Deciphering engineering principle of three-phase interface for advanced gas-involved electrochemical reactions

As an alternative to conventional energy conversion and storage reactions,gas-involved electrochemical reactions,including the carbon dioxide reduction reaction(CO_(2)RR),nitrogen reduction reaction(NRR)and hydrogen evolution reaction(HER),have become an emerging research direction and have gained increasing attention due to their advantages of environmental friendliness and sustainability.Various studies have been designed to accelerate sluggish kinetics but with limited results.Most of them promote the reaction by modulating the intrinsic properties of the catalyst,ignoring the synergistic effect of the reaction as a whole.Due to the introduction of gas,traditional liquid-solid two-phase reactions are no longer applicable to future research.Since gas-involved electrochemical reactions mostly occur at the junctions of gaseous reactants,liquid electrolytes and solid catalysts,the focus of future research on reaction kinetics should gradually shift to three-phase reaction interfaces.In this review,we briefly introduce the formation and constraints of the three-phase interface and propose three criteria to judge its merit,namely,the active site,mass diffusion and electron mass transfer.Subsequently,a series of modulation methods and relevant works are discussed in detail from the three improvement directions of‘exposing more active sites,promoting mass diffusion and accelerating electron transfer’.Definitively,we provide farsighted insights into the understanding and research of three-phase interfaces in the future and point out the possible development direction of future regulatory methods,hoping that this review can broaden the future applications of the three-phase interface,including but not limited to gas-involved electrochemical reactions.

Advanced In Situ Characterization Techniques for Direct Observation of Gas-Involved Electrochemical Reactions

Gas-involved electrochemical reactions provide feasible solutions to the worldwide energy crisis and environmental pollution.It has been recognized that various elements of the reaction system,including catalysts,intermediates,and products,will undergo real-time variations during the reaction process,which are of significant meaning to the in-depth understanding of reaction mechanisms,material structure,and active sites.As judicious tools for real-time monitoring of the changes in these complex elements,in situ techniques have been exposed to the spotlight in recent years.This review aims to highlight significant progress of various advanced in situ characterization techniques,such as in situ X-ray based technologies,in situ spectrum technologies,and in situ scanning probe technologies,that enhance our understanding of heterogeneous electrocatalytic carbon dioxide reduction reaction,nitrogen reduction reaction,and hydrogen evolution reaction.We provide a summary of recent advances in the development and applications of these in situ characterization techniques,from the working principle and detection modes to detailed applications in different reactions,along with key questions that need to be addressed.Finally,in view of the unique application and limitation of different in situ characterization techniques,we conclude by putting forward some insights and perspectives on the development direction and emerging combinations in the future.

Effects of stress dependent electrochemical reaction on voltage hysteresis of lithium ion batteries

Intercalation of lithium ions into the electrodes of lithium ion batteries is affected by the stress of active materials, leading to energy dissipation and stress dependent voltage hysteresis. A reaction-diffusion-stress coupling model is established to investigate the stress effects under galvanostatic and potentiostatic operations. It is found from simulations that the stress hysteresis contributes to the voltage hysteresis and leads to the energy dissipation. In addition, the stress induced voltage hysteresis is small in low rate galvanostatic operations but extraordinarily significant in high rate cases. In potentiostatic operations, the stresses and stress induced overpotentials increase to a peak value very soon after the operation commences and decays all the left time. Therefore,a combined charge-discharge operation is suggested, i.e., first the galvanostatic one and then the potentiostatic one. This combined operation can not only avoid the extreme stress during operations so as to prevent electrodes from failure but also reduce the voltage hysteresis and energy dissipation due to stress effects.

Direct Electrochemical Reaction of Horseradish Peroxidase Immobilized on the Surface of Active Carbon Powders

It is reported for the first time that horseradish peroxidase (HRP) immobilized on the active carbon can undergo a direct quasi-reversible electrochemical reaction. In addition, the immobilized HRP showed the stable bioelectrocatalytic activity for the reduction of H2O2.

Effect of electrochemical reactions droplet metal in direct current on oxygen contamination of submerged arc welding

Agglomerated fluxes with different basicity index designed in laboratory were used to study electrochemical reactions between slag and metal in submerged arc welding under both power polarities. The droplet metal oxygen and nitrogen contents were measured using oxygen-nitrogen instrument in order to analyze indirectly metallurgy electrochemical reactions taking place in cathode and anode of welding arc. The results show that just in the period of droplet growth at the tip of consumable electrode the electrochemical oxygen contamination is produced in the case of direct current electrode positive polarity whereas electrochemical oxygen lost in electrode negative polarity. Furthermore, the results indicate that the basicity index of molten slag has great influence upon electrochemical reaction. With basicity index increasing, the effect of oxygen transferring resulted from electrochemistry becomes more evident for reacting dynamics depended on ion characteristics of molten slag. The effect of basicity index on metal-slag electrochemical reaction is contrary to traditional thermo-chemical reaction and therefore it is necessary to be considered as a metallurgy factor.

Synergistic promotion of particulate matter reduction and production performance via adjusting electrochemical reactions in the zinc electrolysis industry

Heavy particulate matter (PM) pollution and high energy consumption are the bottlenecks of hydrometallurgy, especially in the electrolysis process. Therefore, an urgent need is to explore PM reduction methods with production performance co-benefits. This study presents three PM reduction methods based on controlling operating parameters, i.e., lowering electrolyte temperature, H2SO4 concentration, and current density of the cathode. The optimized conditions were also investigated using the response surface methodology to balance the PM reduction effect and Zn production. The results showed that lowering electrolyte temperature is the most efficient, with an 89.0% reduction in the PM generation flux (GFPM). Reducing H2SO4 concentration led to the minimum side effects on the current efficiency of Zn deposition (CEZn) or power consumption (PC). With the premise of non-deteriorating CEZn and PC, GFPM can be reduced by 86.3% at the optimal condition (electrolyte temperature = 295 K, H2SO4 = 110 g/L, current density = 373 A/m^(2)). In addition, the reduction mechanism was elucidated by comprehensively analyzing bubble characteristics, electrochemical reactions, and surface tension. Results showed that lower electrolyte temperature inhibited the oxygen evolution reaction (OER) and compressed gas volume. Lower H2SO4 concentration inhibited the hydrogen evolution reaction (HER) and reduced electrolyte surface tension. Lower current density inhibited both OER and HER by decreasing the reaction current. The inhibited gas evolutions reduced the microbubbles’ number and size, thereby reducing GFPM. These results may provide energy-efficient PM reduction methods and theoretical hints of exploring cleaner PM reduction approaches for industrial electrolysis.

Exploring nitrogen reduction reaction mechanisms in electrocatalytic ammonia synthesis:A comprehensive review

The electrochemical nitrogen reduction reaction(eNRR)holds significant promise as a sustainable alternative to the conventional large-scale Haber Bosch process,offering a carbon footprint-free approach for ammonia synthesis.While the process is thermodynamically feasible at ambient temperature and pressure,challenges such as the competing hydrogen evolution reaction,low nitrogen solubility in electrolytes,and the activation of inert dinitrogen(N_(2))gas adversely affect the performance of ammonia production.These hurdles result in low Faradaic efficiency and low ammonia production rate,which pose obstacles to the commercialisation of the process.Researchers have been actively designing and proposing various electrocatalysts to address these issues,but challenges still need to be resolved.A key strategy in electrocatalyst design lies in understanding the underlying mechanisms that govern the success or failure of the electrocatalyst in driving the electrochemical reaction.Through mechanistic studies,we gain valuable insights into the factors affecting the reaction,enabling us to propose optimised designs to overcome the barriers.This review aims to provide a comprehensive understanding of the various mechanisms involved in eNRR on the electrocatalyst surface.It delves into the various mechanisms such as dissociative,associative,Mars-van Krevelen,lithium-mediated nitrogen reduction and surface hydrogenation mechanisms of nitrogen reduction.By unravelling the intricacies of eNRR mechanisms and exploring promising avenues,we can pave the way for more efficient and commercially viable ammonia synthesis through this sustainable electrochemical process by designing an efficient electrocatalyst.

In situ observation of the electrochemical behavior of Li–CO_(2)/O_(2)batteries in an environmental transmission electron microscope

Li–CO_(2)/O_(2)batteries,a promising energy storage technology,not only provide ultrahigh discharge capacity but also capture CO_(2)and turn it into renewable energy.Their electrochemical reaction pathways'ambiguity,however,creates a hurdle for their practical application.This study used copper selenide(CuSe)nanosheets as the air cathode medium in an environmental transmission electron microscope to in situ study Li–CO_(2)/O_(2)(mix CO_(2)as well as O_(2)at a volume ratio of 1:1)and Li–O_(2)batteries as well as Li–CO_(2)batteries.Primary discharge reactions take place successively in the Li–CO_(2)/O_(2)–CuSe nanobattery:(I)4Li^(+)+O_(2)+4e^(−)→2Li_(2)O;(II)Li_(2)O+CO_(2)→Li_(2)CO_(3).The charge reaction proceeded via(III)2Li_(2)CO_(3)→4Li^(+)+2CO_(2)+O_(2)+4e^(−).However,Li–O_(2)and Li–CO_(2)nanobatteries showed poor cycling stability,suggesting the difficulty in the direct decomposition of the discharge product.The fluctuations of the Li–CO_(2)/O_(2)battery's electrochemistry were also shown to depend heavily on O_(2).The CuSe‐based Li–CO_(2)/O_(2)battery showed exceptional electrochemical performance.The Li^–CO_(2)/O_(2)battery offered a discharge capacity apex of 15,492 mAh g^(−1) and stable cycling 60 times at 100 mA g^(−1).Our research offers crucial insight into the electrochemical behavior of Li–CO_(2)/O_(2),Li–O_(2),and Li–CO_(2)nanobatteries,which may help the creation of high‐performance Li–CO_(2)/O_(2)batteries for energy storage applications.

Elucidating the Role of Mass Transfer in Electrochemical Redox Reactions on Electrospun Fibers

Mass transfer can tune the surface concentration of reactants and products and subsequently infl uence the catalytic perfor-mance.The morphology of nanomaterials plays an important role in the mass transfer of reaction microdomains,but related studies are lacking.Herein,a facile electrospinning technique utilizing cellulose was employed to fabricate a series of carbon nanofi bers with diff erent diameters,which exhibited excellent electrochemical nitrate reduction reaction and oxygen evolu-tion reaction activities.Furthermore,the microstructure of electrocatalysts could infl uence the gas-liquid-solid interfacial mass transfer,resulting in diff erent electrochemical performances.

Chalcogen heteroatoms doped nickel-nitrogen-carbon single-atom catalysts with asymmetric coordination for efficient electrochemical CO_(2)reduction

The electronic configuration of central metal atoms in single-atom catalysts(SACs)is pivotal in electrochemical CO_(2)reduction reaction(eCO_(2)RR).Herein,chalcogen heteroatoms(e.g.,S,Se,and Te)were incorporated into the symmetric nickel-nitrogen-carbon(Ni-N4-C)configuration to obtain Ni-X-N3-C(X:S,Se,and Te)SACs with asymmetric coordination presented for central Ni atoms.Among these obtained Ni-X-N3-C(X:S,Se,and Te)SACs,Ni-Se-N3-C exhibited superior eCO_(2)RR activity,with CO selectivity reaching~98%at-0.70 V versus reversible hydrogen electrode(RHE).The Zn-CO_(2)battery integrated with Ni-Se-N3-C as cathode and Zn foil as anode achieved a peak power density of 1.82 mW cm-2 and maintained remarkable rechargeable stability over 20 h.In-situ spectral investigations and theoretical calculations demonstrated that the chalcogen heteroatoms doped into the Ni-N4-C configuration would break coordination symmetry and trigger charge redistribution,and then regulate the intermediate behaviors and thermodynamic reaction pathways for eCO_(2)RR.Especially,for Ni-Se-N3-C,the introduced Se atoms could significantly raise the d-band center of central Ni atoms and thus remarkably lower the energy barrier for the rate-determining step of*COOH formation,contributing to the promising eCO_(2)RR performance for high selectivity CO production by competing with hydrogen evolution reaction.

MOF‐derived 1D/3D N‐doped porous carbon for spatially confined electrochemical CO2 reduction to adjustable syngas

Electrochemical reduction of CO_(2)to syngas(CO and H_(2))offers an efficient way to mitigate carbon emissions and store intermittent renewable energy in chemicals.Herein,the hierarchical one‐dimensional/three‐dimensional nitrogen‐doped porous carbon(1D/3D NPC)is prepared by carbonizing the composite of Zn‐MOF‐74 crystals in situ grown on a commercial melamine sponge(MS),for electrochemical CO_(2)reduction reaction(CO_(2)RR).The 1D/3D NPC exhibits a high CO/H_(2)ratio(5.06)and CO yield(31 mmol g^(−1)h^(−1))at−0.55 V,which are 13.7 times and 21.4 times those of 1D porous carbon(derived from Zn‐MOF‐74)and N‐doped carbon(carbonized by MS),respectively.This is attributed to the unique spatial environment of 1D/3D NPC,which increases the adsorption capacity of CO_(2)and promotes electron transfer from the 3D N‐doped carbon framework to 1D carbon,improving the reaction kinetics of CO_(2)RR.Experimental results and charge density difference plots indicate that the active site of CO_(2)RR is the positively charged carbon atom adjacent to graphitic N on 1D carbon and the active site of HER is the pyridinic N on 1D carbon.The presence of pyridinic N and pyrrolic N reduces the number of electron transfer,decreasing the reaction kinetics and the activity of CO_(2)RR.The CO/H_(2)ratio is related to the distribution of N species and the specific surface area,which are determined by the degree of spatial confinement effect.The CO/H_(2)ratios can be regulated by adjusting the carbonization temperature to adjust the degree of spatial confinement effect.Given the low cost of feedstock and easy strategy,1D/3D NPC catalysts have great potential for industrial application.

Core-shell Ag-Pt nanoparticles:A versatile platform for the synthesis of heterogeneous nanostructures towards catalyzing electrochemical reactions

Heterogeneous nanostructures that are defined as a hybrid structure consisting of two or more nanoscale domains with distinct chemical compositions or physical characteristics have attracted intense efforts in recent years.In this review,we focus on the introduction of a number of heterogeneous nanostructures derived using core-shell Ag-Pt nanoparticles as starting materials,including hollow,dimeric and composite structures and also highlight their application in catalyzing electrochemical reactions,e.g.,methanol oxidation reaction and oxygen reduction reaction.This review not only shows the capability of core-shell Ag-Pt nanoparticles in producing various heterogeneous nanostructures as starting templates,but also highlights the structural design or electronic interaction that endows the heterogeneous nanostructures with enhanced catalytic properties either in methanol oxidation or in oxygen reduction.Further,we also make some perspectives for more heterogeneous nanostructures that may be prepared by using core-shell Ag-Pt particles or their derivatives so as to offer the readers the opportunities and challenges in this field.

Electrochemical reaction mechanism of porous Zn_(2)Ti_(3)O_(8)as a high-performance pseudocapacitive anode for Li-ion batteries

Zn_(2)Ti_(3)O_(8),as a new type of anode material for lithium-ion batteries,is attracting enormous attention because of its low cost and excellent safety.Though decent capacities have been reported,the electrochemical reaction mechanism of Zn_(2)Ti_(3)O_(8)has rarely been studied.In this work,a porous Zn_(2)Ti_(3)O_(8)anode with considerably high capacity(421 mAh/g at 100 mA/g and 209 mAh/g at 5000 mA/g after 1500 cycles)was reported,which is even higher than ever reported titanium-based anodes materials including Li_(4)Ti_(5)O_(12),TiO_(2)and Li_(2)ZnTi_(3)O_(8).Here,for the first time,the accurate theoretical capacity of Zn_(2)Ti_(3)O_(8)was confirmed to be 266.4 mAh/g.It was also found that both intercalation reaction and pseudocapacitance contribute to the actual capacity of Zn_(2)Ti_(3)O_(8),making it possibly higher than the theoretical value.Most importantly,the porous structure of Zn_(2)Ti_(3)O_(8)not only promotes the intercalation reaction,but also induces high pseudocapacitance capacity(225.4 mAh/g),which boosts the reversible capacity.Therefore,it is the outstanding pseudocapacitance capacity of porous Zn_(2)Ti_(3)O_(8)that accounts for high actual capacity exceeding the theoretical one.This work elucidates the superiorities of porous structure and provides an example in designing high-performance electrodes for lithium-ion batteries.

Study of antigen and antibody reaction in electrochemical reactions with ellipsometric spectroscopy

IN the study of antigen and antibody reaction with ellipsometric spectroscopy, most researchers calculated the thickness of antibody film, absorbance and film constant by mathematic models.But by using simple mathematic models, it is very hard to describe accurately the real state of the system. Huang and Ord proposed a new physical measurement (optical tracking rate,Vop), indicating the total change of △, Ψ in study of oxidation and reduction reaction of the iron electrode in alkaline solution. Many experimental results showed that the spectral peaks in Vop～t figure correspond to the turning points on the polarization curve. This work

Bi-Atom Electrocatalyst for Electrochemical Nitrogen Reduction Reactions

The electrochemical nitrogen reduction reaction(NRR)to directly produce NH3 from N_(2) and H_(2)O under ambient conditions has attracted significant attention due to its ecofriendliness.Nevertheless,the electrochemical NRR presents several practical challenges,including sluggish reaction and low selectivity.Here,bi-atom catalysts have been proposed to achieve excellent activity and high selectivity toward the electrochemical NRR by Ma and his co-workers.It could accelerate the kinetics of N_(2)-to-NH_(3) electrochemical conversion and possess better electrochemical NRR selectivity.This work sheds light on the introduction of bi-atom catalysts to enhance the performance of the electrochemical NRR.

Transition metal-nitrogen sites for electrochemical carbon dioxide reduction reaction

Electrochemical CO2 reduction reaction(CO2RR)powered by renewable electricity has emerged as the most promising technique for CO2 conversion,making it possible to realize a carbon‐neutral cycle.Highly efficient,robust,and cost‐effective catalysts are highly demanded for the near‐future practical applications of CO2RR.Previous studies on atomically dispersed metal‐nitrogen(M‐Nx)sites constituted of earth abundant elements with maximum atom‐utilization efficiency have demonstrated their performance towards CO2RR.This review summarizes recent advances on a variety of M‐Nx sites‐containing transition metal‐centered macrocyclic complexes,metal organic frameworks,and M‐Nx‐doped carbon materials for efficient CO2RR,including both experimental and theoretical studies.The roles of metal centers,coordinated ligands,and conductive supports on the intrinsic activity and selectivity,together with the importance of reaction conditions for improved performance are discussed.The mechanisms of CO2RR over these M‐Nx‐containing materials are presented to provide useful guidance for the rational design of efficient catalysts towards CO2RR.

A combinatorial descriptor for volcano relationships of electrochemical nitrogen reduction reaction

Though touted as a potential way to realize clean ammonia synthesis,electrochemical ammonia synthesis is currently limited by its catalytic efficiency.Great effort has been made to find catalysts with improved activity toward electrochemical nitrogen reduction reaction(eNRR).Rational screening of catalysts can be facilitated using the volcano relationship between catalytic activity and adsorption energy of an intermediate,namely,the activity descriptor.In this work,we proposeΔG^(*)_(NH_(2))+ΔG^(*)_(NNH)as a combinatorial descriptor,which shows better predictive power than traditional descriptors using the adsorption free energies of single intermediates.The volcano plots based on the combinatorial descriptor exhibits peak activity fixedly at the descriptor value corresponding to the formation free energy of NH3,regardless of the catalyst types;while the descriptor values correspond to the top activities for eNRR on volcano plots based on single descriptors usually vary with the types of catalysts.

Activation of Transition Metal(Fe,Co and Ni)-Oxide Nanoclusters by Nitrogen Defects in Carbon Nanotube for Selective CO_(2) Reduction Reaction

The electrochemical carbon dioxide reduction reaction(CO_(2)RR),which can produce value-added chemical feedstocks,is a proton-coupled-electron process with sluggish kinetics.Thus,highly efficient,cheap catalysts are urgently required.Transition metal oxides such as CoO_(x),FeO_(x),and NiO_(x)are low-cost,low toxicity,and abundant materials for a wide range of electrochemical reactions,but are almost inert for CO_(2)RR.Here,we report for the first time that nitrogen doped carbon nanotubes(N-CNT)have a surprising activation effect on the activity and selectivity of transition metal-oxide(MO_(x)where M=Fe,Ni,and Co)nanoclusters for CO_(2)RR.MO_(x)supported on N-CNT,MO_(x)/N-CNT,achieves a CO yield of 2.6–2.8 mmol cm−2 min−1 at an overpotential of−0.55 V,which is two orders of magnitude higher than MO_(x)supported on acid treated CNTs(MO_(x)/O-CNT)and four times higher than pristine N-CNT.The faraday efficiency for electrochemical CO_(2)-to-CO conversion is as high as 90.3%at overpotential of 0.44 V.Both in-situ XAS measurements and DFT calculations disclose that MO_(x)nanoclusters can be hydrated in CO_(2)saturated KHCO_(3),and the N defects of N-CNT effectively stabilize these metal hydroxyl species under carbon dioxide reduction reaction conditions,which can split the water molecules and provide local protons to inhibit the poisoning of active sites under carbon dioxide reduction reaction conditions.

CHRONOABSORPTOMETRY FOR THE DETERMINATION OF KINETIC PARAMETERS OF ELECTRON TRANSFER REACTIONS USING LONG-OPTICAL-PATH ELECTROCHEMICAL CELL

A single potential step chronoabsorptometric method for the determination of ki- netic parameters of simple quasi-reversible reactions is described.It is verified by determining the kinetic parameters for the electroreduction of ferricyanide.A long-optical-path electro- chemical cell with a plug-in electrode is used.The thickness of solution layer is 0.55 mm

Electrochemical Determination of Rate Constants for Reactions of OH and its Application in the Evaluation of Anti-Oxidant Actions of Rheum

A single-sweep oscillopolarographic procedure is descrital which allows detethenahon of rateconstants for reachons of oH. For a wide range of compounds, the results fit well with rate constantspreviously obtained with other methods. Rate constants for reactions of six kinds of active compoundscontalned in rheum, a tradihonal Chinese herb, have been deteboned by this method. Rcationmechanism ha5 also been discussed.