Cooperative Relaying in a Three User Downlink NOMA System Using Dynamic Power Allocation

Non-orthogonal multiple access(NOMA)represents the latest addition to the array of multiple access techniques,enabling simultaneous servicing of multiple users within a singular resource block in terms of time,frequency,and code.A typical NOMA configuration comprises a base station along with proximate and distant users.The proximity users experience more favorable channel conditions in contrast to distant users,resulting in a compromised performance for the latter due to the less favorable channel conditions.When cooperative communication is integrated with NOMA,the overall system performance,including spectral efficiency and capacity,is further elevated.This study introduces a cooperative NOMA setup in the downlink,involving three users,and employs dynamic power allocation(DPA).Within this framework,User 2 acts as a relay,functioning under the decode-and-forward protocol,forwarding signals to both User 1 and User 3.This arrangement aims to bolster the performance of the user positioned farthest from the base station,who is adversely affected by weaker channel conditions.Theoretical and simulation outcomes reveal enhancements within the system’s performance.

Designing an Effective Method for Automatic Electric Vehicle Charging Stations in a Static Environment

This article outlines an Effective Method for Automatic Electric Vehicle Charging Stations in a Static Environment. It consists of investigated wireless transformer structures with various ferrite forms. WPT technology has rapidly advanced in the last few years. At kilowatt power levels, the transmission distance grows from a few millimeters to several hundred millimeters with a grid to load efficiency greater than 90%. The improvements have made the WPT more appealing for electric vehicle (EV) charging applications in both static and dynamic charging scenarios. Static and dynamic WEVCS, two of the main applications, are described, and current developments with features from research facilities, academic institutions, and businesses are noted. Additionally, forthcoming concepts based WEVCS are analyzed and examined, including “dynamic” wireless charging systems (WCS). A dynamic wireless power transfer (DWPT) system, which can supply electricity to moving EVs, is one of the feasible alternatives. The moving secondary coil is part of the dynamic WPT system, which also comprises of many fixed groundside (primary) coils. An equivalent circuit between the stationary system and the dynamic WPT system that results from the stationary system is demonstrated by theoretical investigations. The dynamic WPT system’s solenoid coils outperform circular coils in terms of flux distribution and misalignment. The WPT-related EV wireless charging technologies were examined in this study. WPT can assist EVs in overcoming their restrictions on cost, range, and charging time.

Tensile Stiffness Analysis on Ocean Dynamic Power Umbilical

Tensile stiffness of ocean dynamic power umbilical is an important design parameter for functional implementation and structural safety. A column with radial stiffness which is wound by helical steel wires is constructed to predict the tensile stiffness value of umbilicals in the paper. The relationship between the tension and axial deformation is expressed analytically so the radial contraction of the column is achieved in the relationship by use of a simple finite element method. With an agreement between the theoretical prediction and the tension test results, the method is proved to be simple and efficient for the estimation of tensile stiffness of the ocean dynamic power umbilical.

Parallel Dispatch:A New Paradigm of Electrical Power System Dispatch

Modern power systems are evolving into sociotechnical systems with massive complexity, whose real-time operation and dispatch go beyond human capability. Thus,the need for developing and applying new intelligent power system dispatch tools are of great practical significance. In this paper, we introduce the overall business model of power system dispatch, the top level design approach of an intelligent dispatch system, and the parallel intelligent technology with its dispatch applications. We expect that a new dispatch paradigm,namely the parallel dispatch, can be established by incorporating various intelligent technologies, especially the parallel intelligent technology, to enable secure operation of complex power grids,extend system operators' capabilities, suggest optimal dispatch strategies, and to provide decision-making recommendations according to power system operational goals.

An interconnecting bus power optimization method combining interconnect wire spacing with wire ordering

On-chip interconnect buses consume tens of percents of dynamic power in a nanometer scale integrated circuit and they will consume more power with the rapid scaling down of technology size and continuously rising clock frequency, therefore it is meaningful to lower the interconnecting bus power in design. In this paper, a simple yet accurate interconnect parasitic capacitance model is presented first and then, based on this model, a novel interconnecting bus optimization method is proposed. Wire spacing is a process for spacing wires for minimum dynamic power, while wire ordering is a process that searches for wire orders that maximally enhance it. The method, i.e., combining wire spacing with wire ordering, focuses on bus dynamic power optimization with a consideration of bus performance requirements. The optimization method is verified based on various nanometer technology parameters, showing that with 50% slack of routing space, 25.71% and 32.65% of power can be saved on average by the proposed optimization method for a global bus and an intermediate bus, respectively, under a 65-nm technology node, compared with 21.78% and 27.68% of power saved on average by uniform spacing technology. The proposed method is especially suitable for computer-aided design of nanometer scale on-chip buses.

An In-Depth Study of Complex Power System Dynamic Behavior Characteristics for Chinese UHV Power Grid Security

In this paper,a series of major policy decisions used to improve the power grid reliability,reduce the risk and losses of major power outages,and realize the modernization of 21st century power grid are discussed. These decisions were adopted by American government and would also be helpful for the strategic development of Chinese power grid. It is proposed that China should take precaution,carry out security research on the overall dynamic behaviour characteristics of the UHV grid using the complexity theory,and finally provide safeguard for the Chinese UHV grid. It is also pointed out that,due to the lack of matured approaches to controll a cascading failure,the primary duty of a system operator is to work as a "watchdog" for the grid operation security,eliminate the cumulative effect and reduce the risk and losses of major cascading outages with the help of EMS and WAMS.

Most Suitable Power System Stabilizer Selection for the Improvement of Dynamic Stability

A method of enhancing power system stability for a single machine to infinite bus power system is presented. The technique used compromises the effectiveness of Proportional-Integral-Derivative controller （PID）. In order to satisfy the damping characteristics for the proposed power system over a wide range of operating interval, rotational speed, torque angle and terminal voltage signals of the synchronous machine are utilized as control signals of the system. It is well known that these variables have significant effects on damping the generators shaft mechanical oscillations, it＇ll be so easy to validate the most suitable controller as seen from the simulation results.

Energy-Efficient Scheduling Based on Task Migration Policy Using DPM for Homogeneous MPSoCs

Increasing the life span and efficiency of Multiprocessor System on Chip(MPSoC)by reducing power and energy utilization has become a critical chip design challenge for multiprocessor systems.With the advancement of technology,the performance management of central processing unit(CPU)is changing.Power densities and thermal effects are quickly increasing in multi-core embedded technologies due to shrinking of chip size.When energy consumption reaches a threshold that creates a delay in complementary metal oxide semiconductor(CMOS)circuits and reduces the speed by 10%–15%because excessive on-chip temperature shortens the chip’s life cycle.In this paper,we address the scheduling&energy utilization problem by introducing and evaluating an optimal energy-aware earliest deadline first scheduling(EA-EDF)based technique formultiprocessor environments with task migration that enhances the performance and efficiency in multiprocessor systemon-chip while lowering energy and power consumption.The selection of core andmigration of tasks prevents the system from reaching itsmaximumenergy utilization while effectively using the dynamic power management(DPM)policy.Increase in the execution of tasks the temperature and utilization factor(u_(i))on-chip increases that dissipate more power.The proposed approach migrates such tasks to the core that produces less heat and consumes less power by distributing the load on other cores to lower the temperature and optimizes the duration of idle and sleep times across multiple CPUs.The performance of the EA-EDF algorithm was evaluated by an extensive set of experiments,where excellent results were reported when compared to other current techniques,the efficacy of the proposed methodology reduces the power and energy consumption by 4.3%–4.7%on a utilization of 6%,36%&46%at 520&624 MHz operating frequency when particularly in comparison to other energy-aware methods for MPSoCs.Tasks are running and accurately scheduled to make an energy-efficient processor by controlling and managing the thermal effects on-chip and optimizing the energy consumption of MPSoCs.

An Optimal DPM Based Energy-Aware Task Scheduling for Performance Enhancement in Embedded MPSoC

Minimizing the energy consumption to increase the life span and performance of multiprocessor system on chip(MPSoC)has become an integral chip design issue for multiprocessor systems.The performance measurement of computational systems is changing with the advancement in technology.Due to shrinking and smaller chip size power densities onchip are increasing rapidly that increasing chip temperature in multi-core embedded technologies.The operating speed of the device decreases when power consumption reaches a threshold that causes a delay in complementary metal oxide semiconductor(CMOS)circuits because high on-chip temperature adversely affects the life span of the chip.In this paper an energy-aware dynamic power management technique based on energy aware earliest deadline first(EA-EDF)scheduling is proposed for improving the performance and reliability by reducing energy and power consumption in the system on chip(SOC).Dynamic power management(DPM)enables MPSOC to reduce power and energy consumption by adopting a suitable core configuration for task migration.Task migration avoids peak temperature values in the multicore system.High utilization factor(ui)on central processing unit(CPU)core consumes more energy and increases the temperature on-chip.Our technique switches the core bymigrating such task to a core that has less temperature and is in a low power state.The proposed EA-EDF scheduling technique migrates load on different cores to attain stability in temperature among multiple cores of the CPU and optimized the duration of the idle and sleep periods to enable the low-temperature core.The effectiveness of the EA-EDF approach reduces the utilization and energy consumption compared to other existing methods and works.The simulation results show the improvement in performance by optimizing 4.8%on u_(i) 9%,16%,23%and 25%at 520 MHz operating frequency as compared to other energy-aware techniques for MPSoCs when the least number of tasks is in running state and can schedule more tasks to make an energy-efficient processor by controlling and managing the energy consumption of MPSoC.

Steady-state Voltage Security-constrained Optimal Frequency Control for Weak HVDC Sending-end AC Power Systems

Due to the fact that a high share of renewable energy sources(RESs)are connected to high-voltage direct current(HVDC)sending-end AC power systems,the voltage and frequency regulation capabilities of HVDC sending-end AC power systems have diminished.This has resulted in potential system operating problems such as overvoltage and overfrequency,which occur simultaneously when block faults exist in the HVDC link.In this study,a steady-state voltage security-constrained optimal frequency control method for weak HVDC sending-end AC power systems is proposed.The integrated virtual inertia control of RESs is employed for system frequency regulation.Additional dynamic reactive power compensation devices are utilized to control the voltage of all nodes meet voltage security constraints.Then,an optimization model that simultaneously considers the frequency and steady-state voltage security constraints for weak HVDC sending-end AC power systems is established.The optimal control scheme with the minimum total cost of generation tripping and additional dynamic reactive power compensation required is obtained through the optimization solution.Simulations are conducted on a modified IEEE 9-bus test system and practical Qing-Yu line commutated converter based HVDC(LCC-HVDC)sending-end AC power system to verify the effectiveness of the proposed method.

Study on Energy Conversion Characteristics in Volute of Pump as Turbine

A volute is a curved funnel with cross-sectional area increasing towards the discharge port.The volute of a centrifugal pump is the casing hosting the fluid being pumped by the impeller.In Pump-as-turbine devices(PAT),vice versa the volute plays the role of energy conversion element.In the present analysis,this process is analyzed using CFD.The results show that in the contraction section of volute the conversion between dynamic pressure energy and static pressure energy essentially depends on the reduction of flow area,while in the spiral section,frictional losses also play a significant role.From the throat to the end of the volute,the flow decreases in a wave-like manner.

MicroGrid Designer:user-friendly design,operation and control assist tools for resilient microgrid and autonomous community

During this decade,many countries have experienced natural and accidental disasters,such as typhoons,floods,earthquakes,and nuclear plant accidents,causing catastrophic damage to infrastructures.Since the end of 2019,all countries of the world are struggling with the COVID-19 and pursuing countermeasures,including inoculation of vaccine,and changes in our lifestyle and social structures.All these experiences have made the residents in the affected regions keenly aware of the need for new infrastructures that are resilient and autonomous,so that vital lifelines are secured during calamities.A paradigm shift has been taking place toward reorganizing the energy social service management in many countries,including Japan,by effective use of sustainable energy and new supply schemes.However,such new power sources and supply schemes would affect the power grid through intermittency of power output and the deterioration of power quality and service.Therefore,new social infrastructures and novel management systems to supply energy and social service will be required.In this paper,user-friendly design,operation and control assist tools for resilient microgrids and autonomous communities are proposed and applied to the standard microgrid to verify its effectiveness and performance.

Analysis on Pseudo Excitation of Random Vibration for Structure of Time Flight Counter

Traditional computing method is inefficient for getting key dynamical parameters of complicated structure.Pseudo Excitation Method（PEM）is an effective method for calculation of random vibration.Due to complicated and coupling random vibration in rocket or shuttle launching,the new staging white noise mathematical model is deduced according to the practical launch environment.This deduced model is applied for PEM to calculate the specific structure of Time of Flight Counter（ToFC）.The responses of power spectral density and the relevant dynamic characteristic parameters of ToFC are obtained in terms of the flight acceptance test level.Considering stiffness of fixture structure,the random vibration experiments are conducted in three directions to compare with the revised PEM.The experimental results show the structure can bear the random vibration caused by launch without any damage and key dynamical parameters of ToFC are obtained.The revised PEM is similar with random vibration experiment in dynamical parameters and responses are proved by comparative results.The maximum error is within 9%.The reasons of errors are analyzed to improve reliability of calculation.This research provides an effective method for solutions of computing dynamical characteristic parameters of complicated structure in the process of rocket or shuttle launching.

Exploration of Artificial-intelligence Oriented Power System Dynamic Simulators

With the rapid development of artificial intelligence(AI),it is foreseeable that the accuracy and efficiency of dynamic analysis for future power system will be greatly improved by the integration of dynamic simulators and AI.To explore the interaction mechanism of power system dynamic simulations and AI,a general design for AI-oriented power system dynamic simulators is proposed,which consists of a high-performance simulator with neural network supportability and flexible external and internal application programming interfaces(APIs).With the support of APIs,simulation-assisted AI and AIassisted simulation form a comprehensive interaction mechanism between power system dynamic simulations and AI.A prototype of this design is implemented and made public based on a highly efficient electromechanical simulator.Tests of this prototype are carried out in four scenarios including sample generation,AI-based stability prediction,data-driven dynamic component modeling,and AI-aided stability control,which prove the validity,flexibility,and efficiency of the design and implementation for AI-oriented power system dynamic simulators.

A New Clock Gated Flip Flop for Pipelining Architecture

The objective of the work is to design a new clock gated based flip flop for pipelining architecture. In computing and consumer products, the major dynamic power is consumed in the system’s clock signal, typically about 30% to 70% of the total dynamic (switching) power consumption. Several techniques to reduce the dynamic power have been developed, of which clock gating is predominant. In this work, a new methodology is applied for gating the Flip flop by which the power will be reduced. The clock gating is employed to the pipelining stage flip flop which is active only during valid data are arrived. The methodology used in project named Selective Look-Ahead Clock Gating computes the clock enabling signals of each FF one cycle ahead of time, based on the present cycle data of those FFs on which it depends. Similarly to data-driven gating, it is capable of stopping the majority of redundant clock pulses. In this work, the circuit implementation of the various blocks of data driven clock gating is done and the results are observed. The proposed work is used for pipelining stage in microprocessor and DSP architectures. The proposed method is simulated using the quartus for cyclone 3 kit.

Practical Implementation and Operational Experience of Dynamic Mode Decomposition in Wide-area Monitoring Systems of Italian Power System

This study presents the assumptions and strategies for the practical implementation of the dynamic mode decomposition approach in the wide-area monitoring system of the Italian transmission system operator,Terna.The procedure setup aims to detect poorly damped interarea oscillations of power systems.Dynamic mode decomposition is a data-driven technique that has gained increasing attention in different fields;the proposed implementation can both characterize the oscillatory modes and identify the most influenced areas.This study presents the results of its practical implementation and operational experience in power system monitoring.It focuses on the main characteristics and solutions identified to reliably monitor the interarea electromechanical modes of the interconnected European power system.Moreover,conditions to issue an appropriate alarm in case of critical operating conditions are described.The effectiveness of the proposed approach is validated by its application in three case studies:a critical oscillatory event and a short-circuit event that occurred in the Italian power system in the previous years,and a 15-min time interval of normal grid operation recorded in March 2021.

Multi-objective Dynamic Optimal Power Flow of Wind Integrated Power Systems Considering Demand Response

This paper studies the economic environmental energy-saving day-ahead scheduling problem of power systems considering wind generation(WG)and demand response(DR)by means of multi-objective dynamic optimal power flow(MDOPF).Within the model,fuel cost,carbon emission and active power losses are taken as objectives,and an integrated dispatch modeof conventional coal-fired generation,WG and DRis utilized.The corresponding solution process to the MDOPF is based on ahybrid of a non-dominated sorting genetic algorithm-II(NSGA-II)and fuwzy satisfaction-maximizing method,where NSGA-II obtains the Pareto frontier and the fuzzy satisfaction-maximizing method is the chosen strategy.Illustrative cases of different scenarios are performed based on an IEEE 6-units\,30-nodes system,to verify the proposed model and the solution process,as well as the benefits obtained by the DR into power system.

A 12-bit compact column-parallel SAR ADC with dynamic power control technique for high-speed CMOS image sensors

This paper presents a 12-bit column-parallel successive approximation register analog-to-digital con- verter （SAR ADC） for high-speed CMOS image sensors. A segmented binary-weighted switched capacitor digital- to-analog converter （CDAC） and a staggered structure MOM unit capacitor is used to reduce the ADC area and to make its layout fit double pixel pitches. An electrical field shielding layout method is proposed to eliminate the parasitic capacitance on the top plate of the unit capacitor. A dynamic power control technique is proposed to reduce the power consumption of a single channel during readout. An off-chip foreground digital calibration is adopted to compensate for the nonlinearity due to the mismatch of unit capacitors among the CDAC. The prototype SAR ADC is fabricated in a 0.18 μm 1P5M CIS process. A single SAR ADC occupies 20 × 2020μm2. Sampling at 833 kS/s, the measured differential nonlinearity, integral nonlinearity and effective number of bits of SAR ADC with calibration are 0.9/-1 LSB, 1/-1.1 LSB and 11.24 bits, respectively; the power consumption is only 0.26 mW under a 1.8-W supply and decreases linearly as the frame rate decreases.

Scheduling Framework Using Dynamic Optimal Power Flow for Battery Energy Storage Systems

Battery energy storage systems(BESS)are instrumental in the transition to a low carbon electrical network with enhanced flexibility,however,the set objective can be accomplished only through suitable scheduling of their operation.This paper develops a dynamic optimal power flow(DOPF)-based scheduling framework to optimize the day(s)-ahead operation of a grid-scale BESS aiming to mitigate the predicted limits on the renewable energy generation as well as smooth out the network demand to be supplied by conventional generators.In DOPF,all the generating units,including the ones that model the exports and imports of the BESS,across the entire network and the complete time horizon are integrated on to a single network.Subsequently,an AC-OPF is applied to dispatch their power outputs to minimize the total generation cost,while satisfying the power balance equations,and handling the unit and network constraints at each time step coupled with intertemporal constraints associated with the state of charge(SOC).Furthermore,the DOPF developed here entails the frequently applied constant current-constant voltage charging profile,which is represented in the SOC domain.Considering the practical application of a 1 MW BESS on a particular 33 kV network,the scheduling framework is designed to meet the pragmatic requirements of the optimum utilization of the available energy capacity of BESS in each cycle,while completing up to one cycle per day.

Small-signal Angular Stability of Power System as Affected by Grid-connected Variable Speed Wind Generators—A Survey of Recent Representative Works

This paper reviews the status and progress of the investigation on power system small-signal angular stability as affected by grid-connected variable speed wind generators(VSWGs).The review is carried out on the basis of a survey of recently published representative papers.Strategies of the investigation made in those selected papers are classified into two groups:1)VSWGs displacing synchronous generators(SGs);2)VSWGs simply being added in a power system.The diversification of the results of the investigation is highlighted in the survey.Careful analysis on two strategies of the investigation is conducted in this paper.It is revealed that in the strategy of VSWGs displacing SGs,there are two factors which could affect power system small-signal angular stability differently:1)Withdrawing the SGs’dynamics;2)adding the VSWGs’dynamics.In the strategy of adding VSWGs in the power system,there are also two affecting factors:1)Change of load flow brought about by the VSWGs;2)dynamic interactions with the SGs introduced by the VSWGs.Hence diversified results of the investigation obtained so far are not only due to the dependence of the investigation on sample power systems used,but also caused by the mixture of different affecting factors.This paper is concluded with a summary of key issues of the investigation for future work.