Vibration Reduction by a Partitioned Dynamic Vibration Absorber with Acoustic Black Hole Features

Vibration quality is a vital indicator for assessing the progress of modern equipment.The dynamic vibration absorber(DVA)based on the acoustic black hole(ABH)feature is a new passive control method that manipulates waves.It offers efficient energy focalization and broad-spectrum vibration suppression,making it highly promising for applications in large equipment such as aircraft,trains,and ships.Despite previous advancements in ABH-DVA development,certain challenges remain,particularly in ensuring effective coupling with host structures during control.To address these issues,this study proposes a partitioned ABH-featured dynamic vibration absorber(PABH-DVA)with partitions in the radial direction of the disc.By employing a plate as the host structure,simulations and experiments were conducted,demonstrating that the PABH-DVA outperforms the original symmetric ABH-DVA in terms of damping performance.The study also calculated and compared the coupling coefficients of the two ABH-DVAs to uncover the mechanism behind the enhanced damping.Simulation results revealed that the PABH-DVA exhibits more coupled modes,occasionally with lower coupling coefficients than the symmetric ABH-DVA.The influence of frequency ratio and modal mass was further analyzed to explain the reasons behind the PABH-DVA's superior damping performance.Additionally,the study discussed the impact of the number of slits and their orientation.This research further explains the coupling mechanism between the ABH-DVA and the controlled structure,and provides new ideas for the further application of ABH in engineering.

Study on vibration reduction of two-scale system coupled with dynamic vibration absorber

The dynamic vibration absorber with inerter and grounded stiffness(IGDVA)is used to control a two-scale system subject to a weak periodic perturbation.The vibration suppression effect is remarkable.The amplitude of the main system coupled with absorber is significantly reduced,and the high frequency vibration completely disappears.First,through the slow-fast analysis and stability theory,it is found that the stability of the autonomous system exerts a notable regulating effect on the vibration response of the non-autonomous system.After adding the dynamic vibrator absorber,the center in the autonomous system changes to an asymptotically stable focus,consequently suppressing the vibration in the non-autonomous system.Further research reveals that the parameters of the absorber affect the real parts of the eigenvalues of the autonomous system,thereby regulating the stability of the system.Transitioning from a qualitative standpoint to a quantitative approach,a comparison of the solutions before and after the introduction of the dynamic absorber reveals that,when the grounded stiffness ratio and the mass ratio of the dynamic absorber are not equal,the high-frequency part in the analytical solution disappears.As a result,this leads to a reduction in the amplitude of the trajectory,achieving a vibration reduction effect.

An electromagnetic semi-active dynamic vibration absorber for thin-walled workpiece vibration suppression in mirror milling

As critical components of aircraft skins and rocket fuel storage tank shells,large thin-walled workpieces are susceptible to vibration and deformation during machining due to their weak local stiffness.To address these challenges,we propose a novel tunable electromagnetic semi-active dynamic vibration absorber(ESADVA),which integrates with a magnetic suction follower to form a followed ESADVA(follow-ESADVA)for mirror milling.This system combines a tunable magnet oscillator with a follower,enabling real-time vibration absorption and condition feedback throughout the milling process.Additionally,the device supports self-sensing and frequency adjustment by providing feedback to a linear actuator,which alters the distance between magnets.This resolves the traditional issue of being unable to directly monitor vibration at the machining point due to space constraints and tool interference.The frequency shift characteristics and vibration absorption performance are comprehensively investigated.Theoretical and experimental results demonstrate that the prototyped follow-ESADVA achieves frequency synchronization with the milling tool,resulting in a vibration suppression rate of approximately 47.57%.Moreover,the roughness of the machined surface decreases by18.95%,significantly enhancing the surface quality.The results of this work pave the way for higher-quality machined surfaces and a more stable mirror milling process.

Research on the Damping Mechanism of Time-Delay Coupled Negative Stiffness Dynamic Absorber in Nonlinear Vibration Damping System

A study was conducted on the effect of time delay and structural parameters on the vibration reduction of a time delayed coupled negative stiffness dynamic absorber in nonlinear vibration reduction systems. Taking dynamic absorbers with different structural and control parameters as examples, the effects of third-order nonlinear coefficients, time-delay control parameters, and negative stiffness coefficients on reducing the replication of the main system were discussed. The nonlinear dynamic absorber has a very good vibration reduction effect at the resonance point of the main system and a nearby area, and when 1 increases to a certain level, the stable region of the system continues to increase. The amplitude curve of the main system of a nonlinear dynamic absorber will generate Hop bifurcation and saddle node bifurcation in the region far from the resonance point, resulting in almost periodic motion and jumping phenomena in the system. For nonlinear dynamic absorbers with determined structural parameters, time-delay feedback control can be adopted to control the amplitude of the main system. For different negative stiffness coefficients, there exists a minimum damping point for the amplitude of the main system under the determined system structural parameters and time-delay feedback control parameters.

Dynamical Stability of Cantilevered Pipe Conveying Fluid with Inerter-Based Dynamic Vibration Absorber

Cantilevered pipe conveying fluid may become unstable and flutter instability would occur when the velocity of the fluid flow in the pipe exceeds a critical value.In the present study,the theoretical model of a cantilevered fluid-conveying pipe attached by an inerter-based dynamic vibration absorber(IDVA)is proposed and the stability of this dynamical system is explored.Based on linear governing equations of the pipe and the IDVA,the effects of damping coefficient,weight,inerter,location and spring stiffness of the IDVAon the critical flow velocities of the pipe system is examined.It is shown that the stability of the pipe may be significantly affected by the IDVA.In many cases,the stability of the cantilevered pipe can be enhanced by designing the parameter values of the IDVA.By solving nonlinear governing equations of the dynamical system,the nonlinear oscillations of the pipe with IDVA for sufficiently high flow velocity beyond the critical value are determined,showing that the oscillation amplitudes of the pipe can also be suppressed to some extent with a suitable design of the IDVA.

Analysis of radial stiffness of rubber bush used in dynamic vibration absorber

In order to study the influence of the structural parameters of the rubber bush on its radial stiffness, the constitutive relation of rubber materiel is used to obtain the calculation formula of the dimensionless radial stiffness coefficient. The obtained theoretical result is consistent with previous research results in both long rubber bushes and short rubber bushes. The simulation case was conducted by the finite element method to verify the correctness of the theory. The axial compression experiment was conducted to obtain the parameters needed in the simulation. The result shows that the percentage difference between the theoretical result and the simulation one is only 2.75%. A series of simulations were conducted to compare with previous work, and the largest magnitude of the percentage difference is only about 5%. Finally, the radial stiffness experiment was conducted by using a dynamic vibration absorber, and the influence of the structural parameters of the rubber bush on its radial stiffness is obtained. The result shows that the radial stiffness of the rubber bush increases with the increase in the length and the inner radius, but decreases with the increase in the outer radius.

Design and experiment of an adaptive dynamic vibration absorber with smart leaf springs

An adaptive dynamic vibration absorber(ADVA)is designed for lowfrequency vibration suppression.The leaf springs are applied as the tuning stiffness elements.The principle of variable stiffness is analyzed to obtain the effective range of the first natural frequency variation.A classic simply supported manipulator is selected as the controlled system.The coupled dynamic model of the manipulator-ADVA system is built to obtain the maximum damping efficiency and the vibration absorption capacity of the designed ADVA.An experimental platform is set up to verify the theoretical results.It is revealed that the ADVA can adjust the first natural frequency on a large scale by changing the curvature of the leaf springs.The amplitude of the manipulator is reduced obviously with the installation of the designed ADVA.Finally,based on the short-time Fourier transformation(STFT),a stepwise optimization algorithm is proposed to achieve a quick tuning of the natural frequency of the ADVA so that it can always coincide with the frequency of the prime structure.Through the above steps,the intelligent frequency tuning of the ADVA is realized with high vibration absorption performance in a wide frequency range.

Vibration Suppression of Unbalanced Machines UsingLumped Mass Dynamic Vibration Absorber

The vibration of machines due to rotating parts unbalance disturbs the machine functioning and shortens the lifetime of its parts. A dynamic vibration absorber is a favorite solution to suppress the machine vibration since its implementation does not require any modification neither on the machine nor on its installation. The paper considers an unbalanced machine to which a lumped mass dynamic vibration absorber is attached. Firstly, the machine equipped with the absorber is modeled, and the vibration expressions are extracted. Secondly, an original approach to optimize the absorber parameters is presented, and simulation results are advanced, when the absorber is undamped and damped. Thirdly, the absorber optimal parameters allowing the best vibration reduction of the machine are identified, showing bow the absorber should be designed, when the disturbance frequency is stable or unstable. The results are a significant contribution in the vibration control of unbalanced machines.

Novel approach for active vibration control of a flexible missile

This paper investigates the feasibility of using an active dynamic vibration absorber(ADVA) for active vibration control of a flexible missile system through simulation.Based on the principles of a dynamic vibration absorber(DVA),a ring-type ADVA is first designed to attenuate the elastic vibration of the flexible missile,and the design of the active controller adopts the proportional-integral-derivative(PID)control algorithm.The motion equations of a flexible missile with an ADVA,which is subjected to follower thrust at its aft end,are derived using the Lagrangian approach.Taking the minimum of the root mean square(RMS) of the lateral displacement response of the center of mass as the objective function,a genetic algorithm(GA) is used to optimize the parameter of the DVA and PID controller.The numerical calculations show that the ADVA and DVA are effective in suppressing the vibration and provide approximately 41.2% and 17.6% improvement,respectively,compa red with the case of no DVA,The ADVA has better performance than the DVA,When the missile is subjected to follower thrust,the effect of vibration reduction is more effective than the case without follower thrust.It is feasible to reduce vibration and improve the stability of flexible missiles by means of the ADVA.

Application of dynamic vibration absorber for vertical vibration control of corrugated rolling mill

A variable mass tuned particle absorber is designed for the nonlinear vertical vibration control of the corrugated rolling mill in the composite plate rolling process.Considering the nonlinear damping and nonlinear stiffness between the corrugated interface,a three-degree-of-freedom nonlinear vertical vibration mathematical model of corrugated rolling mill based on dynamic vibration absorber control is established.The multi-scale method is used to solve the amplitude–frequency characteristic curve equation of the installed dynamic vibration absorber(DVA)system.The effects of stiffness coefficient and damping coefficient on the amplitude–frequency characteristic curve are analyzed.The expressions of the dynamic developed factor of the corrugated roll are derived,and the influence laws of mass ratio,frequency ratio and damping ratio on the dynamic amplification factor are analyzed.The optimal parameters of the DVA are obtained by adaptive genetic algorithm.The control effect of the DVA on the nonlinear vertical vibration is studied by numerical simulation.The feasibility of the designed dynamic absorber is verified through experiments.The results show that the designed dynamic absorber can effectively suppress the vertical vibration of the corrugated roller.

Structure-Borne Sound Attenuation at Corner Interface with Dynamic Vibration Absorber Attached

Structure-borne sound attenuation at corner interface of two plates with dynamic vibration absorber attached is investigated by wave approach.Equations governing transmission and reflection coefficients are deduced by introducing some non-dimensional coefficients,which help to reveal the physical sense inside and to simplify the analysis.Numerical investigation on vibration energy transmission of bending wave is carried out as well.The results from measurement and prediction show almost the same trends in the simplified experiment.It is found that energy transmission at corner interface depends greatly on whether the dynamic vibration absorber attached acts at resonance and is relatively lower right after the nature frequency of dynamic vibration absorber.Furthermore,the dynamic vibration absorber attached provides less energy transmission of bending wave than blocking mass at the end of "passing band".

A piecewise negative stiffness mechanism and its application in dynamic vibration absorber

A new type of piecewise negative stiffness(NS)mechanism is designed and the relationship between the force and displacement is studied.At first,the prototype of the piecewise NS mechanism is established,and the stiffness characteristic of this mechanism is analyzed.Then,the piecewise NS mechanism is applied to dynamic vibration absorber(DVA)system to establish a dynamic model with the piecewise linearity.The differential motion equations are derived according to Newton's law of mechanics.The approximate analytical solution and the amplitude frequency curve of the system with the piecewise NS are obtained by means of the averaging method.The correctness of the analytical solution is proved by comparing with the numerical solution.In the end,the comparisons with two other traditional DVAs show that the system in this paper has better vibration reduction effect under the condition of harmonic excitation and random excitation.

The characteristic of power flow in broad band dynamic vibration absorber

DVA (dynamic vibration absorber) is good for restrain of the resonance vibration in low frequency, especially under the condition that there are only one mode or two modes in a frequency band. It seems rather difficult to control the resonance vibration of elastic structures in high frequency, since usually there are so many modes in high frequency band. The broad band DVA is brought forward to reduce the resonance vibration of elastic structures. The broad band DVA is designed on the basis of the characteristic of power flow in structure in this paper. The broad band DVA is effective on absorbing the resonance vibration power flow of the most important modes. The ability of absorbing vibration for the broad band DVA is analyzed in detail. The results obtained in this paper provide a basis for the optimization design of the broad band DVA and the optimization positions on structures.

Improved Active Vibration Isolation Systems

The control force, feedback gain, and actuator stroke of several active vibration isolation systems were analyzed based on a single-layer active vibration isolation system. The analysis shows that the feedback gain and actuator stroke cannot be selected independently and the active isolation system design must make a compromise between the feedback gain and actuator stroke. The performance of active isolation systems can be improved by the joint vibration reduction using an active vibration isolation system with an adaptive dynamic vibration absorber. The results show that the joint vibration reduction method can successfully avoid the compromise between the feedback gain and actuator stroke. The control force and the object vibration amplitude are also greatly reduced.

正弦激励下三磁铁磁悬浮动力吸振器的被动减振性能研究

本本文设计了一种新型的三磁铁磁悬浮动力吸振器(TMSDVA),并进行了建模和测试首先建立了TMSDVA悬臂梁减振系统的等效动力学模型.基于等效磁化电流理论,建立了非线性磁悬浮力的计算模型,并分析了非线性磁悬浮力的特征.然后用Runge-Kutta方法求解系统在正弦激励下的动力学响应.通过对仿真结果的分析发现,适当调整TMSDVA的阻尼系数不仅可以降低TMSDVA的减振效果对激励幅值的敏感性,还可以整体提高TMSDVA的减振效果.最后通过实验验证了理论分析的正确性.综合来看,TMSDVA在工程结构的被动减振方面具有潜在应用价值.