Dynamic Viscoelasticity of Polyester/Rubber Composites under Cyclic Loading

This paper focuses on the influence of dynamic viscoelasticity and surface temperature on the fatigue mechanism and fatigue lifetime of polyester/rubber composites. Rubber composites show significant viscoelasticity during fatigue process. The variations of dynamic elastic modulus, mechanical loss angle, loss energy per cycle exhibit different trend in fatigue initial stage and final stage. Due to high viscoelasticity high heat generation occurs under cyclic loading, which leads to a high surface temperature. It is found that the variation of specimen surface temperature depends strongly on cycling frequency and stress amplitude. SEM (scanning electron microscopy) observation and static residual stiffness studies reveal that the surface temperature affects fracture morphology and fatigue lifetime of rubber composites strongly because of heat aging.

DYNAMIC BEHAVIOR ANALYSIS OF VISCOELASTICALLY DAMPED STRUCTURES

Analysis method for the dynamic behavior of viscoelastically damped structures is studied.A finite element model of sandwich beams with eight degrees of freedom is set up and the finite element formulation of the equations of motion is given for the viscoelastically damped structures.An iteration method for solving nonlinear eigenvalue problems is suggested to analyze the dynamic behavior of viscoelastically damped structures. The method has been applied to the complex model analysis of a sandwich cantilever beam with viscoelastic damping material core.

Dynamic Rheological Behavior of Low Water-to-binder Ratio Mortars under Large Amplitude Oscillatory Shear(LAOS)

This work focuses on the dynamic rheological behavior of low water-to-binder ratio cement mortars blended with fly ash microspheres（FAM） or silica fume（SF）. The initial slump flow of each group has been controlled at similar values by adjusting the superplasticizer dosages. With the help of a coaxial cylinder rheometer, the dynamic rheological behaviors of these mortars are investigated by frequency sweeping in the range of 0-2 Hz under large amplitude oscillatory shear（LAOS）. Based on the systematical elaboration of dynamic rheological testing theory, the experimental data are processed according to Lissajous plot fitting to reveal the viscoelastic characteristics. The nonlinearity of response signals is further assessed with Fourier transform（FT） analysis. The parameters, storage modulus G＇, loss modulus G＂ and relative amplitude I3/I1 are proposed to clarify the influences of FAM and SF on the stability and energy consumption of local structures and nonlinearity of response torques. The hydration characteristics of various groups well confirmed the rheological phenomenon. This study is beneficial for the preparation and optimization of flow state concrete such as pumping concrete and self-compacting concrete.

GENERAL DYNAMIC EQUATION AND DYNAMICAL CHARACTERISTICS OF VISCOELASTIC TIMOSHENKO BEAMS

In this paper, a governing differential equation of viscoelastic Timoshenko beam including both extension and shear viscosity is developed in the time domain by direct method. To measure the complex moduli and three parameters of standard linear solid, the forced vibration technique of beam is successfully used for PCL and PMMA specimens. The dynamical characteristics of viscoelastic Timoshenko beams, especially the damping properties, are derived from a considerable number of numerical computations. The analyses show that the viscosity of materials has great influence on dynamical characteristics of structures, especially on damping, and the standard linear solid model is the better one for describing the dynamic behavior of high viscous materials.

Viscoelastic Models for Passive Arterial Wall Dynamics

This paper compares two models predicting elastic and viscoelastic properties of large arteries.Models compared include a Kelvin(standard linear)model and an extended 2-term exponential linear viscoelastic model.Models were validated against in-vitro data from the ovine thoracic descending aorta and the carotid artery.Measurements of blood pressure data were used as an input to predict vessel cross-sectional area.Material properties were predicted by estimating a set of model parameters that minimize the difference between computed and measured values of the cross-sectional area.The model comparison was carried out using generalized analysis of variance type statistical tests.For the thoracic descending aorta,results suggest that the extended 2-term exponential model does not improve the ability to predict the observed cross-sectional area data,while for the carotid artery the extended model does statistically provide an improved fit to the data.This is in agreement with the fact that the aorta displays more complex nonlinear viscoelastic dynamics,while the stiffer carotid artery mainly displays simpler linear viscoelastic dynamics.