期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
Comprehensive Study,Design and Economic Feasibility Analysis of Solar PV Powered Water Pumping System
1
作者 K.Karthick K.Jaiganesh S.Kavaskar 《Energy Engineering》 EI 2021年第6期1887-1904,共18页
The energy efficient product can be operated with longer duration.They offer wonderful solutions compared to other conventional water pumping system as it needs less maintenance,simple in installation,zero fuel cost,l... The energy efficient product can be operated with longer duration.They offer wonderful solutions compared to other conventional water pumping system as it needs less maintenance,simple in installation,zero fuel cost,longer operating life,highly reliable and free from production of greenhouse gases.In this paper we analyzed the different topologies of DC–DC converter in terms of their operating region of MPPT,quality of input and output currents.We discussed the MPPT algorithms to address partial shading effects in SPV array,present state of the technology,factors affecting the performance of the system,efficiency improvements and identified the research gaps.Also,the economic feasibility analysis has been done for the real time scenario using the Homer Pro software.The estimation of total dynamic head and horse power calculation has been done to decide the total load capacity.The economic analysis results such as cumulative cash flow over project lifetime of 25 years are presented.It is observed that the capital investment requirement is$7,425 for installing Fronius PV system that has a nominal capacity of 2.47 kW and annualized savings will be$134.93.In the long-term perspective,the return on investment is−2.18%as per the present tariff plan. 展开更多
关键词 DC-DC converter economic feasibility analysis MPPT solar photo voltaic solar pumps water pumping system
下载PDF
A Schematic Simulation for Health Economic Feasibility Studies: Results from a Model for Cardiac Remote Monitoring
2
作者 Christian Elsner Guiseppe Boriani +2 位作者 Dennis Häckl Steffen Desch Holger Thiele 《Open Journal of Modelling and Simulation》 2016年第3期118-128,共11页
The market for active implants and biosensors is of high economic and medical interest. As health economic considerations get into focus in terms of business planning and reimbursement, valid and flexible economic fea... The market for active implants and biosensors is of high economic and medical interest. As health economic considerations get into focus in terms of business planning and reimbursement, valid and flexible economic feasibility studies get more important. Unfortunately, literature mostly provides only single economic views on specific aspects like cost savings from reduced rehabilitation in a special patient cohort. To make planning and technology value negotiation more effective and more valid, a methodology to collect relevant data from different studies and normalize it to a common set of parameters was developed for the field of cardiac monitoring in a mixed example population with an approach of simple external weight, ECG and blood-pressure measurement or implanted devices for cardiac monitoring. The target entities taken into account by the simulation model were the impacts on heart attack, stroke, heart failure and the process of implant monitoring. Simulation took place at an example population of 500 patients with specific morbidity criteria. The health economic value was calculated over a period of three years and was split into a technology effectiveness measurement in Quality-adjusted-Lifetime-Years (QALYs) and a “cost- saving-part”. QALYs were chosen as technology effectiveness parameter for a combined and weighted mortality- and morbidity-reduction. Allocating 24.000 Euro to a saved QALY, 42% of the cost would be allocated to QALYs meaning money being spent for gained lifetime-years. The remaining 58% would be the different real cost savings: a per patient gross saving of 3.308 € per year would result for that part (21% on heart attack, 3% on stroke, 68% on heart failure and 8% on implant monitoring). Up-to-date studies do not provide a simple mechanism to allow custom-tailored health economic feasibility study results in terms of other specific population mixes or outcome parameters. Target audiences for the methodology of the described simulation are payors and solution providers targeting a specific patient population or specific telemedical situations. This way product development can address market-related needs more specific and healthcare providers can compare different outcome parameters in the given entities. 展开更多
关键词 economic feasibility Health economics Active Implants SIMULATION Biosensors Technology Effectiveness
下载PDF
Environment and economic feasibility of municipal solid waste central sorting strategy: a case study in Beijing 被引量:1
3
作者 Hua ZHANG Zongguo WEN Yixi CHEN 《Frontiers of Environmental Science & Engineering》 SCIE EI CAS CSCD 2016年第4期115-125,共11页
Although Beijing has carried out municipal solid waste (MSW) source separation since 1996, it has largely been ineffective. In 2012, a "Green House" program was established as a new attempt for central sorting. In... Although Beijing has carried out municipal solid waste (MSW) source separation since 1996, it has largely been ineffective. In 2012, a "Green House" program was established as a new attempt for central sorting. In this study, the authors used material flow analysis (MFA) and cost benefit analysis (CBA) methods to investigate Green House's environment and economic feasibility. Results showed that the program did have significant environmental benefits on waste reduction, which reduced the amount of waste by 34%. If the Green House program is implemented in a residential community with wet waste ratio of 66%, the proportion of waste reduction can reach 37%. However, the Green House is now running with a monthly loss of 1982 CNY. This is mainly because most of its benefits come from waste reduction (i.e., 5878 CNY per month), which does not turn a monetary benefit, but is instead distributed to the whole of society as positive environmental externalities. Lack of government involvement, small program scale, and technical/managerial deficiency are three main barriers of the Green House. We, thus, make three recommendations: involve government authority and financial support, expand the program scale to separate 91.4 tons of waste every month, and use more professional equipment/technologies. If the Green House program can successfully adopt these suggestions, 33.8 tons of waste can be reduced monthly, and it would be able to flip the loss into a profit worth 35034 CNY. 展开更多
关键词 Environment and economic feasibility Municipal solid waste (MSW)Waste central sorting Green House
原文传递
Comprehensive Analysis of 9-year Running Data of A^2/O-MBR in Xi an Siyuan University 被引量:8
4
作者 Xuemei ZHANG Jingyuan HAO +3 位作者 Qinghua MA Dong LI Bo FU Baolan QIN 《Meteorological and Environmental Research》 CAS 2020年第5期139-143,共5页
Since September 2011,A 2/O-MBR wastewater treatment plant in Xi'an Siyuan University has been successfully running without replacing any of membrane modules.A total of 6.661 million m^3 of campus wastewater has be... Since September 2011,A 2/O-MBR wastewater treatment plant in Xi'an Siyuan University has been successfully running without replacing any of membrane modules.A total of 6.661 million m^3 of campus wastewater has been treated,and 4.405 million m^3 of water reaching the national urban miscellaneous water standard has been reclaimed and reused.A total of 25 km pipeline,5 pits,scenery fountains,lakes,and 12 pump stations have been constructed for flushing toilets,irrigating green grass lawn and afforest,and cleaning hardened pavement.The design and construction of 5 pits,scenery fountains,and lakes are important to meet the national urban miscellaneous water standard under occasional phosphorus and/or nitrogen exceed concentration.The unit water cost is 4.19 yuan/m^3,including membrane modules depreciation and amortization.After the A 2/O-MBR system passes the membrane modules depreciation and amortization period,the unit water cost is 2.82 yuan/m^3.The water productivity of the membrane stack rises first at the beginning of operation,reaches the maximum value,and then decreases.The average annual transmembrane pressure difference increases by 1.12 kPa.The average VMD of industrial permeability decreases annually by 0.45 m^3. 展开更多
关键词 Wastewater treatment and reuse system A 2/O-MBR system economic feasibility Industrial permeability Membrane fouling
下载PDF
Easy proft maximization method for open-pit mining
5
作者 C.Dinis da Gama 《Journal of Rock Mechanics and Geotechnical Engineering》 SCIE CSCD 2013年第5期350-353,共4页
A methodology applicable at any phase of a surface mining project for evaluating its current technical and economic feasibility is presented.It requires the typically available quantitative data on the ore-body,with i... A methodology applicable at any phase of a surface mining project for evaluating its current technical and economic feasibility is presented.It requires the typically available quantitative data on the ore-body,with its three-dimensional block model developed upon accurate interpolations.Thus it allows estimations of exploitable reserves in function of various cut-off grades,such as the average grade of mineable ore,the tonnages of ore and waste rock,stripping ratios and proft estimates for different production levels.If cost evaluations of essential mine operations are available(such as ore mining,waste removal,ore concentration,transportation,indirect project costs and expected concentrate selling prices),the methodology will provide clear indications on the economic feasibility of mining,including the best available options at any moment.Simple expressions are developed on the basis of a proft mathematical function and an application example is presented with data available from an existing iron ore deposit. 展开更多
关键词 Open-pit Proft maximization Ore grade Stripping ratio economic feasibility
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部