Evaluation of the Effectiveness and Efficiency of Extracorporeal Shock Wave Combined with Rehabilitation Training in the Treatment of Muscle Articulation Chronic Pain

Objective: To analyze the effect of combined extracorporeal shock wave and rehabilitation training treatment in patients with muscle articulation chronic pain (MACP). Methods: Ninety-seven MACP patients admitted to our hospital from September 2021 to September 2023 were randomly selected and were divided into Group A (control group, 46 cases, rehabilitation training treatment) and Group B (observation group, 51 cases, extracorporeal shock wave with rehabilitation training treatment), and outcomes of the two groups were compared. Results: The treatment efficiency, post-treatment clinical indexes (upper and lower limb function scores, activities of daily living (ADL) scores, visual analog scale (VAS) scores), and short-form 36 (SF-36) scores of Group B were better than those of Group A (P < 0.05). Conclusion: Combined extracorporeal shock wave and rehabilitation training treatment for MACP patients improved their limb function, daily activities, quality of life, and reduced pain.

Laboratory Research on Effective Test Area of Short-Crested Waves Generated by Two-Sided Segmented Wavemakers

The size and shape of the effective test area are crucial to consider when short-crested waves are created by segmented wavemakers. The range of the effective test area of short-crested waves simulated by two-sided segmented wavemakers is analyzed in this paper. The experimental investigation on the wave field distribution of short-crested waves generated by two-sided segmented wavemakers is conducted by using an array of wave gauges. Wave spectra and directional spreading function are analyzed and the results show that when the main direction is at a certain angle with the normal line of wave generators, the wave field of 3D short-crested waves generated by two-sided segmented wavemakers has good spatial uniformity within the model test area. The effective test area can provide good wave environments for seakeeping model tests of various ocean engineering structures in the deep ocean engineering basin.

Effective wave identification and interference analysis of the seismic reflection method in mines

Through discussion of the time-distance curve characteristics of the direct waveand from the front,side and rear of the reflection waves of the seismic reflection methodfor advanced exploration in mines,and analysis of several major interference waves inmines,the differences in time-distance curve,frequency,apparent velocity between theeffective wave and interference wave in the seismic reflection method for advanced explorationare obtained.According to the differences,the effective wave is extracted andthe interference wave is filtered and the system's precision and accuracy is improved.

Propagation Dynamics of Forced Pulsating Waves for a Time Periodic Lotka-Volterra Cooperative System with Nonlocal Effects in Shifting Habitats

In this paper, we will concern the existence, asymptotic behaviors and stability of forced pulsating waves for a Lotka-Volterra cooperative system with nonlocal effects under shifting habitats. By using the alternatively-coupling upper-lower solution method, we establish the existence of forced pulsating waves, as long as the shifting speed falls in a finite interval where the endpoints are obtained from KPP-Fisher speeds. The asymptotic behaviors of the forced pulsating waves are derived. Finally, with proper initial, the stability of the forced pulsating waves is studied by the squeezing technique based on the comparison principle.

Enhancement of the Electromagnetic Wave Shielding Effectiveness by Geometry-Controlled Carbon Coils

Carbon microcoils were deposited onto Al2O3 substrates using C2H2/H2 as source gases and SF6 as an incorporated additive gas in a thermal chemical vapor deposition system. At as-grown state, the carbon coils (d-CCs) show the diverse geometry. The geometry-controlled carbon microcoils (g-CMCs) could be obtained by manipulating the injection time of SF6 in C2H2 source gas. The d-CCs with polyurethane (PU) composite (d-CC@PU) and the g-CMCs with PU composite (g-CMC@PU) were obtained by dispersing d-CCs and g-CMCs in PU, respectively. The electromagnetic wave shielding properties of d-CC@PU and g-CMC@PU composites were investigated in the frequency range of 0.25 - 4.0 GHz. The shielding effectiveness (SE) of d-CC@PU and g-CMC@PU composites were measured and discussed according to the weight percent of d-CCs and g-CMCs in the composites with the thickness of the composites layers. On the whole frequency range in this work, the SE of g-CMC@PU composites was higher than those of d-CC@PU composites, irrespective of the weight percent of carbon coils in the composites and the layer thickness. Furthermore, we confirmed that the absorption mechanism, instead of the reflection mechanism, seemed to play the critical role to shield the EMI for not only the g-CMC@PU composites but also the d-CC@PU composites.

Experimental, Numerical and Simplified Theoretical Model Study for Internal Solitary Wave Load on FPSO with Emphasis on Scale Effect

Scale effect of ISWs loads on Floating Production Storage and Offloading(FPSO) is studied in this paper. The application conditions of KdV, eKdV and MCC ISWs theories are used in the numerical method. The depthaveraged velocities induced by ISWs are used for the velocity-inlet boundary. Three scale ratio numerical models λ=1, 20 and 300 were selected, which the scale ratio is the size ratio of numerical models to the experimental model.The comparisons between the numerical and former experimental results are performed to verify the feasibility of numerical method. The comparisons between the numerical and simplified theoretical results are performed to discuss the applicability of the simplified theoretical model summarized from the load experiments. Firstly, the numerical results of λ=1 numerical model showed a good agreement with former experimental and simplified theoretical results. It is feasible to simulate the ISWs loads on FPSO by the numerical method. Secondly, the comparisons between the results of three scale ratio numerical models and experimental results indicated that the scale ratios have more significant influence on the experimental horizontal forces than the vertical forces. The scale effect of horizontal forces mainly results from the different viscosity effects associated with the model’s dimension.Finally, through the comparisons between the numerical and simplified theoretical results for three scale ratio models, the simplified theoretical model of the pressure difference and friction forces exerted by ISWs on FPSO is applied for large-scale or full-scale FPSO.

The Propagation and Transport Effect of Planetary Waves in the Northern Hemisphere Winter

Based on the transformed Eulerian-mean equations, the dynamics of planetary waves are discussed. Both observations and simulations indicate that in the Northern Hemisphere winter there are two waveguides for the meridional propagation of quasi-stationary planetary waves. One is the high latitude waveguide, and the other is the low latitude waveguide. These results are in good agreement with theoretical analysis. Moreover, the convergence of EP flux indicates that the stratospheric sudden warming is the result of anomalous planetary wave propagation along the high latitude waveguide and its interaction with mean flows. The tropical quasi-biennial oscillation (QBO) winds, which represent one significant variation of zonal flow in the lower stratosphere at low latitudes, can influence the low latitude waveguide of planetary wave propagation. Our results of the wave-mean flow coupled model show that these tropical winds can also modulate the high latitude waveguide significantly in the case of wave-mean flow interaction.The transport effect of planetary waves on ozone is also analyzed. The residual mean circulation forced by planetary waves indicates that there is strong transport circulation for the dissipative planetary waves. Under the forcing of northward eddy heat transport, a positive transport circulation can result which rises at low latitudes and sinks at high latitudes. At the same time, the modification of planetary wave propagation by the equatorial QBO winds is shown to have an important impact on the transport circulation. The model results indicate that the meridional transport is amplified during the easterly phase of the QBO. This mechanism may explain the interannual variability of ozone in the stratosphere at high latitudes.

An analytical solution to the scattering of cylindrical SH waves by a partially filled semi-circular alluvial valley: near-source site effects

The earth’s surface irregularities can substantially affect seismic waves and induce amplifi cations of ground motions. This study investigates whether and how the source characteristics affect the site amplifi cation effects. An analytical model of a line source of cylindrical waves impinging on an alluvial valley is proposed to link the source and site. The analytical solution to this problem proves one aspect of the strong effect of source on site amplifi cation, i.e., the wave curvature effect. It is found that the site amplifi cation depends on the source location, especially under conditions of a small source-to-site distance. Whether the displacement is amplifi ed or reduced and the size of the amplifi cation or reduction may be determined by the location of the source. It is suggested that traditional studies of site responses, which usually ignore the source effect, should be further improved by combining the source with site effects.

Modified KdV equation for solitary Rossby waves with β effect in barotropic fluids

This paper uses the weakly nonlinear method and perturbation method to deal with the quasi-geostrophic vorticity equation,and the modified Korteweg-de Vries（mKdV） equations describing the evolution of the amplitude of solitary Rossby waves as the change of Rossby parameter β（у） with latitude у is obtained.

Traveling wave effect on the seismic response of a steel arch bridge subjected to near fault ground motions

In the 1990s, several major earthquakes occurred throughout the world, with a common observation that near fault ground motion （NFGM） characteristics had a distinct impact on causing damage to civil engineering structures that could not be predicted by using far field ground motions. Since then, seismic responses of structures under NFGMs have been extensively examined, with most of the studies focusing on structures with relatively short fundamental periods, where the traveling wave effect does not need to be considered. However, for long span bridges, especially arch bridges, the traveling wave （only time delay considered） effect may be very distinct and is therefore important. In this paper, the results from a case study on the seismic response of a steel arch bridge under selected NFGMs is presented by considering the traveling wave effect with variable apparent velocities. The effects of fling step and long period pulses of NFGMs on the seismic responses of the arch bridge are also discussed.

Viscous Effects on Wave Forces on A Submerged Horizontal Circular Cylinder

Numerical simulations are carried out for wave action on a submerged horizontal circular cylinder by means of a viscous fluid model, and it is focused on the examination of the discrepancies between the viscous fluid results and the potential flow solutions. It is found that the lift force resulted from rotational flow on the circular cylinder is always in anti-phase with the inertia force and induces the discrepancies between the results. The influence factors on the magnitude of the lift force, especially the correlation between the stagnation-point position and the wave amplitude, and the effect of the vortex shedding are investigated by further examination on the flow fields around the cylinder. The viscous numerical calculations at different wave frequencies showed that the wave frequency has also significant influence on the wave forces. Under higher frequency and larger amplitude wave action, vortex shedding from the circular cylinder will appear and influence the wave forces on the cylinder substantially.

Surface effect and non-local elasticity in wave propagation of functionally graded piezoelectric nano-rod excited to applied voltage

A non-local solution for a functionally graded piezoelectric nano-rod is pre- sented by accounting the surface effect. This solution is used to evaluate the charac- teristics of the wave propagation in the rod structure. The model is loaded under a two-dimensional （2D） electric potential and an initially applied voltage at the top of the rod. The mechanical and electrical properties are assumed to be variable along the thick- ness direction of the rod according to the power law. The Hamilton principle is used to derive the governing differential equations of the electromechanical system. The effects of some important parameters such as the applied voltage and gradation of the material properties on the wave characteristics of the rod are studied.

Mesh Size Effect in Numerical Simulation of Blast Wave Propagation and Interaction with Structures

Numerical method is popular in analysing the blast wave propagation and interaction with structures.However,because of the extremely short duration of blast wave and energy trans-mission between different grids,the numerical results are sensitive to the finite element mesh size.Previous numerical simulations show that a mesh size acceptable to one blast scenario might not be proper for another case,even though the difference between the two scenarios is very small,indicating a simple numerical mesh size convergence test might not be enough to guarantee accu-rate numerical results.Therefore,both coarse mesh and fine mesh were used in different blast scenarios to investigate the mesh size effect on numerical results of blast wave propagation and interaction with structures.Based on the numerical results and their comparison with field test re-sults and the design charts in TM5-1300,a numerical modification method was proposed to correct the influence of the mesh size on the simulated results.It can be easily used to improve the accu-racy of the numerical results of blast wave propagation and blast loads on structures.

Geometrical Evaluation on the Viscous Effect of Point-Absorber Wave-Energy Converters

The fluid viscosity is known to have a significant effect on the hydrodynamic characteristics which are linked to the power conversion ability of the wave energy converter(WEC). To overcome the disadvantages of case-by-case study through the experiments and numerical computations employed by the former researches, the viscous effect is studied comprehensively for multiple geometries in the present paper. The viscous effect is expressed as the viscous added mass and damping solved by the free-decay method. The computational fluid dynamics(CFD) method is employed for the calculation of the motion and flow field around the floater. The diameter to draft ratio and bottom shape are considered for the geometrical evaluation on the viscous effect. The results show that a slenderer floater presents a stronger viscous effect. Through the comparisons of the floaters with four different bottom shapes, the conical bottom is recommended in terms of low viscous effect and simple geometry for manufacture. A viscous correction formula for a series of cylindrical floaters is put forward, for the first time, to help the engineering design of outer-floaters of point-absorber WECs.

Prediction of the dynamic effective properties of particle-reinforced composite materials

The prediction behaviors of some coherent plane wave equations for the effective velocities and attenuations of the coherent plane waves propagating through a composite material and for the effective elastic moduli of the composites are studied. The numerical results obtained by Waterman & Truell's, Twersky's and Gubernatis's equations for Glass-Epoxy composites with various volume fractions are compared. It is found that the predictions by both Twersky's and Gubernatis's equations underestimate the effective velocities and the effective elastic moduli when compare with the predictions by Waterman & Truell's equation. Furthermore, the deviations are more evident for the shear wave than that for the longitudinal wave. But these deviations decrease gradually with the increase of the frequency and increase gradually with the increase of the volume fraction.

Research progress in the effects of terahertz waves on biomacromolecules

With the rapid development of terahertz technologies,basic research and applications of terahertz waves in biomedicine have attracted increasing attention.The rotation and vibrational energy levels of biomacromolecules fall in the energy range of terahertz waves;thus,terahertz waves might interact with biomacromolecules.Therefore,terahertz waves have been widely applied to explore features of the terahertz spectrum of biomacromolecules.However,the effects of terahertz waves on biomacromolecules are largely unexplored.Although some progress has been reported,there are still numerous technical barriers to clarifying the relation between terahertz waves and biomacromolecules and to realizing the accurate regulation of biological macromolecules by terahertz waves.Therefore,further investigations should be conducted in the future.In this paper,we reviewed terahertz waves and their biomedical research advantages,applications of terahertz waves on biomacromolecules and the effects of terahertz waves on biomacromolecules.These findings will provide novel ideas and methods for the research and application of terahertz waves in the biomedical field.

Influence of air pressure on mechanical effect of laser plasma shock wave

The influence of air pressure on mechanical effect of laser plasma shock wave in a vacuum chamber produced by a Nd：YAG laser has been studied. The laser pulses with pulse width of 10ns and pulse energy of about 320mJ at 1.06μm wavelength is focused on the aluminium target mounted on a ballistic pendulum, and the air pressure in the chamber changes from 2.8 × 10^ 3 to 1.01 × 10^5pa. The experimental results show that the impulse coupling coefficient changes as the air pressure and the distance of the target from focus change. The mechanical effects of the plasma shock wave on the target are analysed at different distances from focus and the air pressure.

Influences of interphase on dynamic effective properties of composites reinforced by dispersed spherical particles

The influences of interphase on dynamic effective properties of composites reinforced by randomly dispersed spherical particles were studied. A thin homogeneous elastic interphase with different shear and bulk moduli, located between the reinforced particle and the host matrix, was introduced to model the interfacial bonding state. The effects of such an interphase on the coherent plane waves were studied numerically. Numerical simulations were carried out for SiC-Al composites with four typical cases of interphase. It was found that the property of interphase has significant influences on the effective propagation constants of coherent waves and the dynamic effective elastic moduli of the composites. The influences on the coherent longitudinal wave and the coherent shear waves were different and dependent upon the frequency range. Moreover, several imperfect interface models, i.e., the spring model, mass model, and spring-mass model, were studied numerically and compared with the interphase model, It was found that the spring model is a more suitable model than the mass model for the light and weak interphase whereas the mass model is a more suitable model than the spring model for the heavy and strong interphase.

Wall Effect of Underwater Explosion Load Based on Wave Motion Theories

Owing to the existence of the flow field boundary, the shock wave load near the boundary is different from the freefield shock wave load. In the present paper, the hull plate load subjected to underwater shock wave is investigated based onwave motion theories; in addition, the experimental study of the hull plate load is carried out. According to the theoreticalanalysis of the hull plate pressure, we find that the hull plate pressure oscillates repeatedly and decays rapidly with timepassing, the maximum hull plate pressure is 2/（1＋n） times the maximum free field pressure, where n is the ratio ofimpedance, and the impulse is much smaller than the free field impulse. Compared with the experimental study, thetheoretical results agree well with the experimental data.

Density waves in a lattice hydrodynamic traffic flow model with the anticipation effect

By introducing the traffic anticipation effect in the real world into the original lattice hydrodynamic model, we present a new anticipation effect lattice hydrodynamic （AELH） model, and obtain the linear stability condition of the model by applying the linear stability theory. Through nonlinear analysis, we derive the Burgers equation and Korteweg-de Vries （KdV） equation, to describe the propagating behaviour of traffic density waves in the stable and the metastable regions, respectively. The good agreement between simulation results and analytical results shows that the stability of traffic flow can be enhanced when the anticipation effect is considered.