Numerical and Experimental Analysis of A Vertical-Axis Eccentric-disc Variable-Pitch Turbine(VEVT)

A combined experimental and numerical investigation is carried out to study the performance of a vertical-axis eccentric-disc variable-pitch turbine(VEVT).A scheme of eccentric disc pitch control mechanism based on doubleblock mechanism is proposed.The eccentric control mechanism and the deflection angle control mechanism in the pitch control structure are designed and optimized according to the functional requirements of the turbine,and the three-dimensional model of the turbine is established.Kinematics analysis of the eccentric disc pitch control mechanism is carried out.Kinematics parameters and kinematics equations which can characterize its motion characteristics are derived.Kinematics analysis and simulation are carried out,and the motion law of the corresponding mechanical system is obtained.By analyzing the force and motion of blade of VEVT,the expressions of the important parameters such as deflection angle,attack angle and energy utilization coefficient are obtained.The lateral induced velocity coefficient is acquired by momentum theorem,the hydrodynamic parameters such as energy utilization coefficient are derived,and the hydrodynamic characteristics of VEVT are also obtained.The experimental results show that the turbine has good energy capture capability at different inflow velocities of different sizes and directions,which verifies that VEVT has good self-startup performance and high energy capture efficiency.

Cold Model Study on Mg Desulfurization of Hot Metal Under Mechanical Stirring

The new method of in-situ desulfurization with mechanical stirring of new type impellers was introduced, in which the bubble＇s dispersion and disintegration of magnesium vapor were the key to boosting the desulfurization efficiency and increasing the utilization rate of magnesium. Effects of different new type of impellers on bubble dis persion and disintegration were studied through bubble image analysis, gas-liquid mass transfer, and power con- sumption levels of different impeller structures. The results showed that the sloped swept-back blade impeller-2 pro- duces optimal bubble＇s dispersion and disintegration, as well as higher volumetric mass transfer coefficient and CO2 gas utilization while consuming the least power. Numerical simulation result with Fluent software also showed that the sloped swept-back blade impeller-2 has higher turbulent kinetic energy and better velocity distribution than the other two impellers.

Improvement of Impeller Blade Structure for Gas Injection Refining under Mechanical Sirring

Abstract： The impeller blade structure for gas injection refining under mechanical stirring has been explored by water model experiments. A sloped swept-back blade impeller is＇proposed for the purpose. The central part of the impeller is disk- or plate-shaped, and the blades are fitted to the side of the disk or plate. In addition, a disk is put on the top side of the impeller blades. The impeller can strengthen the radial and downward flow between the blades and weaken the swirl flow in the zone above the impeller. These effects on flow phenomena are favorable for disintegration and wide dispersion of bubbles which are injected from a nozzle attached to the center of the underside of the impeller. In addition, the sloped swept-back impeller requires less power consumption. The impeller shaft should be placed away from the vessel center so as to disperse the injected bubbles widely in the bath under mechanical stirring even with unidi- rectional impeller rotation and without installing baffles. The number of gas holes in the nozzle and the direction of gas injection have a little effect on the bubble disintegration and dispersion in the bath. Highly efficient gas injection refining can be established under the conditions of proper impeller size, larger nozzle immersion depth, larger eccen- tricity and rotation speed of the impeller. The sloped swept back blade impeller can decrease the power consumption and vet improve the bubble disintegration and wide dist^ersion in the bath.