Neutronics analysis of a subcritical blanket system driven by a gas dynamic trap-based fusion neutron source for ^(99)Mo production

Gamma-emitting radionuclide ^(99m)Tc is globally used for the diagnosis of various pathological conditions owing to its ideal single-photon emission computed tomography (SPECT) characteristics.However,the short half-life of ^(99m)Tc (T_(1/2)=6 h)makes it difficult to store or transport.Thus,the production of ^(99m)Tc is tied to its parent radionuclide ^(99)Mo (T_(1/2)=66 h).The major production paths are based on accelerators and research reactors.The reactor process presents the potential for nuclear proliferation owing to its use of highly enriched uranium (HEU).Accelerator-based methods tend to use deuterium–tritium(D–T) neutron sources but are hindered by the high cost of tritium and its challenging operation.In this study,a new ^(99)Mo production design was developed based on a deuterium–deuterium (D–D) gas dynamic trap fusion neutron source (GDT-FNS) and a subcritical blanket system (SBS) assembly with a low-enriched uranium (LEU) solution.GDT-FNS can provide a relatively high-neutron intensity,which is one of the advantages of ^(99)Mo production.We provide a Monte Carlo-based neutronics analysis covering the calculation of the subcritical multiplication factor (k_(s)) of the SBS,optimization design for the reflector,shielding layer,and ^(99)Mo production capacity.Other calculations,including the neutron flux and nuclear heating distributions,are also provided for an overall evaluation of the production system.The results demonstrated that the SBS meets the nuclear critical safety design requirement (k_(s)<0.97) and maintained a high ^(99)Mo production capacity.The proposed system can generate approximately 157 Ci ^(99)Mo for a stable 24 h operation with a neutron intensity of 1×10^(14) n/s,which can meet 50%of China’s demand in 2025.

Dynamic Economic Scheduling with Self-Adaptive Uncertainty in Distribution Network Based on Deep Reinforcement Learning

Traditional optimal scheduling methods are limited to accurate physical models and parameter settings, which aredifficult to adapt to the uncertainty of source and load, and there are problems such as the inability to make dynamicdecisions continuously. This paper proposed a dynamic economic scheduling method for distribution networksbased on deep reinforcement learning. Firstly, the economic scheduling model of the new energy distributionnetwork is established considering the action characteristics of micro-gas turbines, and the dynamic schedulingmodel based on deep reinforcement learning is constructed for the new energy distribution network system with ahigh proportion of new energy, and the Markov decision process of the model is defined. Secondly, Second, for thechanging characteristics of source-load uncertainty, agents are trained interactively with the distributed networkin a data-driven manner. Then, through the proximal policy optimization algorithm, agents adaptively learn thescheduling strategy and realize the dynamic scheduling decision of the new energy distribution network system.Finally, the feasibility and superiority of the proposed method are verified by an improved IEEE 33-node simulationsystem.

An Investigation of Error Sources in Computational Fluid Dynamics Modelling of a Co-current Spray Dryer

The paper is focused on identifying error sources in computational fluid dynamics(CFD) predictions of a spray drying process. Seven groups of drying and atomisation parameters were selected for analysis and 13simulation trials were performed. The theoretical results were compared with experimental data and sensitivity of the simulation results to the analysed factors was determined. The following parameters affecting the accuracy of CFD spray modelling were found: gas turbulence model, particle dispersion, atomising air, initial parameters of atomisation and heat losses to the environment. A major difference in the errors committed during modelling of spray drying process for fine and coarse sprays was observed.

Static and Dynamic Indicators in the Analysis of Internal Sources of Companies＇ Investments Financing

The Republic of Serbia is characterized by an unsatisfactory macroeconomic environment. Under the conditions of an evident shortage of liquid assets, the financial capital has moved from real to the financial sector, which led companies to over-indebtedness and shutdown of their own capacities. Therefore, capital investments largely depend on internal financing sources and the ability of companies to internally generate funds for investments. In this regard, an emphasis is placed on the difference in the assessment of the company＇s investment capacity based on internal financing sources, which are measured using static and dynamic indicators in order to prove the necessity of applying dynamic coefficients, which are unfortunately not present in our domestic practice. The paper examines and proves the advantages of the use of the dynamic approach for such analyses using the example of energy sector, which is one of the most important branches in Serbian economy.

A Dynamic Solution for Document Redundancies in Multiple Sources

With the development of IT,more andmore document resources are available over the Internet.Inorder to facilitate users’retrieval of the digital documents,Integrations of the multi source systems are necessary,Sincethe individual sources collect their information independently,the same papers may be stored in different source systems.The traditional solutions to the redundancy problems in thedistributed environments are usually based on the globalcatalogs which keep the redundancy information for thesyst...

Dynamic corner frequency in source spectral model for stochastic synthesis of ground motion

The static comer frequency and dynamic comer frequency in stochastic synthesis of ground motion from fi- nite-fault modeling are introduced, and conceptual disadvantages of the two are discussed in this paper. Furthermore, the non-uniform radiation of seismic wave on the fault plane, as well as the trend of the larger rupture area, the lower comer frequency, can be described by the source spectral model developed by the authors. A new dynamic comer frequency can be developed directly from the model. The dependence of ground motion on the size of subfault can be eliminated if this source spectral model is adopted in the synthesis. Finally, the approach presented is validated from the comparison between the synthesized and observed ground motions at six rock stations during the Northridge earthquake in 1994.

Role of permafrost in resilience of social-ecological system and its spatio-temporal dynamics in the source regions of Yangtze and Yellow Rivers

Permafrost is one of the key components of terrestrial ecosystem in cold regions. In the context of climate change, few studies have investigated resilience of social ecological system(SER) from the perspective of permafrost that restricts the hydrothermal condition of alpine grassland ecosystem. In this paper, based on the structural dynamics, we developed the numerical model for the SER in the permafrost regions of the source of Yangtze and Yellow Rivers, analyzed the spatial-temporal characteristics and sensitivity of the SER, and estimated the effect of permafrost change on the SER. The results indicate that: 1) the SER has an increasing trend, especially after 1997, which is the joint effect of precipitation, temperature, NPP and ecological conservation projects; 2) the SER shows the spatial feature of high in southeast and low in northwest,which is consistent with the variation trends of high southeast and low northwest for the precipitation, temperature and NPP, and low southeast and high northwest for the altitude; 3) the high sensitive regions of SER to the permafrost change have gradually transited from the island distribution to zonal and planar distribution since 1980, moreover, the sensitive degree has gradually reduced; relatively, the sensitivity has high value in the north and south, and low value in the south and east; 4) the thickness of permafrost active layer shows a highly negative correlation with the SER. The contribution rate of permafrost change to the SER is-4.3%, that is, once the thickness of permafrost active layer increases 1 unit, the SER would decrease 0.04 units.

Study of energy-efficient heat resistance and cooling technology for high temperature working face with multiple heat sources in deep mine

In the present research,we proposed a scheme to address the issues of severe heat damage,high energy consumption,low cooling system efficiency,and wastage of cold capacity in mines.To elucidate the seasonal variations of environmental temperature through field measurements,we selected a high-temperature working face in a deep mine as our engineering background.To enhance the heat damage control cability of the working face and minimize unnecessary cooling capac-ity loss,we introduced the multi-dimensional heat hazard prevention and control method called"Heat source barrier and cooling equipment".First,we utilize shotcrete and liquid nitrogen injection to eliminate the heat source and implemented pressure equalization ventilation to disrupt the heat transfer path,thereby creating a heat barrier.Second,we establish divi-sional prediction models for airflow temperature based on the variation patterns obtained through numerical simulation.Third,we devise the location and dynamic control strategy for the cooling equipment based on the prediction models.The results of field application show that the heat resistance and cooling linkage method comply with the safety requirement throughout the entire mining cycle while effectively reducing energy consumption.The ambient temperature is maintained below 30℃,resulting in the energy saving of 10%during the high-temperature period and over 50%during the low-temperature period.These findings serve as a valuable reference for managing heat damage in high-temperature working faces.

Dynamic character analysis for the arc welding power source based on fuzzy logic

A lot of experimental methods have been brought forth to assess the dynamic character of the arc welding power source, but up to now, this issue has not been solved very well. In this paper, based on the fuzzy logic reasoning method, a dynamic character assessing model for the arc welding power source was established and used to analyze the dynamic character of the welding power source. Three different types of welding machine have been tested, and the characteristic information of the electrical signals such as re-striking arc voltage, low welding current and so on of the welding process were extracted accurately by using a self-developed welding dynamic arc wavelet analyzer. The experimental results indicate that this model can be used as a new assessing method for the dynamic character of the arc welding power source.

Physics Analysis and Optimization Studies for a Fusion Neutron Source Based on a Gas Dynamic Trap

To further investigate the fusion neutron source based on a gas dynamic trap （GDT）, characteristics of the GDT were analyzed and physics analyses were made for a fusion neutron source based on the GDT concept. The prior design of a GDT-based fusion neutron source was optimized based on a refreshed understanding of GDT operation. A two-step progressive development route of a GDT-based fusion neutron source was suggested. Potential applications of GDT are discussed. Preliminary analyses show that a fusion neutron source based on the GDT concept is suitable for plasma-material interaction research, fusion material and subcomponent testing, and capable of driving a proof-of-principle fusion fission hybrid experimental facility.

Investigation on automated loading of dynamic 3D heat source model for welding simulation

Since programing complex and dynamic heat source model for welding simulation is a complex job,the parametric methods are studied in this paper.Firstly,an overall flow to achieve automatically modeling welding was introduced.Secondly,an expert module rule for selecting welding heat source model was founded,which is based on simulation knowledge and experiences.Thirdly,a modularity routine method was investigated using writing with C++programing,which automatically creates subroutines of 3D dynamic heat source model for user.To realize the dynamic weld path,the local weld path coordinate system was moved in the global coordinate system and it is used to model the direction of weld gun,welding path and welding pose.The weld path data file was prepared by the automatic tool for the welding heat source subroutines.All above functions were integrated in the user interface and the connection with architecture was introduced.At last,a laser beam welding heat source modeling was automatically modeled and the weld pool geometry was compared with the reported literature.It demonstrated that the automated tool is valid for welding simulation.Since modeling became convenient for welding simulation using the tool proposed,it could be easy and useful for welding engineers to acquire the needed information.

Dynamic assessment of pollution risk of groundwater source area in Northern China

Based on the dynamic analysis and research of pollution risk of groundwater sources, this paper creates the dynamic assessment method of pollution risk of groundwater source area under the theory of "source-pathway-receptor", and applies this method to one typical fissure karst groundwater source area in northern China. Following the 30-year petroleum pollutant migration simulation and pollution risk assessment of groundwater source area, this study finds that the very high risk zone is mainly located in Q Petrochemical Company and the surrounding area and the area adjacent to River Z. Within this period of thirty years, the pollution risk of groundwater source area has showed a dynamic trend that features an inverted "V" shape. The ratio of very high risk zone to the total area will be 18.1%, 17.47% and 16.62% during the tenth year, the twentieth year and the thirtieth year separately, and will reach the highest level of 19.45% during the fifteenth year. Meanwhile, the vertical migration distance of pollutant centre concentration changed from the surface soil at the outset to the deepest point of about 250 meters underground during the tenth year. The results of this risk assessment indicate the dynamic feature of pollution risk. The dilution, degradation and migration of petroleum pollutants in groundwater system contribute to an ultimate decline in pollution risk.

Temporal-spatial Variations of Dynamic Source Parameters in the Capital Circle Region and Its Surrounding Areas before the 2006 M_S5.1 Wenan Earthquake in Hebei Province

Source spectra,corner frequency and zero frequency amplitudes in near-source conditions were measured using waveform data from 989 earthquakes with magnitudes larger than ML2.0 observed by the Beijing Digital Telemetry Seismic Network in the Capital Circle Region of China and its surrounding areas from January 2002 to June 2006 by the Brune model.Relevant formulas that were used for the calculation of dynamic source parameters include rupture radius,seismic moment,seismic energy,stress drop,and apparent stress.Scaling relations and characteristics of temporal-spatial variations of these dynamic parameters before the MS5.1 Wenan earthquake in Hebei Province that occurred on July 20,2006 were analyzed.Results show that apparent stress,stress drop,and the ratio of seismic energy to the rupture radius had relatively high values in some areas before the Wenan earthquake.These high-value concentration areas were mainly distributed in the North China Plain seismic zone.As is seen from the time curves,parameters,such as apparent stress,stress drop,and ratio of seismic energy to rupture radius underwent significant ascending processes before the Wenan earthquake,but the variation in the corner frequency showed a descending trend.This result might be related to the enhancement of stress in the North China Plain seismic zone before the earthquake.

Numerical simulation research on response characteristics of surrounding rock for deep super-large section chamber under dynamic and static combined loading condition

The stability control of surrounding rock for large or super-large section chamber is a difficult technical problem in deep mining condition.Based on the in-site geological conditions of Longgu coal mine,this paper used the dynamic module of FLAC3D to study the response characteristics of deep super-large section chamber under dynamic and static combined loading condition.Results showed that under the static loading condition,the maximum vertical stress,deformation and failure range are large,where the stress concentration coefficient is 1.64.The maximum roof-to-floor and two-sides deformations are 54.6 mm and 53.1 mm,respectively.Then,under the dynamic and static combined loading condition:(1)The influence of dynamic load frequency on the two-sides is more obvious;(2)The dynamic load amplitude has the greatest influence on the stress concentration degree,and the plastic failure tends to develop to the deeper;(3)With the dynamic load source distance increase,the response of surrounding rock is gradually attenuated.On this basis,empirical equations for each dynamic load conditions were obtained by using regression analysis method,and all correlation coefficients are greater than 0.99.This research provided reference for the supporting design of deep super-large section chamber under same or similar conditions.

GLOBAL L~∞ SOLUTIONS TO SYSTEM OF ISENTROPIC GAS DYNAMICS IN A DIVERGENT NOZZLE WITH FRICTION

In this article, we study the global L^∞ entropy solutions for the Cauchy problem of system of isentropic gas dynamics in a divergent nozzle with a friction. Especially when the adiabatic exponent γ=3, we apply for the maximum principle to obtain the L^∞ estimates w(ρ^δ,ε, u^δ,ε)≤ B(t) and z(ρ^δ,ε, u^δ,ε)≤ B(t) for the viscosity solutions (ρ^δ,ε, u^δ,ε), where B(t) is a nonnegative bounded function for any finite time t. This work, in the special case γ≥ 3, extends the previous works, which provided the global entropy solutions for the same Cauchy problem with the restriction w(ρ^δ,ε, u^δ,ε)≤ 0 or z(ρ^δ,ε, u^δ,ε)≤ 0.

Types, Evolution and Pool-Controlling Significance of Pool Fluid Sources in Superimposed Basins:A Case Study from Paleozoic and Mesozoic in South China

Having multiple tectonic evolution stages, South China belongs to a superimposed basin in nature. Most marine gas pools became secondary pools. The pool fluid sources serve as the principal pool-controlling factors. On the basis of eight typical petroleum pools, the type, evolution in time-space, and the controlling of petroleum distribution of pool fluid sources are comprehensively analyzed. The main types of pool fluid sources include hydrocarbon, generated primarily and secondly from source rocks, gas cracked from crude oil, gas dissolved in water, inorganic gas, and mixed gases. In terms of evolution, the primary hydrocarbon was predominant prior to Indosinian; during Indosinian to Yenshanian the secondary gas includes gas cracked from crude oil, gas generated secondarily, gas dissolved in water, and inorganic gas dominated; during Yenshanian to Himalayan the most fluid sources were mixed gases. Controlled by pool fluid sources, the pools with mixed gas sources distributed mainly in Upper Yangtze block, especially Sichuan （四川） basin; the pools with primary hydrocarbon sources distributed in paleo-uplifts such as Jiangnan （江南）, but most of these pools became fossil pools; the pools with secondary hydrocarbon source distributed in the areas covered by Cretaceous and Eogene in Middle-Lower Yangtze blocks, and Chuxiong （楚雄）, Shiwandashan （十万大山）, and Nanpanjiang （南盘江） basins; the pools with inorganic gas source mainly formed and distributed in tensional structure areas.

Dynamic Interaction of Parallel Moving Ships in Close Proximity

Nowadays,there are many studies conducted in the field of marine hydrodynamics which focus on two vessels traveling and floating in sufficiently close proximity to experience significant interactions.The hydrodynamic behavior of parallel moving ships in waves is an interesting and important topic of late.A numerical investigation has been carried out for the prediction of wave exciting forces and motion responses of parallel moving ships in regular waves.The numerical solution was based on 3D distribution technique and using the linear wave theory to determine the exciting forces and ship＇s motion.The speed effects have been considered in the Green function for more realistic results.The numerical computations of wave exciting forces and motion responses were carried out for a Mariner and Series 60 for the purpose of discovering different Froude numbers and different separation distances in head sea conditions.Based on the numerical computations,it was revealed that the sway,roll and yaw have a significant effect due to hydrodynamic interaction.

Analysis of the role of branching angle in the dynamic rupture process on a 3-D branching fault system

The fault branching phenomenon,which may heavily influence the patterns of rupture propagation in fault systems,is one of the geometric complexities of fault systems that is widely observed in nature.In this study,we investigate the effect of the branching angle on the rupture inclination and the interaction between branch planes in two-fork branching fault systems by numerical simulation and theoretical analysis based on Mohr’s circle.A friction law dependent on normal stress is used,and special attention is paid to studying how ruptures on the upper and lower branch planes affect the stress and rupture on each other separately.The results show that the two branch planes affect each other in different patterns and that the intensity of the effect changes with the branching angle.The rupture of the lower branch plane has a negative effect on the rupture of the upper branch plane in the case of a small branching angle but has almost no negative effect in the case of a large branching angle.The rupture of the upper branch plane,however,suppresses the rupture of the lower branch plane regardless of whether the branching angle is large or small.

Failure mechanism and coupled static-dynamic loading theory in deep hard rock mining: A review

Rock failure phenomena,such as rockburst,slabbing(or spalling) and zonal disintegration,related to deep underground excavation of hard rocks are frequently reported and pose a great threat to deep mining.Currently,the explanation for these failure phenomena using existing dynamic or static rock mechanics theory is not straightforward.In this study,new theory and testing method for deep underground rock mass under coupled static-dynamic loading are introduced.Two types of coupled loading modes,i.e.'critical static stress + slight disturbance' and 'elastic static stress + impact disturbance',are proposed,and associated test devices are developed.Rockburst phenomena of hard rocks under coupled static-dynamic loading are successfully reproduced in the laboratory,and the rockburst mechanism and related criteria are demonstrated.The results of true triaxial unloading compression tests on granite and red sandstone indicate that the unloading can induce slabbing when the confining pressure exceeds a certain threshold,and the slabbing failure strength is lower than the shear failure strength according to the conventional Mohr-Column criterion.Numerical results indicate that the rock unloading failure response under different in situ stresses and unloading rates can be characterized by an equivalent strain energy density.In addition,we present a new microseismic source location method without premeasuring the sound wave velocity in rock mass,which can efficiently and accurately locate the rock failure in hard rock mines.Also,a new idea for deep hard rock mining using a non-explosive continuous mining method is briefly introduced.