Numerical analysis for the free-boundary current reversal equilibrium in the AC plasma current operation in a tokamak

In recent decades, tokamak discharges with zero total toroidal current have been reported in tokamak experiments, and this is one of the key problems in alternating current(AC) operations.An efficient free-boundary equilibrium code is developed to investigate such advanced tokamak discharges with current reversal equilibrium configuration. The calculation results show that the reversal current equilibrium can maintain finite pressure and also has considerable effects on the position of the X-point and the magnetic separatrix shape, and hence also on the position of the strike point on the divertor plates, which is extremely useful for magnetic design, MHD stability analysis, and experimental data analysis etc. for the AC plasma current operation on tokamaks.

Factors Influencing Large-scale Operation of Large Grain Farmers in Northeast China

With the grain yield accounting for 20% of the whole country, the north- east China is a strategic region for ensuring national grain security and also a most centralized region of large grain farmers. Through a sampling survey of large grain farmers in 15 counties and cities of northeast China, with the aid of SPSS and AMOS software, using multiple regression analysis and structural equation modeling, this paper made a quantitative analysis on the influence of the subjective and ob- jective factors of large grain farmers on their large-scale management. The results showed that the age structure, educational level, family operating capital, yield ex- pectation and protective farming awareness of large grain farmers are the positive factors influencing their large scale operation due to agricultural subsidy policy. By comparison, the number of agricultural machinery and equipment owned by family, regional labor force, expectation for future income, and expectation for contractual scale become negative factors influencing large-scale operation of large grain farm- ers because of agricultural policies. When the future expectation, self conditions, family endowment, and operation conditions of large grain farmers increase one unit, their large scale operation motivation will increase by 0.692, 0.689, 0.487 and 0.363 units respectively. Thus, increasing the future expectation and self conditions of large grain farmers is a key factor for promoting large scale operation of farmland.

Effects of spot size on the operation mode of Ga As photoconductive semiconductor switch employing extrinsic photoconductivity

To guide the illuminating design to improve the on-state performances of gallium arsenide(GaAs)photoconductive semiconductor switch(PCSS),the effect of spot size on the operation mode of GaAsPCSS based on a semi-insulating wafer with a thickness of 1 mm,triggered by a 1064-nm extrinsic laser beam with the rectangular spot,has been investigated experimentally.It is found that the variation of the spot size in length and width can act on the different parts of the output waveform integrating the characteristics of the linear and nonlinear modes,and then significantly boosts the PCSS toward different operation modes.On this basis,a two-channel model containing the active and passive parts is introduced to interpret the relevant influencing mechanisms.Results indicate that the increased spot length can peak the amplitude of static domains in the active part to enhance the development of the nonlinear switching,while the extended spot width can change the distribution of photogenerated carriers on both parts to facilitate the linear switching and weaken the nonlinear switching,which have been proved by comparing the domain evolutions under different spot sizes.

Design and operation strategies of the system for destroying time-sensitive target based on system effectiveness

To improve the effect of destroying time-sensitive target （TST）, a method of operational effectiveness evaluation is presented and some influential factors are analyzed based on the combat flow of system for destroying TST. Considering the possible operation modes of the system, a waved operation mode and a continuous operation mode are put forward at first. At the same time, some relative formulas are modified. In examples, the influential factors and operation modes are analyzed based on the system effectiveness. From simulation results, some design and operation strategies of the system for destroying time sensitive targets are concluded, which benefit to the improvement of the system effectiveness.

Three-dimensional virtual operations can facilitate complicated surgical planning for the treatment of patients with jaw deformities associated with facial asymmetry: a case report

This article describes a case we experienced in which good postsurgical facial profiles were obtained for a patient with jaw deformities associated with facial asymmetry,by implementing surgical planning with SimPlant OMS.Using this method,we conducted LF1 osteotomy,intraoral vertical ramus osteotomy（IVRO）,sagittal split ramus osteotomy（SSRO）,mandibular constriction and mandibular border genioplasty.Not only did we obtain a class I occlusal relationship,but the complicated surgery also improved the asymmetry of the frontal view,as well as of the profile view,of the patient.The virtual operation using three-dimensional computed tomography（3D-CT）could be especially useful for the treatment of patients with jaw deformities associated with facial asymmetry.

Ripple-effect analysis for operational architecture of air defense systems with supernetwork modeling

In order to solve the problem that the ripple-effect analy- sis for the operational architecture of air defense systems （OAADS） is hardly described in quantity with previous modeling approaches, a supernetwork modeling approach for the OAADS is put for- ward by extending granular computing. Based on that operational units and links are equal to different information granularities, the supernetwork framework of the OAADS is constructed as a “four- network within two-layer” structure by forming dynamic operating coalitions, and measuring indexes of the ripple-effect analysis for the OAADS are given combining with Laplace spectral radius. In this framework, via analyzing multidimensional attributes which inherit relations between operational units in different granular scales, an extended granular computing is put forward integrating with a topological structure. Then the operation process within the supernetwork framework, including transformation relations be- tween two layers in the vertical view and mapping relations among functional networks in the horizontal view, is studied in quantity. As the application case shows, comparing with previous modeling approaches, the supernetwork model can validate and analyze the operation mechanism in the air defense architecture, and the ripple-effect analysis can be used to confirm the key operational unit with micro and macro viewpoints.

Supercapacitor electrode based on few-layer h-BNNSs/rGO composite for wide-temperature-range operation with robust stable cycling performance

Currently,developing supercapacitors with robust cycle stability and suitability for wide-temperature-range operations is still a huge challenge.In the present work,few-layer hexagonal boron nitride nanosheets(h-BNNSs)with a thickness of 2−4 atomic layers were fabricated via vacuum freeze-drying and nitridation.Then,the h-BNNSs/reduced graphene oxide(rGO)composite were further prepared using a hydrothermal method.Due to the combination of two two-dimensional(2D)van der Waals-bonded materials,the as-prepared h-BNNSs/rGO electrode exhibited robustness to wide-temperature-range operations from−10 to 50℃.When the electrodes worked in a neutral aqueous electrolyte(1 M Na2SO4),they showed a great stable cycling performance with almost 107%reservation of the initial capacitance at 0℃ and 111% at 50℃ for 5000 charge−discharge cycles.

Novel Doppler Frequency Extraction Method Based on Time-Frequency Analysis and Morphological Operation

A novel method of Doppler frequency extraction is proposed for Doppler radar scoring systems. The idea is that the time-frequency map can show how the Doppler frequency varies along the time-line, so the Doppler frequency extraction becomes curve detection in the image-view. A set of morphological operations are used to implement curve detection. And a map fusion scheme is presented to eliminate the influence of strong direct current （DC） component of echo signal during curve detection. The radar real-life data are used to illustrate the performance of the new approach. Experimental results show that the proposed method can overcome the shortcomings of piecewise-processing-based FFT method and can improve the measuring precision of miss distance.

Stable single-mode operation of 894.6 nm VCSEL at high temperatures for Cs atomic sensing

In this paper, stable single-mode operation at high temperatures is produced by the surface-relief-integrated vertical cavity surface emitting laser（VCSEL）. The gain-cavity mode detuning technique is employed to realize high operating temperatures for the VCSEL. The surface relief is etched in the centre of the top side as a mode discriminator for the fundamental mode output, and the threshold current minimum is 1.94 mA at high temperatures by the gain-cavity mode detuning technique. Maximum single-fundamental-mode output power of 0.45 mW at 80℃ is obtained, and the side mode suppression ratios（SMSRs） are more than 30 dB with increasing temperature and current, respectively.

The Clinical Application of Computerized Three-Dimensional Mimic Operation for Maxillofacial Bone Tumor

Facial bone, as the frame to support maxillofacial region and with several sinuses and cavities, is structurally complicated and the maxillofacial tumors,benign or malignant, in this region usually grows into the deep tissues, sinus-cav-ities and orbit and destroys the bone. In this study, the maxillofacial tumors were subjected to a mimic operation on a computer following CT scanning and 3-dimen-sional reconstruction. The data similar to those of real operation were obtained,which could be used for developing operative plans. As compared with data on the basis of conditions in the real operation, computerized mimic operation reflected the real conditions during operation. Computerized mimic operation is valuable for the preoperative planning and the prediction of probable intraoperative events.

Ta-Doped Sb2Te Allows Ultrafast Phase-Change Memory with Excellent High-Temperature Operation Characteristics

Phase-change memory(PCM)has considerable promise for new applications based on von Neumann and emerging neuromorphic computing systems.However,a key challenge in harnessing the advantages of PCM devices is achieving high-speed operation of these devices at elevated temperatures,which is critical for the efficient processing and reliable storage of data at full capacity.Herein,we report a novel PCM device based on Ta-doped antimony telluride(Sb2Te),which exhibits both high-speed characteristics and excellent high-temperature characteristics,with an operation speed of 2 ns,endurance of >106 cycles,and reversible switching at 140℃.The high coordination number of Ta and the strong bonds between Ta and Sb/Te atoms contribute to the robustness of the amorphous structure,which improves the thermal stability.Furthermore,the small grains in the three-dimensional limit lead to an increased energy efficiency and a reduced risk of layer segregation,reducing the power consumption and improving the long-term endurance.Our findings for this new Ta-Sb2Te material system can facilitate the development of PCMs with improved performance and novel applications.

A review of state-of-the-art processing operations in coal preparation

Coal preparation is an integral part of the coal commodity supply chain. This stage of post-mining, pre-utilization beneficiation uses low-cost separation technologies to remove unwanted mineral matter and moisture which hinder the value of the coal product. Coal preparation plants typically employ several parallel circuits of cleaning and dewatering operations, with each circuit designed to optimally treat a specific size range of coal. Recent innovations in coal preparation have increased the efficiency and capac- ity of individual unit operations while reinforcing the standard parallel cleaning approach. This article, which describes the historical influences and state-of-the-art design for the various coal preparation unit operations, is organized to distinguish between coarse/intermediate coal cleaning and fine/ultrafine coal cleaning. Size reduction, screening, classification, cleaning, dewatering, waste disposal unit operations are particularly highlighted, with a special focus on the LI.S. design philosophy. Notable differences between the U.S. and international operations are described as appropriate.

Modified frontolateral partial laryngectomy operation: combined muscle-pedicle hyoid bone and thyrohyoid membrane flap in laryngeal reconstruction

Objective: Laryngeal reconstruction is needed to preserve laryngeal function in patients who have undergone extensive vertical or frontal partial laryngectomy. However, the procedure remains a difficult challenge. Several reconstruction techniques have been described, but these techniques pose risks of complications such as laryngeal stenosis. This study aimed to evaluate the postoperative course and functional outcomes of a new technique that combined a muscle-pedicle hyoid bone and a thyrohyoid flap during laryngeal reconstruction after tumor resection. Methods: Four patients underwent extensive vertical partial or frontal partial laryngectomy for cancer. After tumor resection, laryngeal reconstruction was performed using the proposed technique. Postoperative recovery time, complications, and oncologic results were evaluated. Results: The four patients were successfully treated with the proposed technique. No dyspnea, dysphagia, or death occurred during the postoperative course. Decannulation was performed after a median of 3 days. The average postoperative hospital stay was 7 days. Short-term postoperative functional recovery was normal. No laryngeal stenosis or tumor recurrence was observed in any of the four patients after a follow-up period of more than 24 months. Conclusion: The combination of the muscle-pedicle hyoid bone and the thyrohyoid flap is a reliable procedure for laryngeal reconstruction after extensive vertical partial or frontal partial laryngectomy.

A Three-Stage Operational Amplifier for a Wide Range of Capacitive Loads

This paper presents a three-stage CMOS operational amplifier （opamp） that combines accuracy with stability for a wide range of capacitive loads. A so-called quenching capacitor is added to a multipath nested Miller compensation （MNMC） topology to obtain stability for a wide range of capacitive loads. Theoretical analysis and mathematical formulas are provided to prove the improvement in stability. A prototype of this frequency compen- sation scheme is implemented in a 0.7μm CMOS process. Measurement′s show that the amplifier can drive capaci- tive loads ranging from 100pF to 100/μF with a gain of 90dB and a minimum phase margin of 26°. The amplifier has a unity-gain bandwidth of 1MHz for a 100pF capacitive load. It employs a quenching capacitance of 18pF.

An Analysis of Operational Efficiency of Agricultural Insurance Agency:Based on Three-Stage DEA Model

From the perspective of agricultural insurance agency,this paper focuses on the study of operational efficiency of agricultural insurance agency,and analyzes the operational efficiency of agricultural insurance agency and its influencing factors,in order to improve the operational efficiency of agricultural insurance agency,better supply agricultural insurance and achieve the policy effect of agricultural insurance.The results of this paper are as follows:( i) Either comprehensive operational efficiency or scale efficiency of Chinese-funded agency is higher than that of foreign-funded agency,but its pure technical efficiency is lower than that of foreign-funded agency,indicating that the managerial decision ability of Chinese-funded agency is weaker than that of foreign-funded agency,and needs to be improved;( ii) The operational efficiency of professional agricultural insurance agency is higher than that of comprehensive agricultural insurance agency,and the agricultural insurance agency is greatly affected by environmental factors;( iii) The operating time of agricultural insurance agency is proportional to its operational efficiency;( iv) The quality of employees is positively correlated with the capital and cost input difference,but negatively correlated with the difference in the number of employees. Therefore,it is necessary to pay attention to the improvement of employees' working efficiency while laying emphasis on employees' quality.

Large-Scale Distributed Photovoltaic Power Dispatching and Operation Management Review

Distributed photovoltaic power (PV) is the main development model of distributed generation. It is necessary to research on dispatching and operation management with large-scale distributed PV connected. This paper analyzes development status, technical requirement and dispatching and operation management situation of distributed PV in Germany and China. Then introduce the preparation of distributed PV dispatching and operation management criterion. Through summarizing the experiences and lessons of large-scale distributed PV development in Germany, it gives advice to the development of distributed PV dispatching and operation management in China.

A Novel Close-loop Strategy for Integrating Process Operations of Fluidized Catalytic Cracking Unit with Production Planning Optimization

Production planning models generated by common modeling systems do not involve constraints for process operations, and a solution optimized by these models is called a quasi-optimal plan. The quasi-optimal plan cannot be executed in practice some time for no corresponding operating conditions. In order to determine a practi- cally feasible optimal plan and corresponding operating conditions of fluidized catalytic cracking unit （FCCU）, a novel close-loop integrated strategy, including determination of a quasi-optimal plan, search of operating conditions of FCCU and revision of the production planning model, was proposed in this article. In the strategy, a generalized genetic algorithm （GA） coupled with a sequential process simulator of FCCU was applied to search operating conditions implementing the quasi-optimal plan of FCCU and output the optimal individual in the GA search as a final genetic individual. When no corresponding operating conditions were found, the final genetic individual based correction （FGIC） method was presented to revise the production planning model, and then a new quasi-optimal production plan was determined. The above steps were repeated until a practically feasible optimal plan and corresponding operating conditions of FCCU were obtained. The close-loop integrated strategy was validated by two cases, and it was indicated that the strategy was efficient in determining a practically executed optimal plan and corresponding operating conditions of FCCU.

A DERIVATIVE-HILBERT OPERATOR ACTING FROM LOGARITHMIC BLOCH SPACES TO BERGMAN SPACES

Letμbe a positive Borel measure on the interval[0,1).The Hankel matrix■with entriesμn,k=μn+k,whereμn=■[0,1)tndμ(t),induces,formally,the operator■where■is an analytic function in.We characterize the measuresμfor which■is bounded(resp.,compact)operator from the logarithmic Bloch space■into the Bergman space■,where 0≤α<∞,0<p<∞.We also characterize the measuresμfor which■is bounded(resp.,compact)operator from the logarithmic Bloch space■into the classical Bloch space■.

Influence of cyclic ignition and steady-state operation on a 1–2 A barium tungsten hollow cathode

Booming low-power electric propulsion systems require 1–2 A hollow cathodes.Such cathodes are expected to go through more frequent ignitions in the low orbit,but the impact of cyclic ignitions on such 1–2 A barium tungsten hollow cathodes with a heater was not clear.In this study,a 12,638-cyclic ignition test and a 6,000-hour-long life test on two identical cathodes were carried out.The discharge voltage of the cathode and the erosion of the orifice after cyclic ignition were all larger than that of the cathode after stable operation.This indicated that the impact of cycle ignition on the discharge performance of a low current BaO-W cathode with a heater was higher than that of stable operation.The results of the ion energy distribution function measured during the ignition period indicated that the main reason for the orifice expansion was ion bombardment.Therefore,it was necessary to pay attention to the number of ignitions for the lifetime of this kind of cathode.

JR East aims for driverless Shinkansen operation

East Japan Railway Company(JR East)is aiming to“realize driverless train operation”as one of the key measures to respond to rapid changes in the business environment.Currently,Automatic Train Operation(ATO)equipment is not installed on the Shinkansen,but there are plans to introduce ATO or driverless operation in the near future.From 2018-2021,the Ministry of Land,Infrastructure,Transport and Tourism(MLIT)held the“ATO Technology Study Group for Railways”in which the concept of technical requirements necessary for driverless operation was discussed.In 2021,JR East conducted the GOA4 demonstration test on the Joetsu Shinkansen.In this test,we were able to confirm the basic functions of Shinkansen vehicles such as automatic departure control,speed control,fixed position stop control,and remote stop control using ATO.We aim to realize unattended operation(GOA4)for deadhead trains between Niigata Station and the Niigata Shinkansen Rolling Stock Center by the end of the 2020 s,and driverless operation(GOA3)for passenger trains of the Joetsu Shinkansen by the mid-2030s and continue to develop the necessary technologies and build systems.