Evaluation of the possible slip surface of a highly heterogeneous rock slope using dynamic reduction method

A new method, the dynamic reduction method(DRM) combined with the strain-softening method, was applied to evaluate the possible slip surface of a highly heterogeneous rock slope of the Dagangshan hydropower station in Southwest China.In DRM, only the strength of the failure elements is reduced and the softening reduction factor K is adopted to calculate the strength parameters. The simulation results calculated by DRM show that the further slip surface on the right slope of the Dagangshan hydropower station is limited in the middle part of the slope, while both SRM(strength reduction method) and LEM(limit equilibrium method) predict a failure surface which extends upper and longer. The observations and analysis from the three recorded sliding events indicate that the failure mode predicted by DRM is more likely the scenario.The results in this study illustrate that for highly heterogeneous slopes with geological discontinuities in different length scales, the proposed DRM can provide a reliable prediction of the location of the slip surface.

Progressive Modelling of the Gravity-induced Landslide Using the Local Dynamic Strength Reduction Method

The failure of slope is a progressive process, and the whole sliding surface is caused by the gradual softening of soil strength of the potential sliding surface. From this viewpoint, a local dynamic strength reduction method is proposed to capture the progressive failure of slope. This method can calculate the warning deformation of landslide in this study. Only strength parameters of the yielded zone of landslide will be reduced by using the method. Through continuous local reduction of the strength parameters of the yielded zone, the potential sliding surface developed gradually and evolved to breakthrough finally. The result shows that the proposed method can simulate the progressive failure of slope truly. The yielded zone and deformation of landslide obtained by the method are smaller than those of overall strength reduction method. The warning deformation of landslide can be obtained by using the local dynamic strength reduction method which is based on the softening characteristics of the sliding surface.

Optimization Analysis on Dynamic Reduction Algorithm

On the basis of rough set theory, the strengths of dynamic reduction are elaborated compared with traditional non-dynamic methods. A systematic concept of dynamic reduction from sampling process to the generation of the reduct set is presented. A new method of sampling is created to avoid the defects of being too subjective. And in order to deal with the over-sized time consuming problem in traditional dynamic reduction process, a quick algorithm is proposed within the constraint conditions. We have also proved that dynamic core possesses the essential characteristics of a reduction core on the basis of the formalized definition of the multi-layered dynamic core.

Dynamic Soft Reduction for Continuously Cast Rail Bloom

Center porosity and centerline segregation in continuously cast bloom can be minimized by the well-known method of dynamic soft reduction. Metallurgical results of soft reduction previously employed in continuous bloom casting for heavy rail steel in Panzhihua Iron and Steel Group were not fully achieved because of the improper soft reduction process. Therefore, experiments for optimizing the process parameters of soft reduction for bloom were carried out. The results show that the proportion of the center porosity, which is less than 1.0, increases from 28.41% to 99.81%, while the proportion of the centerline segregation class increases from 40.91% to 100%, and the proportion of the central cavity increases from 92.05% to 100%, whereas the center carbon segregation index decreases from 1.17 to 1.05. The internal quality and the mechanical performance of the rails produced from continuously cast blooms meet the requirement of high-speed tracks of 350 km/h.

SMART/ASTC dynamic soft reduction technology and its application on the bloom continuous caster at Pangang

The SMART/ASTC dynamic soft reduction technology of VAI and its application on the 6-strand bloom continuous caster at Pangang, China are presented. The operation results show that soft reduction technology is effective to improve the inner quality of continuously cast blooms. At Pangang, both the central porosity and the central segregation ratings are no more than 1.0, the central shrinkage cavity rating is no more than 0.5, and the central segregation index of carbon is no more than 1.05. Rails made from the blooms have excellent quality and are used for high-speed tracks.

Application of strength reduction method to dynamic anti-sliding stability analysis of high gravity dam with complex dam foundation

Considering that there are some limitations in analyzing the anti-sliding seismic stability of dam-foundation systems with the traditional pseudo-static method and response spectrum method, the dynamic strength reduction method was used to study the deep anti-sliding stability of a high gravity dam with a complex dam foundation in response to strong earthquake-induced ground action. Based on static anti-sliding stability analysis of the dam foundation undertaken by decreasing the shear strength parameters of the rock mass in equal proportion, the seismic time history analysis was carried out. The proposed instability criterion for the dynamic strength reduction method was that the peak values of dynamic displacements and plastic strain energy change suddenly with the increase of the strength reduction factor. The elasto-plastic behavior of the dam foundation was idealized using the Drucker-Prager yield criterion based on the associated flow rule assumption. The result of elasto-plastic time history analysis of an overflow dam monolith based on the dynamic strength reduction method was compared with that of the dynamic linear elastic analysis, and the reliability of elasto-plastic time history analysis was confirmed. The results also show that the safety factors of the dam-foundation system in the static and dynamic cases are 3.25 and 3.0, respectively, and that the F2 fault has a significant influence on the anti-sliding stability of the high gravity dam. It is also concluded that the proposed instability criterion for the dynamic strength reduction method is feasible.

A Power Reduction Method for Pilot Channel of LEO Satellite Based on Dynamic Compensation

Since the lower power requirement of code division multiple access(CDMA) than that of other multiple access, the CDMA technology is suitable to be used in low earth orbit(LEO) satellite communication system whose space power is limited due to the small size of satellite. The pilot channel of CDMA technology is very important for earth mobile station(EMS) in LEO system to recover carrier and code, but the power requirement of pilot channel is very higher than that of other channels. In this paper, a power reduction method for pilot channel is proposed. By the new method, the power of pilot channel transmitted from LEO satellite is reduced to a lower level. For improving the signal to noise ratio(SNR) of pilot channel with lower power, coherent integration is employed in EMS at the pre-processing stage. Considering the high dynamic situation of LEO satellite, the long period of time for integration will deteriorate the receiving performance of EMS, therefore, a dynamic compensation module is added to carrier tracking loop against the high dynamic. Meanwhile, the transfer function of the new tracking loop and the condition for steadystate zero error are deduced. Numerical examples are provided to demonstrate effectiveness of the proposed approach.

Application of dynamic analysis of strength reduction in the slope engineering under earthquake

At present,the methods of analyzing the stability of slope under earthquake are not accurate and reasonable because of some limitations. Based on the real dynamic tensile-shear failure mechanism of slope,the paper proposes dynamic analysis of strength reduction FEM (finite element method) and takes the reduction of shear strength parameters and tensile strength parameters into consideration. And it comprehensively takes the transfixion of the failure surface,the non-convergence of calculation and mutation of displacement as the criterion of dynamic instability and failure of the slope. The strength reduction factor under limit state is regarded as the dynamic safety factor of the slope under earthquake effect and its advantages are introduced. Finally,the method is applied in the seismic design of anchors supporting and anti-slide pile supporting of the slope. Calculation examples show that the application of dynamic analysis of strength reduction is feasible in the seismic design of slope engineering,which can consider dynamic interaction of supporting structure and rock-soil mass. Owing to its preciseness and great advantages,it is a new method in the seismic design of slope supporting.

Modeling and control of dynamic soft reduction in continuous slab casting

The centerline segregation in continuous casting steel is known to be formed by the interdendritic enriched liquid flow at the solidification end in strand.At present,several methods,such as thermal soft reduction, electromagnetic stirring and dynamic soft reduction,are available to reduce the center segregation and to improve the internal quality.Although some methods could alleviate center segregation to some extent,they can also give rise to new problems.For instance,thermal soft reduction can lead to surface cracking during casting of some steels and electromagnetic stirring can result in white band.Dynamic soft reduction is an effective technology for the improvement of strand quality in continuous slab casting.In this paper,the key parameters of dynamic soft reduction technology,such as soft reduction region,the total reduction amount,for low carbon steel have been studied based on experimental and theoretical analysis.The soft reduction region was related to the segregation of chemical composition,slab bulging of narrow side and avoiding internal crack of slab.The total reduction amount was composed of natural thermal shrinkage and actual reduction amount depending on critical strain.For low carbon steel with slab dimension of(950 - 1 950) mm×170 mm,the solid fraction range in soft reduction region was recommended from 0.4 to 0.8,the total reduction amount was 2.0 -2.8 mm,and the optimized reduction rate was 0.4 - 1.2 mm/min,respectively.Furthermore,a dynamic soft reduction system in continuous slab casting, Visual Cast-Dynamic,has been developed by multithreading method.It demonstrated that the dynamic soft reduction model in this study was correct with the ability of online control.

Analysis of structural dynamic characteristics of a high speed light special catamaran

In this paper,structural dynamic characteristics of a high-speed light special catamaran-wave piercing catamaran are analyzed using the FEA software MSC-NASTRAN. The dynamic reduction method is introduced to eliminate the local vibration modes in order to obtain the whole ship＇s mode shapes. In the post-processor, a lot of accessorial methods are adopted to eliminate the local vibrations, so that the whole ship＇s mode shapes can be identified. The modal analysis indicates that the dynamic reduction method fits for mode shapes identifying. In the end,the test results of a catamaran named Frederick G. Greed are used for reference to validate the obtained results. The comparison process shows that the results are credible. A special mode shape, which is quite different with that of conventional monohull ship, is also pointed out. The obtained results provide a valuable reference for the coming computation of catamaran＇s vihration characteristics.

Methods of reduction for Lagrange systems on time scales with nabla derivatives

The Routh and Whittaker methods of reduction for Lagrange system on time scales with nabla derivatives are studied.The equations of motion for Lagrange system on time scales are established, and their cyclic integrals and generalized energy integrals are given. The Routh functions and Whittaker functions of Lagrange system are constructed, and the order of differential equations of motion for the system are reduced by using the cyclic integrals or the generalized energy integrals with nabla derivatives. The results show that the reduced Routh equations and Whittaker equations hold the form of Lagrnage equations with nabla derivatives. Finally, two examples are given to illustrate the application of the results.

Dynamic Soft Reduction Technology for Bloom Casting

The dynamic soft reduction technology for 360 mm×450 mm bloom casting and its application results at Panzhihua Iron and Steel Co （PISCO） were presented. In order to analyze the influence of the soft reduction on internal defects of bloom, such as center porosity and central segregation, experiment for contrasting process with or without soft reduction for bloom was conducted. The operation shows that after applying the soft reduction of alloy steel 45CrMnMo bloom, the ratio of center porosity whose defect level is less than or equal to 1.0 increased from 66.67% to 85.71%, ratio of central segregation whose defect level is below 1.0 increased from 94.44% to 100%, ratio of central shrinkage cavity which is free increased from 88.89% to 96.42%, and central segregation index of carbon decreased from mean value of 1.15 to 1.05.

Control Model of Bloom Dynamic Soft Reduction

There are significant effects of process parameters on internal qualities of bloom, and these process parameters are as follows. position and reduction amount, reduction distribution, reduction rate, and so on. Developing a control model is the key to apply soft reduction technology successfully. As the research object, 360 mm ×450 mm bloom caster in PISCO （Panzhihua Iron and Steel Co. ） has been studied, and the research method for control model of dynamic soft reduction has been proposed. On the basis of solidification and heat transfer model, the position of soft reduction and reduction distribution of each frame are determined according to the bloom temperature distribution and solid fraction in bloom center calculated. Production practice shows that the ratio of center porosity which is less than or equal to 1.0, increased to 97.27%, ratio of central segregation which is less than or equal to 0.5, increased to 80.91%, and ratio of central carbon segregation index which is more than or equal to 1.10, decreased to 4% with the applying model of dynamic soft reduction.

Asymmetric synthesis of syn-aryl-(2S,3R)-2-chloro-3-hydroxy esters via an engineered ketoreductase-catalyzed dynamic reductive kinetic resolution

We report here a generic,green synthesis of 17 valuable syn-aryl-(2S,3R)-2–chloro-3–hydroxy esters(syn-(2S,3R)-1)in 73%-99%isolated yields along with 6.1:1–83:1 dr and 31%~>99%ee,through dynamic reductive kinetic resolution of racemic arylα–chloroβ-keto esters(2)catalyzed by an engineered ketoreductase which was obtained via ep PCR-based directed evolution.The hectogram scale synthesis of syn-(2S,3R)-1b at a substrate concentration of 120 g/L showcased the application potential of the biocatalytic method developed presently.

A New Clock Gated Flip Flop for Pipelining Architecture

The objective of the work is to design a new clock gated based flip flop for pipelining architecture. In computing and consumer products, the major dynamic power is consumed in the system’s clock signal, typically about 30% to 70% of the total dynamic (switching) power consumption. Several techniques to reduce the dynamic power have been developed, of which clock gating is predominant. In this work, a new methodology is applied for gating the Flip flop by which the power will be reduced. The clock gating is employed to the pipelining stage flip flop which is active only during valid data are arrived. The methodology used in project named Selective Look-Ahead Clock Gating computes the clock enabling signals of each FF one cycle ahead of time, based on the present cycle data of those FFs on which it depends. Similarly to data-driven gating, it is capable of stopping the majority of redundant clock pulses. In this work, the circuit implementation of the various blocks of data driven clock gating is done and the results are observed. The proposed work is used for pipelining stage in microprocessor and DSP architectures. The proposed method is simulated using the quartus for cyclone 3 kit.

CFD Study of NO_x Emissions in a Model Commercial Aircraft Engine Combustor

Air worthiness requirements of the aircraft engine emission bring new challenges to the combustor research and design. With the motivation to design high performance and clean combustor, computational fluid dynamics （CFD） is utilized as the powerful design approach. In this paper, Reynolds averaged Navier-Stokes （RANS） equations of reactive two-phase flow in an experimental low emission combustor is performed. The numerical approach uses an implicit compressible gas solver together with a Lagrangian liquid-phase tracking method and the extended coherent flamelet model for turbulence-combustion interaction. The NOx formation is modeled by the concept of post-processing, which resolves the NOx transport equation with the assumption of frozen temperature distribution. Both turbulence-combustion interaction model and NOx formation model are firstly evaluated by the comparison of experimental data published in open literature of a lean direct injection （LDI） combustor. The test rig studied in this paper is called low emission stirred swirl （LESS） combustor, which is a two-stage model combustor, fueled with liquid kerosene （RP-3） and designed by Beihang University （BUAA）. The main stage of LESS combustor employs the principle of lean prevaporized and premixed （LPP） concept to reduce pollutant, and the pilot stage depends on a diffusion flame for flame stabili-zation. Detailed numerical results including species distribution, turbulence performance and burning performance are qualita-tively and quantitatively evaluated. Numerical prediction of NOx emission shows a good agreement with test data at both idle condition and full power condition of LESS combustor. Preliminary results of the flame structure are shown in this paper. The flame stabilization mechanism and NOx reduction effort are also discussed with in-depth analysis.

Regional inequality, spatial spillover effects, and the factors influencing city-level energy-related carbon emissions in China

Data show that carbon emissions are increasing due to human energy consumption associated with economic development. As a result, a great deal of attention has been focused on efforts to reduce this growth in carbon emissions as well as to formulate policies to address and mitigate climate change. Although the majority of previous studies have explored the driving forces underlying Chinese carbon emissions, few have been carried out at the city-level because of the limited availability of relevant energy consumption statistics. Here, we utilize spatial autocorrelation, Markov-chain transitional matrices, a dynamic panel model, and system generalized distance estimation(Sys-GMM) to empirically evaluate the key determinants of carbon emissions at the city-level based on Chinese remote sensing data collected between 1992 and 2013. We also use these data to discuss observed spatial spillover effects taking into account spatiotemporal lag and a range of different geographical and economic weighting matrices. The results of this study suggest that regional discrepancies in city-level carbon emissions have decreased over time, which are consistent with a marked spatial spillover effect, and a ‘club' agglomeration of high-emissions. The evolution of these patterns also shows obvious path dependence, while the results of panel data analysis reveal the presence of a significant U-shaped relationship between carbon emissions and per capita GDP. Data also show that per capita carbon emissions have increased in concert with economic growth in most cities, and that a high-proportion of secondary industry and extensive investment growth have also exerted significant positive effects on city-level carbon emissions across China. In contrast, rapid population agglomeration, improvements in technology, increasing trade openness, and the accessibility and density of roads have all played a role in inhibiting carbon emissions. Thus, in order to reduce emissions, the Chinese government should legislate to inhibit the effects of factors that promote the release of carbon while at the same time acting to encourage those that mitigate this process. On the basis of the analysis presented in this study, we argue that optimizing industrial structures, streamlining extensive investment, increasing the level of technology, and improving road accessibility are all effective approaches to increase energy savings and reduce carbon emissions across China.