锂离子电池高镍Li Ni_(x)Co_(y)Mn_(1-x-y)O_(2)(NCM,x≥0.6)正极材料因具有较高的能量密度和低成本等优势在电池领域备受关注,然而随着镍含量的升高,材料锂镍混排严重且热稳定性下降,导致高镍三元材料的循环稳定性和安全性恶化。本研...锂离子电池高镍Li Ni_(x)Co_(y)Mn_(1-x-y)O_(2)(NCM,x≥0.6)正极材料因具有较高的能量密度和低成本等优势在电池领域备受关注,然而随着镍含量的升高,材料锂镍混排严重且热稳定性下降,导致高镍三元材料的循环稳定性和安全性恶化。本研究针对高镍三元材料阳离子无序排列严重和循环稳定性差的问题,通过共沉淀法在前驱体合成过程中将Mg掺杂进入晶体,得到Li Ni_(0.8)Co_(0.1)Mn_(0.09)Mg_(0.01)O_(2)(Mg1.0)活性材料,进一步利用液相法在材料表面包覆Al_(2)O_(3),成功制备Al_(2)O_(3)涂覆的Li Ni_(0.8)Co_(0.1)Mn_(0.09)Mg_(0.01)O_(2)复合材料(Mg1.0@Al)。X射线衍射(XRD)结果表明,Mg掺杂能够有效扩大材料层间距,抑制阳离子混排;扫描电子显微镜(SEM)结合透射电子显微镜(TEM)结果表明,改性未对NCM811材料整体形貌造成影响,同时能够明显地观察到通过液相法在材料表面包覆的Al_(2)O_(3)涂层。电化学测试结果表明,镁铝协同改性可以稳定NCM811材料结构,减少阴极的界面极化,遏制材料与电解液发生副反应,使得材料表现出优越的电化学性能。Mg1.0@Al在1 C循环100次后表现出稳定的放电电压(ΔV=5.2 m V)、较低的电荷转移阻抗(R_(ct)=51.66Ω)和卓越的锂离子扩散系数(D_(Li)=4.05×10^(-14)cm^(2)/s)。同时,Mg1.0@Al材料在2.8~4.3V电压范围下,展现出卓越的循环性能和倍率性能:1 C下循环100次和400次后仍有188.58 m Ah/g和147.47 m Ah/g的放电比容量,容量保持率分别为95.18%和74.54%;5 C大倍率电流下,放电比容量高达146.3 m Ah/g。展开更多
A superior Ce-Ta-Sb composite oxide catalyst prepared using homogeneous precipitation method exhibited excellent deNOx efficiency and nearly 100% Nselectivity with broad operation temperature window and better resista...A superior Ce-Ta-Sb composite oxide catalyst prepared using homogeneous precipitation method exhibited excellent deNOx efficiency and nearly 100% Nselectivity with broad operation temperature window and better resistance to higher space velocity, meanwhile strong resistance to HO and SO. This catalyst was systematically characterized using XRD, Nadsorption, SEM, TEM, XPS, ESR, Raman, H-TPR,NH3-TPD and in situ DRIFTS. There exists a synergistic effect between Ce, Ta and Sb species. It is further indicated that the prominent deNOx performance of the Ce3 Ta3 SbOx catalyst is attributed to the elevated Ce3+ concentrations, abundant active surface oxygen species, as well as surface acidity and reducibility,which is closely linked with the synergistic effect between Ce, Sb and Ta species. Results from DRIFTS reveal that the reaction mechanism of surface-adsorbed NH3 and NOspecies is linked to temperature,the L-H mechanism mainly occurs at low temperature(<300 ℃),while the E-R mechanism occurs at high temperature(>300 ℃). Overall,these findings indicate that Ce3 Ta3 SbOx is promising for NOpractical abatement.展开更多
文摘锂离子电池高镍Li Ni_(x)Co_(y)Mn_(1-x-y)O_(2)(NCM,x≥0.6)正极材料因具有较高的能量密度和低成本等优势在电池领域备受关注,然而随着镍含量的升高,材料锂镍混排严重且热稳定性下降,导致高镍三元材料的循环稳定性和安全性恶化。本研究针对高镍三元材料阳离子无序排列严重和循环稳定性差的问题,通过共沉淀法在前驱体合成过程中将Mg掺杂进入晶体,得到Li Ni_(0.8)Co_(0.1)Mn_(0.09)Mg_(0.01)O_(2)(Mg1.0)活性材料,进一步利用液相法在材料表面包覆Al_(2)O_(3),成功制备Al_(2)O_(3)涂覆的Li Ni_(0.8)Co_(0.1)Mn_(0.09)Mg_(0.01)O_(2)复合材料(Mg1.0@Al)。X射线衍射(XRD)结果表明,Mg掺杂能够有效扩大材料层间距,抑制阳离子混排;扫描电子显微镜(SEM)结合透射电子显微镜(TEM)结果表明,改性未对NCM811材料整体形貌造成影响,同时能够明显地观察到通过液相法在材料表面包覆的Al_(2)O_(3)涂层。电化学测试结果表明,镁铝协同改性可以稳定NCM811材料结构,减少阴极的界面极化,遏制材料与电解液发生副反应,使得材料表现出优越的电化学性能。Mg1.0@Al在1 C循环100次后表现出稳定的放电电压(ΔV=5.2 m V)、较低的电荷转移阻抗(R_(ct)=51.66Ω)和卓越的锂离子扩散系数(D_(Li)=4.05×10^(-14)cm^(2)/s)。同时,Mg1.0@Al材料在2.8~4.3V电压范围下,展现出卓越的循环性能和倍率性能:1 C下循环100次和400次后仍有188.58 m Ah/g和147.47 m Ah/g的放电比容量,容量保持率分别为95.18%和74.54%;5 C大倍率电流下,放电比容量高达146.3 m Ah/g。
基金supported by the National Natural Science Foundation of China(11572292)
文摘A superior Ce-Ta-Sb composite oxide catalyst prepared using homogeneous precipitation method exhibited excellent deNOx efficiency and nearly 100% Nselectivity with broad operation temperature window and better resistance to higher space velocity, meanwhile strong resistance to HO and SO. This catalyst was systematically characterized using XRD, Nadsorption, SEM, TEM, XPS, ESR, Raman, H-TPR,NH3-TPD and in situ DRIFTS. There exists a synergistic effect between Ce, Ta and Sb species. It is further indicated that the prominent deNOx performance of the Ce3 Ta3 SbOx catalyst is attributed to the elevated Ce3+ concentrations, abundant active surface oxygen species, as well as surface acidity and reducibility,which is closely linked with the synergistic effect between Ce, Sb and Ta species. Results from DRIFTS reveal that the reaction mechanism of surface-adsorbed NH3 and NOspecies is linked to temperature,the L-H mechanism mainly occurs at low temperature(<300 ℃),while the E-R mechanism occurs at high temperature(>300 ℃). Overall,these findings indicate that Ce3 Ta3 SbOx is promising for NOpractical abatement.
