Inter‑Skeleton Conductive Routes Tuning Multifunctional Conductive Foam for Electromagnetic Interference Shielding,Sensing and Thermal Management

Conductive polymer foam(CPF)with excellent compressibility and variable resistance has promising applications in electromagnetic interference(EMI)shielding and other integrated functions for wearable electronics.However,its insufficient change amplitude of resistance with compressive strain generally leads to a degradation of shielding performance during deformation.Here,an innovative loading strategy of conductive materials on polymer foam is proposed to significantly increase the contact probability and contact area of conductive components under compression.Unique inter-skeleton conductive films are constructed by loading alginate-decorated magnetic liquid metal on the polymethacrylate films hanged between the foam skeleton(denoted as AMLM-PM foam).Traditional point contact between conductive skeletons under compression is upgraded to planar contact between conductive films.Therefore,the resistance change of AMLM-PM reaches four orders of magnitude under compression.Moreover,the inter-skeleton conductive films can improve the mechanical strength of foam,prevent the leakage of liquid metal and increase the scattering area of EM wave.AMLM-PM foam has strain-adaptive EMI shielding performance and shows compression-enhanced shielding effectiveness,solving the problem of traditional CPFs upon compression.The upgrade of resistance response also enables foam to achieve sensitive pressure sensing over a wide pressure range and compression-regulated Joule heating function.

Flexible, Transparent and Conductive Metal Mesh Films with Ultra‑High FoM for Stretchable Heating and Electromagnetic Interference Shielding

Despite the growing demand for transparent conductive films in smart and wearable electronics for electromagnetic interference(EMI)shielding,achieving a flexible EMI shielding film,while maintaining a high transmittance remains a significant challenge.Herein,a flexible,transparent,and conductive copper(Cu)metal mesh film for EMI shielding is fabricated by self-forming crackle template method and electroplating technique.The Cu mesh film shows an ultra-low sheet resistance(0.18Ω□^(-1)),high transmittance(85.8%@550 nm),and ultra-high figure of merit(>13,000).It also has satisfactory stretchability and mechanical stability,with a resistance increases of only 1.3%after 1,000 bending cycles.As a stretchable heater(ε>30%),the saturation temperature of the film can reach over 110°C within 60 s at 1.00 V applied voltage.Moreover,the metal mesh film exhibits outstanding average EMI shielding effectiveness of 40.4 dB in the X-band at the thickness of 2.5μm.As a demonstration,it is used as a transparent window for shielding the wireless communication electromagnetic waves.Therefore,the flexible and transparent conductive Cu mesh film proposed in this work provides a promising candidate for the next-generation EMI shielding applications.

Liquid Metal Grid Patterned Thin Film Devices Toward Absorption‑Dominant and Strain‑Tunable Electromagnetic Interference Shielding

The demand of high-performance thin-film-shaped deformable electromagnetic interference(EMI)shielding devices is increasing for the next generation of wearable and miniaturized soft electronics.Although highly reflective conductive materials can effectively shield EMI,they prevent deformation of the devices owing to rigidity and generate secondary electromagnetic pollution simultaneously.Herein,soft and stretchable EMI shielding thin film devices with absorption-dominant EMI shielding behavior is presented.The devices consist of liquid metal(LM)layer and LM grid-patterned layer separated by a thin elastomeric film,fabricated by leveraging superior adhesion of aerosol-deposited LM on elastomer.The devices demonstrate high electromagnetic shielding effectiveness(SE)(SE_(T) of up to 75 dB)with low reflectance(SER of 1.5 dB at the resonant frequency)owing to EMI absorption induced by multiple internal reflection generated in the LM grid architectures.Remarkably,the excellent stretchability of the LM-based devices facilitates tunable EMI shielding abilities through grid space adjustment upon strain(resonant frequency shift from 81.3 to 71.3 GHz@33%strain)and is also capable of retaining shielding effectiveness even after multiple strain cycles.This newly explored device presents an advanced paradigm for powerful EMI shielding performance for next-generation smart electronics.

MXene@c-MWCNT Adhesive Silica Nanofiber Membranes Enhancing Electromagnetic Interference Shielding and Thermal Insulation Performance in Extreme Environments

A lightweight flexible thermally stable composite is fabricated by com-bining silica nanofiber membranes(SNM)with MXene@c-MWCNT hybrid film.The flexible SNM with outstanding thermal insulation are prepared from tetraethyl orthosilicate hydrolysis and condensation by electrospinning and high-temperature calcination;the MXene@c-MWCNT_(x:y)films are prepared by vacuum filtration tech-nology.In particular,the SNM and MXene@c-MWCNT_(6:4)as one unit layer(SMC_(1))are bonded together with 5 wt%polyvinyl alcohol(PVA)solution,which exhibits low thermal conductivity(0.066 W m^(-1)K^(-1))and good electromagnetic interference(EMI)shielding performance(average EMI SE_(T),37.8 dB).With the increase in func-tional unit layer,the overall thermal insulation performance of the whole composite film(SMC_(x))remains stable,and EMI shielding performance is greatly improved,especially for SMC_(3)with three unit layers,the average EMI SET is as high as 55.4 dB.In addition,the organic combination of rigid SNM and tough MXene@c-MWCNT_(6:4)makes SMC_(x)exhibit good mechanical tensile strength.Importantly,SMC_(x)exhibit stable EMI shielding and excellent thermal insulation even in extreme heat and cold environment.Therefore,this work provides a novel design idea and important reference value for EMI shielding and thermal insulation components used in extreme environmental protection equipment in the future.

Printable Aligned Single-Walled Carbon Nanotube Film with Outstanding Thermal Conductivity and Electromagnetic Interference Shielding Performance

Ultrathin,lightweight,and flexible aligned single-walled carbon nanotube(SWCNT)films are fabricated by a facile,environmentally friendly,and scalable printing methodology.The aligned pattern and outstanding intrinsic properties render“metal-like”thermal conductivity of the SWCNT films,as well as excellent mechanical strength,flexibility,and hydrophobicity.Further,the aligned cellular microstructure promotes the electromagnetic interference(EMI)shielding ability of the SWCNTs,leading to excellent shielding effectiveness(SE)of~39 to 90 dB despite a density of only~0.6 g cm^(−3) at thicknesses of merely 1.5-24μm,respectively.An ultrahigh thickness-specific SE of 25693 dB mm^(−1) and an unprecedented normalized specific SE of 428222 dB cm^(2)g^(−1) are accomplished by the freestanding SWCNT films,significantly surpassing previously reported shielding materials.In addition to an EMI SE greater than 54 dB in an ultra-broadband frequency range of around 400 GHz,the films demonstrate excellent EMI shielding stability and reliability when subjected to mechanical deformation,chemical(acid/alkali/organic solvent)corrosion,and high-/low-temperature environments.The novel printed SWCNT films offer significant potential for practical applications in the aerospace,defense,precision components,and smart wearable electronics industries.

Annealing effects of Sn-Al and Sn-Cu nano thin films on mechanism of electromagnetic interference shielding

The sputtered Sn-Al and Sn-Cu thin films were used to investigate the effects of the crystallization mechanism and film thickness on the electromagnetic interference （EMI） characteristics. In addition, the annealed microstructure, electrical conductivities and EMI characteristics of the Sn-xAl films and the Sn-xCu films were compared. The results show that the electromagnetic interference （EMI） shielding of Sn-Al film was increased after annealing. For the Sn-Cu films with higher Cu mole concentration, the low frequency EMI shielding could not be improved. After annealing, the Sn-Cu thin film with lower Cu mole concentration possesses excellent EMI shielding at lower frequencies, but has an inverse tendency at higher frequencies.

Surface Plasmon Interference Lithography Assisted by a Fabry-Perot Cavity Composed of Subwavelength Metal Grating and Thin Metal Film

A surface plasmon interference lithography assisted by a Fabry-Perot （F-P） cavity composed of subwavelength metal gratings and a thin metal fihn is proposed to fabricate high-quality nanopatterns. The calculated results indicate that uniform straight interference fringes with high contrast and high electric-field intensity are formed in the resist under the F-P cavity. The analyses of spatial frequency spectra illuminate the physical mechanism of the formation for the interference fringes. The influence of the F-P cavity spacing is discussed in detail. Moreover, the error analyses reveal that all parameters except the metal grating period in this scheme can bear large tolerances for the device fabrication.

Water and nitrogen transport characteristics of single-line interference infiltration under film hole irrigation with muddy water and fertilizer

Based on the experimental data,this study investigated the effect of sand content of muddy water on water and nitrogen transport characteristics of the single-line interference infiltration under film hole irrigation with muddy water and fertilizer.The relationship between the single-line interference infiltration parameters,the sand content,the wetting front movement distances,and the sand content were all established.The model of the cumulative infiltration volume of per unit film pore area,the vertical and horizontal wetting front movement distance of the free surface,and the wetting front movement distance of the interference center with sand content and infiltration time were proposed.Reveal the law of the change of soil water content and the distribution of NO_(3)^(-)-N content based on different muddy water sand content.The results indicate that at the same infiltration time,as the muddy water sand content increases,the cumulative infiltration volume per unit pore area decreases.The infiltration index of the free infiltration and the single-line interference vary little when the sand content increases,mainly are around 0.64 and 0.58.The relationship between infiltration parameters a,b and the sand content is linear function.At the same location,the more the sand content,the smaller the wetting front movement distance in free surface and the single-line interference surface,the less the NO_(3)^(-)-N content.

Simulation on Mechanical Behaviors of Oil-film Bearing Sleeve by Elastic Interference Fit

Oil film bearing,which works on thin film between sleeve and bush,is widely used in steel industry due to the characteristics of high efficiency and low noise,etc. The backup roll of 1 580PC hot strip mill invested by some steel corporation has been equipped with such bearing. During the process of setup&disassembly and usage period,the sleeve has been dramatically damaged,which results in production accidents and decreases its service life,thus heavily influencing steel production. Aimed at such puzzles,under specific loadcase,mechanical properties of bearing sleeve,as well as estimation of contact status and adhesive force of sleeve by interference fit,are quantitatively simulated by finite element method,which establishes an mechanical foundation for improving the load capacity of bearing and decreasing its wear and adhesion damages. Finally,some measures and conclusions are drawn.

Progress and roadmap for graphene films in electromagnetic interference shielding

Graphene films(GFs)featured with exceptional electrical property and macroscopic ultrathin two-dimensional structure demonstrate infinite potentials for electromagnetic interference shielding applications.By retrospect-ing the advanced achievements of GF-type shielding materials over the past decades,this review aims to provide a roadmap driven by the great progress and inspire future disruptive innovations.The fabrication methods of GFs are systematically discussed,with a particular emphasis on creative approaches.Strategies to optimize the shielding performance are elaborated in terms of manufacturing methods,shielding efficiency and properties,corresponding mechanisms,challenges and perspectives.Likewise,advancements of multifunctional GFs simul-taneously satisfying electromagnetic shielding with thermal dissipation or transparent requirements are outlined.Using history as a mirror,a clear insight into this rapidly growing field is given,and corresponding current chal-lenges and future opportunities in the fabrication and application of GF-family shielding materials are highlighted and envisioned.We hope this review can encourage further innovations in this exciting branch of research and inspire scientists from both academia and industry to promote revolutionary breakthroughs in GF-shields for next-generation shielding applications.

Environmentally Tough and Stretchable MXene Organohydrogel with Exceptionally Enhanced Electromagnetic Interference Shielding Performances

Conductive hydrogels have potential applications in shielding electromagnetic(EM)radiation interference in deformable and wearable electronic devices,but usually suffer from poor environmental stability and stretching-induced shielding performance degradation.Although organohydrogels can improve the environmental stability of materials,their development is at the expense of reducing electrical conductivity and thus weakening EM interference shielding ability.Here,a MXene organohydrogel is prepared which is composed of MXene network for electron conduction,binary solvent channels for ion conduction,and abundant solvent-polymer-MXene interfaces for EM wave scattering.This organohydrogel possesses excellent anti-drying ability,low-temperature tolerance,stretchability,shape adaptability,adhesion and rapid self-healing ability.Two effective strategies have been proposed to solve the problems of current organohydrogel shielding materials.By reasonably controlling the MXene content and the glycerol-water ratio in the gel,MXene organohydrogel can exhibit exceptionally enhanced EM interference shielding performances compared to MXene hydrogel due to the increased physical cross-linking density of the gel.Moreover,MXene organohydrogel shows attractive stretching-enhanced interference effectiveness,caused by the connection and parallel arrangement of MXene nanosheets.This well-designed MXene organohydrogel has potential applications in shielding EM interference in deformable and wearable electronic devices.

Multifunctional MXene/Carbon Nanotube Janus Film for Electromagnetic Shielding and Infrared Shielding/Detection in Harsh Environments

Multifunctional,flexible,and robust thin films capable of operating in demanding harsh temperature environments are crucial for various cutting-edge applications.This study presents a multifunctional Janus film integrating highly-crystalline Ti_(3)C_(2)T_(x) MXene and mechanically-robust carbon nanotube(CNT)film through strong hydrogen bonding.The hybrid film not only exhibits high electrical conductivity(4250 S cm^(-1)),but also demonstrates robust mechanical strength and durability in both extremely low and high temperature environments,showing exceptional resistance to thermal shock.This hybrid Janus film of 15μm thickness reveals remarkable multifunctionality,including efficient electromagnetic shielding effectiveness of 72 dB in X band frequency range,excellent infrared(IR)shielding capability with an average emissivity of 0.09(a minimal value of 0.02),superior thermal camouflage performance over a wide temperature range(−1 to 300℃)achieving a notable reduction in the radiated temperature by 243℃ against a background temperature of 300℃,and outstanding IR detection capability characterized by a 44%increase in resistance when exposed to 250 W IR radiation.This multifunctional MXene/CNT Janus film offers a feasible solution for electromagnetic shielding and IR shielding/detection under challenging conditions.

Measurement of Shear Stress Acting on Flat Plate Using Oil Film Interferometry

Measurements of frictional resistance play an important role in engineering practice. There are several types of air resistance acting on an aircraft, for example. One of them, frictional resistance, accounts for half of the air resistance. Oil film interferometry is one of methods for measuring the frictional resistance. Oil dropped on an object is thinly stretched by the frictional resistance. The bright and dark fringe pattern is generated when monochromatic light is applied to the oil film. The gradient of the oil thickness decreases with the lapse of time, and thus the spacing between neighboring the dark lines increases. The rate at which the spacing increases is proportional to the frictional resistance. In this study, the frictional resistance acting on a small area on a plate was measured and compared with the theoretical value. As a result, these results qualitatively agree well with each other.

Reduced graphene oxide porous films containing SiC whiskers for constructing multilayer electromagnetic shields

Developing lightweight and flexible thin films for electromagnetic interference(EMI)shielding is of great importance.Porous thin films of reduced graphene oxide containing SiC whiskers(SiC@RGO)for EMI shielding were prepared by a two-step reduction of graphene oxide(GO),in which the two steps were chemical reduction by HI and the solid phase microwave irradiation.A significant increase of the film thickness from around 20 to 200μm was achieved due to the formation of a porous structure by gases released during the 3 s of solid phase microwave irradiation.The total shielding effectiveness(SET)and the reflective SE(SE_(R))of the SiC@RGO porous thin films depended on the GO/SiC mass ratio.The highest SET achieved was 35.6 dB while the SE_(R) was only 2.8 dB,when the GO/SiC mass ratio was 4∶1.The addition of SiC whiskers was critical for the multi-reflection,interfacial po-larization and dielectric attenuation of EM waves.A multilayer film with a gradient change of SE values was constructed using SiC@RGO porous films and multi-walled carbon nanotubes buckypapers.The highest SET of the multilayer films reached 75.1 dB with a SE_(R) of 2.7 dB for a film thickness of about 1.5 mm.These porous SiC@RGO thin films should find use in multilayer or sand-wich structures for EMI absorption in packaging or lining.

Ultra-low reflection electromagnetic interference shielding nanofiber film with effective solar harvesting and self-cleaning

It is urgent to develop low-reflection electromagnetic interference shielding material to shield electromagnetic waves(EMW)and reduce their secondary radiation pollution.Herein,an electromagnetic interference shielding nanofiber film is composed of ZnO and carbon nanofiber(CNF)via electrospinning and carbonization approachs,and subsequently coating perfuorooctyltriethoxysilane as a protective layer.On the one hand,ZnO coated by porous carbon,which is derived from ZIF-8,endows the nanofiber film low reflection property through optimizing impedance matching between free space and the nanofiber film.On the other hand,the nanofiber film possesses high electromagnetic interference shielding efficiency,which is beneficial by excellent electrical conductivity of CNF derived from waste leather scraps.Furthermore,the nanofiber film involves abundant interface,which contributes to high interfacial polarization loss.Thus,the nanofiber film with a thickness of 250 pm has electrical conductivity of 53 S/m and shielding efficiency of 50 dB.The reflection coefficient of the nanofiber film is inferior to 0.4 indicates that most of EMW are absorbed inside the materials and the nanofiber film is effective in reducing secondary radiation contamination of electromagnetic waves.Fortunately,the nanofiber film exhibits outstanding solar harvesting performance(106℃at 1 sun density)and good self-cleaning performance,which ensure that the nanofiber film can work in harsh environments.This work supplies a credible reference for fabricating low-reflection electromagnetic shielding nanofiber film to reduce secondary radiation pollution and facilitates the upcycling of waste leather scraps.

Design of non-polarizing thin film edge filters

The separation between s- and p-polarization components invariably affects thin film edge filters used for tilted incidence and is a difficult problem for many applications, especially for optical communication. This paper presents a novel design method to obtain edge filters with non-polarization at incidence angle of 45°. The polarization separation at 50% trans-mittance for a long-wave-pass filter and a short-wave-pass filter is 0.3 nm and 0.1 nm respectively. The design method is based on a broadband Fabry-Perot thin-film interference filter in which the higher or lower interference band at both sides of the main transmittance peak can be used for initial design of long-wave-pass filter or short-wave-pass filter and then can be refined to reduce the transmittance ripples. The spacer 2H2L2H or 2L2H2L of the filter is usually taken. Moreover, the method for expanding the bandwidth of rejection and transmission is explained. The bandwidth of 200 nm for both rejection region and transmission band is obtained at wavelength 1550 nm. In this way, the long-wave-pass and short-wave-pass edge filters with zero separation between two polarization components can easily be fabricated.

Broadband,polarization-insensitive,and wide-angle microwave absorber based on resistive film

A simple design of broadband metamaterial absorber（MA） based on resistive film is numerically presented in this paper.The unit cell of this absorber is composed of crossed rectangular rings-shaped resistive film,dielectric substrate,and continuous metal film.The simulated results indicate that the absorber obtains a 12.82-GHz-wide absorption from about 4.75 GHz to 17.57 GHz with absorptivity over 90% at normal incidence.Distribution of surface power loss density is illustrated to understand the intrinsic absorption mechanism of the structure.The proposed structure can work at wide polarization angles and wide angles of incidence for both transverse electric（TE） and transverse magnetic（TM） waves.Finally,the multi-reflection interference theory is involved to analyze and explain the broadband absorption mechanism at both normal and oblique incidence.Moreover,the polarization-insensitive feature is also investigated by using the interference model.It is seen that the simulated and calculated absorption rates agree fairly well with each other for the absorber.

Numerical investigation of unsteady mixing mechanism in plate film cooling

A large-scale large eddy simulation in high performance personal computer clusters is carried out to present unsteady mixing mechanism of film cooling and the development of films. Simulation cases include a single-hole plate with the inclined angle of 30° and blowing ratio of 0.5, and a single-row plate with hole-spacing of 1.5D and 2D （diameters of the hole）. According to the massive simulation results, some new unsteady phenomena of gas films are found. The vortex system is changed in different position with the development of film cooling with the time marching the process of a single-row plate film cooling. Due to the mutual interference effects including mutual exclusion, a certain periodic sloshing and mutual fusion, and the structures of a variety of vortices change between parallel gas films. Macroscopic flow structures and heat transfer behaviors are obtained based on 20 million grids and Reynolds number of 28600.

核用锆合金管氧化过程中光谱发射率特性研究

发射率在锆合金管非接触测温的准确性和失水事故情况下的传热分析上具有重要意义。本文采集了SZA4、SZA6和ZIRLO 3种锆合金在400,500,600℃下氧化100min过程中4~12μm内的光谱发射率数据,分析了温度、氧化膜厚度和合金组分对材料光谱发射率特性的影响规律。结果表明,3种锆合金在氧化过程中发射率变化趋势基本相同,但组分差异导致在发射率的数值和振荡特性上略有差别。通过建立薄膜干涉模型,解释了光谱发射率在波长方向上的振荡现象,并结合振荡极值与干涉效应原理计算了合金表面氧化膜厚度,在0.6~8μm范围内测量精度达到±0.3μm。

基于激光自混合干涉的磁场测量方法研究

针对光纤磁流体磁场传感器易受环境干扰及磁流体薄膜制作工艺复杂的问题,激光自混合干涉具有抗干扰能力强、稳定性好的特点,提出一种基于空间光的水平偏振激光自混合干涉的磁场测量方法,在外部磁场的作用下,水平偏振自混合干涉信号幅值发生变化,在一定范围内,磁场与信号幅值变化成正比,通过用施加磁场前后信号幅值的均值比与磁场的变化关系实现对磁场的传感检测。经过实验验证,信号的幅值在1%浓度的磁流体中衰减明显,薄膜厚度为0.5 mm,减小了薄膜的制作难度。在实验结果中对5.02 mt到19.112 mt磁场强度范围内的均值比进行线性拟合,相对误差最小为0.17%。