Simulation and Analysis of Cascading Faults in Integrated Heat and Electricity Systems Considering Degradation Characteristics

Cascading faults have been identified as the primary cause of multiple power outages in recent years.With the emergence of integrated energy systems(IES),the conventional approach to analyzing power grid cascading faults is no longer appropriate.A cascading fault analysis method considering multi-energy coupling characteristics is of vital importance.In this study,an innovative analysis method for cascading faults in integrated heat and electricity systems(IHES)is proposed.It considers the degradation characteristics of transmission and energy supply com-ponents in the system to address the impact of component aging on cascading faults.Firstly,degradation models for the current carrying capacity of transmission lines,the water carrying capacity and insulation performance of thermal pipelines,as well as the performance of energy supply equipment during aging,are developed.Secondly,a simulation process for cascading faults in the IHES is proposed.It utilizes an overload-dominated development model to predict the propagation path of cascading faults while also considering network islanding,electric-heating rescheduling,and load shedding.The propagation of cascading faults is reflected in the form of fault chains.Finally,the results of cascading faults under different aging levels are analyzed through numerical examples,thereby verifying the effectiveness and rationality of the proposed model and method.

Optimal Operation of Integrated Heat and Electricity Systems:A Tightening McCormick Approach

Combined heat and electricity operation with variable mass flow rates promotes flexibility,economy,and sustainability through synergies between electric power systems(EPSs)and district heating systems(DHSs).Such combined operation presents a highly nonlinear and nonconvex optimization problem,mainly due to the bilinear terms in the heat flow model—that is,the product of the mass flow rate and the nodal temperature.Existing methods,such as nonlinear optimization,generalized Benders decomposition,and convex relaxation,still present challenges in achieving a satisfactory performance in terms of solution quality and computational efficiency.To resolve this problem,we herein first reformulate the district heating network model through an equivalent transformation and variable substitution.The reformulated model has only one set of nonconvex constraints with reduced bilinear terms,and the remaining constraints are linear.Such a reformulation not only ensures optimality,but also accelerates the solving process.To relax the remaining bilinear constraints,we then apply McCormick envelopes and obtain an objective lower bound of the reformulated model.To improve the quality of the McCormick relaxation,we employ a piecewise McCormick technique that partitions the domain of one of the variables of the bilinear terms into several disjoint regions in order to derive strengthened lower and upper bounds of the partitioned variables.We propose a heuristic tightening method to further constrict the strengthened bounds derived from the piecewise McCormick technique and recover a nearby feasible solution.Case studies show that,compared with the interior point method and the method implemented in a global bilinear solver,the proposed tightening McCormick method quickly solves the heat–electricity operation problem with an acceptable feasibility check and optimality.

Observability Analysis of Integrated Electricity and Heating Systems with Thermal Quasi-dynamics in Pipelines

Observability analysis(OA)is vital to obtaining the available input measurements of state estimation(SE)in an integrated electricity and heating system(IEHS).Considering the thermal quasi-dynamics in pipelines,the measurement equations in heating systems are dependent on the estimated results,leading to an interdependency between OA and SE.Conventional OA methods require measurement equations be known exactly before SE is performed,and they are not applicable to IEHSs.To bridge this gap,a scenario-based OA scheme for IEHSs is devised that yields reliable analysis results for a predefined set of time-delay scenarios to cope with this interdependency.As its core procedure,the observable state identification and observability restoration are formulated in terms of integer linear programming.Numerical tests are conducted to demonstrate the validity and superiority of the proposed formulation.

Real-time Risk-averse Dispatch of an Integrated Electricity and Natural Gas System via Condi-tional Value-at-risk-based Lookup-table Ap-proximate Dynamic Programming

The real-time risk-averse dispatch problem of an integrated electricity and natural gas system(IEGS)is studied in this paper.It is formulated as a real-time conditional value-at-risk(CVaR)-based risk-averse dis-patch model in the Markov decision process framework.Because of its stochasticity,nonconvexity and nonlinearity,the model is difficult to analyze by traditional algorithms in an acceptable time.To address this non-deterministic polynomial-hard problem,a CVaR-based lookup-table approximate dynamic programming(CVaR-ADP)algo-rithm is proposed,and the risk-averse dispatch problem is decoupled into a series of tractable subproblems.The line pack is used as the state variable to describe the impact of one period’s decision on the future.This facilitates the reduction of load shedding and wind power curtailment.Through the proposed method,real-time decisions can be made according to the current information,while the value functions can be used to overview the whole opti-mization horizon to balance the current cost and future risk loss.Numerical simulations indicate that the pro-posed method can effectively measure and control the risk costs in extreme scenarios.Moreover,the decisions can be made within 10 s,which meets the requirement of the real-time dispatch of an IEGS.Index Terms—Integrated electricity and natural gas system,approximate dynamic programming,real-time dispatch,risk-averse,conditional value-at-risk.

Electrically and Optically Bistable Operation in an Integration of a 1310 nm DFB Laser and a Tunneling Diode

We experimentally demonstrate an In P-based hybrid integration of a single-mode DFB laser emitting at around 1310 nm and a tunneling diode. The evident negative differential resistance regions are obtained in both electrical and optical output characteristics. The electrical and optical bistabilities controlled by the voltage through the tunneling diode are also measured. When the voltage changes between 1.46 V and 1.66 V, a 200-mV-wide hysteresis loop and an optical power ON/OFF ratio of 17 dB are obtained. A side-mode suppression ratio of the integrated device in the ON state is up to 43 dB. The tunneling diode can switch on/off the laser within a very small voltage range compared with that directly controlled by a voltage source.

Reliability Assessment of Integrated Electricity and Natural Gas Transmission Systems in Presence of Power-to-gas and Combined Heat and Power Technologies

Assessing the reliability of integrated electricity and gas systems has become an important issue due to the strong dependence of these energy networks through the power-to-gas(P2G)and combined heat and power(CHP)technologies.The current work,initially,presents a detailed energy flow model for the integrated power and natural gas system in light of the P2G and CHP technologies.Considering the simultaneous load flow of networks,a contingency analysis procedure is proposed,and reliability is assessed through sequential Monte Carlo simulations.The current study examines the effect of independent and dependent operation of energy networks on the reliability of the systems.In particular,the effect of employing both P2G and CHP technologies on reliability criteria is evaluated.In addition,a series of sensitivity analysis are performed on the size and site of these technologies to investigate their effects on system reliability.The proposed method is implemented on an integrated IEEE 24-bus electrical power system and 20-node Belgian natural gas system.The simulation procedure certifies the proposed method for reliability assessment is practical and applicable.In addition,the results prove connection between energy networks through P2G and CHP technologies can improve reliability of networks if the site and size of technologies are properly determined.

Quasi-dynamic Interactions and Security Control of Integrated Electricity and Heating Systems in Normal Operations

Coupling between electricity systems and heating systems are becoming stronger,leading to more flexible and more complex interactions between these systems.The operation of integrated energy systems is greatly affected,especially when security is concerned.Steady-state analysis methods have been widely studied in recent research,which is far from enough when the slow thermal dynamics of heating networks are introduced.Therefore,an integrated quasi-dynamic model of integrated electricity and heating systems is developed.The model combines a heating network dynamic thermal model and the sequential steady-state models of electricity networks,coupling components,and heating network hydraulics.Based on this model,a simulation method is proposed and quasi-dynamic interactions between electricity systems and heating systems are quantified with the highlights of transport delay.Then the quasi-dynamic interactions were applied using security control to relieve congestion in electricity systems.Results show that both the transport delay and control strategies have significant influences on the quasi-dynamic interactions.

Cascading Failure Propagation Simulation in Integrated Electricity and Natural Gas Systems

The sharp increase in the total installed capacity of natural gas generators has intensified the dynamic interaction between the electricity and natural gas systems,which could induce cascading failure propagation across the two systems that deserves intensive research.Considering the distinct time response behaviors of the two systems,this paper discusses an integrated simulation approach to simulate the cascading failure propagation process of integrated electricity and natural gas systems(IEGSs).On one hand,considering instantaneous re-distribution of power flows after the occurrence of disturbance or failure,the steady-state AC power flow model is employed.On the other hand,gas transmission dynamics are represented by dynamic model to capture the details of its transition process.The interactions between the two systems,intensified by energy coupling components(such as gas-fired generator and electricity-driven gas compressor)as well as the switching among the operation modes of compressors during the cascading failure propagation process,are studied.An IEGS composed of the IEEE 30-bus electricity system and a 14-node 15-pipeline gas system is established to illustrate the effectiveness of the proposed simulation approach,in which two energy sub-systems are coupled by compressor and gas-fired generator.Numerical results clearly demonstrate that heterogeneous interactions between electricity and gas systems would trigger the cascading failure propagation between the two coupling systems.

Stochastic Dynamic Economic Dispatch of Wind-integrated Electricity and Natural Gas Systems Considering Security Risk Constraints

As the proportion of wind power generation increases in power systems,it is necessary to develop new ways for wind power accommodation and improve the existing power dispatch model.The power-to-gas technology,which offers a new approach to accommodate surplus wind power,is an excellent way to solve the former.Hence,this paper proposes to involve power-to-gas technology in the integrated electricity and natural gas systems(IEGSs).To solve the latter,on one hand,a new indicator,the scale factor of wind power integration,is introduced into the wind power stochastic model to better describe the uncertainty of grid-connected wind power;on the other hand,for quantizing and minimizing the impact of the uncertainties of wind power and system loads on system security,security risk constraints are established for the IEGS by the conditional value-at-risk method.By considering these two aspects,an MILP formulation of a security-risk based stochastic dynamic economic dispatch model for an IEGS is established,and GUROBI obtained from GAMS is used for the solution.Case studies are conducted on an IEGS consisting of a modified IEEE 39-bus system and the Belgium 20-node natural gas system to examine the effectiveness of the proposed dispatch model.

Optimal Energy Reserve Scheduling in Integrated Electricity and Gas Systems Considering Reliability Requirements

With the growing interdependence between the electricity system and the natural gas system,the operation uncertainties in either subsystem,such as wind fluctuations or component failures,could have a magnified impact on the reliability of the whole system due to energy interactions.A joint reserve scheduling model considering the cross-sectorial impacts of operation uncertainties is essential but still insufficient to guarantee the reliable operation of the integrated electricity and natural gas system(IEGS).Therefore,this paper proposes a day-ahead security-constrained unit commitment(SCUC)model for the IEGS to schedule the operation and reserve simultaneously considering reliability requirements.Firstly,the multi-state models for generating units and gas wells are established.Based on the multi-state models,the expected unserved energy cost(EUEC)and the expected wind curtailment cost(EWC)criteria are proposed based on probabilistic methods considering wind fluctuation and random failures of components in IEGS.Furthermore,the EUEC and EWC criteria are incorporated into the day-ahead SCUC model,which is nonconvex and mathematically reformulated into a solvable mixed-integer second-order cone programming(MISOCP)problem.The proposed model is validated using an IEEE 30-bus system and Belgium 20-node natural gas system.Numerical results demonstrate that the proposed model can effectively schedule the energy reserve to guarantee the reliable operation of the IEGS considering the multiple uncertainties in different subsystems and the cross-sectorial failure propagation.

A Hybrid State Estimation Approach for Integrated Heat and Electricity Networks Considering Time-scale Characteristics

State estimation(SE)usually serves as the basic function of the energy management system(EMS).In this paper,the time-scale characteristics of the integrated heat and electricity networks are studied and an SE model is established.Then,a two-stage iterative algorithm is proposed to estimate the time delay of heat power transportation in the pipeline.Meanwhile,to accommodate the measuring resolutions of the integrated network,a hybrid SE approach is developed based on the two-stage iterative algorithm.Results show that,in both steady and dynamic processes,the two-stage estimator has good accuracy and convergence.The hybrid estimator has good performance on tracking the variation of the states in the heating network,even when the available measurements are limited.

Review of Middle East energy interconnection development

In recent years,the Middle East region countries have experienced rapid population and economy growth,which has resulted in large increase of energy and power demand.Although the traditional fossil fuels remain the majority for supplying the domestic demand,additional generating capacity and fuel supply are necessary according to current situation and future demand forecast.The renewable energy provides an alternative resource for satisfying demand,especially in this region with high potential of solar and wind energy.Besides the development of renewable energy,interconnected electricity networks also enable the cross-border power exchange to fulfil electricity demand.Many Middle East countries have already started developing renewable energy and reforming the national power sector for regional electricityintegration.However,none of them has already implemented their targets and the challenges are still huge.This study reviews current conditions of electricity and energy interconnection development,and analyzes the process of regional electricity network integration and national power sector reforms and provides suggestion for regions’plan.Finally,the technology developments for future power grid interconnection and renewable energy integration are also reviewed.

Heat Pumps in Denmark:Current Situation in Providing Frequency Control Ancillary Services

-The Danish government set an ambitious goal to achieve a fully renewable-based energy system by 2050.In this context,the integrated electricity and heating system is undergoing rapid development in Denmark as a promising way to accommodate the ever-growing renewable energy sources(RESs).The electric heat pumps(HPs),coupled with the power and heat sectors,can propagate the flexibility on the heat consumer side to the power system operations,playing an important role of improving system flexibility and balancing the variability of the RES.In this paper,the current development situation of HPs in Denmark is analyzed,including both the large-scale HPs in the district heating system and individual HPs on the residential side.The possibility of using HPs to provide frequency control ancillary service(FCAS)is analyzed according to the market and technical requirements of the FCAS in the Danish transmission system and experimental results of representative demonstration projects of HPs.A comprehensive analysis of the advantages,barriers,future prospects,and challenges for using HPs to provide the FCAS are carried out from the perspectives of different entities.