Analytical solutions of steady vibration of free rectangular plate on semi-infinite elastic foundation

The method of double Fourier transform Was employed in the analysis of the semi-infinite elastic foundation with vertical load. And an integral representations for the displacements of the semi-infinite elastic foundation was presented. The analytical solution of steady vibration of an elastic rectangle plate with four free edges on the semi-infinite elastic foundation was also given by combining the analytical solution of the elastic rectangle plate with the integral representation for displacements of the semiinfinite elastic foundation. Some computational results and the analysis on the influence of parameters were presented.

Anti-Plane Elasticity Problem and Mode Ⅲ Crack Problem of Cubic Quasicrystal

The fracture theory of cubic quasicrystal was developed. The exact analytic solution of a Mode Ⅲ Griffith crack in the material was obtained by using the Fourier transform and dual integral equations theory, and so the displacement and stress fields, the stress intensity factor and strain energy release rate were determined. The results show that the stress intensity factor is independent of material constants, and the strain energy release rate is dependent on all material constants. These provide important information for studying the deformation and fracture of the new solid material.

Spectra of Off-diagonal Infinite-Dimensional Hamiltonian Operators and Their Applications to Plane Elasticity Problems

In the present paper, the spectrums of off-diagonal infinite-dimensional Hamiltonian operators are studied. At first, we prove that the spectrum, the continuous-spectrum, and the union of the point-spectrum and residual- spectrum of the operators are symmetric with respect to real axis and imaginary axis. Then for the purpose of reducing the dimension of the studied problems, the spectrums of the operators are expressed by the spectrums of the product of two self-adjoint operators in state spac,3. At last, the above-mentioned results are applied to plane elasticity problems, which shows the practicability of the results.

Symplectic eigenfunction expansion theorem for elasticity of rectangular planes with two simply-supported opposite sides

The eigenvalue problem of the Hamiltonian operator associated with plane elasticity problems is investigated.The eigenfunctions of the operator are directly solved with mixed boundary conditions for the displacement and stress in a rectangular region.The completeness of the eigenfunctions is then proved,providing the feasibility of using separation of variables to solve the problems.A general solution is obtained with the symplectic eigenfunction expansion theorem.

Reflection and refraction of plane waves at the boundary of an elastic solid and double-porosity dual-permeability materials

Phenomena of reflection and refraction of plane harmonic waves at a plane interface between an elastic solid and doubleporosity dual-permeability material are investigated. The elastic solid behaves non-dissipatively, while double-porosity dual-permeability materials behave dissipatively to wave propagation due to the presence of viscosity in pore fluids. All the waves(i.e., incident and reflected) in an elastic medium are considered as homogeneous(i.e., having the same directions of propagation and attenuation), while all the refracted waves in double-porosity dual-permeability materials are inhomogeneous(i.e., having different directions of propagation and attenuation). The coefficients of reflection and refraction for a given incident wave are obtained as a non-singular system of linear equations. The energy shares of reflected and refracted waves are obtained in the form of an energy matrix. A numerical example is considered to calculate the partition of incident energy among various reflected and refracted waves. The effect of incident direction on the partition of the incident energy is analyzed with a change in wave frequency, wave-induced fluid-flow, pore-fluid viscosity and double-porosity structure.It has been confirmed from numerical interpretation that during the reflection/refraction process, conservation of incident energy is obtained at each angle of incidence.

Complex variable solution for boundary value problem with X-shaped cavity in plane elasticity and its application*

A new type of displacement pile, the X-section cast-in-place concrete （XCC） pile, has recently been developed in China. Extensive field tests and laboratory experi- ments are undertaken to evaluate its performance and quantify the non-uniform deforma- tion effect （NUDE） of the X-shaped cross section during installation. This paper develops a simplified theoretical model that attempts to capture the NUDE. Based on the theory of complex variable plane elasticity, closed-form solutions of the stress and displacement for the X-shaped cavity boundary value problem are given. Subsequently, the analytical solution is used to evaluate the NUDE, the concrete filling index （CFI）, and the perimeter reduction coefficient of the XCC pile cross section. The computed results are compared with field test results, showing reasonable agreement. The present simplified theoretical model reveals the deformation mechanism of the X-shaped cavity and facilitates applica- tion of the newly developed XCC pile technique in geotechnical engineering.

Plane Elasticity and Dislocation of One-Dimensional Hexagonal Quasicrystals with Point Group 6

Plane elasticity theory of one-dimensional hexagonal quasicrystals with point group 6 is proposed and established. As an application of this theory, one typical example of dislocation problem in the quasicrystals is investigated and its exact analytic solution is presented. The result obtained indicates that the stress components of (elastic) fields of a straight dislocation in the quasicrystals still first order singularity, which is the same as the (general crystals,) but are related with the Burgers vector of phason fields, which is different from the general (crystals.)

EXACT SOLUTIONS OF NEAR CRACK LINE FIELDS FOR MODE I CRACK UNDER PLANE STRESS CONDITION IN AN ELASTIC－PERFECTLY PLASTIC SOLID

The near crack line analysis method has been used in the present paper,The classical small scale yielding conditions have been completely abandoned in the analyses and one inappropriate matching condition used to be used at the elasticplastic boundary has been corrected.The reasonable solution of the plastic stresses near the crack line region has been established.By matching the plastic stresses with the exact elastic stresses at the elastic-plastic boundary,the plastic stresses the length of the plastic zone and the unit normal vector of the elastic-plastic boundary near the crock line region have been obtained for a mode I crack under uniaxial tension,as well as a mode I crack under biaxial tension,which shows that for both conditions the plastic stress componentsσy, and σsy.he length of the plastic zone and the unit normal vector of the elastic-plastic boundary are quite the same while the plastic stress σs is different.

GENERAL FORM OF MATCHING EQUATION OF ELASTIC-PLASTIC FIELD NEAR CRACK LINE FOR MODE I CRACK UNDER PLANE STRESS CONDITION

Crack line field analysis method has become an independent method for crack elastic-plastic analysis, which greatly simplifies the complexity of crack elastic-plastic problems and overcomes the corresponding mathematical difficulty. With this method, the precise elastic-plastic solutions near crack lines for variety of crack problems can be obtained. But up to now all solutions obtained by this method were for different concrete problems, no general steps and no general form of matching equations near crack line are given out. With crack line analysis method, this paper proposes the general steps of elastic plastic analysis near crack line for mode I crack in elastic-perfectly plastic solids under plane stress condition, and in turn given out the solving process and result for a specific problem.

CRACK INITIATION AND STEADY PROPAGATION OF ELASTIC-PLASTIC MATERIALS IN PLANE STRESS CONDITION

The crack tip stress-strain fields of the elastic-plastic cracked specimens have been analyzed using finite element calculations.The crack initiation and steady propagation behaviours have also been investigated by means of slip line pattern etching technique and mechanical tests. The results show that there are HRR near field and distant field in the crack tip region,and the later depends on the specimen configuration.The crack initiation behaviour is controlled by a single parameter J.In contrast,the steady crack propagation is affected by the distant strain field and can not be described by single parameter only.

COORDINATES OF PRINCIPAL STRESSES FOR ELASTIC PLANE PROBLEM

In this paper, the equilibrium equations on orthogonal curve coordinates made of curves of principal stresses are disscused and their properties in process of solution are presented through a simple example. Therefore, it is deduced that there is another way to solve problems in elasticity, i.e., by assumption of orthogonal curves of principal stresses.

First fundamental problems of anisotropic elastic plane weakened by periodic collinear cracks

Using the method of complex functions, we discuss the first fundamental problems of an anisotropic infinite elastic plane weakened by periodic collinear cracks and with periodic boundary loads on both sides of the cracks. This problem was considered by Cai [Engineering Fracture Mechanics 46（1）, 133-142 （1993）]. However, the previous method is imperfect. Therefore, the results are incorrect. Here, we revise the method and give a correct solution.

Influence of Wires Properties on Warp-Knitted Loop Geometry in Plane Based on Theory of Elastic Rod

Based on classic theory of elastic rod,the warp-knitted loop geometry in plane is independent of yarn properties,while there is a certain gap between the geometrical model and the actual fabrics.According to this problem,further analysis of loop geometry is done based on the theory of elastic rod with theoretical calculation and experiments.The theoretical analysis found that the distance between the contacted points at the loop root affected the loop geometry,and the distance was affected by the ratio of bending rigidity and the friction between yarns.The experiments,forming simple loop by taking the yarn as an elastic rod,found that the bending rigidity affected the loop geometry.Then the relationships between warp-knitted loop geometry in plane of metallic fabrics and wires properties were studied.The results show that metallic fabrics are more suitable for the theory of elastic rod;the friction and bending rigidity of wire yarns affect the loop geometry in plane.Also,the elongation of yarn affects the loop geometry in the actual warp-knitted fabric.

PROBLEM OF THE PERIODIC WELDING OF ANISOTROPIC ELASTIC PLANE WITH DIFFERENT MATERIALS

In this paper, the problem of the periodic welding of an anisotropic elastic half_plane and a strip with different materials is studied. By means of the complex variable method for plane elasticity and the theory of boundary value problems for analytic function, the stress distribution is given in closed forms.

THE MORE GENERAL DISPLACEMENT SOLUTIONS FOR THE PLANE ELASTICITY PROBLEMS

In this paper, the author obtains the more general displacement solutions for the isotropic plane elasticity problems. The general solution obtained in ref. [ 1 ] is merely the particular case of this paper, In comparison with ref. [1], the general solutions of this paper contain more arbitrary constants. Thus they may satisfy more boundary conditions.

BOUNDARY INTEGRAL FORMULA OF ELASTICPROBLEMS IN CIRCLE PLANE

By bianalytic functions, the boundary integral formula of the stress function for the elastic problem in a circle plane is developed. But this integral formula includes a strongly singular integral and can not be directly calculated. After the stress function is expounded to Fourier series, making use of some formulas in generalized functions to the convolutions, the boundary integral formula which does not include strongly singular integral is derived further. Then the stress function can be got simply by the integration of the values of the stress function and its derivative on the boundary. Some examples are given. It shows that the boundary integral formula of the stress function for the elastic problem is convenient.

BOUNDARY INTEGRAL FORMULAS FOR ELASTIC PLANE PROBLEM OF EXTERIOR CIRCULAR DOMAIN

After the stress function and the normal derivative on the boundary for the plane problem of exterior circular domain are expanded into Laurent series, comparing them with the Laurent series of the complex stress function and making use of some formulas in Fourier series and the convolutions, the boundary integral formula of the stress function is derived further. Then the stress function can be obtained directly by the integration of the stress function and its normal derivative on the boundary. Some examples are given. It shows that the boundary integral formula of the stress function is convenient to be used for solving the elastic plane problem of exterior circular domain.

The Stress-strain Analysis for the Linearly Elastic and Power Hardening of Strength Difference Plane Structure of Bars Jointed to a Rigid-body

The plane structure of bars jointed to a rigid-body is a complex and universal structure.Some other structure of bars can be considered as its special cases. Many material have different stress-strain relation in tension and compression, generally the relation is nonlinear. In this paper,we use the constitutive model of linearly elastic and power hardening of strength difference to analyze plane structure of bars. The displacement method is used to derive the universal expression of calculating stress and strain. The nonlinear equations for computing displacements of the rigid-body has been given and general computing program has been worked out. This problem has been solved satisfactorily.

Spectral Description of a Class of Infinite-Dimensional Hamiltonian Operators and Its Application to Plane Elasticity Equations Without Body Force

In this paper,the results of spectral description and invertibility of upper triangle infinite-dimensionalHamiltonian operators with a diagonal domain are given.By the above results,it is proved that the infinite-dimensionalHamiltonian operator associated with plane elasticity equations without the body force is invertible,and the spectrumof which is non-empty and is a subset of R.

On plane Λ-fractional linear elasticity theory

Non-local plane elasticity problems are discussed in the context of Λ-fractional linear elasticity theory. Adapting the Λ-fractional derivative along with the Λ-fractional space, where geometry and mechanics are valid in the conventional way, non-local plane elasticity problems are solved with the help of biharmonic functions. Then, the results are transferred into the initial plane.Applications are presented to homogeneous and the fractional beam bending problem.