Neotectonics of the Eastern Margin of the Tibetan Plateau: New Geological Evidence for the Change from Early Pleistocene Transpression to Late Pleistocene-Holocene Strike-slip Faulting

We present in this paper some new evidence for the change during the Quaternary in kinematics of faults cutting the eastern margin of the Tibetan Plateau. It shows that significant shortening deformation occurred during the Early Pleistocene, evidenced by eastward thrusting of Mesozoic carbonates on the Pliocene lacustrine deposits along the Minjiang upstream fault zone and by development of the transpressional ridges of basement rocks along the Anninghe river valley. The Middle Pleistocene seems to be a relaxant stage with local development of the intra-mountain basins particularly prominent along the Minjiang Upstream and along the southern segment of the Anninghe River Valley. This relaxation may have been duo to a local collapse of the thickened crust attained during the late Neogene to early Pleistocene across this marginal zone. Fault kinematics has been changed since the late Pleistocene, and was predominated by reverse sinistral strike-slip along the Minshan Uplift, reverse dextral strike-slip on the Longmenshan fault zone and pure sinistral strike-slip on the Anninghe fault. This change in fault kinematics during the Quaternary allows a better understanding of the mechanism by which the marginal ranges of the plateau has been built through episodic activities.

Crustal Motion Characteristics in the Eastern Margin of the Tibetan Plateau and Adjacent Regions after the Wenchuan Earthquake

The Wenchuan earthquake has altered the crustal motion characteristics in the eastern margin of the Tibetan Plateau and adjacent regions.Using discontinuous GPS survey data for 2008–2012, the velocity field for the Eurasia reference framework has been obtained, and the general trend of contemporary crustal motion after the occurrence of the Wenchuan earthquake has been studied.In addition, using the velocity field, the block movement velocity has been estimated by least-squares fitting.Furthermore, the properties and displacement rates of main faults have been obtained from the differences in velocity vectors of the blocks on both sides of the faults.The results reveal that there are no obvious changes in the general characteristics of crustal motion in this area after the Wenchuan earthquake.The earthquake mainly changed the rate of the movement of the Chuan-Qing block and caused variation in the movement direction of the South China block.The effect of the earthquake on faults is mainly reflected in variations in fault displacement velocity; there is no fundamental change in the properties of fault activity.The displacement rates of the Xianshuihe fault decreased by 3–4 mm/a, the Longmenshan fault increased by 9–10 mm/a, and the northern segment of the Anninghe fault increased by approximately 9 mm/a.Furthermore, the displacement rates of the Minjiang, Xueshan, Huya, Longquanshan, and Xinjin faults increased by 2–3 mm/a.This implies that the effects of the Wenchuan earthquake on crustal movement can mainly be observed in the Chuan-Qing, South China, and N-Chuan-Dian blocks and their internal faults, as well as the Xianshuihe and Longmenshan faults and the northern section of the Anninghe fault.The reason for this is that the Wenchuan earthquake disturbed the kinematic and dynamic balance in the region.

Crustal flow beneath the eastern margin of the Tibetan plateau

In large continental orogens, an important research topic is the behavior of deep crustal and upper mantle deformation, and the flow styles of ductile material. The morphology of the eastern margin of the Tibetan plateau, adjacent to the Sichuan basin, is characterized by very steep relief with high mountain ranges. The crust beneath this region slows the velocities in the middle and lower crust. We have adopted a relatively dense network to inverse the detailed structure of the crust and upper mantle along the eastern margin of the Tibetan plateau and Sichuan basin, using teleseismic data via receiver function analysis. The results are in-line with the hypothesis that viscous crustal material is flowing beneath the eastern margin of the Tibetan plateau and that this process drives overlying crustal material around the strong and rigid Sichuan basin. When the viscous material hits this obstruction, flows are divided into two or more branches with different directions. The upper part of the upwelling viscous flow produces the pressure to intrude the upper crust, thereby driving uplift of mountain ranges and high peaks. In contrast, the lower part of the downwelling viscous flow produces the pressure to intrude the lower crust and upper mantle to deepen the Moho discontinuity, causing observed crustal thickening.

Crustal Uplift in the Longmen Shan Mountains Revealed by Isostatic Gravity Anomalies along the Eastern Margin of the Tibetan Plateau

This study examines the relationship between high positive isostatic gravity anomalies （IGA）, steep topography and lower crustal extrusion at the eastern margin of the Tibetan Plateau. IGA data has revealed uplift and extrusion of lower crustal flow in the Longmen Shan Mountains （the LMS）. Firstly, The high positive IGA zone corresponds to the LMS orogenic belt. It is shown that abrupt changes in IGA correspond to zones of abrupt change of topography, crustal thickness and rock density along the LMS. Secondly, on the basis of the Airy isostasy theory, simulations and inversions of the positive IGA were conducted using three-dimensional bodies. The results indicated that the LMS lacks a mountain root, and that the top surface of the lower crust has been elevated by 11 km, leading to positive IGA, tectonic load and density load. Thirdly, according to Watts＇s flexural isostasy model, elastic deflection occurs, suggesting that the limited （i.e. narrow） tectonic and density load driven by lower crustal flow in the LMS have led to asymmetric flexural subsidence in the foreland basin and lifting of the forebulge. Finally, based on the correspondence between zones of extremely high positive IGA and the presence of the Precambrian Pengguan-Baoxing complexes in the LMS, the first appearance of erosion gravels from the complexes in the Dayi Conglomerate layer of the Chengdu Basin suggest that positive IGA and lower crustal flow in the LMS took place at 3.6 Ma or slightly earlier.

Magnetostratigraphy of a Loess-Paleosol Sequence from Higher Terrace of the Daduhe River in the Eastern Margin of the Tibetan Plateau and Its Geological Significance

The eolian deposits distributed in the river valleys in the eastern margin of the Tibetan Plateau （TP） are very useful in neotectonic and paleoclimatic studies. Firstly, the climate in the eastern margin of the TP is mainly controlled by the Indian summer monsoon, and detailed studies on the loess-paleosol sequences in this region can provide valuable terrestrial evidence of past changes in the Indian summer monsoon. Secondly, the river terraces in the eastern margin of the TP are considered to be a sensitive recorder of neotectonism to reflect the timing and amplitude of the TP uplift.

Application of the Material Balance Method in Paleoelevation Recovery: A Case Study of the Longmen Mountains Foreland Basin on the Eastern Margin of the Tibetan Plateau

We applied the material balance principle of the denudation volume and sedimentary flux to study the denudation-accumulation system between the Longmen Mountains （Mts.） and the foreland basin. The amount of sediment in each sedimentation stage of the basin was estimated to obtain the denudation volume, erosion thickness and deposit thickness since the Late Triassic Epoch, to enable us to recover the paleoelevation of the provenance and the sedimentary area. The results show the following： （1） Since the Late Triassic Epoch, the elevation of the surface of the Longmen Mts. has uplifted from 0 m to 2751 m, and the crust of the Longmen Mts. has uplifted by 9.8 km. Approximately 72% of the materials introduced have been denuded from the mountains. （2） It is difficult to recover the paleoelevation of each stage of the Longmen Mts. foreland basin quantitatively by the present-day techniques and data. （3） The formation of the Longmen Mts. foreland basin consisted of three stages of thrust belt tectonic load and three stages of thrust belt erosional unload. During tectonic loading stages （Late Triassic Epoch, Late Jurassic-Early Cretaceous, Late Cretaceous-Miocene）, the average elevation of Longmen Mts. was lower （approximately 700-1700 m）. During erosional unloading stages （Early and Middle Jurassic, Middle Cretaceous and Jiaguan, Late Cenozoic）, the average elevation of Longmen Mts. was high at approximately 2000-2800m.

Investigation of plateau basin crustal structures and thickening mechanisms in the northeastern margin of the Tibetan plateau

This paper uses deep seismic sounding （DSS） data to contrast and analyze the crustal structures of three plateau basins （Songpan-Garze, Qaidam, Longzhong） in the northeastern margin of the Qinghai-Xizang （Tibetan） plateau, as well as two stable cratonic basins （Ordos, Sichuan） in its peripheral areas. Plateau basin crustal structures, lithological variations and crustal thickening mechanisms were investigated. The results show that, compared to the peripheral stable cratonic basins, the crystalline crusts of plateau basins in the northeastern margin are up to 10 15 km thicker, and the relative medium velocity difference is about 5% less. The medium velocity change in crustal layers of plateau basin indicates that the upper crust undergoes brittle deformation, whereas the lower crust deforms plastically with low velocity. The middle crust shows a brittle-to-plastic transition zone in this region. Thickening in the lower crust （about 5 10 km）, and rheological characteristics that show low- medium velocity （relatively reduced by 7%）, suggest that crustal thickening mainly takes place in lower crust in the northeastern margin of the Tibetan plateau. The crust along the northeastern margin shows evidence of wholesale block movement, and crustal shortening and thickening seem to be the main deformation features of this region. The GPS data show that the block motion modes and crustal thickening in the Tibetan plateau is closely related to the peripheral tectonic stress field and motion direction of the Indian plate. The Mani-Yushu- Xianshuihe fold belt along the boundary between the Qiangtang block and the Bayan Har block divides the different plateau thickening tectonic environments into the middle-western plateau, the northeastern margin and the southeastern plateau.

New Discovery of Holocene Activity along the Weixi-Qiaohou Fault in Southeastern Margin of the Tibetan Plateau and its Neotectonic Significance

Objective The lateral extrusion eastward of the Tibetan Plateau leads to the formation of the Sichuan–Yunnan block, which is the most representative active block in the southeastern margin of the Tibetan Plateau, characterized by strong and frequent seismicity(Li Ping et al., 1975; Zhang Peizhen et al., 2003; Li Yong et al., 2017). Its eastern boundary is composed of sinistral faults including the Xianshuihe, Xiaojiang faults, etc., and the western

New insights of the Cenozoic Rotational Deformation of Crustal Blocks on the Southeastern Margin of the Tibetan Plateau and its Tectonic Implications

Objective The lateral extrusion of southeastern edge of the crustal materials around the Tibetan Plateau since the Oligocene is believed to be one of the main inducements of-1300 km latitudinal crustal convergence in the Tibetan Plateau, since the collision of India and Eurasia in the Paleogene. Two end-member models were used to describe the process of lateral extrusion of crustal material on the southeastern edge of the Tibetan Plateau. The ＂tectonic escape＂ model suggests the Indochina Block, Chuandian Fragment and Shan-Thai Block have experienced lateral extrusion along strike-slip fault systems, and the ＂crustal flow＂ model suggests that the upper crust has undergone southeastward escape in the form of ductile deformation, driven by viscous lower crustal flow channels. In addition, the GPS observations surrounding the Tibetan Plateau indicate that crustal materials currently experience clockwise rotation around the Eastern Himalaya syntaxis. This work conducted paleomagnetic studies in the Cretaceous and Paleogene red-beds along the southeastern margin of Tibetan Plateau,

Dextral-Slip Thrust Faulting and Seismic Events of the Ms 8.0 Wenchuan Earthquake,Longmenshan Mountains,Eastern Margin of the Tibetan Plateau

Dextral-slip thrust movement of the Songpan-Garze terrain over the Sichuan block caused the Ms 8.0 Wenchuan earthquake of May 12, 2008 and offset the Central Longmenshan Fault （CLF） along a distance of -250 km. Displacement along the CLF changes from Yingxiu to Qingchuan. The total oblique slip of up to 7.6 m in Yingxiu near the epicenter of the earthquake, decreases northeastward to 5.3 m, 6.6 m, 4.4 m, 2.5 m and 1.1 m in Hongkou, Beichuan, Pingtong, Nanba and Qingchuan, respectively. This offset apparently occurred during a sequence of four reported seismic events, EQ1-EQ4, which were identified by seismic inversion of the source mechanism. These events occurred in rapid succession as the fault break propagated northeastward during the earthquake. Variations in the plunge of slickensides along the CLF appear to match these events. The Mw 7.5 EQ1 event occurred during the first 0-10 s along the Yingxiu-Hongkou section of the CLF and is characterized by 1.7 m vertical slip and vertical slickensides. The Mw 8.0 EQ2 event, which occurred during the next 10-42 s along the Yingxiu-Yanziyan section of the CLF, is marked by major dextralslip with minor thrust and slickensides plunging 25°-35° southwestward. The Mw 7.5 EQ3 event occurred during the following 42-60 s and resulted in dextral-slip and slickensides plunging 10° southwestward in Beichuan and plunging 73° southwestward in Hongkou. The Mw 7.7 EQ4 event, which occurred during the final 60-95 s along the Beichuan-Qingchuan section of the CLF, is characterized by nearly equal values of dextral and vertical slips with slickensides plunging 45°-50° southwestward. These seismic events match and evidently controlled the concentrations of landslide dams caused by the Wenchuan earthquake in Longmenshan Mountains.

Present-day Block Movement and Fault Activity on the Eastern Margin of the Tibetan Plateau

The geology and tectonics in the eastern margin of Tibetan Plateau are complex. The main tectonic framework is composed of blocks and faults. Using discontinuous global positioning system survey data for 2008–2014, the velocity field for the Eurasia reference framework was obtained. Based on the velocity field, the present-day velocities of the blocks and boundary faults were estimated. The results reveal that the movement rates of the Chuan-Qing, South China, Chuan-Dian and Indo-China blocks are（17.02±0.60） mm/a,（8.77±1.51） mm/a,（13.85±1.31） mm/a and（6.84 ± 0.74） mm/a, respectively, and their movement directions are 99.5°, 120.3°, 142.9° and 153.3°, respectively. All blocks exhibit clockwise rotation. The displacement rates of the Xianshuihe, Longmenshan, Anninghe, Zemuhe, Xiaojiang and Red River faults are（7.30±1.25–8.30±1.26） mm/a,（10.07±0.97–11.79±0.89） mm/a,（0.96±0.74–2.98±1.73） mm/a,（2.03±0.49–3.20±0.73） mm/a,（3.45±0.40–6.02±0.50） mm/a and（6.23±0.56） mm/a, respectively. The Xianshuihe, Anninghe, Zemuhe and Xiaojiang faults show leftlateral strike-slip movement, while the Longmenshan and Red River faults show right-lateral strikeslip. These characteristics of the blocks and faults are related to the particular tectonic location and dynamic mechanism.

3D v_P and v_S models of southeastern margin of the Tibetan plateau from joint inversion of body-wave arrival times and surface-wave dispersion data

A new 3D velocity model of the crust and upper mantle in the southeastern （SE） margin of the Tibetan plateau was obtained by joint inversion of body- and sur- face-wave data. For the body-wave data, we used 7190 events recorded by 102 stations in the SE margin of the Tibetan plateau. The surface-wave data consist of Rayleigh wave phase velocity dispersion curves obtained from ambient noise cross-correlation analysis recorded by a dense array in the SE margin of the Tibetan plateau. The joint inversion clearly improves the Vs model because it is constrained by both data types. The results show that at around 10 km depth there are two low-velocity anomalies embedded within three high-velocity bodies along the Longmenshan fault system. These high-velocity bodies correspond well with the Precambrian massifs, and the two located to the northeast of 2013 Ms 7.0 Lushan earthquake are associated with high fault slip areas during the 2008 Wenchuan earthquake. The aftershock gap between 2013 Lushan earthquake and 2008 Wenchuan earthquake is associated with low-velocity anomalies, which also acts as a barrier zone for ruptures of two earthquakes. Generally large earthquakes （M 〉 5） in the region occurring from 2008 to 2015 are located around the high-velocity zones, indicating that they may act as asperities for these large earthquakes. Joint inversion results also clearly show that there exist low-velocity or weak zones in the mid-lower crust, which are not evenly distributed beneath the SE margin of Tibetan plateau.

Three dimensional velocity model and its tectonic implications at China Seismic Experimental Site,eastern margin of the Tibetan Plateau

The China Seismic Experimental Site(CSES)is located at the intersection of the Tibetan Plateau,South China Block,and Indian Plate and has complex geological settings and intense crustal deformation,making it one of the most seismically active areas in Chinese mainland.A high-resolution,three-dimensional(3D)crust-mantle velocity structure is crucial for understanding seismotectonic environments,lithospheric deformation mechanisms,and deep dynamic processes.We first constructed a high-vertical-resolution 3D initial velocity model using the joint inversion of receiver functions and surface waves and then obtained a 3D P-and S-wave velocity model(CSES-VM1.0)with the highest lateral resolution of 0.25°for the CSES using double-difference tomography.Owing to the limitations of the Sn observation data,the resolution of the S-wave velocity model in the lower crust and upper mantle was reduced,making it closer to the initial model provided by joint inversion.A comparison with explosive-source seismic data showed that the synthetic P-wave first-arrival travel times of the new model were closer to the observations than those of the previous velocity models.The velocity cross-sections across the source areas of the 2022 Lushan MS6.1 and Ludian MS6.8 earthquakes reveal that the former earthquake occurred near a weak contact zone between the Tibetan Plateau and Sichuan Basin,and the rupture of the latter earthquake occurred in a granitic area,with the northern end blocked by rigid high-velocity bodies.A clear high-velocity anomaly zone is distributed along the western margin of the Yangtze Block,revealing the spatial distribution of Neoproterozoic intermediate-basic intrusions.This high-velocity zone significantly controls the morphology of fault zones and influences the rupture processes of major earthquakes.Two northeast-southwest and north-south trending high-velocity anomalies were found near Panzhihua,potentially related to Neoproterozoic and Middle-Late Permian intermediate-basic intrusions.The imaging results revealed the spatial distribution of the Lincang granitoid batholith,the uplifted zone of the central axis fault in the Simao Basin,and the Ailaoshan complex belt in the southwestern CSES,demonstrating a higher spatial resolution compared to previous results.Our velocity model provides an essential foundation for deep structural studies,high-precision earthquake locations,and strong ground motion simulations in the CSES.

Deep tectonics and seismogenic mechanisms of the seismic source zone of the Jishishan M_(s)6.2 earthquake on December 18,2023,at the northeast margin of the Tibetan Plateau

On December 18,2023,an M_(s)6.2 earthquake occurred in Jishishan,Gansu Province,China.This earthquake happened in the eastern region of the Qilian Orogenic Belt,which is situated at the forefront of the NE margin of the Tibetan Plateau(i.e.,Qinghai-Tibet Plateau),encompassing a rhombic-shaped area that intersects the Qilian-Qaidam Basin,Alxa Block,Ordos Block,and South China Block.In this study,we analyzed the deep tectonic pattern of the Jishishan earthquake by incorporating data on the crustal thickness,velocity structure,global navigation satellite system(GNSS)strain field,and anisotropy.We discovered that the location of the earthquake was related to changes in the crustal structure.The results showed that the Jishishan M_(s)6.2 earthquake occurred in a unique position,with rapid changes in the crustal thickness,Vp/Vs,phase velocity,and S-wave velocity.The epicenter of the earthquake was situated at the transition zone between high and low velocities and was in proximity to a low-velocity region.Additionally,the source area is flanked by two high-velocity anomalies from the east and west.The principal compressive strain orientation near the Lajishan Fault is primarily in the NNE and NE directions,which align with the principal compressive stress direction in this region.In some areas of the Lajishan Fault,the principal compressive strain orientations show the NNW direction,consistent with the direction of the upper crustal fast-wave polarization from local earthquakes and the phase velocity azimuthal anisotropy.These features underscore the relationship between the occurrence of the Jishishan M_(s)6.2 earthquake and the deep inhomogeneous structure and deep tectonic characteristics.The NE margin of the Tibetan Plateau was thickened by crustal extension in the process of northeastward expansion,and the middle and lower crustal materials underwent structural deformation and may have been filled with salt-containing fluids during the extension process.The presence of this weak layer makes it easier for strong earthquakes to occur through the release of overlying rigid crustal stresses.However,it is unlikely that an earthquake of comparable or larger magnitude would occur in the short term(e.g.,in one year)at the Jishishan east margin fault.

Mechanism of Diabatic Heating on Precipitation and the Track of a Tibetan Plateau Vortex over the Eastern Slope of the Tibetan Plateau

Existing studies contend that latent heating(LH)will replace sensible heating(SH)to become the dominant factor affecting the development of the Tibetan Plateau vortex(TPV)after it moves off the Tibetan Plateau(TP).However,in the process of the TPV moving off the TP requires that the airmass traverse the eastern slope of the Tibetan Plateau(ESTP)where the topography and diabatic heating(DH)conditions rapidly change.How LH gradually replaces SH to become the dominant factor in the development of the TPV over the ESTP is still not very clear.In this paper,an analysis of a typical case of a TPV with a long life history over the ESTP is performed by using multi-sourced meteorological data and model simulations.The results show that SH from the TP surface can change the TPV-associated precipitation distribution by temperature advection after the TPV moves off the TP.The LH can then directly promote the development of the TPV and has a certain guiding effect on the track of the TPV.The SH can control the active area of LH by changing the falling area of the TPV-associated precipitation,so it still plays a key role in the development and tracking of the TPV even though it has moved out of the main body of the TP.

Numerical simulation of tectonic stress and strain rate fields in the northeastern margin of the Tibetan Plateau in association with major fault zones

A series of large strike-slip and thrust faults have developed in the northeastern margin of the Tibetan Plateau since the Late Cenozoic,with strong and active tectonic activity and frequent occurrences of large earthquakes.Modulation of regional tectonic stress distribution,strain fields,and seismic hazards has not been well studied.This study introduces a three-dimensional viscoelastic finite element numerical model to calculate crustal stress and strain rate fields under current tectonic loading.The preliminary results show that the direction of the horizontal principal compressive stress rate and compressive horizontal principal strain rate in the northeastern margin of the Tibetan Plateau rotate clockwise as a whole,and this rotation is more significant in the southeast direction because of the block of the Alxa and the Ordos blocks.The NE-SW horizontal principal compressive stress rate and SE horizontal tensile stress rate dominate the entire study region.The maximum value of the horizontal principal compressive strain rate at a depth of 0 km in the model is approximately 4×10^(-8)yr^(-1)near the East Kunlun fault and is smaller in the stable Alxa and Ordos blocks at approximately 1×10^(-8)yr^(-1).The calculated regional stress state is in good agreement with the actual focal mechanism solution,indicating that strike-slip and thrust stress fields dominate the northeastern margin of the Tibetan Plateau.The Altyn Tagh,East Kunlun,and Haiyuan faults demonstrate that the maximum shear strain rate gradually decreases eastward,and the decrease in the maximum shear strain rate value is absorbed by orogenic uplift and crustal shortening at its boundaries.The western section of the Altyn Tagh fault,west-to-middle sections of the East Kunlun fault,and west-to-middle sections of the Haiyuan fault will have high seismic hazards in the future.

April-September minimum temperature reconstruction based on Sabina tibetica ring-width chronology in the central eastern Tibetan Plateau,China

Minimum temperatures have remarkable impacts on tree growth at high-elevation sites on the Tibetan Plateau,but the shortage of long-term and high-resolution paleoclimate records inhibits understanding of recent minimum temperature anomalies.In this study,a warm season(April–September)reconstruction is presented for the past 467 years(1550–2016)based on Sabina tibetica ring-width chronology on the Lianbaoyeze Mountain of the central eastern Tibetan Plateau.Eight warm periods and eight cold periods were identified.Long-term minimum temperature variations revealed a high degree of coherence with nearby reconstructions.Spatial correlations between our reconstruction and global sea surface temperatures suggest that warm season minimum temperature anomalies in the central eastern Tibetan Plateau were strongly influenced by large-scale ocean atmospheric circulations,such as the El Ni?o-Southern Oscillation and the Atlantic Multidecadal Oscillation.

Multi-Stage Basin Development and Hydrocarbon Accumulations： A Review of the Sichuan Basin at Eastern Margin of the Tibetan Plateau

Sichuan Basin is one of the uppermost petroliferous basins in China. It experienced three evolutionary phases which were marine carbonate platform （Ediacaran to Late Triassic）, Indosinian-Yanshanian orogeny foreland basin （Late Triassic to Late Cretaceous） and uplift and tectonic modification （Late Cretaceous to Quaternary）. The present-day tectonics of the Sichuan Ba- sin and its periphery are characterized by three basic elements which are topography, basement type and surface structure, and two settings （plate margin and interior）. Therefore, be subdivided into five units which have different structure and tectonic history. The basin contains five different sets of source rocks with thickness up to 2 500 m. These source rocks were well preserved due to the presence of Middel-Lower Triassic evaporites （〉-200 m） and thick terrestrial sediments filling in the Indosinian-Yanshanian foreland basin （〉3 000 m）. The uplift and erosion since Late Cretaceous has significant influence on cross-strata migration and accumulation of oil and gas. The multi-phase evolution of the basin and its superimposed tectonic elements, good petroleum geologic conditions and diverse petroleum systems reveal its bright exploration prospects.

Influence of mantle convection to the crustal movement pattern in the northeastern margin of the Tibetan Plateau based on numerical simulation

Based on the recent observations about the movement and rheological structure of the lithosphere and deformation pattern of the crust, we developed a three-dimensional finite element model for the northeastern margin of the Tibetan Plateau.The model considered the impacts of both external and internal conditions, including mantle convection, gravitational potential energy and block interactions. We compared the simulated surface movement rates to the observed GPS velocities, and the results revealed that crustal movement gradually decreased toward the edge of the plateau. The factors controlling this pattern are the interactions of adjacent blocks, gravitational potential energy of the plateau, and also mantle convection as well. Additionally,according to the observation that there was an apparent difference between the horizontal movement rate of the lithosphere and convective velocity of the underlying mantle, and also based on the results of seismic anisotropy studies that suggest different strengths and deformation regimes of the lithosphere in different tectonic blocks, we proposed that the impact of mantle convection on the lithosphere may have varied in space, and introduced a parameter named mantle convection intensity factor in numerical simulations. Our simulation results show consistent surface movement rates with GPS observations, which further supports the viewpoint of seismic anisotropy studies, i.e., the degree of coupling between the crust and mantle varies significantly among different blocks.

Crustal structure of northeastern margin of the Tibetan Plateau by receiver function inversion

Using seismic data of about one year recorded by 18 broadband stations of ASCENT project, we obtained 2547 receiver func- tions in the northeastern Tibetan Plateau. The Moho depths under 14 stations were calculated by applying the H-x domain search algorithm. The Moho depths under the stations with lower signal-noise ratio （SNR） were estimated by the time delay of the PS conversion. Results show that the Moho depth varies in a range of -40--60 kin. The Moho near the Haiyuan fault is vague, and its depth is larger than those on its two sides. In the Qinling-Qilian Block, the Moho becomes shallower gradually from west to east. To the east of 105~E, the average depth of the Moho is 45 km, whereas the west is 50 km or even deeper. Combining our results with surface wave research, we suggest a boundary between the Qinling and the Qilian Mountains at around 105~E. S wave velocities beneath 15 stations have been obtained through a linear inversion by using Crust2.0 as an ini- tial model, and the crustal thickness that was derived by H-x domain search algorithm was also taken into account. The results are very similar to the results of previous active source studies. The resulting figure indicates that low velocity layers devel- oped in the middle and lower crust beneath the transition zone of the Tibet Block and western Qinling, which may be related to regional faults and deep earth dynamics. The velocity of the middle and lower crust increases from the Songpan Block to the northeastern margin of Tibetan Plateau. Based on the velocity of the crust, the distribution of the low velocity zone and the composition of the curst （Poisson＇s ratio）, we infer that the crust thickening results from the crust shortening along the direc- tion of compression.