A new method of electric energy metering considering harmonic responsibility

Aiming at the shortcomings of the existing electric energy metering method,combining with the harmonic responsibility analysis model based on the reference impedance method and the idea of apparent power decomposition in IEEE Std 1459-2010 standard,two new metering indicators—billing active power and billing power factor are defined.A new electric energy metering method is proposed and its specific implementation steps are given.The simulation model is built in Matlab/Simulink,and three different examples are set up.Using the simulation data,the various metering indicators need to be examined by the existing electric energy metering method and the new electric energy metering method are calculated.The calculation results show that the new electric energy metering method not only overcomes the shortcomings of the existing electric energy metering method,but also is very easy to be popularized and applied.

Costs and Benefits of Smart Grids on Liberalized Markets

The discussion about smart grid （SG） implementation is mostly focused on pilot projects. These projects are necessary for mapping of particular technical devices of advanced metering management （AMM） which is needed for successful SG and whole functional SG system operation. According to our opinion, for the next step of SG implementation, the participation of effective market design would be quite necessary. In other words, pilot project which is operated regardless to the market conditions and special SG tariff is incomplete and could be irrelevant for further evaluation of feasibility. With regard to above mentioned facts, the detailed cost-benefit-analysis （CBA） is needed to establish the correct methodology for evaluation of SG implementation effectiveness. Related aspects are mentioned and discussed in this paper, in which the particular cost and benefits as well as feedback that occurs as the reaction on implementation are summarized and quantified.

Use of online electrical conductivity meter to monitor cold decomposition of carnallite

Online control of the ratio of carnallite to water is a key to achieve a fully continuous and automatic potash produc tion. By monitoring carnallite cold decomposition process using online conductivity meter, the relationship between the conduc tivity and the control parameters was analyzed based on the data collected online. The results show that the conductivity regu larly varies with a general trend of decrease after an initial increase when the ratio of mineral to water is adjusted. There are certain rules satisfying cubic polynomial regression equation. When the ratio of mineral to water is larger than 0. 6, with the a mount of carnallite increased by 10%, the conductivity decreases by 0. 28%-0. 45% accordingly and the relative deviation is less than 0. 5%. The value of electrical conductivity has stabilized when the density of liquid increased to 1.27 g/cm3, namely, the solution reaches saturation. It has proved that the methods can be employed for online monitoring the ratio of carnallite to water during carnallite cold decomposition and the precise control has an important value for reference and application.

Research on the Recognition Method of Electric Energy Meter Lead Title based on the Fuzzy Image Processing

This article puts forward an automatic recognition algorithm of electric energy meter lead seals： firstly, the image will be histogram equalization, smoothing, binaryzation pretreatment, then according to the image characteristics of text changes, the system can quickly and accurately segment image from complex background, finally the system extract different dimension and the feature of English and Arabia using digital projection transform coefficient method and to identify the corresponding number by BP neural network, solves the problem of automatic recognition of electric energy meter lead sealing.

Consistency analysis of accelerated degradation mechanism based on gray theory

A fundamental premise of an accelerated testing is that the failure mechanism under elevated and normal stress levels should remain the same. Thus, verification of the consistency of failure mechanisms is essential during an accelerated testing. A new consistency analysis method based on the gray theory is pro- posed for complex products. First of all, existing consistency ana- lysis methods are reviewed with a focus on the comparison of the differences among them. Then, the proposed consistency ana- lysis method is introduced. Two effective gray prediction models, gray dynamic model and new information and equal dimensional （NIED） model, are adapted in the proposed method. The process to determine the dimension of NIED model is also discussed, and a decision rule is expanded. Based on that, the procedure of ap- plying the new consistent analysis method is developed. Finally, a case study of the consistency analysis of a reliability enhancement testing is conducted to demonstrate and validate the proposed method.

Research on Intelligent Power Management System for Student Dormitory based on CAN Bus

This paper analyzes the actual situation of the electricity management about student apartments, and design intelligent energy student housing management system based on CAN bus. The system uses the field level, the underlying management level and upper management level three management system. Field level with a dedicated energy metering chip AD7755 and STM32F103 microcontroller with A/D conversion function as the core, to achieve real-time power measurement; via CAN bus timing or random read live energy data for monitoring electricity consumption of the apartment, investigate abnormal electricity, thus effectively limiting the students to use electrical power to achieve the modernization and automation of power management solutions student apartments.

Design of PLC Centralized Meter Reading System

With the increasing development of urban housing construction and the rapid expansion of the number of inhabitants and independent electric energy meter, a variety of tariff systems are launched, meter reading metering becomes increasingly complex, and the traditional manual meter reading is already hard to adapt to new changes. This thesis studies the design of a centralized meter reading system. This program applies PLC technology for information transfer, which guarantees the stability of system carrier communication. This system is composed of electric energy meter, collector, concentrator and other hardware, as well as communication and management software of collection copies system. It is characterized by functions of power data collection, centralization, remote transmission, distance control, electricity analysis, line loss calculation, integrated query, and time-sharing billing. Its promotion and application will necessarily provide important technical means for power supply, property and urban utilities to improve their modernized and automatic management level.

Training Load Monitoring Algorithms on Highly Sub-Metered Home Electricity Consumption Data

The growing interest in energy-efficient buildings is driving changes in investment, design, and occupant behavior. To better focus cost and resource conservation efforts, electricity consumption feedback can be used to provide motivation, guidance, and verification. Disaggregating by end-use helps both consumers and producers to identify targets for conservation. While hardware-based sub-metering is costly and labor-intensive, non-intrusive load monitoring (NILM) is capable of gathering detailed energy-use data with minimal equipment cost and installation time. However, variations in measurements between metering devices complicate the process of compiling the necessary appliance profiles. Future work involves the devel-opment of NILM algorithms using sensor fusion and detailed appliance-level data gathered from a highly-sensed house currently being constructed near Pittsburgh, Pennsylvania.

Planting uniformity performance of motor-driven maize precision seeding systems

Low accuracy planting uniformity affects yield.Seed meter type and forward speed typically interfere with the planting uniformity accuracy of motor-driven seeding systems.Two types of maize precision planters equipped with motor-driven planting systems are investigated in this study to ascertain the rule of planting uniformity in both simulated and field speeds.The simulated speed increases from 5 to 12 km/h at a 1 km/h interval in a laboratory environment.The test results show that the quality of feed index(QTFI)of the two planters decreased by 16.79%and 9.88%.This is primarily attributed to the increase in the miss index(MISS)by 11.62%and 9.70%,respectively.The field speed was set to four levels from 5 to 12 km/h in a field environment.The plant spacing scatter distribution results were analyzed,and the results of the two planters indicated that the average positive difference of the two planters linearly increased with the forward speed,and the negative difference of the two planters did not exhibit a linear correlation.The number of positive moving average points was 2.49 times greater than that of the negative moving average points of the finger pick-up maize precision planter,and 4.49 times in the air-suction maize precision planter.The results indicated that the increase of the positive difference of plant spacing is the major effect factor in the field planting uniformity of the two motor-driven maize precision planters.In addition,the plant spacing corresponded to the distribution frequency of the two planters in field was close to the target seed spacing of 25 cm with a max coefficient of variation(CV)of 21.55%and 20.66%,respectively,and those plant spacing values corresponded to max distribution frequency of the two planters at the four level field speeds were(24.69±0.63)cm and(25.63±0.32)cm,respectively.However,the multiples index(MUL)changed randomly affected by the increasing speed.The research results provide a direction for the optimization design of motor-driven maize precision planters.