This paper documents a study to examine the sensitivity to cloud droplet effective radius and liquid water path and the alleviation the energy imbalance at the top of the atmosphere and at the surface in the latest ve...This paper documents a study to examine the sensitivity to cloud droplet effective radius and liquid water path and the alleviation the energy imbalance at the top of the atmosphere and at the surface in the latest version of the Grid-point Atmospheric Model of the State Key Laboratory of Numerical Modeling for Atmospheric Sciences and Geophysical Fluid Dynamics （LASG）, Institute of Atmospheric Physics （IAP） （GAMIL1.1.0）. Considerable negative biases in all flux components, and thus an energy imbalance, are found in GAMIL1.1.0. In order to alleviate the energy imbalance, two modifications, namely an increase in cloud droplet effective radius and a decrease in cloud liquid water path, have been made to the cloud properties used in GAMIL. With the increased cloud droplet effective radius, the single scattering albedo of clouds is reduced, and thus the reflection of solar radiation into space by clouds is reduced and the net solar radiation flux at the top of the atmosphere is increased. With the reduced cloud optical depth, the net surface shortwave radiation flux is increased, causing a net warming over the land surface. This results in an increase in both sensible and latent heat fluxes over the land regions, which is largely balanced by the increased terrestrial radiation fluxes. Consequently, the energy balance at the top of atmosphere and at the surface is achieved with energy flux components consistent with available satellite observations.展开更多
The flexible rolling process(FRP) is a novel three-dimensional(3 D) forming process that combines the multipoint and traditional rolling forming. The principle of FRP is based on thickness thinning, so the deformation...The flexible rolling process(FRP) is a novel three-dimensional(3 D) forming process that combines the multipoint and traditional rolling forming. The principle of FRP is based on thickness thinning, so the deformation path significantly impacts the forming effect. In this study, the multistep forming process with different deformation paths was introduced to improve the forming effect of FRP. For instance, with the convex surface part, three finite element models of multistep FRP(MSFRP) were established. The corresponding numerical simulations and forming experiments performed among different deformation paths showed the surface part with a longer effective forming region was obtained and the forming regions with more steps in MSFRP were smoother. Thus, the sheet-metal utilization rate was greatly improved. Moreover, the MSFRP can improve the longitudinal bending effect dramatically and thereby endowing the forming part with a better forming effect. Therefore, MSFRP is a prospective method for broad applications.展开更多
At present,higher education in China has entered the stage of popularization,and the"connotative development of higher education"has become the inevitable choice for the development of colleges and universit...At present,higher education in China has entered the stage of popularization,and the"connotative development of higher education"has become the inevitable choice for the development of colleges and universities in China.In the process of"connotative development"in higher education,we must realize the importance of discipline construction and optimize discipline layout and specialty construction,improve the quality of personnel trained by colleges and universities in order to satisfy the needs of social and economic development.On this basis,colleges and universities should,according to the market demand for talents,reform and innovate the talent training mode,continuously strengthen the construction of teaching staff,improve the quality of classroom teaching,effectively improve students'social practice capability,improve the quality of talent training,and take a connotative development path through school-enterprise cooperation and integration of production and teaching.展开更多
The influence of loading path on tube hydroforming process is discussed in this paper with finiteelement simulation. Four different loading paths are utilized in simulating the forming process of square tubular compo...The influence of loading path on tube hydroforming process is discussed in this paper with finiteelement simulation. Four different loading paths are utilized in simulating the forming process of square tubular component with hydroforming and the result of different loading path is presented. Among the result. the thickness distribution of bilinear loading path is the most uniform one. It shows that the increase of punch displacement in the stage of high pressure is beneficial to the forming of component for optimized Stress condition.展开更多
The problem of insufficient agricultural input has been restricting China's agricultural development. When the expansion of the use of capital has become a bottleneck restricting the agricultural development,the e...The problem of insufficient agricultural input has been restricting China's agricultural development. When the expansion of the use of capital has become a bottleneck restricting the agricultural development,the effective use of agricultural input resources will become an important way to increase agricultural input. Through building the value chain of interactive development between urban agriculture and other industries,it is expected to promote the reasonable allocation of resources,realize the conservation of resources and increase the efficiency of resource utilization,and promote the urban agricultural input to become an effective input. In this way,it can realize the transformation of agricultural development and the innovation of financing method of urban agriculture.展开更多
In the paper presented, 99 single seed descent barley lines as well as their parental forms Roland and Apex were studied. The grain weight components and their interrelations were analyzed using simple coefficients of...In the paper presented, 99 single seed descent barley lines as well as their parental forms Roland and Apex were studied. The grain weight components and their interrelations were analyzed using simple coefficients of correlation. The direct and indirect effects of such components on grain weight per plant and 1 000-grain weight were estimated using path analysis. In the 2006 and 2007, the spike length and number of spikelets per spike were the determinants of grain weight. Genetic parameters as additive and epistasis effects were estimated for all studied traits. The results indicate the importance of both additive and epistasis gene effects of number of spikes per plant, grain weight per spike, grain number per plant and grain weight per plant in this study.展开更多
This paper investigates the development,the breakdown process,and the discharge path selection of the lightning discharges in two-phase mixtures(TPMs).13 kinds of solid-gas mixtures and 3 kinds of liquid-gas mixtures ...This paper investigates the development,the breakdown process,and the discharge path selection of the lightning discharges in two-phase mixtures(TPMs).13 kinds of solid-gas mixtures and 3 kinds of liquid-gas mixtures are employed to study effect of two phase mixtures on the selection of the discharge path under lightning impulses.Grain size effects are shown upon these experimental results.When the diameter of solid or liquid grains is less than about 10 μm,the discharge path does not select TPM but air.And the discharge path selects TPM when the diameter is greater than about 100 μm.And when the diameter is between about 10 μm and 100 μm,the discharge path selects TPM under negative lightning impulses,but it has a greater selection of air than TPMs under positive lightning impulses.Volume fraction and permittivity of solid/liquid can also influence the selection of the discharge path.展开更多
This paper studies correlations between the spatial structure character of thermal forcing and deformation and the amplitude of rays of meridional wave train. It is shown that if thermal forcing appears a meridional l...This paper studies correlations between the spatial structure character of thermal forcing and deformation and the amplitude of rays of meridional wave train. It is shown that if thermal forcing appears a meridional linear variation the rays of quasi-stationary planetary wave may propagate along oblique lines and if the meridional variability of heat source has second order term the rays show distinct deformation as a great circular route. Additionally, the inhomogeneous distribution may cause lower frequency oscillations in mid- and low-latitudes. The combination of zonal and meridional wave numbers and distributive character of heat source may form an inverse mechanism of variational trend of generized wave energy, reflecting in some degree the physical process of transition between meridional and zonal flow patterns.展开更多
基金This work was jointly supported by the 973 Project(Grant No.2005CB321703)the National Natural Science Foundation of China(Grant No.40221503)the Chinese Academy of Sciences International Partnership Creative Group entitled"The Climate System Model Development and Application Studies".
文摘This paper documents a study to examine the sensitivity to cloud droplet effective radius and liquid water path and the alleviation the energy imbalance at the top of the atmosphere and at the surface in the latest version of the Grid-point Atmospheric Model of the State Key Laboratory of Numerical Modeling for Atmospheric Sciences and Geophysical Fluid Dynamics （LASG）, Institute of Atmospheric Physics （IAP） （GAMIL1.1.0）. Considerable negative biases in all flux components, and thus an energy imbalance, are found in GAMIL1.1.0. In order to alleviate the energy imbalance, two modifications, namely an increase in cloud droplet effective radius and a decrease in cloud liquid water path, have been made to the cloud properties used in GAMIL. With the increased cloud droplet effective radius, the single scattering albedo of clouds is reduced, and thus the reflection of solar radiation into space by clouds is reduced and the net solar radiation flux at the top of the atmosphere is increased. With the reduced cloud optical depth, the net surface shortwave radiation flux is increased, causing a net warming over the land surface. This results in an increase in both sensible and latent heat fluxes over the land regions, which is largely balanced by the increased terrestrial radiation fluxes. Consequently, the energy balance at the top of atmosphere and at the surface is achieved with energy flux components consistent with available satellite observations.
基金support given by the National Natural Science Foundation of China(No.51275202)
文摘The flexible rolling process(FRP) is a novel three-dimensional(3 D) forming process that combines the multipoint and traditional rolling forming. The principle of FRP is based on thickness thinning, so the deformation path significantly impacts the forming effect. In this study, the multistep forming process with different deformation paths was introduced to improve the forming effect of FRP. For instance, with the convex surface part, three finite element models of multistep FRP(MSFRP) were established. The corresponding numerical simulations and forming experiments performed among different deformation paths showed the surface part with a longer effective forming region was obtained and the forming regions with more steps in MSFRP were smoother. Thus, the sheet-metal utilization rate was greatly improved. Moreover, the MSFRP can improve the longitudinal bending effect dramatically and thereby endowing the forming part with a better forming effect. Therefore, MSFRP is a prospective method for broad applications.
文摘At present,higher education in China has entered the stage of popularization,and the"connotative development of higher education"has become the inevitable choice for the development of colleges and universities in China.In the process of"connotative development"in higher education,we must realize the importance of discipline construction and optimize discipline layout and specialty construction,improve the quality of personnel trained by colleges and universities in order to satisfy the needs of social and economic development.On this basis,colleges and universities should,according to the market demand for talents,reform and innovate the talent training mode,continuously strengthen the construction of teaching staff,improve the quality of classroom teaching,effectively improve students'social practice capability,improve the quality of talent training,and take a connotative development path through school-enterprise cooperation and integration of production and teaching.
基金Tabs paper is financially suPPorted by the NationalNatural Science Foundation of China (No. 59975021).
文摘The influence of loading path on tube hydroforming process is discussed in this paper with finiteelement simulation. Four different loading paths are utilized in simulating the forming process of square tubular component with hydroforming and the result of different loading path is presented. Among the result. the thickness distribution of bilinear loading path is the most uniform one. It shows that the increase of punch displacement in the stage of high pressure is beneficial to the forming of component for optimized Stress condition.
基金Supported by the Project of Tianjin Philosophy and Social Science Research(2-329)
文摘The problem of insufficient agricultural input has been restricting China's agricultural development. When the expansion of the use of capital has become a bottleneck restricting the agricultural development,the effective use of agricultural input resources will become an important way to increase agricultural input. Through building the value chain of interactive development between urban agriculture and other industries,it is expected to promote the reasonable allocation of resources,realize the conservation of resources and increase the efficiency of resource utilization,and promote the urban agricultural input to become an effective input. In this way,it can realize the transformation of agricultural development and the innovation of financing method of urban agriculture.
文摘In the paper presented, 99 single seed descent barley lines as well as their parental forms Roland and Apex were studied. The grain weight components and their interrelations were analyzed using simple coefficients of correlation. The direct and indirect effects of such components on grain weight per plant and 1 000-grain weight were estimated using path analysis. In the 2006 and 2007, the spike length and number of spikelets per spike were the determinants of grain weight. Genetic parameters as additive and epistasis effects were estimated for all studied traits. The results indicate the importance of both additive and epistasis gene effects of number of spikes per plant, grain weight per spike, grain number per plant and grain weight per plant in this study.
基金Project Supported by National Natural Science Foundation of China（50237010）.
文摘This paper investigates the development,the breakdown process,and the discharge path selection of the lightning discharges in two-phase mixtures(TPMs).13 kinds of solid-gas mixtures and 3 kinds of liquid-gas mixtures are employed to study effect of two phase mixtures on the selection of the discharge path under lightning impulses.Grain size effects are shown upon these experimental results.When the diameter of solid or liquid grains is less than about 10 μm,the discharge path does not select TPM but air.And the discharge path selects TPM when the diameter is greater than about 100 μm.And when the diameter is between about 10 μm and 100 μm,the discharge path selects TPM under negative lightning impulses,but it has a greater selection of air than TPMs under positive lightning impulses.Volume fraction and permittivity of solid/liquid can also influence the selection of the discharge path.
文摘This paper studies correlations between the spatial structure character of thermal forcing and deformation and the amplitude of rays of meridional wave train. It is shown that if thermal forcing appears a meridional linear variation the rays of quasi-stationary planetary wave may propagate along oblique lines and if the meridional variability of heat source has second order term the rays show distinct deformation as a great circular route. Additionally, the inhomogeneous distribution may cause lower frequency oscillations in mid- and low-latitudes. The combination of zonal and meridional wave numbers and distributive character of heat source may form an inverse mechanism of variational trend of generized wave energy, reflecting in some degree the physical process of transition between meridional and zonal flow patterns.
