This study delves into the intricate relationship between iron(Fe)content in kaolinite and its impact on the adsorption behavior of sodium oleate.The effects of different iron concentrations on adsorption energy,hydro...This study delves into the intricate relationship between iron(Fe)content in kaolinite and its impact on the adsorption behavior of sodium oleate.The effects of different iron concentrations on adsorption energy,hydrogen bond kinetics and adsorption efficiency were studied through simulation and experimental verification.The results show that the presence of iron in the kaolinite structure significantly improves the adsorption capacity of sodium oleate.Kaolinite samples with high iron content have better adsorption properties,lower adsorption energy levels and shorter and stronger hydrogen bonds than pure kaolinite.The optimal concentration of oleic acid ions for achieving maximum adsorption efficiency was identified as 1.2 mmol/L across different kaolinite samples.At this concentration,the adsorption rates and capacities reach their peak,with Fe-enriched kaolinite samples exhibiting notably higher flotation recovery rates.This optimal concentration represents a balance between sufficient oleic acid ion availability for surface interactions and the prevention of self-aggregation phenomena that could hinder adsorption.This study offers promising avenues for optimizing the flotation process in mineral processing applications.展开更多
A new visual method for quantitative measurement of frothers effect and flotation efficiency was presented. A self-designed electrolytic cell was chosen as the reaction environment with sodium chloride (NaCl) as the e...A new visual method for quantitative measurement of frothers effect and flotation efficiency was presented. A self-designed electrolytic cell was chosen as the reaction environment with sodium chloride (NaCl) as the electrolyte. Constant current, supplied by a self-designed power supplier and fixed cathode and anode equipment, guaranteed the constant bubble volume per unit time. Even aperture of the cathode material guaranteed the original bubbles size to be uniform. Bubble generating equipment was connected with a microscopical camera. Statistic data collected by high speed charge-coupled device (CCD) and processed by software Sigmascan and Matlab could reflect bubble characteristics. The efficiency of dipropylene glycol monomethyl ether (DPM) and tripropylene glycol n-butyl ethel (TPnB) were measured at the same condition, and 2×10-4 mol/L and 5×10-2 mol/L were found to be the inflexions of bubble size changes.展开更多
基金supported by the Natural Science Foundation of China(No.52174232)the Project was supported by Open Research Grant of Joint National-Local Engineering Research Centre for Safe and Precise Coal Mining(Nos.EC2022003 and EC2023005)+1 种基金Anhui University of Science and Technology 2023 Graduate Student Innovation Fund(No.2023cx2106)Open Research Grant of Anhui Engineering Research Center for Coal Clean Processing and Carbon Emission Reduction(No.CCCE-2023003).
文摘This study delves into the intricate relationship between iron(Fe)content in kaolinite and its impact on the adsorption behavior of sodium oleate.The effects of different iron concentrations on adsorption energy,hydrogen bond kinetics and adsorption efficiency were studied through simulation and experimental verification.The results show that the presence of iron in the kaolinite structure significantly improves the adsorption capacity of sodium oleate.Kaolinite samples with high iron content have better adsorption properties,lower adsorption energy levels and shorter and stronger hydrogen bonds than pure kaolinite.The optimal concentration of oleic acid ions for achieving maximum adsorption efficiency was identified as 1.2 mmol/L across different kaolinite samples.At this concentration,the adsorption rates and capacities reach their peak,with Fe-enriched kaolinite samples exhibiting notably higher flotation recovery rates.This optimal concentration represents a balance between sufficient oleic acid ion availability for surface interactions and the prevention of self-aggregation phenomena that could hinder adsorption.This study offers promising avenues for optimizing the flotation process in mineral processing applications.
基金Project(50834006) supported by National Natural of Science Foundation of China
文摘A new visual method for quantitative measurement of frothers effect and flotation efficiency was presented. A self-designed electrolytic cell was chosen as the reaction environment with sodium chloride (NaCl) as the electrolyte. Constant current, supplied by a self-designed power supplier and fixed cathode and anode equipment, guaranteed the constant bubble volume per unit time. Even aperture of the cathode material guaranteed the original bubbles size to be uniform. Bubble generating equipment was connected with a microscopical camera. Statistic data collected by high speed charge-coupled device (CCD) and processed by software Sigmascan and Matlab could reflect bubble characteristics. The efficiency of dipropylene glycol monomethyl ether (DPM) and tripropylene glycol n-butyl ethel (TPnB) were measured at the same condition, and 2×10-4 mol/L and 5×10-2 mol/L were found to be the inflexions of bubble size changes.
