Automatic width control is a key issue in hot strip rolling process. The edge rolling has been widely used in the roughing stand of hot strip mill to control the width of the slab. However, the edge rolling and conseq...Automatic width control is a key issue in hot strip rolling process. The edge rolling has been widely used in the roughing stand of hot strip mill to control the width of the slab. However, the edge rolling and consequent hori- zontal rolling will cause a significant width change in the head part and tail part of the slab, which have to be trimmed before the finishing stands. Based on the width reduction deformation curve of the head and tail along the longitudinal direction of slab, the short stroke control （SSC） technology has been developed to overcome this problem. The finite element method has been used to simulate the unsteady edge rolling process. Three short stroke control curves have been compared in order to obtain the best width control result. The optimized short stroke control curve has been ap- plied to the automatic width control system of industrial hot rolling mill, and good performance is obtained.展开更多
Dimensions of one kind of stainless steel plate before finish rolling were obtained through analysis of the rough rolling processes by finite element method and updated geometrical method. The FE models of finish roll...Dimensions of one kind of stainless steel plate before finish rolling were obtained through analysis of the rough rolling processes by finite element method and updated geometrical method. The FE models of finish rolling process with a front edge roll were built, and influences of the edge rolling reduction on the stress change in the plate edge during finish rolling were analyzed. The results show that when the edge rolling reduction is increased from 0 mm to 2 mm, the compressive stress in plate corner clearly increases in edge rolling process, and the zone of tensile stress during whole rolling decreases; when the edge rolling reduction is increased from 2 mm to 5 ram, the compressive stress in the plate corner seldom changes, and the compressive stress decreases after the horizontal rolling.展开更多
基金Item Sponsored by National Science and Technology Support Programfor 11th Five-Year Plan of China (2006BAE03A13)International Cooperation Research Project of Shanxi Province (2009081013)
文摘Automatic width control is a key issue in hot strip rolling process. The edge rolling has been widely used in the roughing stand of hot strip mill to control the width of the slab. However, the edge rolling and consequent hori- zontal rolling will cause a significant width change in the head part and tail part of the slab, which have to be trimmed before the finishing stands. Based on the width reduction deformation curve of the head and tail along the longitudinal direction of slab, the short stroke control （SSC） technology has been developed to overcome this problem. The finite element method has been used to simulate the unsteady edge rolling process. Three short stroke control curves have been compared in order to obtain the best width control result. The optimized short stroke control curve has been ap- plied to the automatic width control system of industrial hot rolling mill, and good performance is obtained.
基金Item Sponsored by State Basic Research Key Projects (973) of China (2006CB605208-1)National Natural Science Foundation of China (50534020,50634030)
文摘Dimensions of one kind of stainless steel plate before finish rolling were obtained through analysis of the rough rolling processes by finite element method and updated geometrical method. The FE models of finish rolling process with a front edge roll were built, and influences of the edge rolling reduction on the stress change in the plate edge during finish rolling were analyzed. The results show that when the edge rolling reduction is increased from 0 mm to 2 mm, the compressive stress in plate corner clearly increases in edge rolling process, and the zone of tensile stress during whole rolling decreases; when the edge rolling reduction is increased from 2 mm to 5 ram, the compressive stress in the plate corner seldom changes, and the compressive stress decreases after the horizontal rolling.
