Seismic responses and resilience of novel SMA-based self-centring eccentrically braced frames under near-fault ground motions

In this paper,the seismic responses and resilience of a novel K-type superelastic shape memory alloy(SMA)self-centring(SC)eccentrically braced frame(EBF)are investigated.The simulation models of the SMA-based SC-EBF and a corresponding equal-stiffness traditional EBF counterpart are first established based on some existing tests.Then twenty-four near-fault ground motions are used to examine the seismic responses of both EBFs under design basis earthquake(DBE)and maximum considered earthquake(MCE)levels.Structural fragility and loss analyses are subsequently conducted through incremental dynamic analyses(IDA),and the resilience of the two EBFs are eventually estimated.The resilience assessment basically follows the framework proposed by Federal Emergency and Management Agency(FEMA)with the additional consideration of the maximum residual inter-storey drift ratio(MRIDR).The novel SMA-based SC-EBF shows a much better resilience in the study and represents a promising attractive alternative for future applications.

Numerical study of the cyclic load behavior of AISI 316L stainless steel shear links for seismic fuse device

This paper presents the results of nonlinear finite element analyses conducted on stainless steel shear links. Stainless steels are attractive materials for seismic fuse device especially for corrosion-aware environment such as coastal regions because they are highly corrosion resistant, have good ductility and toughness properties in combination with low maintenance requirements. This paper discusses the promising use ofAISI 316L stainless steel for shear links as seismic fuse devices. Hysteresis behaviors of four stainless steel shear link specimens under reversed cyclic loading were examined to assess their ultimate strength, plastic rotation and failure modes. The nonlinear finite element analysis results show that shear links made of AISI 316L stainless steel exhibit a high level of ductility. However, it is also found that because of large over-strength ratio associated with its strain hardening process, mixed shear and flexural failure modes were observed in stainless steel shear links compared with conventional steel shear links with the same length ratio. This raises the issue that proper design requirements such as length ratio, element compactness and stiffener spacing need to be determined to ensure the full development of the overall plastic rotation of the stainless steel shear links.

A new design of automatic vertical drilling tool

In order to effectively improve penetration rates and enhance wellbore quality for vertical wells,a new Automatic Vertical Drilling Tool(AVDT)based on Eccentric Braced Structure(EBS)is designed.Applying operating principle of rotary steering drilling,AVDT adds offset gravity block automatic induction inclination mechanism.When hole straightening happens,tools take essentric moment to be produced by gravity of offset gravity lock to control the bearing of guide force,so that well straightening is achieved.The normal tool's size of the AVDT is designed as 215.9 mm,other major components'sizes are worked out by the result of theoretical analysis,including the offset angle of EBS.This paper aims to introduce the structure,operating principle,theoretical analysis and describe the key components'parameters setting of the AVDT.