NOx Reduction and Desorption Studies Under Electric Discharge Plasma Using a Simulated Gas Mixture:A Case Study on the Effect of Corona Electrodes

In this study, reduction and desorption of oxides of nitrogen （NOx） were conducted using an electrical discharge plasma technique. The study was carried out using a simulated gas mixture to explore the possibility of re-generation of used adsorbents by a nonthermal plasma desorption technique. Three different types of corona electrodes, namely, pipe, helical wire, and straight wire, were used for analyzing their effectiveness in NOx reduction/desorption. The pipe- type corona electrode exhibited a nitric oxide （NO） conversion of 50%, which is 1.5 times that of the straight-wire-type electrode at an energy density of 175 J/L. The helical-wire-type corona electrode exhibited a NOx desorption efficiency almost 4 times that of the pipe-type electrode, indicating the possibility that corona-generated species play a crucial role in desorption.

Uncover the Aesthetic Simplicity Associated with Mass Transfer in Energy Materials

Aesthetics,referred frequently to as a philosophical term,has played a starring role in forming and evolving a number of aspects of human society,including arts,politics,economics,ethics,etc.Indeed,exploring and investigating the aesthetic phenomena in the scientific field have aroused insightful research findings,which in turn has stimulated research interests in such a science-aesthetics field.In particular,better-evaluated aesthetic aspects of the materials field are expected to be uncovered upon the exceedingly-exposed fundamental breakthroughs in researching the basic structure and functionality of materials.In this report,we glimpse into the aesthetic simplicity of energy materials and comprehend specifically the mass transfer functionalities of key categories of energy materials through an intuitive and bottom-up approach.Our effort aspires to shed new lights on the functionality understanding and manipulation of functional materials in general.

Early application of percutaneous neuromuscular electric stimulation in interfering motor function of limbs and difference in temperature of axilla of patients with ischemic stroke

BACKGROUND： Temperature of axilla could be affected due to motor dysfunction of limbs and neural changes of vessel after ischemic stroke. OBJECTIVE： To observe the effect of percutaneous neuromuscular electric stimulation （PNES） on difference in temperature of axilla and analyze the relationship between function of limbs and difference in temperature of axilla. DESIGN： Randomized grouping and controlled observation SETTING： Department of Neurology, General Hospital of Shenyang Military Area Command of Chinese PLA PARTICIPANTS： Sixty patients with ischemic stroke were selected from Neurological Department of General Hospital of Shenyang Military Area Command of Chinese PLA from January to June 2003. All cases were diagnosed with clinical diagnosis criteria of ischemic stroke established by the Fourth Chinese Classification of Cerebrovasular Disease and CT examination and received neuromuscular electric stimulation （NES）. Patients were randomly divided into control group and treatment group with 30 in each group. METHODS： Control group： Patients received routinely neurological therapy. Treatment group： Except routine therapy, patients suffered from NES at 48 hours after hospitalization. NMT-91 NES equipment was used to stimulated injured limbs with low frequency once 30 minutes a day in total of 10 times a course, especially extensor muscle of upper limb and flexor muscle of lower limb. Prescription of hemiplegia was internally decided by equipment with the output frequency of 200 Hz. Intensity of electric output could cause muscle contraction. The therapy needed two or three courses. Temperature of bilateral axilla was measured every day to calculate the difference with the formula of （temperature of axilla on the injured side - temperature of axilla on the healthy side）. Motor function of limbs was measured with FugI-Meyer Motor Assessment （FMA） during hospitalization and at 2 and 4 hours after hospitalization. Among 90 points, upper and lower limb function was 54, equilibrium function 10, sensory function 10, and motion of joint 16. The higher the scores were, the better the function was. Correlation of data was dealt with linear correlation analysis. MAIN OUTCOME MEASURES ： Assessment and correlation between difference in temperature of axilla and motor function of injured limbs during hospitalization and at 2 and 4 weeks after hospitalization. RESULTS： All 60 patients with ischemic stroke were involved in the final analysis. ① Difference in temperature： Difference of 2 and 4 weeks after hospitalization was lower than that in control group and at just hospitalization [treatment group： （0.056±0.000）, （0.024±0.003） ℃; control group： （0.250±0.001）, （0.131 ±0.001）℃; hospitalization; （0.513±0.001） ℃, P 〈 0.05-0,01]. ② FMA scores： Scores of 2 and 4 weeks after hospitalization were higher than those in control group and at just hospitalization [treatment group; （43.50±15.09）, （67.97 ±18.21） points; control group： （33.33 ±13.54）, （40.87±19.34） points; hospitalization： （26.43 ±11.87） points, P 〈 0.05-0.01]. ③ Correlation： Difference in temperature of axilla was negative correlation with FMA scores （c=- -0.255 1, P 〈 0.05）. CONCLUSION： ① PNES can accelerate recovery of limb function and decrease temperature of axilla of patients with ischemic stroke. ② The lower the difference in temperature is, the better the functional recovery is.

Common Information Model： A Bus Service for Electric Calculations in AES Eletropaulo

This paper resumes a research project developed in the concession area of AES Eletropaulo, the largest electrical energy distribution company in Brazil. First, the global standards of information exchange within power transmission and distribution area were evaluated, allowing the definition of state of the art on the theme, followed by determining its applications considering technologies already applied by the company. The specifications needed for the generation of a data integration model are adapted to radial overhead network at company concession area. The project developed an intermediary connectivity layer, based on the CIM （common information model）, which enables corporative systems to communicate in a standard way, through the use of integrating technologies. It, therefore, enabled modeling all main subjects of an electrical network in an open, extensible and non-proprietary way, in a model that contains classes and attributes of such subjects, as well as their relationships. Calculation and planning products adopted by the company were integrated to the technological layer implemented.