Cobalt and nitrogen atoms co-doped porous carbon for advanced electrical double-layer capacitors

Electrical double-layer capacitors are widely concerned for their high power density,long cycling life and high cycling efficiency.However,their wide application is limited by their low energy density.In this study,we propose a simple yet environmental friendly method to synthesize cobalt and nitrogen atoms co-doped porous carbon(CoAT-NC) material.Cobalt atoms connected with primarily pyridinic nitrogen atoms can be uniformly dispersed in the amorphous carbon matrix,which is benefit for improving electrical conductivity and density of states of the carbon material.Therefore,an enhanced perfo rmance is expected when CoAT-NC is served as electrode in a supercapacitor device.CoAT-NC displays a good gravimetric capacitance of 160 F/g at 0.5 A/g combing with outstanding capacitance retention of 90% at an extremely high current density of 100 A/g in acid electrolyte.Furthermore,a good energy density of 30 Wh/kg can be obtained in the organic electrolyte.

Porous monoliths of 3D graphene for electric double-layer supercapacitors

For delivering the nanoscaled extraordinary characteristics in macroscopical bulk,it is essential to integrate two-dimensional nanosheets into threedimensional(3D)porous monoliths,alternatively called as 3D architectures,3D networks,or aerogels.The intersupported structure of porous monolithic 3D graphene(3DG)can prevent aggregation or restacking of graphene individuals,and the interconnected sp^(2) network of 3DG not only can provide the highway for the transport of electron/phonon but also can present continual cavities/channels for mass transfer.This review summarizes the synthesis methodology of 3DG porous monoliths and highlights the application for electric double-layer capacitors.Present challenges and future prospects about the manufacture and application of 3DG are also discussed.

Carbon aerogels for electric double-layer capacitors

In this study, carbon aerogels were derived via the pyrolysis of resorcinol-formaldehyde (RF) aerogels, which were cost-effectively manufactured from RF wet gels by an ambient drying technique instead of conventional supercritical drying. By varying the R/C ratio (molar ratio of resorcinol to catalyst), mesoporous carbon aerogels with high specific surface area were prepared successfully and further investigated as electrode materials for electric double-layer capacitors (EDLCs). The textural properties of carbon aerogels obtained were characterized by nitrogen adsorption/desorption analysis and SEM. The electrochemical performances of carbon aerogels were investigated by impedance spectroscopy, galvanostatic charge/discharge and cyclic voltammetry methods. The results show that BET surface area and specific capacitance increase with R/C ratio, the maximum values of 727 m2·g-1 and 132 F·g-1 are achieved at R/C ratio will of 300. Increasing R/C ratio increase the average pore size of carbon aerogel electrode, which has improved the rate capability. Furthermore, EDLC with carbon aerogel electrodes has an excellent stability at large discharge current and long cycle life.

Characterization of Microporous Activated Carbon Electrodes for Electric Double-layer Capacitors

Activated carbons(ACs) with a wide range of surface areas were made from petroleum coke by means of KOH activation. The electrochemical characterization was carried out for several activated carbons used as polarizable electrodes of electric double-layer capacitors(EDLCs) in an aqueous electrolytic solution. The porous structures and electrochemical double-layer capacitance of the activated carbons were investigated by virtue of nitrogen gas adsorption and constant current cycling(CCC) methods. The relationship among the surface area, pore volume of the activated carbons and specific double-layer capacitance was discussed. It was found that the specific capacitance of ACs increased linearly with the increase of surface area. The presence of mesopores in the activated carbons with very high surface area(>2000 m\+2/g) was not very effective for them to be used as EDLCs. The influence of chemical characteristics of the activated carbons on the double layer formation could be considered to be negligible.

Aplication of Corncob-Based Activated Carbon as Electrode Material for Electric Double-Layer Capacitors

To investigate the influence of expansion pretreatment for materials on carbon structure, activated carbons （ACs） were prepared from corncob with/without expansion pretreatment by KOH activation, the structure properties of which were determined based on N2 adsorption isotherm at 77 K. The results show that the expansion pretreatment for corncobs is beneficial to the preparation of ACs with high surface area. The specific surface area of the AC derived from corncob with expansion pretreatment （AC-1） is 32.5% larger than that without expansion pretreatment （AC-2）. Furthermore, to probe the potential application of corncob-based ACs in electric double-layer capacitor （EDLC）, the prepared ACs were used as electrode materials to assemble EDLC, and its electrochemical performance was investi- gated. The results indicate that the specific capacitance of AC-I is 276 F/g at 50 mA/g, which increases by 27% com- pared with that of AC-2 （217 F/g）. As electrode materials, AC-1 presents a better electrochemical performance than AC-2, including a higher voltage maintenance ratio and a lower leakage current.

Chemical Treatment of Carbon Nanotubes as Electrodes in Electrochemical Double-Layer Capacitors

Multi-walled carbon nanombes with homogeneous diameters （40 - 60 nm）, produced by chemical vapor deposition of hydrocarbon gas, are purified by nitric acids. Infrared and Raman studies indicate that oxygen containing surface groups, which are predominately carboxylic, phenolic and lactonic groups, are introduced into purified carbon nanotubes. Then three kinds of block-form porous tablets of carbon nanotubes are fabricated as electrodes in electrochemical double-layer capacitors. Using mounded mixture comprising carbon nanotubes and binder powders provides these tablets. Comparison of the effect of different processing on the structural performance of the capacitors is specifically investigated. Using chemically treated electrodes, electrochemical double-layer capacitors with a specific capacitance of about 33 F/g are obtained with 38 wt % H2SO4 as the electrolyte.

Adsorption of K^+ from an aqueous phase onto an activated carbon used as an electric double-layer capacitor electrode

The adsorption capacity and absorption rate for electrolyte onto activated carbon are important parameters used to characterize activated carbon electric double-layer capacitor electrodes. In this paper the pore structure of typical commercial activated carbons, and various Mn-doped activated carbons prepared on a laboratory scale, are described. The pore structure was character-ized by N2 adsorption/desorption isotherms. Isotherms for K+ adsorption onto these activated carbons from the aqueous phase were also obtained. The experimental, equilibrium K+ adsorption data were fitted to the Langmuir, Freundlich or Temkin equations. Adsorption of K+ onto the activated carbons was measured and plotted as a function of time. The adsorption kinetic data were modeled by either pseudo-first or pseudo-second order equations. The Elvoich equation, a liquid film diffusion and an intra-particle diffusion model were used to fit the kinetic data. The results indicate that the adsorption of K+ onto activated carbon is influenced by many factors including pore size distribution, specific surface area and the surface chemistry of the activated carbons. The Temkin equation best describes the equilibrium adsorption data. The pseudo-second order model exactly describes the whole adsorption process, which is controlled by both liquid film and intra-particle diffusion.

Preparation of spiro-type quaternary ammonium salt via economical and efficient synthetic route as electrolyte for electric double-layer capacitor

A spiro-type quaternary ammonium salt, spiro-(1,1′)-bipyrrolidinium tetrafluoroborate(SBP-BF4) was successfully prepared by an economical and efficient three-step process comprising the cyclization reaction of 1,4-dibromobutane and pyrrolidine, and subsequent ion exchange pathway with KOH followed by neutralization reaction via HBF4 in the system of ethanol solution. 1H NMR, 13 C NMR, FI-IR and XPS analyses showed the structure of SBP-BF4. The as-obtained SBP-BF4 was dissolved in AN and used as the electrolyte for supercapacitor. Electrochemical measurements demonstrate that, compared with commercial electrolyte TEMA-BF4/AN, SBP-BF4/AN exhibits high ionic conductivity, lower resistance and improved cycling performance, which is due to its smaller ion size and stable symmetry structure.

Application of Nanofiber Fabricated by Cotton Candy Method to Electric Double-Layer Capacitor

In recent years, application of carbon-based nano material to electrode material has been paid attention, however, due to its higher cost, it would be difficult to put it into practical use. Then, we have proposed to make nano carbon fiber with lower production cost. The purpose of our research was, to apply our nano carbon fiber to electrical double-layer capacitor electrode. We used cotton candy method to make nano fiber, and applied microwave heating for carbonization. By applying nano carbon fiber to electrical double-layer capacitor electrode, we got results that thicker electrode containing nano carbon fiber leads to lower resistance value, compared with electrode without containing nano carbon fiber. From this result, it was indicated that by containing nano carbon fiber, the electric bypass was formed in the electrode.

Electrical Shorting between the Carbon-Fiber Cloth Electrodes of Structural Capacitors with a Glass-Fiber Cloth Separator

Multifunctional composites that have the ability to store or generate energy have attracted huge attention recently. One type of multifunctional composite is a structural capacitor that uses carbon fiber cloth as electrodes separated by glass-fiber cloth. However, such structural capacitors are difficult to fabricate reliably because electrical shorts sometimes form between the electrodes. In the present study, we investigate the mechanism of electrical shorting in such capacitors, which allows us to propose an improved fabrication process to prevent electrical shorting between the carbon-cloth electrodes. Infrared thermography reveals that electrical shorting between the electrodes is caused by contact between the carbon-fiber electrodes. Such contacts are formed by movement of the glass fibers of the separator during curing, which is induced by epoxy resin flow. Pre-curing of the glass-fiber cloth separator to a suitable degree ensures that the electrical insulation between carbon-fiber electrodes is reliable.

Candidate organic electrolytes for electric double-layer capacitor application

Electrolytic conductivity, viscosity and electrochemical behavior were investigated for organic electrolytes based on PC（Propylene carbonate）, MAN（Methoxy acetonitrile） and GBL（γ-Butyrolactone） solvents. It was found that 1 mol/L Et4NBF4-MAN had the highest conductivity, lowest viscosity and acceptable potential window. The specific capacitance and energy density obtained from the capacitor using 1 mol/L Et4NBF4-MAN as electrolyte were the highest among all the tested electrolytes.（1 mol/L） Et4NBF4-GBL also seemed promising to be used in electric double-layer capacitor （EDLCs）.

Electrical Characteristics of Super Capacitors Using KOH Gel

Despite aqueous electrolytes having a low cost and excellent ionic conductivity,their low withstand voltage of 1.2 V makes them problematic for battery utility because that is a very important factor in battery production.In this research,the possibility of increasing the withstand voltage while maintaining the low cost of aqueous electrolytes was investigated.In this research,the solution electrolyte was made into a viscous solid polymer electrolyte to improve the withstand voltage of the electrolyte.A solid polymer electrolyte was made from sodium polyacrylate and doped with KOH(potassium hydroxide)and pure water.The improvement of the withstand voltage was evaluated by the specific capacitance.

Raman probing carbon&aqueous electrolytes interfaces and molecular dynamics simulations towards understanding electrochemical properties under polarization conditions in supercapacitors

Raman probing of carbon electrode and electrolyte under dynamic conditions is performed here using different aqueous electrolytes to elucidate the fundamental events occurring in electrochemical supercapacitor during charge–discharge processes.The areal capacitance ranges from 1.54 to 2.31μF cm^(-2)μm and it is determined using different techniques.These findings indicate that the Helmholtz capacitance governs the overall charge-storage process instead of the space charge(quantum)capacitance commonly verified for HOPG electrodes in the range of~3 to 7μF cm^(-2).Molecular dynamics simulations are employed to elucidate the origin of the reversible Raman spectral changes during the charge–discharge processes.A correlation is verified between the reversible Raman shift and the surface excesses of the different ionic species.A theoretical framework is presented to relate the effect of the applied potential on the Raman shift and its correlation with the surface ionic charge.It is proposed that the Raman shift is governed by the interaction of solvated cations with graphite promoted by polarization conditions.It is the first time that a comparative study on different aqueous electrolyte p H and cation ion size has been performed tracking the Raman spectra change under dynamic polarization conditions and contrasting with comprehensive electrochemistry and dynamic molecular simulations studies.This study shines lights onto the charge-storage mechanism with evidence of Kohn anomaly reduction in the carbon electrode during the reversible adsorption/desorption and insertion/extraction of ionic species.

High Density 3D Carbon Tube Nanoarray Electrode Boosting the Capacitance of Filter Capacitor

Electric double-layer capacitors(EDLCs)with fast frequency response are regarded as small-scale alternatives to the commercial bulky aluminum electrolytic capacitors.Creating carbon-based nanoarray electrodes with precise alignment and smooth ion channels is crucial for enhancing EDLCs’performance.However,controlling the density of macropore-dominated nanoarray electrodes poses challenges in boosting the capacitance of line-filtering EDLCs.Herein,a simple technique to finely adjust the vertical-pore diameter and inter-spacing in three-dimensional nanoporous anodic aluminum oxide(3D-AAO)template is achieved,and 3D compactly arranged carbon tube(3D-CACT)nanoarrays are created as electrodes for symmetrical EDLCs using nanoporous 3D-AAO template-assisted chemical vapor deposition of carbon.The 3D-CACT electrodes demonstrate a high surface area of 253.0 m^(2) g^(−1),a D/G band intensity ratio of 0.94,and a C/O atomic ratio of 8.As a result,the high-density 3D-CT nanoarray-based sandwich-type EDLCs demonstrate a record high specific areal capacitance of 3.23 mF cm^(-2) at 120 Hz and exceptional fast frequency response due to the vertically aligned and highly ordered nanoarray of closely packed CT units.The 3D-CT nanoarray electrode-based EDLCs could serve as line filters in integrated circuits,aiding power system miniaturization.

Mitigating self-discharge of carbon-based electrochemical capacitors by modifying their electric-double layer to maximize energy efficiency

Self-discharge is a significant issue in electric double layer energy storage, which leads to a rapid voltage drop and low energy efficiency. Here, we attempt to solve this problem by changing the structure of the electric double layer into a de-solvated state, by constructing a nano-scale and ion-conductive solid electrolyte layer on the surface of a carbon electrode. The ion concentration gradient and potential field that drive the self-discharge are greatly restricted inside this electric double layer. Based on this understanding, a high-efficiency graphene-based lithium ion capacitor was built up, in which the self-discharge rate is reduced by 50% and the energy efficiency is doubled. The capacitor also has a high energy density, high power output and long life, and shows promise for practical applications.

Empirical formulae for electric double-layer repulsion between two arbitrarily inclined clay particles

To understand the mesoscopic mechanism of clayey soil in view of macroscopic behavior, it is essential to quantitatively calculate the electric double-layer repulsion between arbitrarily inclined clay particles.However, suitable calculation methods with high efficiency and accuracy are still rare at present in literature. Based on a great number of numerical calculations of the repulsion between two inclined platy clay particles, explicit empirical formulae for estimating electric double-layer repulsion between clay particles are put forward. Comparison between the empirical solutions and corresponding numerical results shows that the proposed formulae have a reasonable accuracy, and application of the presented formula is easy and efficient.

Advances in in-situ characterizations of electrode materials for better supercapacitors

In past decades,the performance of supercapacitors has been greatly improved by rationalizing the electrode materials at the nanoscale.However,there is still a lack of understanding on how the charges are efficiently stored in the electrodes or transported across the electrolyte/electrode interface.As it is very challenging to investigate the ion-involved physical and chemical processes with single experiment or computation,combining advanced analytic techniques with electrochemical measurements,i.e.,developing in-situ characterizations,have shown considerable prospect for the better understanding of behaviors of ions in electrodes for supercapacitors.Herein,we briefly review several typical in-situ techniques and the mechanisms these techniques reveal in charge storage mechanisms specifically in supercapacitors.Possible strategies for designing better electrode materials are also discussed.

The key challenges and future opportunities of electrochemical capacitors

Electrochemical capacitors(ECs)with unique merits of fast charge/discharge rate and long cyclability are one of the representative electrochemical energy storage systems,possessing wide applications in power electronics and automotive transportation,etc.[1,2].Furthermore.

Tuning the phase separation in La_(0.325)Pr_(0.3)Ca_(0.375)MnO_3 using the electric double-layer field effect

Electric double-layer field effect experiments were performed on ultrathin films of La0.325Pr0.3Ca0.375MnO3, which is noted for its micrometer-scale phase separation. A clear change of resistance up to 220% was observed and the characteristic metal-insulator transition temperature Tp was also shifted. The changes of both the resistance and Tp, suggest that the electric field induced not only tuning of the carrier density but also rebalancing of the phase separation states. The change of the charge-ordered insulating phase fraction was estimated to be temperature dependent, and a maximum of 16% was achieved in the phase separation regime. This tuning effect was partially irreversible, which might be due to an oxygen vacancy migration that is driven by the huge applied electric field.

Influence of polyethylene glycol on pore structure and electric double-layer capacitance of carbon xerogel

Mesoporous polyethylene glycol-resorcinol and formaldehyde（PEG-RF） carbon xerogels were prepared by a new polymer blend method in which PEG-RF mixed organic xerogels were synthesized by blending thermally unstable polyethylene glycol with organic monomers, resorcinol and formaldehyde and then subjected to pyrolization at 1 000 ℃. The influences of mass ratio of PEG to the theoretical yield of RF xerogel, m（PEG）/m（RF） and the （relative） molecular mass of PEG on the pore structure and electric double layer capacitance（EDLC） performance of PEG-RF carbon xerogels were investigated. The results show that PEG under different conditions leads to the difference of phase separation structure of the polymer blend and thus the change of pore structure of PEG-RF carbon xerogels. Specific surface area and capacity of PEG-RF carbon xerogels in 30% H2SO4 solution can reach （755 m2/g） and 150 F/g, respectively. Their surface can be fully utilized to form electric double layer. However, the pore structure differences of PEG-RF carbon xerogels result in their different EDLC performances. The distributed capacitance effect increases with decreasing the pore size of PEG-RF carbon xerogels.