofgeoelectric tendency anomaly for strong earthquake. Usually the ratio of average time between the earlyquick descend stage and the post slow development stage is about if4. In addition, for Tangshan Ms=7.8 andSongpan Ms=7.2 earthquake, we studied the diffusion character of the geoelectric tendency anomaly development.For Tangshan earthquake, we also studied the time-space-strength dynamic evolution character of its geoelectricprecursory information quantity. The results showed that diffusion velocity of geoelectric precursory tendencyanomaly for the two earthquakes is respectively 90 kmja and 100 km/a. The variation character of geoelectric tendency anomaly presents some indexes for judgment of strong earthquake tendency background and intermediateterm prediction.