A Sine Driving System for the Dynamic Experiment of the Aerofoil Model

The design principle and the structural characters of a new sine driving system apparatus, which have been used by NPU NF-3 wind tunnel in the dynamic stall experiments on the oscillating aerofoil model from 1994, is introduced. Some measures to improve the stability and flexibility are studied. The obvious advantages of the system are its simple structure, convenient operation and more accurate sine relationship between the attack angle and the rotating angle of the aerofoil The driving system has been proved advisable comparing with the experimental results both abroad and in many dynamic tests in NF-3 wind tunnel. It can provide guidelines for the study of the aerodynamic properties on the oscillating aerofoil.

Numerical and experimental studies on impact dynamics of a planar flexible multibody system

In this paper a computational methodology on impact dynamics of the flexible multibody system is presented. First, the floating frame of reference approach and nodal coordinates on the basis of finite element formulation are used to describe the kinematics of planar deformable bodies. According to the kinematic description of contact conditions, the contact constraint equations of planar flexible bodies are derived. Based on the varying topology technique the impact dynamic equations for a planar multibody system are established. Then the initial conditions of the equations in each contact stage are determined according to the discontinuity theory in continuum mechanics. The experiments between the aluminum rods are performed to check the correctness of the proposed method. Through the comparison between the numerical and experimental results the proposed method is validated. Experimental results also show that the impulse momentum method cannot accurately predict the complex impact dynamic phenomena and the continuous model may lead to a serious error when used to simulate the impact problems with significant wave propagation effects.

Experimental studies of focal mechanism based on the dynamic process of energy release

ＥｘｐｅｒｉｍｅｎｔａｌｓｔｕｄｉｅｓｏｆｆｏｃａｌｍｅｃｈａｎｉｓｍｂａｓｅｄｏｎｔｈｅｄｙｎａｍｉｃｐｒｏｃｅｓｏｆｅｎｅｒｇｙｒｅｌｅａｓｅＸＩＭＩＮＧＺＨＥＮＧ１）（郑熙铭）ＨＯＵＸＩＵＧＡＯ２）（高后秀）ＹＵＱＩＮＹＡＮＧ２）（杨渝...

Some numerical experiments of the dynamics of the wintertime circulation in the Northern Huanghai Sea and the Bohai Sea

-Some numerical experiments have been developed to explain dynamically the mechanism of the formation of the wintertime circulation in the Northern Huanghai Sea and the Bohai Sea. From the results of the numerical experiments with Coriolis parameter having positive and negative values respectively, it is found that the current pattern characterized by flowing into the Bohai Sea in the northern part of the Bohai Straits and flowing out of the Bohai Sea in the southern part of the Bohai Straits is controlled basically by the bottom topography with 'the deepness on the northern side and shallowness on the southern side'in the Bohai Straits, and is not related to Coriolis parameter having positive and negative values. It also shows that the Huanghai Warm Current regarded as the inllow condition passing through the in-ports at the water boundary of the numerical experiments only influences the region near the water boundary and the eastern region of the Northern Huanghai Sea. In addition, the mechanism of the formation of several mesoscale eddies and the influence of the bottom topography on the wintertime circulation in the basin have been discussed.

WRIST FORCE SENSOR'S DYNAMIC PERFORMANCE CALIBRATION BASED ON NEGATIVE STEP RESPONSE

Negative step response experimental method is used in wrist force sensor＇s dynamic performance calibration. The exciting manner of negative step response method is the same as wrist force sensor＇s load in working. This experimental method needn＇t special experiment equipments. Experiment＇s dynamic repeatability is good. So wrist force sensor＇s dynamic performance is suitable to be calibrated by negative step response method. A new correlation wavelet transfer method is studied. By wavelet transfer method, the signal is decomposed into two dimensional spaces of time-frequency. So the problem of negative step exciting energy concentrating in the low frequency band is solved. Correlation wavelet transfer doesn＇t require that wavelet primary function be orthogonal and needn＇t wavelet reconstruction. So analyzing efficiency is high. An experimental bench is designed and manufactured to load the wrist force sensor orthogonal excitation force/moment. A piezoelectric force sensor is used to setup soft trigger and calculate the value of negative step excitation. A wrist force sensor is calibrated. The pulse response function is calculated after negative step excitation and step response have been transformed to positive step excitation and step response. The pulse response function is transferred to frequency response function. The wrist force sensor＇s dynamic characteristics are identified by the frequency response function.

Study on the Treatment of Acid Mine Drainage Containing Fe^(2+) and Mn^(2+) Using Modified Spontaneous Combustion Gangue

The high concentrations of Fe^(2+) and Mn^(2+) in acid mine drainage make it difficult and expensive to treat.It is urgent that we find a cheap and efficient adsorption material to treat Fe^(2+) and Mn^(2+).As a solid waste in mining areas,coal gangue occupies a large area and pollutes the surrounding environment during the stacking process.Developing a method of resource utilization is thus a research hotspot.In this study,we modified spontaneous combustion gangue using NaOH,NaCl,and HCl by chemically modifying the minerals.We determined the optimal conditions for treating Fe^(2+) and Mn^(2+) in acid mine drainage with spontaneous combustion gangue and modified coal gangue using the single factor test method.Based on results of the static test,two dynamic test columns,column No.1(spontaneous combustion gangue)and column No.2(NaOH modified spontaneous combustion gangue),were constructed,and the repair effects of acid mine drainage were compared and analyzed using dynamic experiments.The results show that overall,NaOH modified spontaneous combustion gangue is the most efficient at removing the Fe^(2+) and Mn^(2+) in acid mine drainage.The optimal conditions for NaOH modification are an NaOH concentration of 3 mol/L,a liquid to solid ratio of 2 L/kg,and a modification time of 8 h.The overall efficiency of column No.2 at removing Fe^(2+) and Mn^(2+) from acid mine drainage is better than that of column No.1.Among them,the average removal efficiency of Fe^(2+)and Mn^(2+) from acid mine drainage in column No.2 were 97.73%and 44.82%,respectively.The above results show that NaOH modified spontaneous combustion gangue is a good adsorbent,which has application potential in wastewater remediation,as it can achieve the purpose of“treating dust with waste”.

Design of a Reflective Intensity Optical Fibre Bundle Displacement Sensor

Optical fibre sensor has the advantages of small size,light weight,anti⁃electromagnetic interference,and high measurement accuracy,which has important applications in research and industrial production.To design an optical fibre displacement sensor(OFBDS)with simple structure and high measurement accuracy,the unified model of the commonly used OFBDS structures was proposed and the feasibility of the intensity⁃modulation of multi⁃structural optical fibre bundles was analysed based on the arrangement characteristics of the fibre bundle end⁃face.The intensity⁃modulation characteristic of different fibre bundles was analysed,and the single coil coaxial fibre bundle was chosen as the fibre probe in this study.The sensor hardware system was designed.Lastly,the calibration experiment,temperature interference experiment,changes of measured plane surface area,and the dynamic experiment were conducted.Results showed that the sensor linear measurement range was about 3 mm,and the sensor system had excellent static and dynamic characteristics.

Research on the Constitutive Behavior of the Sintered Reactive Material PTFE/Al/Si

The constitutive behaviors of the sintered reactive material PTFE/Al/Si, one new formulation proposed by the author, were studied systematically and found it appears strain-harden, stain-rate harden and temperature-soften effects, so it is more appropriate to describe the mechanical behavior with the Johnson-Cook model. With the static and dynamic experimental results and using the nonlinear fitting method, the mechanical and physical parameters in the Johnson-Cook model were determined, which supply one basis for the future numerical simulation study.

Study on the Mathematical Model of Dielectric Recovery Characteristics in High Voltage SF6 Circuit Breaker

According to the stream theory, this paper proposes a mathematical model of the dielectric recovery characteristic based on the two-temperature ionization equilibrium equation. Taking the dynamic variation of charged particle＇s ionization and attachment into account, this model can be used in collaboration with the Coulomb collision model, which gives the relationship of the heavy particle temperature and electron temperature to calculate the electron density and temperature under different pressure and electric field conditions, so as to deliver the breakdown electric field strength under different pressure conditions. Meanwhile an experiment loop of the circuit breaker has been built to measure the breakdown voltage. It is shown that calculated results are in conformity with experiment results on the whole while results based on the stream criterion are larger than experiment results. This indicates that the mathematical model proposed here is more accurate for calculating the dielectric recovery characteristic, it is derived from the stream model with some improvement and refinement and has great significance for increasing the simulation accuracy of circuit breaker＇s interruption characteristic.

WHU-Grace01s:A new temporal gravity field model recovered from GRACE KBRR data alone

A new temporal gravity field model called WHU-Grace01s solely recovered from Gravity Recovery and Climate Experiment （GRACE） K-Band Range Rate （KBRR） data based on dynamic integral approach is presented in this paper. After meticulously preprocessing of the GRACE KBRR data, the root mean square of its post residuals is about 0.2 micrometers per second, and seventy-two monthly temporal solutions truncated to degree and order 60 are computed for the period from January 2003 to December 2008. After applying the combi- nation filter in WHU-Grace01s, the global temporal signals show obvious periodical change rules in the large-scale fiver basins. In terms of the degree variance, our solution is smaller at high degrees, and shows a good consistency at the rest of degrees with the Release 05 models from Center for Space Research （CSR）, GeoForschungsZentrum Potsdam （GFZ） and Jet Pro- pulsion Laboratory 0PL）. Compared with other published models in terms of equivalent water height distribution, our solution is consistent with those published by CSR, GFZ, JPL, Delft institute of Earth Observation and Space system （DEOS）, Tongji University （Tongji）, Institute of Theoretical Geodesy （ITG）, Astronomical Institute in University of Bern （AIUB） and Groupe de Recherche de Geodesie Spatiale （GRGS}, which indicates that the accuracy of WHU-Grace01s has a good consistency with the previously published GRACE solutions.

Partial phase flow rate measurements for stratified oil-water flow in horizontal wells

To accurately measure and evaluate the oil-water production profile of horizontal wells, a dynamic measurement experiment of oil-water two-phase flow in horizontal wells and numerical simulation were combined to establish a method for measuring the partial phase flow rate of oil-water two-phase stratified flow in horizontal wells. An experimental work was performed in horizontal oil-water two-phase flow simulation well using combination production logging tool including mini-capacitance sensor and mini-spinner. The combination tool provides a recording of holdup and velocity profiles at five different heights of the borehole cross-section. The effect of total flow rate and water-cut on the response of spinner and capacitive sensor at five measured positions were investigated. The capacitance water holdup interpolation imaging algorithm was used to determine the local fluid property and oil-water interface height, and the measured local fluid speed was combined with the numerical simulation result to establish an optimal calculation model for obtaining the partial phase flow rate of the oil-water two-phase stratified flow in the horizontal well. The calculated flow rates of five measured points are basically consistent with the experimental data, the total flow rate and water holdup from calculation are in agreement with the set values in the experiment too, suggesting that the method has high accuracy.

Advances on numerical and experimental investigation of ship roll damping

This paper presents recent developments towards efficient and reliable methods for roll damping estimation based on numerical simulations as well as model tests using the harmonic excited roll motion(HERM)technique.A newly designed automatic roll damping estimation procedure shows the advantage of a just-in-time post processing of experimental measurement results.Real-time analysis of the measured roll damping values permits a considerable shortening of the test times.Thus,a large number of investigations can be carried out with relatively manageable effort in order to determine the roll damping behavior of different keel configurations or at operating conditions,e.g.,different sized keels or Froude numbers.In addition,HERM measurement method is applied to investigate the memory effect.For this purpose,different excitation schemes are introduced and the results are analyzed.Moreover,a study of the scale effect on the roll damping properties is conducted,in which experimental and numerical investigations are performed for two scales of a ship model.Furthermore,a method is developed that significantly reduces the effort of Reynolds average Navier-Stokes(RANS)-based simulations of roll motion.The reduction of simulation time is achieved by introducing an artificial damping.The obtained results show that the developed method is very well applicable for numerical as well as in experimental investigations.During the model tests using HERM technique,the model is free and the rudder is used to keep the straight-ahead course.The analysis of the numerical and experimental results shows that the influence of the rudder induced force and moment during HERM tests is not negligible and the contribution of the rudder must be taken into account by estimating the roll damping.Finally,a new concept is developed to investigate the parametric roll behavior of ships,which allows neglecting the consideration of the complex modelling of free surface waves in the simulations.During the RANS computations,a potential-based method is applied to compute the variation of restoring terms due the roll motion.

Experimental realization of a switchable filter based on a dynamically transformable array

We introduce a geometrically reconfigurable metasurface whose artificial ＂atoms＂ will reorient within unit ceils in response to a thermal stimulus in the microwave spectrum. It can alternate between two contrasting behaviors under different temperatures and serve as a switchable filter that allows the incident energy to be selectively transmitted or reflected with an excess of 10 dB isolation at certain frequencies for both polarizations. The ex- perimental results are consistent with the theoretical simulations, verifying the availability of an innovative method for manipulating electromagnetic waves with the merits of higher controllability for dynamic behavior and greater flexibility in the design process.

Comparison of three different CFD methods for dense fluidized beds and validation by a cold flow experiment

This work focuses on a comparison between three different numerical CFD methods, namely Euler-Euler, Euler-Lagrange-stochastic, and Euler-Lagrange-deterministic, to treat a dense spouted bed, A simple cold flow experiment was used to investigate the hydrodynamics of a gas-solid flow in a three dimensional lab-scale spouted bed, In this context, two different air mass flow rates, 0,005 and 0.006 kg/s, were applied during fluidization. The experimental bed behaviour was recorded with a high-speed camera to validate the numerical predictions in terms of bubble size, bed expansion rate, and particle velocities at different reactor heights. The numerical setup was kept similar between all three modelling approaches, At both gas mass flow rates all three approaches are able to capture the overall bed expansion. However, at higher gas mass flow rates, discrepancies between experiment and simulation increase for the Euler-Euler and Euler-Lagrange-stochastic models. The Euler-Lagrange deterministic model most accurately predicts the flow pattern at both mass flow rates. The main reasons for discrepancies between simulation and experiment result from modelling of the collision and friction forces.

通过融合物理神经网络重构稀疏或不完整数据流场的实用方法

高分辨率流场重构被普遍认为是实验流体力学领域的一项艰巨任务,因为测量数据在时间和空间上通常是稀疏或不完整的.具体而言,由于实验设备或测量技术的限制,某些关键区域的数据无法测量.本文提出了一种基于融合物理神经网络(PINN)的不完美数据重建流场的实用方法,该网络将已知数据与物理原理相结合.通过圆柱体的尾流作为测试算例.研究了两种不完美数据训练集,一种是不同稀疏度的速度数据,另一种是不同区域缺失的速度数据.为了加速训练收敛,本文采用了余弦退火算法以提高PINN的计算效率.计算结果表明,该方法不仅可以高精度地重建真实的速度场,而且即使在数据稀疏度达到1%或核心流动区域数据被截断的情况下,也可以精确地预测压力场.这项研究提供了令人鼓舞的结论,即PINN可以作为实验流体力学的有潜力的数据同化方法.