Rare earth permanent magnets Sm_2(Co, Fe, Cu, Zr)_17 for high temperature applications

Sintered Sm（Coba1FexCu0.1Zr0.03）7.5 （x=0.09-0.21） permanent magnets with higher Fe content were found to have higher remanence Br and maximum energy product （BH）max at room temperature. Br and （BH）max reached maximum of 0.96 T and 176.7 kJ/m^3, respectively at room temperature when the Fe content x reached 0.21. However, the intrinsic coercivity Hci at room temperature increased gradually when the Fe content x increased from 0.09 to 0.15, but when x further increased to 0.21, Hcidecreased. Hci attained its peak value of 2276.6 kA/m with Fe content x=0.15 at room temperature. For magnets with x=0.15, Br, （BH）max and Hc1 reached 0.67 T, 81.2 kJ/m^3 and 509.4 kA/m at 500 ℃, respectively, showing good high temperature stability, which could be used in high temperature applications.

Research and Develop ment of Rare Earth Per manent Magnets in China

The research and development of RE magnets in China were briefly reviewed. The research achievements of RE magnets reach international level. The intermetallic nitrides with ThMn12-type structure of RFe series which possess Chinese proprietary were prepared. The output of RE magnets has ranked second in the world. The production of RE magnets will be steadily expanding with the expiration of NdFeB patent in 2003. Some related data were also presented.

Study on Laser Drilling in Rare Earth Magnets

A Nd/YAG pulse laser is used to drill Sm Co and Nd Fe B permanent magnetic rotor The experimental studies and analysis on the morphology and the phase composition of the drilled rotor are described In the centre of the drilled rotor, there is a hole whose diameter is roughly equal to the girdle size of the Gauss laser beam The hole wall is composed of rapidly fused amorphous matter, whose morphology and composition are obviously different from that before hole drilling The grain in heat affected zone has been fined, but the composition has not changed The experimental results show that the reasonable selection of laser parameters according to physical properties of the materials is necessary in order to improve product quality and production efficiency They also show that the lower laser power, the narrower pulse and the mulitiple drilling are advantageous to the processing for hard brittle materials like rare earth magnets

Development of Strip Casting Technology in Rare Earth Permanent Magnet Alloys and Hydrogen Storage Alloys in China

The SC technique is now being applied widely in material preparation, especially in rare earth functional materials in virtue of its advanced process and high performance product. The applications of SC technique in rare earth permanent magnet alloys and hydrogen storage alloys were analyzed integrative, on the basis of summary of SC technique development in this paper. The paper mainly includes development history of SC technology, effect of SC technology on alloy microstructure, application of SC technology in RE storage hydrogen alloy and sintered Nd-Fe-B alloy, development of SC equipment and SC product industry. At the same time, the paper points out the existing problem of SC products.

An Empirical Study of CAPM’s Applicability to Rare Earth Permanent Magnet Material Stocks

China has the world’s largest reserves of rare earth elements.Rare earth permanent magnet material has always been one of the popular industries in the investment market.CAPM is the basic asset-pricing model in financial economics.There are a number of studies conducted to examine the applicability of CAPM to stock markets in different industries and to investigate the modification method to improve the model’s prediction accuracy.In this study,seven leading enterprises in China’s rare earth permanent magnet material industry listed on the A-share market were selected as the research subjects.Based on CAPM,regression analysis was conducted on the monthly data from March 2016 to February 2022.The results demonstrated that using the β coefficient to explain the risk of China’s rare earth permanent magnet industry is ineffective.The ultimate benefit was less affected by market indexes but mainly by non-systematic risks.CAPM has low applicability to China’s rare earth permanent magnet material industry and requires further improvement.Nevertheless,CAPM still has some guiding significance in making enterprise comparisons and investment decisions.

Dependence of Gravity Induced Absorption Changes on the Earth’s Magnetic Field as Measured during Parabolic Flight Campaigns

Various spectroscopic experiments performed on the AIRBUS ZERO G—located in Bordeaux, France—in the years 2002 to 2012 exhibit minute optical reflection/absorption changes (GIACs) as a result of gravitational changes between 0 and 1.8 g in various biological species such as maize, oats, Arabidopsis and particularly Phycomyces sporangiophores. During a flight day, the AIRBUS ZERO G conducts 31 parabolas, each of which lasts about three minutes including a period of 22 s of weightlessness. So far, we participated in 11 parabolic flight campaigns including more than 1000 parabolas performing various kinds of experiments. During our campaigns, we observed an unexplainable variability of the measuring signals (GIACs). Using GPS-positioning systems and three dimensional magnetic field sensors, these finally were traced back to the changing earth’s magnetic field associated with the various flight directions. This is the first time that the interaction of gravity and the Earth’ magnetic field in the primary induction process in living system has been observed.

Design and analysis of the Macao Science Satellite-1's laser retro-reflector array

The origin and spatial-temporal variation of the Earth’s magnetic field(EMF)is one of the important scientific problems that has long been unsolved.The Macao Science Satellite-1(MSS-1)under construction is China’s first high-precision EMF measurement satellite.To satisfy the highly precise requirements of the MSS-1 orbit measurement,a light,high-precision,four-prism laser retroreflector array was designed.It weighs approximately 285 g,its effective reflection area is greater than 1.77 cm^(2),and its size is 100×100×41 mm.The laser retro-reflector array has excellent performance,and it can achieve a ranging precision at the subcentimeter level for satellite laser ranging.It will be developed and installed on the MSS-1 as a power-free load for high-precision orbit measurement and accurate orbit calibration.The MSS-1 is planned to be brought into the International Laser Ranging Service observations.More than 31satellite laser ranging stations in the International Laser Ranging Service around the world will be able to measure the MSS-1 with long arcs,which will support the scientific mission of high-precision EMF exploration.

Numerical simulation of the sensor output on Macao Science Satellite-1

Macao Science Satellite-1(MSS-1)will be launched at the early of 2023 into a near-circular orbit.The mission is designed to measure the Earth’s geomagnetic field with unpreceded accuracy through a new perspective.The most important component installed on the satellite,to ensure high accuracy,is the deployable boom(Optical Bench).A Vector Field Magnetometer(VFM),an Advanced Stellar Compass(ASC),and a Couple Dark State Magnetometers(CDSM)are deployed on the deployable boom.In order to maximize the mission’s scientific output,a numerical simulator on MSS-1’s deployable boom was required to evaluate the adaptability of all devices on the deployable boom and assist the satellite’s data pre-processing.This paper first briefly describes the synthesis of the Earth’s total magnetic field and then describes the method simulating the output of scalar and vector magnetometers.Finally,the calibration method is applied to the synthetic magnetometer data to analyze the possible noise/error of the relevant instruments.Our results show that the simulator can imitate the disturbance of different noise sources or errors in the measuring system,and is especially useful for the satellite’s data processing group.

Effect of Fe Substitution on Magnetic Properties and Radar Wave Absorption of the Y_(2)Co_(17) Rare Earth Soft Magnetic Alloy

The rapid development of information technology leads a demand for high frequency soft magnetic materials with ex-ceptional radar wave absorption properties.A new magnetic material with superior radar wave absorption is explored in this paper.we explored the preparation of Y_(2)Co_(17)-xFex(x=0.0,1.0,2.0,3.0)alloy powders using yttrium oxide as a raw material by a low-cost and short preparation cycle reduction-diffusion process.The crystal structure,intrinsic magnetic properties,high frequency magnetism and radar wave absorption of Y_(2)Co_(17)-xFex(x=0.0,1.0,2.0,3.0)were investigated.These compounds have a perfect magnetic repair of Y_(2)Co_(17) and enable the improvement of the overall magnetic properties of Y_(2)Co_(17)-xFex(x=0.0,1.0,2.0,3.0)compounds.The Y_(2)Co_(17)-xFex/Polyurethane(PU)(x=0.0,1.0,2.0,3.0)absorbers were divided in detail using the zero-reflection mechanism.The results show that all Y_(2)Co_(17)-xFex/PU(x=0.0,1.0,2.0,3.0)absorbers have excellent absorption performance(reflection loss RL is less than-85 dB);in addition,Y_(2)Co_(15)Fe_(2)/PU absorbers and Y_(2)Co_(14)Fe_(3)/PU absorbers are superior candidates for S-band materials.In particular,the perfectly matched frequency fp of the modulated Y_(2)Co_(14)Fe_(3)/PU absorber is shifted to the L-band(1–2 GHz)where early warning radars are located.The Y_(2)Co_(14)Fe_(3)/PU absorber has an effective absorption bandwidth of 300 MHz(1.5–1.8 GHz)at a thickness of 5.230 mm.It can also absorb the full L-band at-4 dB,which has rarely been reported.

Influence of the substitution of Sm, Gd, and Dy for La in La_(0.7)Sr_(0.3)MnO_3 on its magnetic and electric properties and strengthening effect on room-temperature CMR

A series of La0.7-xSmxSr0.3MnO3, La0.7-xGdxSr0.3MnO3, and La0.7-xDyxSr0.3MnO3 （x=0.00, 0.10, 0.20, 0.30） samples were prepared by the solid-state reaction method. The influence of the substitution of Sm, Gd, and Dy for La on the magnetic and electric properties and on the magnetoresistance （MR） was studied through measurements of M-T curves and p-T curves. The results showed that： lattice distortion induced by substitution of Sm, Gd, and Dy for La and extra magnetism of substitution had great influence on the magnetic and electric properties of pcrovskite manganites; substitution of magnetic rare earth element for La was an effective way to change Curie temperature and to strengthen MR in perovskite manganites; and appropriate substitution proportion would generate large MR near room temperature.

Application of high-temperature permanent magnets Sm(Co, Fe, Cu, Zr)_Z in PPM focusing system

Rare earth permanent magnets Sm（Co, Fe, Cu, Zr）z with outstanding performance and high-temperature thermal stability were fabricated. Optimized by Fe content and process, Sm（Co0.72Fe0.15Cu0.1Zr0.03）7.5 magnet with B1〉0.75 T and Hci〉1300 kA/m at 300 ℃ can be obtained. According to the performance data of Sm（Co0.72Fe0.15Cu0.1Zr0.03）7.5, the magnetic field along central axis Bz in periodic permanent magnet （PPM） focusing system was simulated using electromagnetic field analysis software Maxwell 2D/3D. The Bz exhibited typical cosine curve along central axis, and the peak value of Bz was high enough to meet the demand of PPM focusing system at room temperature even at 200±20 ℃. Additionally, a kind of simple cooling structure for PPM focusing system was designed by setting cooling pipe between polepieces. Simulated results showed that smooth cosine curve of Bz was successfully achieved with good control of the thickness of cooling pipe.

EFFECT OF Nb ADDITION ON MICROSTRUCTURE OF(Nd,Dy)-(Fe,Co)-B MAGNETS

An addition of Nb up to 2 at.-% into(Nd,Dy)-(Fe,Co)-B alloy causes the formation of dendrite Fe_2Nb and the precipitates in hard magnetic grains.Both increases with increasing Nb content.During sintering,part of Fe_2Nb dissolves within the 2:14:1 grains, and the Fe_2Nb along grain boundaries hinders the growth of 2:14:1 grains.During an- nealing,the dissolved Nb in(?)-phase precipitates out,and this nearby the grain boundary diffuses into Nd-rich phase to form new granular Fe_2Nb and to increase the Nb content in Nd-rich phase,this results in a precipitate-free zone in the(?)-grain near Nd-rich phase.

Preparation of Sm_2Fe_(17)Alloys in Ca-Sm_2O_3-Fe System

Thermodynamics and kinetics for the preparation of Sm2Fe17 alloys by reduction-diffusion （R-D） method in CaSm2O3-Fe System were investigated. With increasing reaction temperature, it is found that the reaction rate of R-D and the amount of Sm in the Sm2Fe17 alloy increase, and the increased amount at lower temperature is higher than that at higher temperature. Moreover, results from contracting core modal show that the peritectic reaction between Sm and Fe is a ratedetermined step in the whole R-D process. The apparent activation energy and the pre-exponential factor for this reaction are 73.74 kJ· mol^ -1 and 7.79 × 10^- 3 respectively.

Microstructure and magnetic properties of Fe-Co-Nd-Y-B alloys obtained by suction casting method

The phase composition, magnetic properties i.e. coercivity and the magnetic polarization at room temperature for the bulk Fe67Co5Nd3Y6B19 and Fe64Co5Nd6Y6B19 alloys were studied. The bulk amorphous Fe67CosNd3Y6B19 alloy, inhomogeneous in the as-quenched state, crystallized after annealing at 948 K for 0.5 h and consisted of Nd2Fe14B-type, Fe2B and paramagnetic phases. The rapidly solidified Fe64Co5Nd6Y6B19 alloy contained the Nd2Fel4B-type and paramagnetic phases. The annealing of the bulk Fe67CosNd3Y6B19 alloy at 948 K for 0.5 h led to hard magnetic properties. However, the bulk Fe64Co5Nd6Y6B19 alloy exhibited good hard magnetic properties directly after preparation.

Effect of annealing process on magnetic properties of Sm(Co_(0.6)Fe_(0.27)Cu_(0.1)Zr_(0.03))_(7.5) ribbons

Sm（Co0.6Fe0.27Cu0.1Zr0.03）7.5 ribbons were prepared by melt-spun method.The results showed that the remnant magnetization Mr and intrinsic coercivity Hci had a rapid increase when the heating rate increased from 5 to 10 °C/min.But the increase of Mr and Hci were observed to be very little when the heating rate was further increased to 20 °C/min.10 °C/min was the critical heating rate for obtaining high magnetic properties.The maximum values of Mr and Hci reached 0.70 T and 780.1 kA/m when the annealing temperature and annealing time were optimized to be 800 °C and 1 h, respectively.Proper second-step heat treatment could suppress the decrease of Hci when the cooling rate increased from 0.7 to 5 °C/min, which could reduce the cooling time effectively.

Recovery of Cassiterite and Topaz Minerals from an Old Metallurgical Dump, Eastern Desert of Egypt

Huge amounts of tailing dumps as a result of mines’ blasting operations were impacting economic and environmental problems. Evaluation of one of these tailing dumps of the Eastern Desert of Egypt showed the presence of reasonable amount of cassiterite mineral reaching 0.199% SnO2. The mineral cassiterite was found as finely disseminated particulates, reached to 5 microns, within varieties of quartz-feldspar-hornblende-biotite granitic formations. In the present study, the processing regime considered from the beginning the alignment between reaching cassiterite mineral liberation size, and its extreme brittleness character. Stirring ball milling technique was applied to produce −0.51 mm product with minimum fines as possible, which was left aside for a separate study. The ground product −0.51 + 0.074 mm was subjected to joint shaking table/dry high intensity magnetic separation techniques after splitting it into two fractions, −0.51 + 0.21 mm and −0.21 + 0.074 mm. Each fraction was separately subjected to “Wilfley” shaking table. At optimum conditions, a shaking table concentrate was obtained with 0.29% SnO2 and an operational recovery reached 96.94% from a feeding contained 0.19% SnO2. The heavies and the two middling products after shaking table were directed separately after dryness to dry high intensity magnetic separation using “Eriez” rare earth roll separator, meanwhile the light fractions were rejected. Mathematically designed experiments were applied to optimize the separation process. At optimum conditions, a final cassiterite concentrate was obtained with 11.25% SnO2, and an operational recovery 94.08%. In addition, a topaz mineral concentrate was separated at splitter angle 65˚.

An Axion Interpretation of the ANITA Events

We suggest that the unusual events observed by the ANITA experiment originate from axion particles traversing the Earth. Under the influence of the geomagnetic field, the axion may oscillate into a photon and vice-versa. To amplify the axion transition into photon, we consider that the phenomenon takes place at resonance, where the effective photon mass is equal to the axion mass. This requirement fixes the axion mass at 44 eV. An axion at this mass scale reproduces the cold dark matter scenario. If our interpretation prevails, with the help of axions we can establish an axion tomography of the Earth.

Iron recovery and rare earths enrichment from Bayan Obo tailings using Coal-Ca(OH)2-NaOH roasting followed by magnetic separation

The recovery of iron and enrichment of rare earths from Bayan Obo railings were investigated using Coal Ca（OH） 2 NaOH roasting followed by magnetic separation. The influences of roasting temperature, roasting time, coal content, milling time, Ca（OH）2 dosage and NaOH dosage on the iron and rare earths recovery were explored. The results showed that the magnetic concentrate containing 70.01 wt. % Fe with the iron recovery of 94.34G and the tailings of magnetic separation containing 11.46 wt. % rare earth oxides （REO） with the REO recovery of 98. 19% were obtained under the optimum conditions （i. e. , roasting temperature of 650℃, roasting time of 60 min, coal content of 2.0%, milling time of 5 min, and NaOH dosage of 2.0%）. The Ca（OH）2 dosage had no effect on the separation of iron and rare earths. According to the mineralogical and morphologic analysis, the iron and rare earths of Bayan Obo tailings could be utilized in subsequent ironmaking process and hydrometallurgy process.

Microstructure and Magnetic Property Variation with Addition of Rare Earth Element Dy in Co-Ni-Al Ferromagnetic Shape Memory Alloy

The influence of rare earth element Dy on martensitic transformation and magnetic properties of Co-Ni-Al alloy was studied.The results showed that the microstructure of the sample has a dual-phase structure（γ-phase and martensite）.The rare earth element Dy was segregated in Co-richγ-phase and took the place of Co after its addition into the Co-Ni-Al alloy.As Dy content increased to over 0.5at.%,the grain was refined and the rare earth intermetallic compounds Co5 Dy were precipitated inγ-phase.Meanwhile,one-step thermo-elastic martensitic transformation occurred in the sample,wherein the phase transformation temperature significantly increased with rising Dy content.The martensite had a tetragonal L10 structure with a（111）twinning plane.Furthermore,the sample exhibited obvious hysteresis behaviors in the magnetic hysteresis loops.In addition,the saturation magnetization,coercivity,retentivity and magnetocrystalline anisotropy were significantly enhanced owing to the bigger radius of Dy which took the place of Co in the alloy.