A novel Effective Panicle Number per Plant 4 haplotype enhances grain yield by coordinating panicle number and grain number in rice

Increasing effective panicle number per plant(EPN)is one approach to increase yield potential in rice.However,molecular mechanisms underlying EPN remain unclear.In this study,we integrated mapbased cloning and genome-wide association analysis to identify the EPN4 gene,which is allelic to NARROW LEAF1(NAL1).Overexpression lines containing the Teqing allele(TQ)of EPN4 had significantly increased EPN.NIL-EPN4^(TQ) in japonica(geng)cultivar Lemont(LT)exhibited significantly improved EPN but decreased grain number and flag leaf size relative to LT.Haplotype analysis indicated that accessions with EPN4-1 had medium EPN,medium grain number,and medium grain weight,but had the highest grain yield among seven haplotypes,indicating that EPN4-1 is an elite haplotype of EPN4 for positive coordination of the three components of grain yield.Furthermore,accessions carrying the combination of EPN4-1 and haplotype GNP1-6 of GNP1 for grain number per panicle showed higher grain yield than those with other allele combinations.Therefore,pyramiding of EPN4-1 and GNP1-6 could be a preferred approach to obtain high yield potential in breeding.

A study on compatibility of experimental effective atomic numbers with those predicted by ZXCOM

In this study, effective atomic numbers(Zeff) of materials determined at different experimental conditions by measuring the elastic-to-inelastic γ-ray scattering ratios are compared to ZXCOM predictions. It also presents the experimental data obtained via the transmission technique The agreement and disagreement between ZXCOM and experimental values are investigated. The theoretical basics of determining Zeffby scattering mode are outlined. The study shows that choosing appropriate experimental conditions can provide a good compatibility between the experimental results and theoretical ZXCOM

Mapping of QTLs Controlling Panicle Length and Effective Panicle Number of Rice

Panicle length and effective panicle number of rice are closely related to yield. In this experiment, indica V20B as female parent was crossed with javanica CPSLO17 as male parent, recombinant inbred line （RIL） populations were obtained by single seed descent method, and with the RIL populations as mapping populations, QTL mapping and analysis were performed to the two panicle traits, panicle length and effective panicle. A high-density genetic map was constructed with SLAF labels, interval mapping was performed by software Map QTL5 under the threshold of 3.9, and 7 QTLs were detected on 3 chromosomes in total. Among the 7 QTLs, 5 QTLs controlling panicle length （qPLI-1, qPL1-2, qPL6-1, qPI_6-2 and qPL6-3） were located on chromosomes 1 and 6, respectively, and showed the contribution rates of 6.41%, 22.22%, 6.15%, 12.24% and 13.01%, respectively, their effect-increasing loci were mainly from CPSLO17, and qPL1-1 is a new QTL; and 2 QTLs controlling effective panicle number （qPN1 and qPN4） were located on chromosomes 1 and 4, respectively, and exhibited the contribution rates of 13.15% and 8.18%, respectively, and the effect-increasing loci were from parent V2OB. The marking of these loci lays a foundation for further cloning of genes controlling panicle length and effective panicle number and molecular marker-assisted selection.

Deformation and mutual influence of two cylindrical water columns in tandem subjected to shock wave

The interaction between shock waves and multiple cylinders,referred to as shock–cylinder interaction(SCI),is an important phenomenon in science and engineering.However,its underlying physical mechanisms remain unclear.This study entailed the numerical simulation of the aerobreakup of two tandem water columns subjected to a high-speed gas flow by using an adaptive mesh refinement(AMR)-based diffusion-interface model.The objective was to elucidate the changes in water–column deformation patterns over a wide range of Weber numbers.Statistical analysis was performed to examine the deformation of the water columns in vertical directions.Results reveal distinct deformation patterns between the two columns as the Weber number increases.Additionally,an extended exponential stretching law model was devised,and its improved capability to predict the deformation patterns was demonstrated.

The Effect of Some Effective Quantities to Electronic Stopping Power

The dependences of effective quantities Z＊, Zt,/＊, （effective number of electrons for ionization and for quasi-molecule, effective mean excitation energy） on the incident ion energy have been studied for a pervious stopping power calculation method, and Bohr stripping criterion and quasi-molecule criterion in this regard have been discussed in some details. The effect of effective quantities to the obtained stopping power results is investigated by calculating stopping powers. The contributions to stopping power from the modified LSS and Bethe formulas have been calculated separately and compared in graphs of stopping power. The stopping power for lithium ions in the intermediate and higher energy region is found to be dominant due to excitation-ionization whereas quasi molecule criterion is dominant in the lower energy region.

An Investigation into the Effects of the Reynolds Number on High-Speed Trains Using a Low Temperature Wind Tunnel Test Facility

A series of tests have been conducted using a Cryogenic Wind Tunnel to study the effect of Reynolds number(Re)on the aerodynamic force and surface pressure experienced by a high speed train.The test Reynolds number has been varied from 1 million to 10 million,which is the highest Reynolds number a wind tunnel has ever achieved for a train test.According to our results,the drag coefficient of the leading car decreases with higher Reynolds number for yaw angles up to 30º.The drag force coefficient drops about 0.06 when Re is raised from 1 million to 10 million.The side force is caused by the high pressure at the windward side and the low pressure generated by the vortex at the lee side.Both pressure distributions are not appreciably affected by Reynolds number changes at yaw angles up to 30°.The lift force coefficient increases with higher Re,though the change is small.At a yaw angle of zero the down force coefficient is reduced by a scale factor of about 0.03 when the Reynolds number is raised over the considered range.At higher yaw angles the lift force coefficient is reduced about 0.1.Similar to the side force coefficient,the rolling moment coefficient does not change much with Re.The magnitude of the pitching moment coefficient increases with higher Re.This indicates that the load on the front bogie is higher at higher Reynolds numbers.The yawing moment coefficient increases with Re.This effect is more evident at higher yaw angles.The yawing moment coefficient increases by about 6%when Re is raised from 1 million to 10 million.The influence of Re on the rolling moment coefficient around the leeward rail is relatively smaller.It increases by about 2%over the considered range of Re.

Mining Applicable Elite Alleles of Growth Duration, Plant Height and Panicle Number per Plant by Conditional QTL Mapping in Japonica Rice

Unconditional and conditional QTL mapping were conducted for growth duration (GD), plant height (PH) and effective panicle number per plant (PN) using a recombinant inbred line (RIL) population derived from a cross between two japonica rice varieties Xiushui 79 and C Bao. The RIL population consisted of 254 lines was planted in two environments, Nanjing and Sihong, Jiangsu Province, China. Results showed that additive effects were major in all of QTLs for GD, PH and PN detected by the two methods, and the epistatic effects explained a small proportion of phenotypic variation. No interactions were detected between additive QTL and environment, and between epistatic QTL pairs and environment. After growth duration was adjusted to an identical level, RM80-160bp was detected as an applicable elite allele for PN, with an additive effect of 0.71. When effective panicle number per plant was adjusted to an identical level, RM448-240bp was detected as an applicable elite allele for GD, with an additive effect of 4.64. After plant height was adjusted to an identical level, RM80-160bp was detected as an applicable elite allele for PN, with an additive effect of 0.62, and RM448-240bp was detected as an applicable elite allele for GD, with an additive effect of 3.89. These applicable elite alleles could be used to improve target traits without influencing the other two traits.

Effective Seed Distribution Pattern of an Upward Shift Species in Alpine Tundra of Changbai Mountains

The vegetation of alpine tundra in the Changbai Mountains has experienced great changes in recent decades. Narrowleaf small reed(Deyeuxia angustifolia), a perennial herb from the birch forest zone had crossed the tree line and invaded into the alpine tundra zone. To reveal the driven mechanism of D. angustifolia invasion, there is an urgent need to figure out the effective seed distribution pattern, which could tell us where the potential risk regions are and help us to interpret the invasion process. In this study, we focus on the locations of the seeds in the soil layer and mean to characterize the effective seed distribution pattern of D. angustifolia. The relationship between the environmental variables and the effective seed distribution pattern was also assessed by redundancy analysis. Results showed that seeds of D. angustifolia spread in the alpine tundra with a considerable number(mean value of 322 per m2). They were mainly distributed in the low elevation areas with no significant differences in different slope positions. Effective seed number(ESN) occurrences of D. angustifolia were different in various plant communities. Plant communities with lower canopy cover tended to have more seeds of D. angustifolia. Our research indicated reliable quantitative information on the extent to which habitats are susceptible to invasion.

Deliverability of wells in carbonate gas condensate reservoirs and the capillary number effect

With the development of the Tazhong No. 1 carbonate gas condensate reservoir in China, it has become more and more important to study the characteristics of gas condensate well deliverability. A single-well radial simulator for dual-permeability reservoirs was established to study the influences of fluid properties, permeability, and pressure drawdown on well deliverability with and without the capillary number effect. The simulation shows that well deliverability basically maintains its initial value and is not affected by the capillary number when the formation pressure is higher than dew-point pressure. However, well deliverability drops rapidly when the formation pressure is lower than dew-point pressure. Even if the condensate dropout is very low, well deliverability without the capillary number effect reduces to 50 percent of its initial value when reservoir pressure declines to 95 percent of dew-point pressure, but well deliverability is significantly improved if the capillary number effect exists. The capillary number effect is most significant when reservoir pressure is just lower than dew point pressure, then the effect decreases; the reduction of well deliverability is mainly caused by the reduction of gas relative permeability of the matrix system near the wellbore.

Effects of the Reynolds number on a scale-similarity model of Lagrangian velocity correlations in isotropic turbulent flows

A scale-similarity model of a two-point two-time Lagrangian velocity correlation(LVC) was originally developed for the relative dispersion of tracer particles in isotropic turbulent flows(HE, G. W., JIN, G. D., and ZHAO, X. Scale-similarity model for Lagrangian velocity correlations in isotropic and stationary turbulence. Physical Review E, 80, 066313(2009)). The model can be expressed as a two-point Eulerian space correlation and the dispersion velocity V. The dispersion velocity denotes the rate at which one moving particle departs from another fixed particle. This paper numerically validates the robustness of the scale-similarity model at high Taylor micro-scale Reynolds numbers up to 373, which are much higher than the original values(R_λ = 66, 102). The effect of the Reynolds number on the dispersion velocity in the scale-similarity model is carefully investigated. The results show that the scale-similarity model is more accurate at higher Reynolds numbers because the two-point Lagrangian velocity correlations with different initial spatial separations collapse into a universal form compared with a combination of the initial separation and the temporal separation via the dispersion velocity.Moreover, the dispersion velocity V normalized by the Kolmogorov velocity V_η ≡ η/τ_η in which η and τ_η are the Kolmogorov space and time scales, respectively, scales with the Reynolds number R_λ as V/V_η ∝ R_λ^(1.39) obtained from the numerical data.

Dimensionality and Finite Number Effect on BCS Transition of Atomic Fermi Gas

The effect of finite number and dimensionality has been discussed in thispaper. The finite number effect has a negative correction to final temperature for 2D or 3D atomicFermi gases. The changing of final temperature obtained by scanning from BEC region to BCS regionare 10% or so with N ≤ 10~3 and can be negligible when N 】 10~3. However, in ID atomic Fermi gas,the effect gives a positive correction which greatly changes the final temperature in Fermi gas.This behavior is completely opposed to the 2D and 3D cases and a proper explanation is still to befound. Dimensionality also has a positive correction, in which the more tightly trapping, the higherfinal temperature one gets with the same particle number. A discussion is also presented.

Experimental Investigation of Reynolds Number Effect on Wind Turbine Profiles in the Cryogenic Wind Tunnel Cologne DNW-KKK

Wind turbine size has increased continuously and correspondingly also its Reynolds numbers. The Reynolds number effect can therefore no longer be ignored in design and optimization of wind turbines. Reliable profile test data should be available. A suitable facility for testing wind turbine profiles at high Reynolds numbers is the Cryogenic Wind Tunnel Cologne DNW-KKK. By means of injecting liquid nitrogen the tunnel can be cooled down to 100 K and the Reynolds number therefore can be raised accordingly. The maximum Reynolds number for 2D profile tests can reach 27x10^6. In this paper the test uncertainty and the flow quality of DNW-KKK were analyzed. Then some test results on the Reynolds number effect of the wind turbine profiles will be presented. The Reynolds number effect is different from model to model. Especially for thick profiles and flow control devices the Reynolds number effect is not always like the description in literature.

Brightness of Blue/Violet Luminescent Nano-Crystalline AZO and IZO Thin Films with Effect of Layer Number:For High Optical Performance

From different reports, it （AZO） and indium-doped including usage areas. We nanocrystalline films with is realized that there is a need to consider all sides of aluminum-doped zinc oxide zinc oxide （IZO） thin films with their optical, luminescence and surface properties establish an assessment to carry out further information to summarize AZO and IZO impact of the layer number.

Effect of Particle Number Density on Wave Dispersion in a Two-Dimensional Yukawa System

Effect of the particle number density on the dispersion properties of longitudinal and transverse lattice waves in a two-dimensional Yukawa charged-dust system is investigated using molecular dynamics simulation. The dispersion relations for the waves are obtained. It is found that the frequencies of both the longitudinal and transverse dust waves increase with the density and when the density is sufficiently high a cutoff region appears at the short wavelength. With the increase of the particle number density, the common frequency tends to increase, and the sound speed of the longitudinal wave also increases, but that of the transverse wave remains low.

Effect of Green Quantum Well Number on Properties of Green GaN-Based Light-Emitting Diodes

In GaN-based green light-emitting diodes（LEDs） with different green quantum well numbers grown on Si（111）substrates by metal organic chemical vapor deposition are investigated. It is observed that V-shaped pits appear in the AFM images with the green quantum well number increasing from 5 to 9, and results in larger reverse-bias leakage current. Meanwhile, in the case of the sample with the number from 5 to 7 then to 9, the external quantum efficiency increases firstly, and then decreases. These phenomena may be related to the size of V-shaped pits in the active area and the distribution of electrons and holes in the active area caused by V-shaped pits. The optimal number of green quantum wells is determined to be 7.

Quantitative parameters in novel spectral computed tomography:Assessment of Ki-67 expression in patients with gastric adenocarcinoma

BACKGROUND The level of Ki-67 expression has served as a prognostic factor in gastric cancer.The quantitative parameters based on the novel dual-layer spectral detector computed tomography(DLSDCT)in discriminating the Ki-67 expression status are unclear.AIM To investigate the diagnostic ability of DLSDCT-derived parameters for Ki-67 expression status in gastric carcinoma(GC).METHODS Dual-phase enhanced abdominal DLSDCT was performed preoperatively in 108 patients with gastric adenocarcinoma.Primary tumor monoenergetic CT attenuation value at 40-100 kilo electron volt(kev),the slope of the spectral curve(λ_(HU)),iodine concentration(IC),normalized IC(nIC),effective atomic number(Z^(eff))and normalized Z^(eff)(nZ^(eff))in the arterial phase(AP)and venous phase(VP)were retrospectively compared between patients with low and high Ki-67 expression in gastric adenocarcinoma.Spearman’s correlation coefficient was used to analyze the association between the above parameters and Ki-67 expression status.Receiver operating characteristic(ROC)curve analysis was performed to compare the diagnostic efficacy of the statistically significant parameters between two groups.RESULTS Thirty-seven and 71 patients were classified as having low and high Ki-67 expression,respectively.CT_(40 kev-VP),CT_(70 kev-VP),CT_(100 kev-VP),and Z^(eff)-related parameters were significantly higher,but IC-related parameters were lower in the group with low Ki-67 expression status than the group with high Ki-67 expression status,and other analyzed parameters showed no statistical difference between the two groups.Spearman’s correlation analysis showed that CT_(40 kev-VP),CT_(70 kev-VP),CT_(100 kev-VP),Z^(eff),and n Z^(eff) exhibited a negative correlation with Ki-67 status,whereas IC and nIC had positive correlation with Ki-67 status.The ROC analysis demonstrated that the multi-variable model of spectral parameters performed well in identifying the Ki-67 status[area under the curve(AUC)=0.967;sensitivity 95.77%;specificity 91.89%)].Nevertheless,the differentiating capabilities of singlevariable model were moderate(AUC value 0.630-0.835).In addition,the nZ_(VP)^(eff) and nIC_(VP)(AUC 0.835 and 0.805)showed better performance than CT_(40 kev-VP),CT_(70 kev-VP) and CT_(100 kev-VP)(AUC 0.630,0.631 and 0.662)in discriminating the Ki-67 status.CONCLUSION Quantitative spectral parameters are feasible to distinguish low and high Ki-67 expression in gastric adenocarcinoma.Z^(eff) and IC may be useful parameters for evaluating the Ki-67 expression.

Full-Scale Numerical Simulation of the Local Scour Under Combined Current and Wave Conditions Based on Field Data

The monopile is the most common foundation to support offshore wind turbines.In the marine environment,local scour due to combined currents and waves is a significant issue that must be considered in the design of wind turbine foundations.In this paper,a full-scale numerical model was developed and validated based on field data from Rudong,China.The scour development around monopiles was investigated,and the effects of waves and the Reynolds number Re were analyzed.Several formulas for predicting the scour depth in the literature have been evaluated.It is found that waves can accelerate scour development even if the KC number is small(0.78<KC<1.57).The formula obtained from small-scale model tests may be unsafe or wasteful when it is applied in practical design due to the scale effect.A new equation for predicting the scour depth based on the average pile Reynolds number(Rea)is proposed and validated with field data.The equilibrium scour depth predicted using the proposed equation is evaluated and compared with those from nine equations in the literature.It is demonstrated that the values predicted from the proposed equation and from the S/M(Sheppard/Melville)equation are closer to the field data.

Estimating effective reproduction number revisited

Accurately estimating the effective reproduction number is crucial for characterizing the transmissibility of infectious diseases to optimize interventions and responses during epidemic outbreaks.In this study,we improve the estimation of the effective reproduction number through two main approaches.First,we derive a discrete model to represent a time series of case counts and propose an estimation method based on this framework.We also conduct numerical experiments to demonstrate the effectiveness of the proposed discretization scheme.By doing so,we enhance the accuracy of approximating the underlying epidemic process compared to previous methods,even when the counting period is similar to the mean generation time of an infectious disease.Second,we employ a negative binomial distribution to model the variability of count data to accommodate overdispersion.Specifically,given that observed incidence counts follow a negative binomial distribution,the posterior distribution of secondary infections is obtained as a Dirichlet multinomial distribution.With this formulation,we establish posterior uncertainty bounds for the effective reproduction number.Finally,we demonstrate the effectiveness of the proposed method using incidence data from the COVID-19 pandemic.

Study on Polymorphisms in the Blood Protein of Tibetan Mastiff

[ Objective] The aim was to study the protein polymorphism in the blood of Tibetan Mastiff, and provide some theoretical basis for resource protection and reasonable development and utilization of Tibetan Mastiff varieties. [ Method] A total of 103 blood samples were taken from four populations of Hequ Tibetan Mastiff, Qinhai Tibetan Mastiff, Tibetan Spaniel and native dogs of Qinghai. Seven blood protein Iocus（Tf, Po, Sα2, Hb, AIb, Pr and Amy）were investigated by using vertical polyacrylamide gel electrophoresis with discontinuous buffer system. Then the genetic variation during different populations was analyzed. [ Result] Genetic variations were observed in Tf, Sα2 and Po in four populations, others were not polymorphic. There were three alleles at the locus of Tf and Po, two alleles at the loci of Sα2. Effective number of alleles and Nei＇s average expected heterozygosity were 1. 532 4 and 0.230 3 relatively, all higher in Tibetan Mastiff than other populations. [ Conclusion] Protein locus in blood of Tibetan Mastiff existed in genetic variation.

Analysis of Influencing Factors on Yield of Seven Wheat Cultivars in Anhui Province

[Objective] The objective of this paper was to screen out suitable high- yielding cultivars and to understand the current yield performance of wheat in Anhui Province. In addition, the influencing factors on wheat yield were discussed to es- tablish suitable cultural practice. [Method] Main popularized cultivars and some new strains of wheat were selected as matedals and planted in the Funan Farm and Longkang Farm in 2009-2011. The yield stability and influencing factors on yield of wheat were discussed. [Resalt] In Anhui Province, the weather had a great influence on wheat yield, resulting in significant differences in wheat yield among different years. Drought was the main factor restricting the yield. [Conclusion] （1） It was easy to achieve high yield when the three influencing factors on wheat yield were coordi- nated. （2） The occurred drought disaster in 20tl was the main factor limiting the 1 000- grain weight and final yield of wheat. （3） Different cultivars showed different yield stabilities. Among the test wheat cultivars, two cultivars （Wanke 06290 and Yannong 19） showed good yield stability, while Xinfumai No.1 showed higher yield. （4） The three influencing factors played different roles in different cultivars. In the promotion process, the characteristics of wheat cultivars should be fully understood. To achieve high yield, integrating cultural practices is a necessity.