Developing Ecological Agricultural Engineering to Promote Rural Revitalization in China

Ecological agricultural engineering is a necessary innovation and expansion of China’s agricultural engineering science and technology that aims to meet the overall, the whole chain and the coordinated development needs of the whole system for rural revitalization. Focusing on ecological agricultural engineering, this paper introduces its development and early practice and technology, and also discusses its development direction, development path, and important role in boosting rural revitalization. The development of ecological agricultural engineering will play an important role in China’s agricultural production practice, agricultural engineering discipline construction and agricultural and rural modernization.

Riverine Ecology Restoration through Ecological Engineering and Naturalization

[Objective] The aim was to improve and restore destroyed riverine and water ecosystem and to prevent bio-diversity from deteriorating in Jari demonstration plot in Ethiopia. [Method] Biological engineering and naturalization were made use of to protect nature and restore wetland as per Succession Theory. [Result] Both of eco- environment and eco-functions of Mille River were restored through reconstruction of biocenosis in wetlands. [Conclusion] It is feasible to implement matched ecological projects in semiarid regions in East Africa, providing references for restoration and protection of local water resources.

Did Ecological Engineering Projects Have a Significant Effect on Large-scale Vegetation Restoration in Beijing-Tianjin Sand Source Region, China？ A Remote Sensing Approach

Aiming for the restoration of degraded ecosystems, many ecological engineering projects have been implemented around the world. This study investigates the ecological engineering project effectiveness on vegetation restoration in the Beijing-Tianjin Sand Source Region(BTSSR) from 2000 to 2010 based on the rain use efficiency(RUE) trend in relation to the land cover. More than half of the BTSSR experienced a vegetation productivity increase from 2000 to 2010, with the increasing intensity being sensitive to the indicators chosen. A clear tendency towards smaller increasing areas was shown when using the net primary productivity(NPP, 51.30%) instead of the accumulated normalized difference vegetation index(59.30%). The short-term variation in the precipitation and intra-seasonal precipitation distribution had a great impact on the remote sensing-based vegetation productivity. However, the residual trends method(RESTREND) effectively eliminated this correlation, while incorporating the variance and skewness of the precipitation distribution increased the models′ ability to explain the vegetation productivity variation. The RUE combined with land cover dynamics was valid for the effectiveness assessment of the ecological engineering projects on vegetation restoration. Particularly, the result based on growing season accumulated normalized difference vegetation index(ΣNDVI) residuals was the most effective, showing that 47.39% of the BTSSR experienced vegetation restoration from 2000 to 2010. The effectiveness of the ecological engineering projects differed for each subarea and was proportional to the strength of ecological engineering. The water erosion region dominated by woodland showed the best restoration, followed by the wind-water erosion crisscross regions, while the wind erosion regions dominated by grassland showed the worst effect. Seriously degraded regions still cover more area in the BTSSR than restored regions. Therefore, more future effort should be put in restoring degraded land.

Relationship between multi-scale climate factors and performance of ecological engineering on the Loess Plateau, China

The long-term “Grain-to-Green Program” (GGP) on China’s Loess Plateau is a major global ecological engineering project which has significantly boosted vegetation renewal. Some studies have found that the rate of restoration is quite rapid during the implementation of ecological engineering, however, the influence of multi-scale climatic conditions on the performance of ecological engineering is unclear. In this study, multiple sources of remote sensing data were used to estimate the dynamics of vegetation structural and functional indicators, water-related local climatic factors, and atmospheric circulation factors. These datasets were also used to detect possible causes for vegetation restoration on the Loess Plateau over the past 20 years. The results show that widespread increases in rates of normalized difference vegetation indexes (NDVI), leaf area indexes (LAI), gross primary production (GPP), and aboveground biomass carbon (ABC) during 2000–2016 were significantly higher than before 2000. GPP was significantly correlated with rainfall and surface runoff on a monthly scale, and there were significant positive correlations between GPP and atmospheric circulation. Our results demonstrate that both vegetation structural and functional indicators rapidly increase, and ecological engineering greatly accelerated vegetation restoration after 2000. Local climatic conditions and atmospheric circulation patterns enhance vegetation growth and impact of ecological engineering.

Ecological engineering land treatment systems──A new development in China

This paper elucidated the necessity and possibility of developing the technology of land treatment on the basis of the analysis of shortage and pollution status of water resources in China.The historical development of this technology in the world was briefly reviewed and the distinction between land treatment and conventional wastewater irrigation was discussed in details. The fundamental characteristics and functions as well as the integrity and compatibility of this ecological engineering were also summarized. It was finally concluded that this technology for wastewater treatment has broad prospects of application in China.

Conceptual understandings of the ecological engineering issues in China and abroad

The research on ecological engineering has been lasting for more than four decades. As a new, cheaper, environmentally acceptable and alternative techniques, ecological engineering has been applied to many aspects, including ecoagricultural engineering, ecosystem restoration, environmental conservation, and pollution control. This paper presents a conceptual understanding on the issues of ecological engineering, including its origin, concepts, goals, principles and applications.

Benefit measurement of the soil and water conservation for ecological forestry engineering

Data were collected from Three-north Region, Middle and upper reaches region of Yangtze River and Coastal region. By analysis of factors influencing soil erosion, the longitude, latitude, annual precipitation, and the slope degree were selected as regional independent variables and canopy density and stock litter were selected as independent variables, and integral diffusing models were established for evaluation of the benefit of soil and water conservation of forest. By solving the parameters of models using the package of STATISTICA, the Power function between independent variables and dependent variables was set up. The soil conservation amount of forest and economic values were estimated using the contrast method for the ecological forestry engineering of the above three areas.

Designing principles of an ecological water storage basin on coastal saline: a case study

The degradation of water source environment becomes serious problems accompanying with rapid urbanization in China. Ecological engineering provides ecologically sound and cost effective solution to solving this problem. As a case study, a 15 hm 2 ecological water storage basin for a water plant was designed and constructed on the TEDA area in Tianjin City. Located on saline, the construction of this project has to face serious difficulties, such as high salinity, scarce seed banks of macrophytes, and strong winds. Freshwater replacement, soil amendation and macrophytes planting at the basinshore, wooden water breaker and plastic membrane installation and other measures were conducted for the assistance of plant community establishment. The result showed that the chloride concentration in the basin water decreased from 11600 mg/L to less than 100 mg/L, and the chloride content in the basin sediment decreased from 2 1% to 0 35% after freshwater soaking. The introduced macrophytes of 8 species all survived and 11 other macrophytes species were occurred in the basin. A new ecosystem was created with increased biological diversity in the original saline, and the water quality was improved. This ecological water storage basin also provided a pleasing landscape for local people.

Role of bioengineering structures made of willow cuttings in marly sediment trapping: assessment of three real-size experiments in the Southern French Alps

Improving knowledge on the ability of bioengineering structures made of willow cuttings to enhance efficient and sustainable sediment trapping in marly gullies in the Southern French Alps under a mountainous Mediterranean climate, to decreasesediment trapped per experiment, the mean annual values reached 0.25, 0.14 and 0.08 m3 yr-1 in experiments C, A and B, respectively. Maximum values for one structure reached 1.94 m3 per year in experiment C. The significance of the volumes ofsediment yield at their outlets, is a key issue today for the international scientific community working in geosciences and ecology. This study therefore aims to assess three real-size experiments(A, B and C) carried out between 2003 and 2013 in this environment. A total of 157 bioengineering structures using purple and white willow(Salix purpurea and Salix incana)cuttings – which have been shown to resprout and survive more than 2 years after their installation,corresponding to brush layers with brush mats on wooden sills(BLM), 1.2 m wide and 2 m long,installed on the floors of 33 experimental marly gullies, were monitored. The results showed that sediment trapping occurred upstream of the vegetation barriers from the 1 st year onwards.Considering the depth of sediment trapped per experiment, the mean annual values reached 11.2 cm yr-1 after 3 years in experiment A, 7.7 cm yr-1 after 2–4 years in experiment C and 5.1 cm yr-1 after 5 years in experiment B. Occasionally, BLMs showed that they could trap up to 16 and 15 cm yr-1 in experiments A and C, respectively. Considering the volumes oftrapped sediment and the sustainability of sediment trapping are discussed, and rules for bioengineering strategies are proposed.

Theory and Methodology of Ecosystem Engineering

Ecosystems engineering is specially designed for study and management of ecosystems. Its theory and method-ology are mainly derivcd from systems ecology and systems engineering An ecosystem is a biologically functional entityconsisting of organisms, environmental factors and their interactional mechanisms which are naturally or artificially ar-ranged with their approytiate functions in the system and also subordinaled to the dynamics of the whole ecosystem If an ecosystem is broken or disintegrated into independent or isolated parts. its structural and functional entity will be greatly modified or even completely destroyed Yet without participation of organisms including human beings, a system is not anecosystem. Within an ecosystem, all life, production and social activities are directly or indirectly rclated to the energy flowand material exchange In fact. energy is a driving force for material exchange and material is the carrier of energy flowTherefore, an ecosystem can be logically recognized as an energy system Its components. structure, function. production,quality and benefits can be expressed, calculated and modelled in terms of energy. Ecoboundary theory is also used in thediscussion of pathways of energy flow. As being applied to agrolioresty management, envirommental conservation and com-munity social service which are all complicated ecosystems, ecosystem engineering requires a series of programming meas-ures such as investigation, decision-making, planning, simulating, design, establishment, management, evaluation and reno-vation so that an appropriate ecosystem with stable structure, ellective function and high productivity can be established forits expected economic, ecological and social benefits.

Eco-engineering for wastes treatment in process of alcohol production

The strategies of coordination between production activities of alcohol and the comprehensive utilization of its by products was discussed in this paper. It can be concluded from the study that guided by the principles of ecological engineering the purposes of both environment protecting and higher profits gaining can be realized simultaneously with less input than other engineering forms. Within this case, the by products, CO 2,wastewater, distillers' grain, navel and mixed oil were treated as resources for certain purpose such as using as raw materials to produce fuel, forage and fertilizer. The rings earlier broken or given up by human behaviors were connected properly or added, and some high efficient rings were re added. The economic benefits getting from the treatment of by products occupy 10.39% of the total output or 1.17 times of the net output without environmental impacts.

Ecological construction-An alternative developing way for developing countries

Based on case studies and experience of Chinese urban and rural development, the concept of ecological construction may be the feasible way for developing countries.

Health risk assessment of heavy metals in soils and crops in a mining area(Au-Ag-Cutrona-oil et al.) of the Nanyang Basin, Henan Province, China

Heavy metal distribution in mining areas has always been a hot research topic due to the special environment of these areas. This study aims to explore the impact of heavy metal pollution on soils and crops in the study area, ensure the safety of local crops and the health of local residents, and provide a basis for the subsequent environmental restoration and the prevention and control of environmental pollution. Based on the analysis of the heavy metal concentrations in local soils and crops, the study investigated the spatial distribution, pollution degrees, and potential ecological risks of heavy metals in the farmland of a mining area in the southeastern Nanyang Basin, Henan province, China explored the sources of heavy metals and assessed the health risks caused by crop intake. The results of this study are as follows. The root soils of crops in the study area suffered heavy metal pollution to varying degrees. The degree of heavy metal pollution in maize fields is higher than that in wheat fields, and both types of fields suffer the most severe Cd pollution. Moreover, the root soils of different crops suffer compound pollution.The root soils in the maize fields suffer severe compound pollution at some sampling positions, whose distribution is similar to that of the mining area. Cd poses the highest potential ecological risks among all heavy metals, and the study area mainly suffers low and moderate comprehensive potential ecological risks. The principal component analysis(PCA) shows that the distribution of Zn, Cd, Pb, and As in soils of the study area is mainly affected by anthropogenic factors such as local mining activities;the distribution of Cr and Ni is primarily controlled by the local geological background;the distribution of Hg is mainly affected by local vehicle exhaust emissions, and the distribution of Cu is influenced by both human activities and the geological background. Different cereal crops in the study area are polluted with heavy metals dominated by Cd and Ni to varying degrees, especially wheat. As indicated by the health risk assessment results, the intake of maize in the study area does not pose significant human health risks;however, Cu has high risks to human health, and the compound heavy metal pollution caused by the intake of wheat in the study area poses risks to the health of both adults and children. Overall, the soils and crops in the study area suffer a high degree of heavy metal pollution, for which mining activities may be the main reason.

Biophysical warming patterns of an open-top chamber and its short-term influence on a Phragmites wetland ecosystem in China

Passive-warming, open-top chambers(OTCs) are widely applied for studying the effects of future climate warming on coastal wetlands. In this study, a set of six OTCs were established at a Phragmites wetland located in the Yellow River Delta of Dongying City, China. With data collected through online transmission and in-situ sensors, the attributes and patterns of realized OTCs warming are demonstrated.The authors also quantified the preliminary influence of experimental chamber warming on plant traits.OTCs produced an elevated average air temperature of 0.8°C(relative to controls) during the growing season(June to October) of 2018, and soil temperatures actually decreased by 0.54°C at a depth of 5 cm and 0.46°C at a depth of 30 cm in the OTCs. Variations in diel patterns of warming depend greatly on the heat sources of incoming radiation in the daytime versus soil heat flux at night. Warming effects were often larger during instantaneous analyses and influenced OTCs air temperatures from-2.5°C to 8.3°C dependent on various meteorological conditions at any given time, ranging from cooling influences from vertical heat exchange and vegetation to radiation-associated warming. Night-time temperature depressions in the OTCs were due to the low turbulence inside OTCs and changes in surface soilatmosphere heat transfer. Plant shoot density, basal diameter, and biomass of Phragmites decreased by23.2%, 6.3%, and 34.0%, respectively, under experimental warming versus controls, and plant height increased by 4.3%, reflecting less carbon allocation to stem structures as plants in the OTCs experienced simultaneous wind buffering. While these passive-warming OTCs created the desired warming effects both to the atmosphere and soils, pest damages on the plant leaves and lodging within the OTCs were extensive and serious, creating the need to consider control options for these chambers and the replicated OTCs studies underway in other Chinese Phragmites marshes(Panjin and Yancheng).

Source,migration,distribution,toxicological effects and remediation technologies of arsenic in groundwater in China

Groundwater with high arsenic(As) content seriously threatens human life and health. Drinking high-As groundwater for a long time will lead to various pathological changes such as skin cancer, liver cancer,and kidney cancer. High-As groundwater has become one of the most serious environmental geological problems in China and even internationally. This paper aims to systematically summarize the sources,migration, distribution, toxicological effects, and treatment techniques of As in natural groundwater in China based on a large number of literature surveys. High-As groundwater in China is mainly distributed in the inland basins in arid and semi-arid environments and the alluvial and lacustrine aquifers in river deltas in humid environments, which are in neutral to weakly alkaline and strongly reducing environments.The content of As in groundwater varies widely, and As(Ⅲ) is the main form. The main mechanism of the formation of high-As groundwater in China is the reduced dissolution of Fe and Mn oxides under the action of organic matter and primary microorganisms, alkaline environment, intense evaporation and concentration, long-term water-rock interaction, and slow groundwater velocity, which promote the continuous migration and enrichment of As in groundwater. There are obvious differences in the toxicity of different forms of As. The toxic of As(Ⅲ) is far more than As(V), which is considered to be more toxic than methyl arsenate(MMA) and dimethyl arsenate(DMA). Inorganic As entering the body is metabolized through a combination of methylation(detoxification) and reduction(activation) and catalyzed by a series of methyltransferases and reductases. At present, remediation methods for high-As groundwater mainly include ion exchange technology, membrane filtration technology, biological treatment technology, nanocomposite adsorption technology, electrochemical technology, and so on. All the above remediation methods still have certain limitations, and it is urgent to develop treatment materials and technical means with stronger As removal performance and sustainability. With the joint efforts of scientists and governments of various countries in the future, this worldwide problem of drinking-water As poisoning will be solved as soon as possible. This paper systematically summarizes and discusses the hot research results of natural high-As groundwater, which could provide a reference for the related research of high-As groundwater in China and even the world.

Design Efficacy Evaluation of a Landscape Information Modeling-Stable Diffusion(LIM-SD)-based Approach for Ecological Engineered Landscaping Design:A Case Study of an Urban River Wetland

This study introduces a Landscape Information Modeling±Stable Diffusion(LIM±SD)-based digital workflow for ecological engineered landscaping(EEL)design,focusing on urban river wetlands.It explores how students from diverse academic backgrounds perform EEL tasks using the LIM±SD approach.A total of 30 participants,including industrial design postgraduates and landscape architecture undergraduates and postgraduates,completed the design tasks.The efficacy of their designs was assessed through expert evaluations on site appropriateness,aesthetics,spatial layout,and eco-engineering techniques of the design proposals,as well as the parametric simulation which calculated the vegetation coverage rate and proportion of riparian areas for each design.Moreover,evaluation of participants’subjective design experiences was conducted via questionnaires.Results indicated that landscape architecture postgraduates outperformed others applying ecological engineering principles.The study also elucidated discrepancies between LIM models and SD-generated renderings,as well as the uncertainty of SDgenerated renderings,suggesting improvements are needed to align digital outputs with ecological design criteria.

Habitat evaluation for target species following deep-water channel project in the Yangtze River

In order to optimize the design of a 12.5 m deepwater channel project and protect the ecological environment, it is necessary to study the habitat evaluation of species in the engineered area. A coupled eco-hydrodynamic model, which combines a hydrodynamic model （ADCIRC） and a habitat suitability index （HSI） model is developed for target fish （Coilia nasus） and benthos （Corbicula fluminea） in the Yangtze River in order to predict the ecological changes and optimize the regulation scheme. Based on the existing research concerning the characteristics of Coilia nasus and Corbicula fluminea, the relationship between the target species and water environment factors is established. The verification results of tidal level, velocity and biological density show that the proposed coupling model performs well when predicting ecological suitability in the studied region. The results indicate a slight improvement in the potential habitat availability for the two species studied as the natural hydraulic conditions change after the deep-water channel regulation works.

Restoration and Rational Use of Degraded Saline Reed Wetlands:A Case Study in Western Songnen Plain, China

The protection, restoration and sustainable use are key issues of all the wetlands worldwide. Ecological, agronomic, and engineering techniques have been integrated in the development of a structurally sound, ecologically beneficial engineering restoration method for restoring and utilizing a degraded saline wetland in the western Songnen Plain of China. Hydrological restoration was performed by developing a system of biannual irrigation and drainage using civil engineering measures to bring wetlands into contact with river water and improve the irrigation and drainage system in the wetlands. Agronomic measures such as plowing the reed fields, reed rhizome transplantation, and fertilization were used to restore the reed vegetation. Biological measures, including the release of crab and fish fry and natural proliferation, were used to restore the aquatic communities. The results of the restoration were clear and positive. By the year 2009, the reed yield had increased by 20.9 times. Remarkable ecological benefits occurred simultaneously. Vegetation primary-production capacity increased, local climate regulation and water purification enhanced, and biodiversity increased. This demonstration of engineering techniques illustrates the basic route for the restoration of degraded wetlands, that the biodiversity should be reconstructed by the comprehensive application of engineering, biological, and agronomic measures based on habitat restoration under the guidance of process-oriented strategies. The complex ecological system including reeds, fish and crabs is based on the biological principles of coexistence and material recycling and provides a reasonable ecological engineering model suitable for the sustainable utilization of degraded saline reed wetlands.

Microplastic pollution in Yellow River,China:Current status and research progress of biotoxicological effects

This study aims to comprehensively assess the environmental risks of microplastics in the Yellow River,achieving the following results through comprehensive research.The average microplastic abundances in the river waters and sediments are 5358-654000 n/m3 and 43.57-615 items/kg,respectively,and there are fewer microplastics in water samples than in sediments.Microplastics in the study area can be divided into five types according to their occurrence morphologies,namely fragments,foams,films,fibers,and particles.The most widely distributed pollution types in sediments include debris,fibers,and particles.In contrast,fibers are the dominant type in water samples,accounting for 68.18%‒98.93%.The chemical components of the microplastics include polyethylene,polypropylene,polystyrene,polyethylene terephthalate,and polyvinyl chloride.The microplastics are in four colors,with white accounting for a higher proportion.The grain size of the microplastics in tributaries or lakes of the Yellow River is less than 2 mm,which makes them liable to enter organisms for enrichment.Furthermore,the sources of the microplastics are closely related to agricultural and industrial production and biological activities in habitats and exhibit seasonal and hydrological characteristics.The microplastics in the study area show the adsorption of metals and nonmetals to different degrees,which increases the pollution risks of heavy metals combined with microplastics.In addition,microplastics can accumulate in organisms in the Yellow River and cause physical,biochemical,and other damage to aquatic organisms,thus further posing carcinogenic risks to human beings.Therefore,it is necessary to study,monitor,and control the pollution and effects of microplastics in the Yellow River,in order to provide theoretical references for the control of pollution and ecological risk of microplastics in the river.

Effects of sesame nectar on longevity and fecundity of seven Lepidoptera and survival of four parasitoid species commonly found in agricultural ecosystems

Ecological engineering involves the use of plants to promote establishment, survival and efficiency of natural enemies in agricultural systems. Some plant species may be hosts or provide resources to some pest species. We assessed the risks and benefits of sesame （Sesamum indicum L.）, as a nectar source for seven economically important Lepidopteran pest and four parasitoid species in a range of vegetable crop systems. Our results showed that the mean Iongevities of arthropod parasitoids Pteromalus puparum （L.）, Encarsia sophia （Girault ＆ Dodd） and male Microplitis tuberculifer （Wesmael） were significantly extended when fed on sesame flowers compared to the water control. Sesame flowers had no effect on adult Iongevities and fecundities of six out of the seven Lepidoptera pest species tested except Plutella xyllostella （L.） females laid more eggs when fed on sesame flowers. It is likely that the increased fecundity is due to accessibility to nectar at the bottom of corolla because of their smaller body sizes. Our findings provide a first step towards better understanding of the risks and benefits of using sesame to implement ecological engineering for the management of vegetable pests.