Edge defect analysis of high-strength corrosion-resistant steel

In this study, a 600 MPa hot-rolled corrosion-resistant steel plate produced by a specific company is investigated. Edge jagged defects and edge surface defects generated on both sides of the strip during production are characterized and analyzed. The results indicate that the distribution of reoxidation granules is located underneath the surface peel and that copper-containing granules diffuse along austenite grain boundaries. This phenomenon combined with the chemical composition and production parameters of a strip indicate that copper brittleness leads to edge jagged defects. However,the surface defects should be attributed to inherent defects on the surface of the strip. Measures that prevent surface oxidation and copper segregation at grain boundaries would likely eliminate these two types of edge defects.

Immunity of electronic and transport properties of phosphorene nanoribbons to edge defects

We present an extensive study of the electronic properties and carrier transport in phosphorene nanoribbons （PNRs） with edge defects by using rigorous atomistic quantum transport simulations. This study reports on the size- and defect-dependent scaling laws governing the transport gap, and the mean free path and carrier mobility in the PNRs of interest for future nanoelectronics applications. Our results indicate that PNRs with armchair edges （aPNRs） are more immune to defects than zig-zag PNRs （zPNRs）, while both PNR types exhibit superior immunity to defects relative to graphene nanoribbons （GNRs）. An investigation of the mean free path demonstrated that even in the case of a low defect density the transport in PNRs is diffusive, and the carrier mobility remains a meaningful transport parameter even in ultra-small PNRs. We found that the electron-hole mobility asymmetry （present in large-area phosphorene） is retained only in zPNRs for W 〉 4 nrn, while in other cases the asymmetry is smoothed out by edge defect scattering. Furthermore, we showed that aPNRs outperform both zPNRs and GNRs in terms of carrier mobility, and that PNRs generally offer a superior mobility-bandgap trade-off, relative to GNRs and monolayer MoS2. This work identifies PNRs as a promising material for the extremely scaled transistor channels in future posbsilicon electronic technology, and presents a persuasive argument for experimental work on nanostructured phosphorene.

Analytical solution for the stress field of hierarchical defects:multiscale framework and applications

Hierarchical defects are defined as adjacent defects at different length scales.Involved are the two scales where the stress field distribution is interrelated.Based on the complex variable method and conformal mapping,a multiscale framework for solving the problems of hierarchical defects is formulated.The separated representations of mapping function,the governing equations of potentials,and the stress field are subsequently obtained.The proposed multiscale framework can be used to solve a variety of simplified engineering problems.The case in point is the analytical solution of a macroscopic elliptic hole with a microscopic circular edge defect.The results indicate that the microscopic defect aggregates the stress concentration on the macroscopic defect and likely leads to global propagation and rupture.Multiple micro-defects have interactive effects on the distribution of the stress field.The level of stress concentration may be reduced by the coalescence of micro-defects.This work provides a unified method to analytically investigate the influence of edge micro-defects within the scope of multiscale hierarchy.The formulated multiscale approach can also be potentially applied to materials with hierarchical defects,such as additive manufacturing and bio-inspired materials.

Key technologies of roll forming automobile components with AHSS

Lightweight design is one of the development trends of the automobile industry. An effective way to achieve lightweight auto bodies is to use AHSS （advanced high strength steel ） for the safety components of automobiles. This study has taken doorsill reinforcements made of martensite AHSS as the object ,and performed research on the AHSS roll forming technologies and prototype development of typical asymmetric open components. By means of finite element analysis （FEA） and simulation,studies have been carried out on the springback and edge wave defects during AHSS roll forming ,and an optimized process design has been achieved. The generation mechanisms of vertical bows ,horizontal cambers, twists,pre-punched hole distortion and cut end flare have been analyzed,and solutions to these defects have been given. In addition,tesing of the roll forming process for AHSS has been conducted and typical samples with required dimensional accuracy have been manufactured. This study has provided technical support for the large-scale application of AHSS.

Defect engineering of water-dispersible g-C_(3)N_(4) photocatalysts by chemical oxidative etching of bulk g-C_(3)N_(4) prepared in different calcination atmospheres

In this study,water-dispersible graphitic carbon nitride(g-C_(3)N_(4))photocatalysts were successively prepared through the chemically oxidative etching of bulk g-C_(3)N_(4) that was polymerized thermally in different calcination atmospheres such as air,CO_(2),and N_(2).The different calcination atmospheres directly influenced the physicochemical and optical properties of both bulk and water-dispersible g-C_(3)N_(4),changing the photocatalytic degradation behavior of methylene blue(MB)and tetracycline hydrochloride(TCHCl)for water-dispersible g-C_(3)N_(4).The bubble-burst process in the thermal polymerization of thiourea produced defective edges containing C=O groups that preferred substituting the C-NHx groups over bulk g-C_(3)N_(4).In the oxygen-free N_(2) atmosphere among the different calcination atmospheres,more C=O functional groups were generated on the defective edges of bulk g-C_(3)N_(4),resulting in the highest N vacancy of the tri-s-triazine structure.During the successive chemical oxidation,S-or O-containing functional groups were introduced onto water-dispersible g-C_(3)N_(4).The water-dispersible g-C_(3)N_(4) photocatalyst from the oxygen-free N_(2) atmosphere(NTw)contained the most O-and S-functional groups on the g-C_(3)N_(4) surface.Consequently,NTw exhibited the highest photocatalytic activity in the MB and TC-HCl photodegradation because of its slowest recombination process,which was ascribed to the unique surface properties of NTw such as abundant functional groups on the defective edges and N-deficient property.

A green strategy for porous biochar fabrication with superior capacity for peroxydisulfate activation to degrade sulfadiazine:the cooperative role of C-sp^(3) and specific surface area

Metal-free porous biochars are popularly utilized as catalysts for peroxydisulfate(PDS)activation.The enhancement effect of PDS activation of porous biochars fabricated by employing both hard template and alkali metal activating agent has not been explored completely.In addition,the role of the inherent carbon defect in PDS activation has not been clearly elucidated.Hence,a series of carbonaceous catalysts were fabricated using a sole template(KCl),a sole activating agent(Na_(2)S_(2)O_(3))or a combination of template and activating agent(KCl/Na_(2)S_(2)O_(3),KCl/KHCO_(3),KCl/NaHCO_(3),and KCl/Na_(2)C_(2)O_(4)),to systematically investigate the effect of specific surface area(SSA)and intrinsic defect of porous biochar on its PDS activation ability.The biochar synthesized by KCl and Na_(2)S_(2)O_(3)(SK-C)exhibited the optimum degradation performance.The SK-C was found to possess an interconnected hollow cage with three-dimensional mesh structure showing the largest surface area,pore volume and C-sp^(3) edge defect content among all the catalysts,which explained its paramount catalytic ability.The SSA and C-sp^(3) content together can determine the catalytic performance in a quantitative relationship.The single electron transfer pathway from SDZ to inner-sphere bound SK-C/PDS*was the protagonist of pollutant oxidation.The degradation intermediates were detected and recognized and their toxicities were evaluated.This study for the first time comprehensively identified the synergistic effect between the SSA and inherent defects on improving the catalytic performance of biochar for PDS activation to removal contaminants.