Optimizing Average Electric Power During the Charging of Lithium-Ion Batteries Through the Taguchi Method

In recent times, lithium-ion batteries have been widely used owing to their high energy density, extended cycle lifespan, and minimal self-discharge rate. The design of high-speed rechargeable lithium-ion batteries faces a significant challenge owing to the need to increase average electric power during charging. This challenge results from the direct influence of the power level on the rate of chemical reactions occurring in the battery electrodes. In this study, the Taguchi optimization method was used to enhance the average electric power during the charging process of lithium-ion batteries. The Taguchi technique is a statistical strategy that facilitates the systematic and efficient evaluation of numerous experimental variables. The proposed method involved varying seven input factors, including positive electrode thickness, positive electrode material, positive electrode active material volume fraction, negative electrode active material volume fraction, separator thickness, positive current collector thickness, and negative current collector thickness. Three levels were assigned to each control factor to identify the optimal conditions and maximize the average electric power during charging. Moreover, a variance assessment analysis was conducted to validate the results obtained from the Taguchi analysis. The results revealed that the Taguchi method was an eff ective approach for optimizing the average electric power during the charging of lithium-ion batteries. This indicates that the positive electrode material, followed by the separator thickness and the negative electrode active material volume fraction, was key factors significantly infl uencing the average electric power during the charging of lithium-ion batteries response. The identification of optimal conditions resulted in the improved performance of lithium-ion batteries, extending their potential in various applications. Particularly, lithium-ion batteries with average electric power of 16 W and 17 W during charging were designed and simulated in the range of 0-12000 s using COMSOL Multiphysics software. This study efficiently employs the Taguchi optimization technique to develop lithium-ion batteries capable of storing a predetermined average electric power during the charging phase. Therefore, this method enables the battery to achieve complete charging within a specific timeframe tailored to a specificapplication. The implementation of this method can save costs, time, and materials compared with other alternative methods, such as the trial-and-error approach.

Identification of Key Links in Electric Power Operation Based-Spatiotemporal Mixing Convolution Neural Network

As the scale of the power system continues to expand,the environment for power operations becomes more and more complex.Existing risk management and control methods for power operations can only set the same risk detection standard and conduct the risk detection for any scenario indiscriminately.Therefore,more reliable and accurate security control methods are urgently needed.In order to improve the accuracy and reliability of the operation risk management and control method,this paper proposes a method for identifying the key links in the whole process of electric power operation based on the spatiotemporal hybrid convolutional neural network.To provide early warning and control of targeted risks,first,the video stream is framed adaptively according to the pixel changes in the video stream.Then,the optimized MobileNet is used to extract the feature map of the video stream,which contains both time-series and static spatial scene information.The feature maps are combined and non-linearly mapped to realize the identification of dynamic operating scenes.Finally,training samples and test samples are produced by using the whole process image of a power company in Xinjiang as a case study,and the proposed algorithm is compared with the unimproved MobileNet.The experimental results demonstrated that the method proposed in this paper can accurately identify the type and start and end time of each operation link in the whole process of electric power operation,and has good real-time performance.The average accuracy of the algorithm can reach 87.8%,and the frame rate is 61 frames/s,which is of great significance for improving the reliability and accuracy of security control methods.

Controller Design for Electric Power Steering System Using T-S Fuzzy Model Approach

Pressure ripples in electric power steering （EPS） systems can be caused by the phase lag between the driver s steering torque and steer angle, the nonlinear frictions, and the disturbances from road and sensor noise especially during high-frequency maneuvers. This paper investigates the use of the robust fuzzy control method for actively reducing pressure ripples for EPS systems. Remarkable progress on steering maneuverability is achieved. The EPS dynamics is described with an eight-order nonlinear state-space model and approximated by a Takagi-Sugeno （T-S） fuzzy model with time-varying delays and external disturbances. A stabilization approach is then presented for nonlinear time-delay systems through fuzzy state feedback controller in parallel distributed compensation （PDC） structure. The closed-loop stability conditions of EPS system with the fuzzy controller are parameterized in terms of the linear matrix inequality （LMI） problem. Simulations and experiments using the proposed robust fuzzy controller and traditional PID controller have been carried out for EPS systems. Both the simulation and experiment results show that the proposed fuzzy controller can reduce the torque ripples and allow us to have a good steering feeling and stable driving.

Precise Compound Control of Loading Force for Electric Load Simulator of Electric Power Steering Test Bench

Electric load simulator(ELS) systems are employed for electric power steering(EPS) test benches to load rack force by precise control. Precise ELS control is strongly influenced by nonlinear factors. When the steering motor rapidly rotates, extra force is directly superimposed on the original static loading error, which becomes one of the main sources of the final error. It is key to achieve ELS precise loading control for the entire EPS test bench. Therefore, a three-part compound control algorithm is proposed to improve the loading accuracy. First, a fuzzy proportional–integral plus feedforward controller with force feedback is presented. Second, a friction compensation algorithm is established to reduce the influence of friction. Then, the relationships between each quantity and the extra force are analyzed when the steering motor rapidly rotates, and a net torque feedforward compensation algorithm is proposed to eliminate the extra force. The compound control algorithm was verified through simulations and experiments. The results show that the tracking performance of the compound control algorithm satisfies the demands of engineering practice, and the extra force in the ELS system can be suppressed by the net torque corresponding to the actuator’s acceleration.

Model development and parameter investigation of a column-type electric power steering system

In this paper, the performance of a column-type electric power steering （EPS） system and vehicle has been studied and a detailed mathematical model for the system has been established. Based on the mathematic model of the optimization design for steering feel, the parameters of the EPS system and vehicle on steering performance have been investigated. Moreover, the effects of the parameters on system stability have been analyzed and compared by the method of absolute sensitivity and the results are given in the end.

Annual Report of SGCC on Transactions of Electric Power Market in 2009

Market construction Overview In 2009, the electric power market expanded continuously. New installed capacity put into production within the coverage of the State Grid Corporation

Supply Chain Cooperation between Coal Enterprise and Electric Power Enterprise in China

Based on the two-stage Stackelberg game method, value creation of supply chain cooperation between coal enterprise and power utilities is studied by formulating profit functions of coal and power enterprises and calculating the maximum profit. According to the analysis, it is found that the profit from supply chain cooperation between coal and power enterprises is more than that of non- cooperation. The cooperation is validated to be beneficial for both units; however, the profit is mainly taken by the power enterprise. Thus, it is necessary to set up the incentive mechanism to distribute cooperation value between coal and power enterprises to promote their continual cooperation.

Determination of Effective Load Shedding Schemes in Electric Power Plants

The ability of power system to survive the transition from preloading state to the gradual increase in load and thereafter reach an acceptable operational condition is an indication of transient stability of the system. The study analyzed load shedding scheme through the use of empirical measurement tools and load-flow simulation techniques. It was geared towards determining effective load shedding strategies to reduce unnecessary overload in order to achieve dynamic stability of the electric power network in the Export Free Trade Zone, Calabar, Nigeria. From the tests and the measurements taken, it was observed that the real and reactive powers from the generator and the mechanical power from the turbine engine were stable when the load shedding controller was switched on, as compared to when it was off. The engine speed, the bus-bar frequency and the output voltage of the generator stabilized within a shorter time (about 8 seconds) when the controller was switched on than when it was on the off condition. Also, there were noticeable fluctuations in the speed of the remaining two generators. It became stable at about 12 seconds after the loss. The variations were 0.3 per cent of the nominal speed value. The excitation voltage fluctuated from 1.2 (pu) to 4.5 (pu) when the bus voltage dipped as a result of additional load. It then came down and stabilized at 1.8 (pu) after few swings. This confirmed that the stability of power system is much enhanced when load shedding controllers are effectively configured on the network.

700 GW: A New Start of Electric Power Industry

On December 4, 2007, unit 1of Taizhou Power Plant was put into operation, which became the symbolic unit of the installed capacity reaching 700 GW in China. On July 31, 2008, sponsored by the National Energy Administration and assisted by the China Electricity Council and the China Guodian Corporation, the "Conferring Ceremony for the 700 GW Symbolic Generating Unit of China" was held in the Great Hall of the People, Beijing. Zhang Guobao, vice chairman of the National Development and Reform Commission and Administrator of the newly established National Energy Administration attended the ceremony and delivered an important speech. Here published is an abridgment from the speech.

Seismic reliability analysis of large electric power systems

Based on the De.Morgan laws and Boolean simplification, a recursive decomposition method is introduced in this paper to identify the main exclusive safe paths and failed paths of a network. The reliability or the reliability bound of a network can be conveniently expressed as the summation of the joint probabilities of these paths. Under the multivariate normal distribution assumption, a conditioned reliability index method is developed to evaluate joint probabilities of various exclusive safe paths and failed paths, and, finally, the seismic reliability or the reliability bound of an electric power system. Examples given in the paper show that the method is very simple and provides accurate results in the seismic reliability analysis.

Development of a methodology for assessing the adequacy of electric power systems

This study presents the results of a research into the developing a methodology for assessing the adequacy of advanced electric power systems characterized by the integration of various innovative technologies,which complicates their analysis.The methodology development is aimed at solving two main problems:(1)increase the adequacy of modeling the processes that occur in the electric power system and (2)enhance the computational efficiency of the adequacy assessment methodology.This study proposes a new mathematical model to minimize the power shortage and enhance the adequacy of modeling the processes.The model considers quadratic power transmission losses and network coefficients.The computational efficiency of the adequacy assessment methodology is enhanced using efficient random-number generators to form the calculated states of electric power systems and machine learning methods to assess power shortages and other reliability characteristics in the calculated states.

Key technologies of artificial intelligence in electric power customer service

As the demand for customer service continues to increase,more companies are attempting to apply artificial intelligence technology in the field of customer service,enabling intelligent customer service,reducing customer service pressure,and reducing operating costs.Currently,the existing intelligent customer service has a limited degree of intelligence and can only answer simple user questions,and complex user expressions are difficult to understand.To solve the problem of low accuracy of multi-round dialogue semantic understanding,this paper proposes a semantic understanding model based on the fusion of a convolutional neural network(CNN)and attention.The model builds an“intention-slot”joint model based on the“encoding–decoding”framework and uses hidden semantic information that combines intent recognition and slot filling,avoiding the problem of information loss in traditional isolated tasks,and achieving end-to-end semantic understanding.Additionally,an improved attention mechanism based on CNNs is introduced in the decoding process to reduce the interference of redundant information in the original text,thereby increasing the accuracy of semantic understanding.Finally,by applying the model to electric power intelligent customer service,we verified through an experimental comparison that the proposed fusion model improves the performance of intent recognition and slot filling and can improve the user experience of electric power intelligent customer services.

THE PROSPECTIVE OF NEW TECHNOLOGY DEVELOPMENT FOR SUSTAINABLE ELECTRIC POWER SUPPLY IN CHINA

China is a large developing country with rapid growth rate. To the year 2050, its electric power will be increased by six to eight times, reaching 1.5—1.8 TW total installed capacity. The development can not only rely on the existing technology, it is crucial to accelerate the new technology development. This article discusses the perspective of various new technologies from the available energy resources and the required increase of electric power.

An Improved Immune Clone Selection Algorithm for Parameters Optimization of Marine Electric Power System Stabilizer

In themarine electric power system,the marine generators will be disturbed by the large change of loads or the fault of the power system.The marine generators usually installed power system stabilizers to damp power system oscillations through the excitation control.This paper proposes a novel method to obtain optimal parameter values for Power System Stabilizer(PSS)to suppress low-frequency oscillations in the marine electric power system.In this paper,a newly developed immune clone selection algorithm was improved from the three aspects of the adaptive incentive degree,vaccination,and adaptive mutation strategies.Firstly,the typical PSS implementation type of leader-lag structure was adopted and the objective function was set in the optimization process.The performance of PSS tuned by improved immune clone selection algorithm was compared with PSS tuned by basic immune clone selection algorithm(ICSA)under various operating conditions and disturbances.Then,an improved immune clone selection algorithm(IICSA)optimization technique was implemented on two test systems for test purposes.Based on the simulations,it is found that an improved immune clone selection algorithm demonstrates superiority over the basic immune clone selection algorithm in getting a smaller number of iterations and fast convergence rates to achieve the optimal parameters of the power system stabilizers.Moreover,the proposed approach improves the stability and dynamic performance under various loads conditions and disturbances of the marine electric power system.

Experimental Study on Cloud-Computing-Based Electric Power SCADA System

With the development of smart grid, the electric power supervisory control and data acquisition （SCADA） system is limited by the traditional IT infrastructure, leading to low resource utilization and poor scalability. Information islands are formed due to poor system interoperability. The development of innovative applications is limited, and the launching period of new businesses is long. Management costs and risks increase, and equipment utilization declines. To address these issues, a professional private cloud solution is introduced to integrate the electric power SCADA system, and conduct experimental study of its applicability, reliability, security, and real time. The experimental results show that the professional private cloud solution is technical and commercial feasible, meeting the requirements of the electric power SCADA system.

Cross-spectral root-min-norm algorithm for harmonics analysis in electric power system

To avoid drawbacks of classic discrete Fourier transform(DFT)method,modern spectral estimation theory was introduced into harmonics and inter-harmonics analysis in electric power system.Idea of the subspace-based root-min-norm algorithm was described,but it is susceptive to noises with unstable performance in different SNRs.So the modified root-min-norm algorithm based on cross-spectral estimation was proposed,utilizing cross-correlation matrix and independence of different Gaussian noise series.Lots of simulation experiments were carried out to test performance of the algorithm in different conditions,and its statistical characteristics was presented.Simulation results show that the modified algorithm can efficiently suppress influence of the noises,and has high frequency resolution,high precision and high stability,and it is much superior to the classic DFT method.

Impacts of a Japan–South Korea power system interconnection on the competitiveness of electric power companies according to power exchange prices

In many regions,international power system interconnections provide economic,energy-security,environmental,and technical benefits.In contrast,such interconnections remain scarce in Northeast Asia.In 2016,after approving a joint memorandum of understanding between major electric power companies from China,Japan,South Korea,and Russia,related initiatives regained momentum in the region.Nevertheless,the corresponding developments in Japan remain limited,mainly owing to the lack of involvement of Japanese electric power companies.This study represents a pioneering attempt to provide an economic assessment based on power exchange prices of a power system interconnection between Japan and South Korea regarding the competitiveness of electric power companies in terms of competitive business segments and strategic consequences.We found that although the position of Japanese generators may slightly deteriorate,that of the supply segment would substantially improve,thus suggesting that more opportunities than threats are derived from the interconnection.This promising outcome may foster the adoption of an interconnection with South Korea considering the positive economic and business perspectives in Japan.Furthermore,realizing the interconnection may improve the energy security and air quality in the region.

Electric Power Quality Analysis 6-10/0.4 kV Distribution Networks

The paper reports quality analysis and evaluation at 6 - 10/0.4 kV low-voltage distribution grids in Uzbekistan. Power quality frequently does not correspond to the rated value which is largely due to unbalanced phase loading in grids and which also results in increased power loss. The study of the asymmetrical operating modes of the rural distribution networks of 0.4 kV was conducted in three steps: measurement, calculations and analysis of relevant data;providing practical guidelines and finally, implementing instruments to normalize grid operation. Measuring was conducted using certified instrumentation analyzer “MALIKA” designed by authors. The study and analysis of additional power losses as the function of indicators of asymmetrical features of voltage and current in operating 0.4 kV grids reveals that, quality of electric power at grids under investigation, merely does not meet the requirements of the Interstate Standard.