Seismic dynamic monitoring in CO_2 flooding based on characterization of frequency-dependent velocity factor

The phase velocity of seismic waves varies with the propagation frequency, and thus frequency-dependent phenomena appear when CO2 gas is injected into a reservoir. By dynamically considering these phenomena with reservoir conditions it is thus feasible to extract the frequency-dependent velocity factor with the aim of monitoring changes in the reservoir both before and after CO2 injection. In the paper, we derive a quantitative expression for the frequency-dependent factor based on the Robinson seismic convolution model. In addition, an inversion equation with a frequency-dependent velocity factor is constructed, and a procedure is implemented using the following four processing steps： decomposition of the spectrum by generalized S transform, wavelet extraction of cross-well seismic traces, spectrum equalization processing, and an extraction method for frequency-dependent velocity factor based on the damped least-square algorithm. An attenuation layered model is then established based on changes in the Q value of the viscoelastic medium, and spectra of migration profiles from forward modeling are obtained and analyzed. Frequency-dependent factors are extracted and compared, and the effectiveness of the method is then verified using a synthetic data. The frequency-dependent velocity factor is finally applied to target processing and oil displacement monitoring based on real seismic data obtained before and after CO2 injection in the G89 well block within Shengli oilfield. Profiles and slices of the frequency-dependent factor determine its ability to indicate differences in CO2 flooding, and the predicting results are highly consistent with those of practical investigations within the well block.

Application of GNSS-PPP on Dynamic Deformation Monitoring of Offshore Platforms

The real-time dynamic deformation monitoring of offshore platforms under environmental excitation is crucial to their safe operation.Although Global Navigation Satellite System-Precise Point Positioning(GNSS-PPP)has been considered for this purpose,its monitoring accuracy is relatively low.Moreover,the influence of background noise on the dynamic monitoring accuracy of GNSS-PPP remains unclear.Hence,it is imperative to further validate the feasibility of GNSS-PPP for deformation monitoring of offshore platforms.To address these concerns,vibration table tests with different amplitudes and frequencies are conducted.The results demonstrate that GNSS-PPP can effectively monitor horizontal vibration displacement as low as±30 mm,which is consistent with GNSS-RTK.Furthermore,the spectral characteristic of background noise in GNSS-PPP is similar to that of GNSS-RTK(Real Time Kinematic).Building on this observation,an improved Complete Ensemble Empirical Mode Decomposition with Adaptive Noise(CEEMDAN)has been proposed to de-noise the data and enhance the dynamic monitoring accuracy of GNSS-PPP.Field monitoring application research is also undertaken,successfully extracting and analyzing the dynamic deformation of an offshore platform structure under environmental excitation using GNSS-PPP monitoring in conjunction with improved CEEMDAN de-noising.By comparing the de-noised dynamic deformation trajectories of the offshore platform during different periods,it is observed that the platform exhibits reversible alternating vibration responses under environmental excitation,with more pronounced displacement deformation in the direction of load action.The research results confirm the feasibility and potential of GNSS-PPP for dynamic deformation monitoring of offshore platforms.

Dynamic monitoring of menopause hormone therapy and defining the cut-off value of endometrial thickness during uterine bleeding

The aim of this study was to evaluate the effects of low-dose tibolone therapy on ovarian area, uterine volume and endometrial thickness, and define the cut-off value of endometrial thickness for curettage during uterine bleeding. We followed 619 postmenopausal women, aged 40-60 years, for two years. There were 301 subjects in the low-dose tibolone treatment group and 318 subjects in the control group. The ovarian area, uterine volume and endometrial thickness in all participants were measured by transvaginal ultrasound prior to, one and two years post enrollment, respectively. Endometrial specimens were collected from all subjects with abnormal uterine bleeding during the follow-up period. We found that the uterine volume in the treatment group was greater than that in the control group, and the difference was significant （P〈0.05）, but there were no significant differences in ovarian area and endometrial thickness between the two groups （P〉0.05）. When the cut-off value for endometrial thickness was 7.35 ram, the sensitivity and specificity were 100% and 79.07%, respectively, and 85.71% and 93.02% when 7.55 mm was set as the cut-offduring tibolone therapy. The results indicate that low-dose tibolone therapy may postpone uterine atrophy and the cut-off value of endometrial thickness may be appropriately adjusted for curettage.

DESIGN AND APPLICATION OF DYNAMIC MONITORING AND VISUALIZATION MANAGEMENT INFORMATION SYSTEM OF KARST LAND ROCKY DESERTIFICATION

In order to study the spatial-temporal change and environmental management of regional karst LUCC (land use and land cover change) and its causative environmental effect-rocky desertification by integrating qualitative analysis and quantitative analysis, and relying on RS, GIS and GPS (3S) techniques, karst land rocky derification dynamic monitoring and visualization management information system (KLRD.DMVM.IS) is framed, which includes design aim and structure model, function design, database design and model system design. The model system design gives priority to dynamic monitoring, drive force diagnosis, comprehensive evaluation and decision support of karst rocky desertification. From the viewpoint of model type, mathematic expression and its meaning, the dynamic monitoring models are concretely devised to reflect the spatial and temporal changing features and the trend of karst LUCC and rocky desertification. Taking Du'an Yao Autonomic County of Guangxi as an example, the KLRD.DMVM.IS is systematically analyzed in the application of the process and trend of karst LUCC and rocky desertification in Du'an County, and it provides the technical support for the study on karst land rocky desertification.

PIMS:An Efficient Process Integrity Monitoring System Based on Blockchain and Trusted Computing in Cloud-Native Context

With the advantages of lightweight and high resource utilization,cloud-native technology with containers as the core is gradually becoming themainstreamtechnical architecture for information infrastructure.However,malware attacks such as Doki and Symbiote threaten the container runtime’s security.Malware initiates various types of runtime anomalies based on process form(e.g.,modifying the process of a container,and opening the external ports).Fortunately,dynamic monitoring mechanisms have proven to be a feasible solution for verifying the trusted state of containers at runtime.Nevertheless,the current routine dynamic monitoring mechanisms for baseline data protection are still based on strong security assumptions.As a result,the existing dynamicmonitoringmechanismis still not practical enough.To ensure the trustworthiness of the baseline value data and,simultaneously,to achieve the integrity verification of the monitored process,we combine blockchain and trusted computing to propose a process integrity monitoring system named IPMS.Firstly,the hardware TPM 2.0 module is applied to construct a trusted security foundation for the integrity of the process code segment due to its tamper-proof feature.Then,design a new format for storing measurement logs,easily distinguishing files with the same name in different containers from log information.Meanwhile,the baseline value data is stored on the blockchain to avoidmalicious damage.Finally,trusted computing technology is used to perform fine-grained integrity measurement and remote attestation of processes in a container,detect abnormal containers in time and control them.We have implemented a prototype system and performed extensive simulation experiments to test and analyze the functionality and performance of the PIMS.Experimental results show that PIMS can accurately and efficiently detect tampered processes with only 3.57% performance loss to the container.

Multi-parameter numerical simulation of dynamic monitoring of rock deformation in deep mining

The level of deformation development of surrounding rocks is a vital predictor to evaluate impending coal mine disasters and it is important to establish accurate measurements of the deformed status to ensure coal mine safety. Traditional deformation monitoring methods are mostly based on single parameter, in this paper, multiple approaches are integrated: firstly, both electric and elastic models are established,from which electric field distribution and seismic wave recording are calculated and finally, the resistivity profiles and source position information are determined using inversion methods, from which then the deformation and failure of mine floor are evaluated. According to the inversion results of both electric and seismic field signals, multiple-parameter dynamic monitoring of surrounding rock deformation in deep mine can be performed. The methodology is validated using numerical simulation results which shows that the multi-parameter dynamic monitoring methods have better results for surrounding rock deformation in deep mine monitoring than single parameter methods.

Remote sensing-based dynamic monitoring and environmental change of wetlands in southern Mongolian Plateau in 2000‒2018

The environmental change in the wetlands in the southern Mongolian Plateau has important impacts on the environment of North China and even the entire Northeast Asia,from which the global climate change can be understood on a large scale,especially the climate change in the Mongolian Plateau.This study extracted the information on the wetlands from three stages of remote sensing images(also referred to as RS images)of the study area,including Enhanced Thematic Mapper Plus(ETM+)images of 2000,TM images of 2010,and Landsat 8 Operational Land Imager(OLI)images of 2018.As indicated by the extraction results,the area of wetlands decreased from 796.90 km^(2) of 2000 to 666.24 km^(2) of 2018 at a rate of 7.26 km^(2)/a.The reduced area is 130.66 km^(2),which is about 16.4%reduction.And the patch number of wetlands decreased from 731 of 2000 to 316 of 2018 in the study area,approximately 56.8%reduction(415 patches),and the decrease in the area of the wetlands mainly occurred in the northwest endorheic region.In terms of wetland types,the change of the wetlands was dominated by the decrease of lacustrine wetlands,of which the area and patch number decreased by 106.2 km^(2) and 242,respectively.Furthermore,the area of the lacustrine wetlands decreased at the highest rate of 8.70 km^(2)/a in 2010‒2018.From the perspective of spatial distribution,the wetlands in the western part shrunk more notably than those in the eastern part as a whole in the study area.According to local meteorological data,the precipitation gently decreased and the temperature increased(about 1.7℃)from 1975-2018.Overall,the decrease in the area of the wetlands and the temperature rises in the study area were mainly driven by the Mongolian monsoon climate,reduction in precipitation,and human activities.

THE DYNAMIC MONITORING OF HORQIN SAND LAND USING REMOTE SENSING

Horqin Sand Land is regarded as the typical region for studying the problemof desertification. The integration of 3S(GIS, GPS and RS) techniques offer a roost helpful methodto study and monitor the dynamics of desertification. Based on the data derived from 3 periods'multitemporal Landsat TM imagery of the 1990s, the regional land use and dynamics of desertificationin Horqin Sand Land were studied. The main results revealed that: 1) as long as the general changetendency was concerned, the desertification of Horqin Sand Land would continue to spread; 2) therewas a gradual decrease in the area of both moving sand dunes and semi-stabilized ones, which meantthat fruitful progress had been made to control the desertification during the 1990s; 3) as a resultof unreasonable cultivation, the total area of stabilized sand dunes and grassland in the middleand western region decreased obviously. It suggested that the increasing damage caused by human wasleading to the hazard of further desertification. So in the future, it is necessary to take moreeffective measures to control the spread of desertification and restore the degraded ecosystems forthe purpose of optimizing the global eco-environment in Horqin Sand Land.

Seismic Deformation and Seismic Resistance Analysis of Shapai Roller Compacted Concrete Arch Dam Based on Field Monitoring and Dynamic Finite Element Method

Shapai Roller Compacted Concrete(RCC) Arch Dam is the highest RCC arch dam of the 20th century in the world with a maximum height of 132m,and it is the only concrete arch dam near the epicentre of Wenchuan earthquake on May 12th,2008.The seismic damage to the dam and the resistance of the dam has drawn great attention.This paper analyzed the response and resistance of the dam to the seismic wave using numerical simulations with comparison to the monitored data.The field investigation after the earthquake and analysis of insitu data record showed that there was only little variation in the opening size at the dam and foundation interface,transverse joints and inducing joints before and after the earthquake.The overall stability of the dam abutment resistance body was quite good except a little relaxation was observed.The results of the dynamic finite element method(FEM) showed that the sizes of the openings obtained from the numerical modeling are comparable with the monitored values,and the change of the opening size is in millimeter range.This study revealed that Shapai arch dam exhibited high seismic resistance and overload capacity in the Wenchuan earthquake event.The comparison of the monitored and simulated results showed that the numerical method applied in this paper well simulated the seismic response of the dam.The method could be useful in the future application on the safety evaluation of RCC dams.

STUDY ON METHODS OF LAND USE DYNAMIC MONITORING AT COUNTY LEVEL──Taking Dehui County, Jilin Province for Example

Remote sensing technique has played an important role in land use dynamic monitoring, but as for the land use dynamic monitoring at county level, traditional remote sensing methods such as satellite imagery visual interpretation and computer classification can not meet its demand for accuracy. The result of 1:10 000 land use investigation map has high accuracy, but this method can not be used to dynamically monitor the land use because of its big expenses, long period and difficulty in updating data. In this paper, the characteristics of physiognomy, climate and the status of land use in Dehui County are taken into consideration and a set of method, which takes use of 3S techniques and applies to Northeast China Plain, is come up with. When the land use type of a land parcel changed as a whole, the date updating can be make by changing its land type ID in the attribute table in a GIS. When the land use type of an irregular area changed, GPS receivers are used to position its border. This set of method is characteristic of high accuracy and low expenses. It gets the information of land use change timely and can be used to dynamically monitor the land use. .

Dynamic monitoring of serum liver function indexes in patients with COVID-19

BACKGROUND Some patients with the novel 2019 coronavirus disease(COVID-19)display elevated liver enzymes.Some antiviral drugs that can be used against COVID-19 are associated with a risk of hepatotoxicity.AIM To analyze the clinical significance of the dynamic monitoring of the liver function of patients with COVID-19.METHODS This was a retrospective study of patients diagnosed with COVID-19 in January and February 2020 at the Department of Infection,Shantou Central Hospital.The exclusion criteria for all patients were:(1)History of chronic liver disease;(2)History of kidney disease;(3)History of coronary heart disease;(4)History of malignancy;or(5)History of diabetes.The serum levels of alanine aminotransferase(ALT),aspartate aminotransferase(AST),γ-glutamyltransferase,and total bilirubin of patients with COVID-19 were measured on days 1,3,7 and 14 after admission,and compared to non-COVID-19 patents.RESULTS Twelve patients with COVID-19(seven men and five women)and twelve controls(eight men and four women)were included.There were one,two,and nine patients with severe,mild,and moderate COVID-19,respectively.There were no differences in age and sex between the two groups(both P>0.05).No significant differences were found in albumin,ALT,AST,γ-glutamyltransferase,or total bilirubin between the controls and the patients with COVID-19 on day 1 of hospitalization(all P>0.05).Serum albumin showed a decreasing trend from days 0 to 7 of hospitalization,reaching the lowest level on day 7.Total bilirubin was higher on day 3 than on day 7.ALT,AST,andγ-glutamyltransferase did not change significantly over time.The severe patient was observed to have ALT levels of 67 U/L and AST levels of 75 U/L on day 7,ALT of 71 U/L and AST of 35 U/L on day 14,and ALT of 210 U/L and AST of 123 U/L on day 21.CONCLUSION Changes in serum liver function indicators are not obvious in the early stage of COVID-19,but clinically significant changes might be observed in severe COVID-19.

Characteristics of Multipath Effects in GPS Dynamic Deformation Monitoring

ABSTRACT The multipath has long been considered a major error source in GPS applications .The characteristics 0f the GPS signal multipath effects are analyzed. based on which an experiment that considers the characteristics of dynamic deformation monitoring has been carried out. The solution results of observation data in two successive days are processed by a method,which combines the wavelet filtering and the differential correction betweentwo successive days. The research demonstrates that the multipath errors have stronger repeatability on successive days;after significantly mitigating the influence of multipath effects,the accuracy of three-dimensional positioning for GPS dynamic deformation monitoring can attain the mm level,an obvious accuracy improving particularly invertical component.The characteristics of GPS signal multipath,th eexperimental scheme and the qualitative and quantitative analysis of results are detailed.

Dynamic Deformation Monitoring for Long-Span Bridges under Construction and EMD De-noising Method

Construction progress of long-span bridge is complicated and the quality control is strict. Any disadvantage during construction may potentially affect the internal forces and deck alignments after it is open to traffic. To exactly evaluate the periodic alignments, internal forces and safety, geometrical and physical monitoring are needed during construction. This study aims at the requirement of dynamic geometric monitoring during Sutong Bridge construction, and introduces the realization and observing schemes of the self-developed GPS real-time dynamic geometrical deformation monitoring system. Affected by wind load and construction circumstance, GPS （global positioning system） monitoring signal contains a variety of noise. And the useful signal can be extracted from the signal after de-noising the noises. A de-noising method based on EMD （empirical mode decomposition） model is introduced here to process the bridge dynamic monitoring data, and with the wavelet threshold de-noising method are compared. The result shows that the EMD method has good adaptability, is free from the choice of wavelet bases and the number of decomposition layer. The method is an effective de-noising method for dynamic deformation monitoring to large-span bridges.

Research on Dynamic Monitoring Algorithm of Visual Safety Distance in Highway

To develop the dynamic monitoring algorithm of visual safety distance in highway, by using the highway video traffic monitoring system, the research platform of four kinds of terrain environment in plateau, mountainous area, plain and coastal area is established. Results show that through the contrast between the sample data and visibility train of thought, based on the theory of mathematical morphology, expressway visibility dynamic monitoring image information system can be established. Based on the theory of the measurement of the basic formula of visibility, the dynamic model of the optimization is established, set up 200 meters distance visual observation target system, research visual range detection algorithm process.

A review of bridge scour monitoring techniques

The high profile failure of the Malahide Viaduct in Dublin, Ireland, which is a part of the EU TEN-T network of critical transport links, was caused by foundation scour. Scour is a common soil-structure interaction problem. In light of current changes in climate, increasing frequency of flooding, coupled with the increasing magnitude of these flood events, will lead to a higher risk of bridge failure. Moni- toring scour is of paramount importance to ensure the continued safe operation of the aging bridge asset network. Most monitoring regimes are based on expensive underwater instrumentation that can often be subjected to damage during times of flooding, when scour risk is at its highest. This paper presents a critical review of existing scour monitoring equipments and methodologies with a particular focus on those using the dynamic response of the structure to indicate the existence and severity of the scour phenomenon affecting the structure. A sensitivity study on a recently developed monitoring method is also undertaken.

Mining subsidence monitoring using the method of combining InSAR and GPS technology

Attempted to conduct a dynamic monitoring research on coal mining subsidence in western mining areas by using the method of combining D-InSAR and GPS technology. The observation points were installed on the main section and the three-dimensional coordinates of the points were measured by using the method of dynamic differential GPS. Meanwhile, the radar images of this subsidence area were processed by using the method of interferometry with daris software, and the interferogram of the subsidence area was obtained. Through this study, the GPS monitoring data and the InSAR deformation data were integrated and the dynamic subsidence contours of the experimental area were obtained. GPS/InSAR fusion technology provides a new technological means for large-scale dynamic monitoring of coal mining subsidence in western mountainous mining areas and shows good application prospects in coal mining subsidence monitoring and disaster warning.

Monitoring the spontaneous wetting process of hydrophobic microporous membrane assisted by alternating current impedance spectroscopy

In the process of membrane absorption,spontaneous wetting of hydrophobic microporous membrane causes membrane modification and increases membrane phase mass transfer resistance,which have attracted wide interest.However,due to the limitations of previous testing methods,the study of the spontaneous membrane wetting process is limited.Herein,we present a method for monitoring spontaneous membrane wetting by measuring its alternating current(AC)impedance.The impedance tests of the PVDF flat membranes and hollow fiber membranes were conducted in a two-electrode system.The results of equivalent circuit fitting indicate that the impedance value of the unwetted membrane is about 1.02×10^(10)Ω,which is close to the theoretical value of 1.4×10^(10)Ω,and this method can quantify the electrochemical impedance value of membranes with different degrees of spontaneous wetting.In addition,a method of impedance test for real-time monitoring of spontaneous wetting was designed.During the experiment,the timeliness and continuity of this method are confirmed with exact judgment under different conditions.In future work,the impedance data will be used to build model to predict the percentage of membrane wetting degree.

Experimental research on daily deformation monitoring of steel box girder bridge based on BDS/GPS

In order to investigate the feasibility of BDS/GPS in the deformation monitoring of long-span bridges,analysis and research on aspects like number of visible satellites,PDOP value and monitoring precision are carried out. To analyze daily deformation characteristics of steel box girder bridge,observation data for 48 consecutive hours is computed by self-programmed software. Experiment results show that the monitoring-points on the bridge demonstrate obvious periodicity and recoverability in vertical and horizontal directions,meanwhile,changes in the elevation direction are relatively stable. The deformation-monitoring results of BDS/GPS combination system and GPS single system show good consistency. However,in a complex environment of the bridge,especially under the condition that satellite signals are severely affected,the advantages of BDS/GPS combination over GPS single system are more obvious.

Key Problems and Countermeasures in CO_(2)Flooding and Storage

Based on literature research in combination with the practice of CO_(2)flooding and storage in Jilin Oilfield,this study assesses the key problems in CO_(2)flooding and storage,proposing the corresponding countermeasures from five aspects of CO_(2)gas source condition,namely geological condition evaluation,scheme design incoordination with other production methods,economic and effectiveness evaluation,together with dynamic monitoring and safety evaluation.The results show that CO_(2)flooding is the most economic and effective CO_(2)storage method.In eastern China,inorganic origin CO_(2)gas reservoirs are widely developed and are especially the most enriched in the Paleozoic carbonate rock strata and the Cenozoic Paleogene–Neogene system,which provide a rich resource base for CO_(2)flooding and storage.In the future,CO_(2)generated in the industrial field will become the main gas source of CO_(2)flooding and storage.The evaluation of geological conditions of oil and gas reservoirs is the basis for the potential evaluation,planning scheme design and implementation of CO_(2)flooding and storage.CO_(2)storage should be below the depth of 800 m,the CO_(2)flooding and storage effects in lowpermeability oil reservoirs being the best.CO_(2)geological storage mechanisms primarily consist of tectonic geological storage,bound gas storage,dissolution storage,mineralization storage,hydrodynamic storage and coalbed adsorption storage.The practice of CO_(2)flooding and storage in Jilin Oilfield demonstratesthat the oil increment by CO_(2)flooding is at least 24%higher than by conventional water flooding.The most critical factor determining the success or failure of CO_(2)flooding and storage is economic effectiveness,which needs to be explored from two aspects:the method and technology innovation along with the carbon peaking and carbon neutrality policy support.After CO_(2)is injected into the reservoir,it will react with the reservoir and fluid,the problem of CO_(2)recovery or overflow will occur,so the dynamic monitoring and safety evaluation of CO_(2)flooding and storage are very important.This study is of great significance to the expansion of the application scope of CO_(2)flooding and storage and future scientific planning and deployment.

Monitoring the Deformation of Cableways

One type of aerial cableway consists of a continuous cable,which works at the same time as carrying cable and drawing cable.This kind of cableway is supported by many towers,which divide the total length in linear sections.Even small deviations from the planed layout can increase the strain of the cable and the danger of derailments.The deviations of the position of the towers from the planed layout are due to local sliding or sinking of the foundation or other mechanical movements.Up to now the axis of the cableways were periodically measured by traditional methods.The goal of this project is to demonstrate the possibility of measuring the axis of a cableway with GPS techniques,while the cable is moving.The results show that the proposed measuring device provides precise results in a simple and reliable way.