A Novel Packet Switch Node Architecture for Contention Resolution in Synchronous Optical Packet Switched Networks

Packet contention is a key issue in optical packet switch (OPS) networks and finds a viable solution by including optical buffering techniques incorporating fiber delay lines (FDLs) in the switch architecture. The present paper proposes a novel switch architecture for packet contention resolution in synchronous OPS network employing the packet circulation in FDLs in a synchronized manner. A mathematical model for the proposed switch architecture is developed employing packet queuing control to estimate the blocking probability for the incoming traffic. The switch performance is analyzed with a suitable contention resolution al-gorithm through the computer simulation. The simulation results substantiate the proposed model for the switch architecture.

Simulation of Optical Packet-Switched Metropolitan Area Network

This paper introduces architectures of two types optical packet switched metropolitan area networks and their media access control protocols. We have designed related network simulation systems. With these simulation systems, the characteristics and performance of the two MANs can be achieved.

A novel data channel fault detection mechanism in optical burst switching networks

Fault detection in optical burst switching （OBS） networks will be a challenging task in the future. A novel mechanism based on probe burst （PB） and a new key concept is proposed to detect faults of OBS networks by sampling the health of data channels, which solve the difficulty of optical monitoring schemes while keeps the transparency of data network to Internet protocol （IP） packets. It takes full advantage of the characteristics of OBS, including architecture and signalling scheme, and introduces the excellent performances of single-hop-test used in electrical communication networks into OBS environment while avoids the shortcoming that any optical burst must undergo an optical-electric-optical （OEO） conversion. Well designed PB can provide exact criterion for judging whether protection/restoration should be excuted according to hard or soft fault identification.

An Arrangement of Channels and Transceivers in Optical Packet Switching Networks

Based on a media access and control（MAC）protocol,an arrangement of channels and transceivers in optical packet switching dense wavelength division multiplexing（DWDM）networks is proposed in this paper.In order to reduce the cost of nodes,fixed transmitters and receivers are used instead of tunable transmitters and receivers.Two fixed transmitters and many fixed receivers are used in each node in the scheme.The average waiting delay of this scheme is analyzed through mathematics and computer simulation.The result shows that the property of the scheme is almost the same as using tunable transmitter and receiver.Furthermore,if the tuning time of tunable transmitters is taken into account,the performance of the tunable transmitter scheme is poor than this scheme at the average waiting delay and throughput of the network.

5G Flexible Optical Transport Networks with Large-Capacity, Low-Latency and High-Efficiency

The fifth generation(5G) of mobile communications are facing big challenges, due to the proliferation of diversified terminals and unprecedented services such as internet of things(IoT), high-definition videos, virtual/augmented reality(VR/AR). To accommodate massive connections and astonish mobile traffic, an efficient 5G transport network is required. Optical transport network has been demonstrated to play an important role for carrying 5G radio signals. This paper focuses on the future challenges, recent studies and potential solutions for the 5G flexible optical transport networks with the performances on large-capacity, low-latency and high-efficiency. In addition, we discuss the technology development trends of the 5G transport networks in terms of the optical device, optical transport system, optical switching, and optical networking. Finally, we conclude the paper with the improvement of network intelligence enabled by these technologies to deterministic content delivery over 5G optical transport networks.

Research and Progress of Service Driven Optical Switching Network in China

National R&D activities on optical switching networkare introduced. Optical switching network testbedswere established in China including 3T-net andOBS ring and mesh network test-bed with the supportof national '863' program. As an importantmodule in OPS network, a novel all-optical serialmulticast mode is discussed.

Network Resource Provisioning for IP over Multi-Granular Optical Networks

In the internet protocol（IP） over multi-granular optical switch network （IP/MG-OXC）, the network node is a typical multilayer switch comprising several layers, the IP packet switching （PXC） layer, wavelength switching （WXC） layer and fiber switching （FXC） layer. This network is capable of both IP layer grooming and wavelength grooming in a hierarchical manner. Resource provisioning in the multi-granular network paradigm is called hierarchical grooming problem. An integer linear programming （ILP） model is proposed to formulate the problem. An iterative heuristic approach is developed for solving the problem in large networks. Case study shows that IP/MG-OXC network is much more extendible and can significantly save the overall network cost as compared with IP over wavelength division multiplexing network.

Design and Simulation of Routing-switching Protocol Based on Optical Switch Array

An optical routing-switching technology based on optical switch array is proposed.The characteristics of the blocking and nonblocking networks are analyzed and compared,odd-even sorting network is used to realize optical routing-switching,relative routing-switching protocol is designed.Simulation test under load shows that it can reduce a blocking effectively and enhance an efficiency of switching.Further,it can transfer the processing and switching within parallel computer from electric domain to optical domain. It can make parallel computer coordinating computing and processing at much more higher speed, storing and transmitting even more efficiently.

Flexible orbital angular momentum mode switching in multimode fibre using an optical neural network chip

Mode-division multiplexing technology has been proposed as a crucial technique for enhancing communication capacity and alleviating growing communication demands.Optical switching,which is an essential component of optical communication systems,enables information exchange between channels.However,existing optical switching solutions are inadequate for addressing flexible information exchange among the mode channels.In this study,we introduced a flexible mode switching system in a multimode fibre based on an optical neural network chip.This system utilised the flexibility of on-chip optical neural networks along with an all-fibre orbital angular momentum(OAM)mode multiplexer-demultiplexer to achieve mode switching among the three OAM modes within a multimode fibre.The system adopted an improved gradient descent algorithm to achieve training for arbitrary 3×3 exchange matrices and ensured maximum crosstalk of less than-18.7 dB,thus enabling arbitrary inter-mode channel information exchange.The proposed optical-neural-network-based mode-switching system was experimentally validated by successfully transmitting different modulation formats across various modes.This innovative solution holds promise for providing effective optical switching in practical multimode communication networks.

MSONoC: a non-blocking optical interconnection network for inter cluster communication

Electric router is widely used for multi-core system to interconnect each other. However, with the increasing number of processor cores, the probability of communication conflict between processor cores increases, and the data delay increases dramatically. With the advent of optical router, the traditional electrical interconnection mode has changed to optical interconnection mode. In the packet switched optical interconnection network, the data communication mechanism consists of 3 processes: link establishment, data transmission and link termination, but the circuit-switched data transmission method greatly limits the utilization of resources. The number of micro-ring resonators in the on-chip large-scale optical interconnect network is an important parameter affecting the insertion loss. The proposed λ-route, GWOR, Crossbar structure has a large overall network insertion loss due to the use of many micro-ring resonators. How to use the least micro-ring resonator to realize non-blocking communication between multiple cores has been a research hotspot. In order to improve bandwidth and reduce access latency, an optical interconnection structure called multilevel switching optical network on chip(MSONoC) is proposed in this paper. The broadband micro-ring resonators(BMRs) are employed to reduce the number of micro-ring resonators(MRs) in the network, and the structure can provide the service of non-blocking point to point communication with the wavelength division multiplexing(WDM) technology. The results show that compared to λ-route, GWOR, Crossbar and the new topology structure, the number of micro-ring resonators of MSONoC are reduced by 95.5%, 95.5%, 87.5%, and 60% respectively. The insertion loss of the minimum link of new topology, mesh and MSONoC structure is 0.73 dB, 0.725 dB and 0.38 dB.

Demonstration of Orbital-Angular-Momentum-Based Optical Switching Using Dual-Area Mirrors

We have designed an optical separation device called dual-area mirror for the data link of orbital angular momentum (OAM) multiplexing. Experiments show that the OAM multiplexed beams can be switched by using dual-area mirrors, using OOK to modulate four channels separately to form two inputs, channel A and channel B. There are two OAM beams that are multiplexed in each of channel A and channel B, using a spatial light modulator (SLM) to convert the OAM multiplexed beams in each channel. One of the beams is converted into a Gaussian beam, and then separated by a dual-area mirror, so as to realize the switch of a beam carrying different data in the two channels. Then these channels are detected. The waveform indicates that the switch is successful, and the measured optical power indicates that the dual-area mirror can reduce the bit error rate in the communication links. In addition, the device reduces the experimental cost, is easy to implement, is easy to integrate, and increases the angle between the separated beams.

A novel differentiated services supporting scheme for optical burst switched networks

In this letter, we analyze the drawback of tail-dropping contention resolution in optical burst switched networks. Once contention occurs, we adopt modified head-dropping policy to resolve contention. This policy drops the head of the contending burst only if the overlapping region of the two bursts is less than the whole contending burst size, otherwise drops the whole contending burst. In order to have a better support of differentiated service, a new burst assembly policy, namely, Priority-based proportional mixed burst assembly, is proposed. Simulation results show that the proposed scheme performs very well in terms of performance metrics such as the times of contention and packet loss probability.

Research on performance of multicasting in optical packet switched networks

Different multicasting schemes in optical packet switched networks are discussed, including the parallel mode, serial mode, and hybrid mode multicasting schemes. Simulated modeling technique is applied to compare the network-level performance of the three multicasting schemes. A conclusion can be drawn from the results that since the hybrid-mode multicasting scheme can increase the multicast success ratio and reduce the packet retransmission times compared with the other two schemes, it is the best choice for delivering multicasting sessions in the optical packet switched networks.

Priority-Based Mixed Assembly Supporting Differentiated Service for Optical Burst Switched Networks

In order to have a better support of differentiated service, we propose Priority-based mixed burst assembly, in which packets of different priorities are assembled in a burst with an assigned proportion, and the priorities are lined in an ascending order in a burst from head to tail. Simulation results show that the proposed scheme performs very well in terms of latency and packet loss probability.

Optical SDMA for applying compressive sensing in WSN

In order to apply compressive sensing in wireless sensor network, inside the nodes cluster classified by the spatial correlation, we propose that a cluster head adopts free space optical communication with space division multiple access, and a sensor node uses a modulating retro-reflector for communication. Thus while a random sampling matrix is used to guide the establishment of links between head cluster and sensor nodes, the random linear projection is accomplished. To establish multiple links at the same time, an optical space division multiple access antenna is designed. It works in fixed beams switching mode and consists of optic lens with a large field of view（FOV）, fiber array on the focal plane which is used to realize virtual channels segmentation, direction of arrival sensor, optical matrix switch and controller. Based on the angles of nodes＇ laser beams, by dynamically changing the route, optical matrix switch actualizes the multi-beam full duplex tracking receiving and transmission. Due to the structure of fiber array, there will be several fade zones both in the focal plane and in lens＇ FOV. In order to lower the impact of fade zones and harmonize multibeam, a fiber array adjustment is designed. By theoretical, simulated and experimental study, the antenna＇s qualitative feasibility is validated.

Heralded linear optical quantum Fredkin gate based on one auxiliary qubit and one single photon detector

Linear optical quantum Fredkin gate can be applied to quantum computing and quantum multi-user communication networks. In the existing linear optical scheme, two single photon detectors （SPDs） are used to herald the success of the quantum Fredkin gate while they have no photon count. But analysis results show that for non-perfect SPD, the lower the detector efficiency, the higher the heralded success rate by this scheme is. We propose an improved linear optical quantum Fredkin gate by designing a new heralding scheme with an auxiliary qubit and only one SPD, in which the higher the detection efficiency of the heralding detector, the higher the success rate of the gate is. The new heralding scheme can also work efficiently under a non-ideal single photon source. Based on this quantum Fredkin gate, large-scale quantum switching networks can be built. As an example, a quantum Bene~ network is shown in which only one SPD is used.

Deployment of the Content-Based Switching Network

In this paper, we propose a hybrid network architecture, called Content-based Switching Network (CSN), and its signaling scheme, which addresses the issues inherent to conventional hybrid networks which implement a horizontal separation over the entire network (from edge to edge). We will show how CSN nodes can flexibly choose their switching paradigm (store-and-forward, optical bypass, electrical bypass) during a path establishment. Contents being transferred in one piece from end-to-end, the concept of packet can be eluded in our network, and, in particular, the user is able to avoid complicated transport layer functions, like TCP, if they are not essential. In CSN, very large contents have a special status, since they cannot be store-and-forwarded. We will show how the resource management has been designed in order to deal with such contents. A section is dedicated to deployment and feasibility issues. Simulation results will show that CSN can successfully transfer contents at 1 Gbps and 10 Gbps, the maximum speed being limited by the state-of-the-art device technologies when buffering is required (memory speed), while no major limit is observed in the case of all-optical transfers other than the optical fiber speed. Other results concern the deployment of CSN from an unclean slate approach. They will show how beneficial can be the deployment of CSN from an Optical Circuit Switching network.

A new burst assembly technique for supporting QoS in optical burst switching networks

This letter proposes a new burst assembly technique for supporting QoS in optical burst switching (OBS) networks. It consists of the adaptive-threshold burst assembly mechanism and QoS-based random offset-time scheme. The assembly mechanism, which is fit well to multi-class burst assembly, not only matches with IP QoS mechanism based on packet classification, and also utilizes fairly and efficiently assembly capacity. Based on token-bucket model and burst segment selective discard (BSSD), the offset-time scheme can smooth the traffic to support OBS QoS. The simulation results show that the technique can improve the performance in terms of packet loss probability (PLP).

A novel optical burst switching architecture for high speed networks

A novel optical burst switching （OBS） high speed network architecture has been proposed. To verify its feasibility and evaluate its performance, just-enough-time （JET） signaling has been considered as a high performance protocol. In the proposed architecture, to avoid burst losses, firstly, a short-prior- confirmation-packet （SPCP） is sent over the control channel that simulates the events that the actual packet will experience. Once SPCP detects a drop at any of the intermediate nodes, the actual packet is not sent but the process repeats. In order to increase network utilization, cost effectiveness and to overcome some limitations of conventional OBS, inherent codes （e.g., orthogonal optical codes （OOC））, which are codified only in intensity, has been used. Through simulations, it shows that a decrease in burst loss probability, cost effectiveness and a gain in processing time are obtained when optical label processing is used as compared with electronic processing.

Seamlessly transformable hybrid packet and circuit switching for efficient optical networks

Efforts in realizing all-optical packet switching are overwhelming in the past decade. While optical packet switching remains an attractive switching paradigm in the long run, technical challenges prohibit it from becoming a practical solution for the ever-growing bandwidth hunger during the next few years. Finding a technically viable way to meet the increasing capacity requirement with good scalability and flexibility becomes a clear pursue for the community. Hybrid packet and circuit switching is considered to be one promising technique in realizing high performance switching at low cost and less energy consumption, by taking the advantage of both packet switching and circuit switching. In this paper, we review existing work in hybrid optical packet and circuit switching. We discuss the key technical challenges in realizing hybrid optical packet and circuit switching. We further introduce our ongoing efforts in building a seamlessly transformable packet/circuit-switching node with in a hybrid node, the scheduling complexity with a node running in full packet switching mode. hybrid optical and electronic components. We show that typical scheduling algorithms may be reduced to half of