Electrostatic separation is one of the mineral processing methods based on mineral conductivity.This method has some significant problems such as being sensitive to humidity,high middling product,and impurity of non-c...Electrostatic separation is one of the mineral processing methods based on mineral conductivity.This method has some significant problems such as being sensitive to humidity,high middling product,and impurity of non-conductive minerals.In this study,a new pretreatment method was proposed for the separation of zircon from quartz before electrostatic separation to solve these disadvantages.In this regard,two stages of pretreatment were applied which involved using collector of sodium dodecyl sulfate(SDS)for adjusting wettability of the zircon surface and spraying electrolyte aqueous solution to increase conductivity of the quartz surface.The effects of important parameters including pH,collector concentration,conditioning time,and concentration and type of electrolyte on the process efficiency were evaluated.The results showed that the optimal conditions of high-tension electrical separation were pH of 4,SDS concentration of 1×10-4 mol/L,conditioning time of 4 min and NaCl as an electrolyte with concentration of 4.27 mol/L.Separation efficiency of 95.12% was achieved in optimum conditions.This pretreatment method can be successfully used before high-tension electrical separation to separate the conductive or non-conductive minerals with various compositions.展开更多
A novel hydrothermal process was developed to extract zinc from pure zinc ferrite（ZnFe2O4） nanopowder and zinc-containing electric arc furnace（EAF） dust using hexahydrated ferric chloride（FeCl3-6H2O） as a decomp...A novel hydrothermal process was developed to extract zinc from pure zinc ferrite（ZnFe2O4） nanopowder and zinc-containing electric arc furnace（EAF） dust using hexahydrated ferric chloride（FeCl3-6H2O） as a decomposing agent.The effects of solid FeCl3-6H2O to ZnFe2O4 ratio by mass（RF/Z）,hydrothermal reaction temperature,and time on zinc extraction were systematically investigated.In the results,when the hydrothermal reaction is conducted at 150℃ for 2 h with RF/Z of 15：20,the efficiency of zinc extraction from ZnFe2O4 reaches97.2%,and the concentration of ferric ions（Fe^3＋） in the leaching solution is nearly zero,indicating a high selectivity for zinc.In addition,the zinc extraction efficiency from the EAF dust reaches 94.5%in the case of the hydrothermal reaction performed at 200℃ for 10 h with the solid FeCl3-6H2O to EAF dust ratio by mass（RF/EAF dust） of 15：10.Zinc and iron separation is achieved by adjusting the pH value of the leaching solution according to the different precipitation pH values of metal hydroxides.展开更多
Fly ash is a fine and dispersed powder discharged from power station after the coal being burned. With the deepening of people’s recognition about the pollution problem of fly ash, the ways of utilizing fly ash are g...Fly ash is a fine and dispersed powder discharged from power station after the coal being burned. With the deepening of people’s recognition about the pollution problem of fly ash, the ways of utilizing fly ash are gradually increasing. Utilizing value of fly ash is closely related to the unburned carbon content.On the basis of analysis of modern testing method,a fundamental thinking is theoretically posed for decreasing unburned carbon content from fly ash by a dry removing carbon technology. The triboelectric separation method shown that the above mentioned thinking of dry removing carbon from fly ash is practical.展开更多
文摘Electrostatic separation is one of the mineral processing methods based on mineral conductivity.This method has some significant problems such as being sensitive to humidity,high middling product,and impurity of non-conductive minerals.In this study,a new pretreatment method was proposed for the separation of zircon from quartz before electrostatic separation to solve these disadvantages.In this regard,two stages of pretreatment were applied which involved using collector of sodium dodecyl sulfate(SDS)for adjusting wettability of the zircon surface and spraying electrolyte aqueous solution to increase conductivity of the quartz surface.The effects of important parameters including pH,collector concentration,conditioning time,and concentration and type of electrolyte on the process efficiency were evaluated.The results showed that the optimal conditions of high-tension electrical separation were pH of 4,SDS concentration of 1×10-4 mol/L,conditioning time of 4 min and NaCl as an electrolyte with concentration of 4.27 mol/L.Separation efficiency of 95.12% was achieved in optimum conditions.This pretreatment method can be successfully used before high-tension electrical separation to separate the conductive or non-conductive minerals with various compositions.
基金supported by the National Basic Research Priorities Program of China (Nos. 2014CB643401 and 2013AA032003)the National Natural Science Foundation of China (No.51372019)
文摘A novel hydrothermal process was developed to extract zinc from pure zinc ferrite（ZnFe2O4） nanopowder and zinc-containing electric arc furnace（EAF） dust using hexahydrated ferric chloride（FeCl3-6H2O） as a decomposing agent.The effects of solid FeCl3-6H2O to ZnFe2O4 ratio by mass（RF/Z）,hydrothermal reaction temperature,and time on zinc extraction were systematically investigated.In the results,when the hydrothermal reaction is conducted at 150℃ for 2 h with RF/Z of 15：20,the efficiency of zinc extraction from ZnFe2O4 reaches97.2%,and the concentration of ferric ions（Fe^3＋） in the leaching solution is nearly zero,indicating a high selectivity for zinc.In addition,the zinc extraction efficiency from the EAF dust reaches 94.5%in the case of the hydrothermal reaction performed at 200℃ for 10 h with the solid FeCl3-6H2O to EAF dust ratio by mass（RF/EAF dust） of 15：10.Zinc and iron separation is achieved by adjusting the pH value of the leaching solution according to the different precipitation pH values of metal hydroxides.
文摘Fly ash is a fine and dispersed powder discharged from power station after the coal being burned. With the deepening of people’s recognition about the pollution problem of fly ash, the ways of utilizing fly ash are gradually increasing. Utilizing value of fly ash is closely related to the unburned carbon content.On the basis of analysis of modern testing method,a fundamental thinking is theoretically posed for decreasing unburned carbon content from fly ash by a dry removing carbon technology. The triboelectric separation method shown that the above mentioned thinking of dry removing carbon from fly ash is practical.
