High Seebeck Coefficient Thermally Chargeable Supercapacitor with Synergistic Effect of Multichannel Ionogel Electrolyte and Ti_(3)C_(2)T_(x) MXene-Based Composite Electrode

Thermally chargeable supercapacitors can collect low-grade heat generated by the human body and convert it into electricity as a power supply unit for wearable electronics.However,the low Seebeck coefficient and heat-to-electricity conversion efficiency hinder further application.In this paper,we designed a high-performance thermally chargeable supercapacitor device composed of ZnMn_(2)O_(4)@Ti_(3)C_(2)T_(x)MXene composites(ZMO@Ti_(3)C_(2)T_(x) MXene)electrode and UIO-66 metal–organic framework doped multichannel polyvinylidene fluoridehexafluoro-propylene ionogel electrolyte,which realized the thermoelectric conversion and electrical energy storage at the same time.This thermally chargeable supercapacitor device exhibited a high Seebeck coefficient of 55.4 mV K^(−1),thermal voltage of 243 mV,and outstanding heat-to-electricity conversion efficiency of up to 6.48%at the temperature difference of 4.4 K.In addition,this device showed excellent charge–discharge cycling stability at high-temperature differences(3 K)and low-temperature differences(1 K),respectively.Connecting two thermally chargeable supercapacitor units in series,the generated output voltage of 500 mV further confirmed the stability of devices.When a single device was worn on the arm,a thermal voltage of 208.3 mV was obtained indicating the possibility of application in wearable electronics.

On the Thermal Distribution in Oncological Hyperthermia Treatments

The temperature is one of the principal controlling parameters of oncological hyperthermia. However, local heating forms a complicated thermal distribution in space and has developed over time, too. The decisional factors are the heterogeneity of the targeted volume, the electrolyte perfusions controlled by thermal homeostasis, and the spreading of the heat energy with time. A further complication is that the energy absorption sharply changes by depth, so the spatiotemporal development of the temperature distribution requires specialized methods to control. Most of the temperature imaging facilities (thermography, radiometry, electric impedance tomography, etc.) are less precise than the medical practice needs. In contrast, precise point sensing (like thermocouples, thermistors, and fluoroptical methods) is invasive and measures only a discrete point in the robustly changing thermal map. The two most precise thermal imaging methods, computer tomography, and magnetic resonance are expensive and have numerous technical complications. Our objective is to show the complexity of the temperature distribution inside the human body, and offer a relatively simple and cheap method to visualize its spatiotemporal development. A novel emerging technology, the application of ultrasound microbubble contrast agents is a promising method for solving complicated tasks of thermal distribution deep inside the living body. Noteworthy, the temperature distribution does not determine the full hyperthermia process, nonthermal effects make considerable impact, too. Additionally to the difficulties to measure the thermal heterogeneity during hyperthermia in oncology, numerous nonthermal processes, molecular and structural changes are triggered by the incoming electromagnetic energy, which presently has no spatiotemporal visualization technique. Microbubble imaging has a suitable spatiotemporal thermal resolution, and also it is sensitive to nonthermal effects. Its application for characterization of the modulated electrohyperthermia (mEHT) may open a new theranostic facility, using the synergy of the thermal and nonthermal effects of the radiofrequency delivered energy. This complex approach gives facility to follow the mEHT processes, and the proposed microbubble ultrasound imaging has a particularly promising advantage sensing and acting also nonthermally, having potential to characterize the thermally conditioned nonthermal electromagnetic effects in oncologic hyperthermia. The mEHT combined with microbubble ultrasound images could be a robust theranostic method against cancer.

Effect of electrodes and thermal insulators on grain refinement by electric current pulse

The application of electric current pulse（ECP） to a solidification process refers to the immersion of electrodes into the liquid metal and the employment of thermal insulators on the upper surface of metal.In order to ascertain the effects of these two factors on the structure refinement by the ECP technique,three groups of experiments were performed with different types of electrodes or various thermal insulators.By the comparison between solidification structures under different conditions,it is followed that the electrode and the thermal insulator have an obvious influence on the grain refinement under an applied ECP,and further analysis demonstrates that the thermal conditions of the liquid surface play a vital role in the modification of solidification structure.Also,the results support the viewpoint that most of the equiaxed grains originate from the liquid surface subjected to an ECP.

Analytical modeling and simulation of porous electrodes: Li-ion distribution and diffusion-induced stress

A new model of porous electrodes based on the Gibbs free energy is developed, in which lithium-ion(Liion) diffusion, diffusion-induced stress(DIS), Butler–Volmer(BV) reaction kinetics, and size polydispersity of electrode particles are considered. The influence of BV reaction kinetics and concentration-dependent exchange current density(ECD) on concentration profile and DIS evolution are numerically investigated. BV reaction kinetics leads to a decrease in Li-ion concentration and DIS. In addition, concentrationdependent ECD results in a decrease in Li-ion concentration and an increase in DIS. Size polydispersity of electrode particles significantly affects the concentration profile and DIS.Optimal macroscopic state of charge(SOC) should consider the influence of the microscopic SOC values and mass fractions of differently sized particles.

Hierarchical graphite foil/CoNi2S4 flexible electrode with superior thermal conductivity for high-performance supercapacitors

Effective heat dissipation is a crucial issue in electrochemical energy storage devices. Thus, it is highly desirable to develop high-performance electrode materials with high thermal conductivity. Here, we report a facile one-step electrodeposition method to synthesize ternary cobalt nickel sulfide（CoNi2S4）flower-like nanosheets which are grown on graphite foil（GF） as binder-free electrode materials for supercapacitors. The as-fabricated GF/CoNi2S4 integrated electrode manifested an excellent thermal conductivity of 620.1 W·m-1·K-1 and a high specific capacitance of 881 F·g-2 at 5 mA cm-2, as well as good rate capability and cycling stability. Ultimately, the all-solid-state symmetric supercapacitor based on these advanced electrodes demonstrated superior heat dissipation performance during the galvanostatic charge-discharge processes. This novel strategy provides a new example of effective thermal management for potential applications in energy storage devices.

Study on Earth Surface Potential and DC Current Distribution around DC Grounding Electrode

DC magnetic biasing problem,caused by the DC grounding electrode, threatened the safe operation of AC power grid. In this paper, the characteristics of the soil stratification near DC grounding electrode was researched. The AC-DC interconnected large-scale system model under the monopole operation mode was established. The earth surface potential and DC current distribution in various stations under the different surface thickness was calculated. Some useful conclusions are drawn from the analyzed results.

Visualization of particulates distribution from electrode erosion

Particulates generated from electrode erosion in gas spark gap is inevitable and may initiate selfbreakdown behavior with high risk.Traditionally,this problem is addressed by empirical method qualitatively.To push this old problem forward,this paper conducts laser confocal microscopy measurement of eroded surface and a statistical method is introduced to obtain visualization of particulates distribution from electrode erosion after different shots.This method allows dense particulates to be classified with their heights in z direction and scattered figures of particulates within certain height range are obtained.Results indicate that the higher-than-10 μm particulates start to emerge after 200 discharge shots and particulates number has a waved radial distribution with a 0.5 mm wide deposition zone.Based on these quantitative results,the risk of reignition and field-distortion failure that are triggered by particulates can be assessed.

Effect of dilution gas composition on the evolution of graphite electrode characteristics in the spark gap switch

As the widely implemented electrode material,graphite has the characteristic of sublimation by the thermal shock of the switching arc,and the produced carbon vapor is easy to condense into carbon powders and deposit in the switch.The impact of the type of dilution gas in a mixture of20%oxygen and 80%dilution gas on the sublimation and oxidation characteristics of the graphite electrode is investigated.It is found that when nitrogen dilution gas was replaced by argon,the heat flux to the electrodes decreased,which led to a 63%reduction of graphite sublimation.At the same time,the cooling rate of the arc was slower in argon,which promotes oxidation of the carbon vapor.The residual solid carbon can be reduced by 70%–85%by using argon as the dilution gas.Consequently,it is demonstrated that the stability and working life of the switch could be increased by appropriate selection of the dilution gas.

Langmuir-Blodgett assembly of ultra-large graphene oxide films for transparent electrodes

Monolayer ultra-large graphene oxide （UL-GO） sheets with diameter up to about 100 μm were synthesized based on a chemical method. Transparent conductive films were produced using the UL-GO sheets that were deposited layer-by-layer on a substrate by the Langmuir-Blodgett （L-B） assembly technique. The films produced from UL-GO sheets with a close-packed flat structure exhibit exceptionally high electrical conductivity and transparency after thermal reduction. A remarkable sheet resistance of 605 -/sq at 86% transparency is obtained, which outperforms the graphene films grown on a Ni substrate by chemical vapor deposition. The technique used to produce transparent conductive films is facile, inexpensive and tunable for mass production.

Consecutive induction melting of nickel-based superalloy in electrode induction gas atomization

The crucible-free electrode induction melting gas atomization（EIGA） technology is an advanced technology for preparing ultra-clean nickel-based superalloy powders. One of the key issues for fabricating powders with high quality and yield is the consecutive induction melting of a superalloy electrode. The coupling of a superalloy electrode and coil,frequency, output power, and heat conduction are investigated to improve the controllable electrode induction melting process. Numerical simulation results show that when the coil frequency is 400 kHz, the output power is 100 kW, superalloy liquid flow with a diameter of about 5 mm is not consecutive. When the coil frequency is reduced to 40 kHz, the output power is 120 kW, superalloy liquid flow is consecutive, and its diameter is about 7 mm.

Parametric study on the characteristics of a SDBD actuator with a serrated electrode

Active flow control based on surface dielectric barrier discharge（SDBD） has become a focus of research in recent years,due to its unique advantages and diverse potential applications.Compared with the conventional SDBD with straight electrodes,the serrated electrode-based SDBD has a great advantage due to its 3D flow topology.It is believed that the boundary layer separation of moving objects can be controlled more effectively with this new type of SDBD.In SDBD with a serrated electrode,the R（tip sharpness） and N（tip number per unit length） have a great influence on the discharge and induced airflow characteristics.In this paper,a parametric study of the characteristics of SDBD with a serrated electrode has been conducted with different ranges of R and N.Aspects of the power consumption,the steady medium temperature distribution,and the maximum induced airflow velocity have been investigated.The results indicate that there is a critical value of R and N where the maximum power consumption and induced airflow velocity are achieved.The uniformity of the steady temperature distribution of the medium surface is found to be more dependent on N.We found that the accelerating effects of the induced airflow can be evaluated with the Schlieren technique,which agree well with the results from the pitot tube.

Degradation of Phenol by Hydroxyl Radicals on Different Coating Lead Dioxide Electrodes

Lead dioxide electrodes on Ti substrates were prepared by thermal-deposition or electro-deposition. The amount of hydroxyl radicals generated at the electrodes prepared by the above-mentioned two methods was compared with that at the electrodes mingled with Bi or La prepared by electro-deposition. The experimental results indicate that the highest concentration of hydroxyl radicals generated by thermal-deposition, electro-deposition mingled with nothing, electro-deposition mingled with Bi or La was 0.781, 1.048, 1.838 or 2.044 μmol/L, respectively. When phenol was electrolyzed on the four electrodes at a current density of 30 mA/cm2, the removal efficiency of phenol after electrolysis for 1.5 h was 87.30%, 93.55%, 97.95% or 98.70%, TOC removal efficiency after electrolysis for 5 h was 86.76%, 94.26%, 98.53% or 99.60%, respectively. Through the degradation experiments of phenol, the amount of hydroxyl radicals was responsible for the removal efficiency of phenol. The electro-catalytic characteristics were investigated by SEM, the generation amount of hydroxyl radicals, the degradation degree of phenol and the stability and conductivity of the electrodes were also investigated. The experimental results indicate that the four electrodes all show good electro-catalytic characteristics; the electro-catalytic characteristics of the electrode mingled with La were superior to those of the other three ones, and the electrochemical degradation of phenol followed one-step reaction dynamics.

Spatial distribution characteristics of urban thermal conditions: application of GIS and remote sensing

The urban thermal distribution characteristics and its variation are dynamically monitored and synthetically analyzed by using GIS technology. The meteorological satellite data serve as main information source, assisted as auxiliary information sources by the landsat satellite TM data, land use thematic maps and meteorological observed data. A correlated pattern on the ground surface brightness temperatures and air temperatures has been studied and established with good performance of application.

Performance of a thermally regenerative ammonia-based battery using gradient-porous copper foam electrodes

Gradient-porous copper foam electrodes were applied to alleviate the adverse effects of the uneven current distribution of electrodes along the electrolyte flow direction in thermally regenerative ammonia-based batteries(TRABs).The results indicated that gradient-porous copper foam with a decreasing pore size(TRAB-LMS)provided the most uniform current distribution and generated the highest power density(15.5 W/m^(2)),total charge(1800 C)and energy density(1224 W h/m^(3)).With the increase in flow rate,the power density of the TRAB-LMS increased considerably within a certain range and then decreased slightly,with the optimal flowrate at 15 mL/min.Under the optimal flow rate,the performance of TRAB-LMS increased when the ammonia concentration rose from 0.5 to 2 M(1 M=1 mol L^(-1));however,it decreased slightly when the ammonia concentration further increased to 3 M.The slight decrease in the cathode potential suggested that the flow and ammonia concentration beyond the optional values facilitated not only the transfer of ammonia into the porous anode,but also the crossover of ammonia from the anode to the cathode.

Influence of calendering process on the structural mechanics and heat transfer characteristics of lithium-ion battery electrodes via DEM simulations

Elucidating the intricate correlation between calendering,structure,and performance is crucial to comprehending the relationship between performance parameters and process steps of lithium-ion batteries(LIBs).Discrete element method(DEM)simulations were adopted in this work to calculate the interparticle force and stress tensor under incremental calendering process conditions,which revealed the effect of the anisotropy of complex contact force network on the anisotropy of heat transfer within porous electrode.The thermal conductivity of electrode was predicted using porosity to characterize the process-structure-performance correlation.The comprehensive influence of contact number and con-tact area between particles and current collector determines the magnitude of interfacial thermal resistance and interfacial heat transfer coefficient.For the first time,this work quantitatively analyzed the structural mechanics and heat transfer mechanism during calendering process of porous electrodes,and the results indicate a promising way to optimize and design battery electrode structures.

Thermal conductivity of diamond/copper composites with a bimodal distribution of diamond particle sizes prepared by pressure infiltration method

The thermal conductivity of diamond/copper composites with bimodal particle sizes was studied. The composites were prepared through pressure infiltration of liquid copper into diamond preforms with a mixture of 40 and 100 pm-size diamonds. The permeability of the preforms with different coarse-to-fine volume ratios of diamonds was investigated. The thermal conductivity of the diamond/copper composites with bimodal size distribution was compared to the theoretical value derived from an analytical model developed by Chu. It is predicted that the diamond/copper composites could reach a higher thermal conductivity and their surface roughness could be improved by applying bimodal diamond particle sizes.

Effect of contact thermal resistance on temperature distributions of concrete-filled steel tubes in fire

To predicate the temperature distribution of concrete-filled steel tubes(CFSTs) being exposure to fire,a finite element analysis model was developed using a finite element package,ANSYS.A suggested value of contact thermal resistance was therefore proposed with the supporting of massive numbers of collected test data.Parametric analysis was conducted subsequently towards the cross-sectional temperature distribution of CFST columns in four-side fire,in which the exposure time,width of the cross section,steel ratio were taken into account with considering contact thermal resistance.It was found that contact thermal resistance has little effect on the overall temperature regulation with the exposure time,the width of cross-section or the change of steel ratio.However,great temperature dropping at the concrete adjacent to the contact interface,and gentle temperature increase at steel tube,exist if considering contact thermal resistance.The results of the study are expected to provide theoretical basis for the fire resistance behavior and design of the CFST columns being exposure to fire.

Thermal residual stresses and stress distributions under tensile and compressive loadings of short fiber reinforced metal matrix composites

The thermal residual stresses and the stress distributions of short fiber reinforced metal matrix composite under tensile and compressive loadings were studied using large strain axisymmetric elasto plastic finite element method. It is demonstrated that the thermal residual stresses can result in asymmetrical stress distributions and matrix plasticity. The thermal residual stresses decrease the stress transfer in tension and enhance the stress transfer in compression. The fiber volume fraction has more important effects on the thermal residual stresses and the stress distributions under tensile and compressive loadings than the fiber aspect ratio and the fiber end distance. [

A prediction model for the effective thermal conductivity of nanofluids considering agglomeration and the radial distribution function of nanoparticles

Conventional heat transfer fluids usually have low thermal conductivity, limiting their efficiency in many applications. Many experiments have shown that adding nanosize solid particles to conventional fluids can greatly enhance their thermal conductivity. To explain this anomalous phenomenon, many theoretical investigations have been conducted in recent years. Some of this research has indicated that the particle agglomeration effect that commonly occurs in nanofluids should play an important role in such enhancement of the thermal conductivity, while some have shown that the enhancement of the effective thermal conductivity might be accounted for by the structure of nanofluids, which can be described using the radial distribution function of particles. However, theoretical predictions from these studies are not in very good agreement with experimental results. This paper proposes a prediction model for the effective thermal conductivity of nanofluids, considering both the agglomeration effect and the radial distribution function of nanoparticles. The resulting theoretical predictions for several sets of nanofluids are highly consistent with experimental data.

Three-Component Model for Bidirectional Reflection Distribution Function of Thermal Coating Surfaces

We present a bidirectional reflection distribution function （BRDF） model for thermal coating surfaces based on a three-component reflection assumption, in which the specular reflection is given according to the microfacet theory and Snell＇s law, the multiple reflection is considered Nth cosine distributed, and the volume scattering is uniformly distributed in reflection angles according to the experimental results. This model describes the reflection characteristics of thermal coating surfaces more completely and reasonably. Simulation and measurement results of two thermal coating samples SR107 and S781 are given to validate that this three-component model significantly improves the modeling accuracy for thermal coating surfaces compared with the existing BRDF models.